Hi everyone
I´ve a problem, my usb port not working, so can´t charge ou even connect to pc.
EDIT: I´ve tryed with different usb cord ou usb chargers, same problem: can´t charge or connect to (any) pc. The problem is in usb phone.
Solution: go to SE support, Problem: X10 Mini Pro rooted and with modified rom.
So is that possible to flash an original rom (Vodafone Portugal) but using only the sdcard and xrecovery? Here i can get the original rom?
Best regards and many many thanks in advance.
All the best for you
I don't see any problem here. Charge your phone using socket in the wall
BMFDUARTE said:
Hi everyone
I´ve a problem, my usb port not working, so can´t charge ou even connect to pc.
Solution: go to SE support, Problem: X10 Mini Pro rooted and with modified rom.
So is that possible to flash an original rom (Vodafone Portugal) but using only the sdcard and xrecovery? Here i can get the original rom?
Best regards and many many thanks in advance.
All the best for you
Click to expand...
Click to collapse
You actually have no problem. Just buy a new USB cord.
I´ve used many diferent charges or usb cords, the problem is in usb phone, so i can´t connect to any pc or charge the batery That´s why i wan´t to downgrade so i could send phone to SE.
Don't tell them, that your phone is rooted and bring them power offed phone.
Mrakoris/ said:
Don't tell them, that your phone is rooted and bring them power offed phone.
Click to expand...
Click to collapse
it would still be the same. SE people needs to turn on phone to try to connect the phone. they would know if the phone has custom ROM.
@thread starter ( BMFDUARTE ):
- Find a thread at x10 mp section for you to download the back up file for the stock ROM. I have back up for stock ROM but it is impossible for me to upload it. Sorry.
-Just download the back up file and put it in your SD cards folder which would be "clockworkmod" or "xrecovery".
-Run the recovery in your phone and restore the downloaded back up file.
-After doing so, you should have the stock ROM back.
-There you can FOOL the SE people
Hey, you can give them phone, and they will fix it. Why are you afraid giving them phone with custom rom? They will fix your phone and you'll have to pay for it. Rooting your phone only disables your guaranty for the phone. That means you'll have to pay for their help.
SEUS says new software already installed
When I connect my e10i to SEUS for flashing back to stock rom its says new software alrready installed. this is happening after unlocking the bootloader and flashing nAa-08 kernel to the phone. PLZ HELP!!!!!!!!
Mrakoris/ said:
Hey, you can give them phone, and they will fix it. Why are you afraid giving them phone with custom rom? They will fix your phone and you'll have to pay for it. Rooting your phone only disables your guaranty for the phone. That means you'll have to pay for their help.
Click to expand...
Click to collapse
I only want to do that, cause the phone still has guaranty...and so i don´t to pay them, that´s why. If the warranty has finished, we weren´t having these topic, at least by me
Thaks
static28 said:
it would still be the same. SE people needs to turn on phone to try to connect the phone. they would know if the phone has custom ROM.
@thread starter ( BMFDUARTE ):
- Find a thread at x10 mp section for you to download the back up file for the stock ROM. I have back up for stock ROM but it is impossible for me to upload it. Sorry.
-Just download the back up file and put it in your SD cards folder which would be "clockworkmod" or "xrecovery".
-Run the recovery in your phone and restore the downloaded back up file.
-After doing so, you should have the stock ROM back.
-There you can FOOL the SE people
Click to expand...
Click to collapse
That´s the idea I just need to find the perfect file for that, backup or original rom
Thanks
BMFDUARTE said:
That´s the idea I just need to find the perfect file for that, backup or original rom
Thanks
Click to expand...
Click to collapse
great. ! hope it helps
sorry if I cant provide you my own back up.
Related
Basically, my phone USB connector, is for some reason not recognizing anything being plugged into it. I have tried a different cable and i get the same response :/ NOTHING!
Plug into the computer - Nothing
Plug into the wall - Nothing.
I need to flash my phone back to stock, but the only method i can think of is via USB, Over the Air updates are canceled out via the current software I have on my phone. So is their any other possible way ?
Thanks
I suffer from exactly your same issue.. sad 'cause i now have a very expensive brick .. Already covered the topic in my thread, but there is no evident resolution...
I suspect the USB circuit and/or port is defective , or poorly implemented, and breaks easily...
duffy1807 said:
Basically, my phone USB connector, is for some reason not recognizing anything being plugged into it. I have tried a different cable and i get the same response :/ NOTHING!
Plug into the computer - Nothing
Plug into the wall - Nothing.
I need to flash my phone back to stock, but the only method i can think of is via USB, Over the Air updates are canceled out via the current software I have on my phone. So is their any other possible way ?
Thanks
Click to expand...
Click to collapse
I would go in to your service provider, and hopefully you get an idiot who doesn't realise you were trying to root your Xperia, and they might replace it for you.
Thing thing is, it was going to be sent back for a repair. When the tech guys look at my firmware , they will realise I have rooted my phone, i was hoping to Un-root my phone and then send it back .. Or will this not matter?
Is their not a way to flash my phone back to normal, via the SD-Card?? somthing must be possible if Over Air is Possible..
Any Idea's anybody please?? thanks
duffy1807 said:
Thing thing is, it was going to be sent back for a repair. When the tech guys look at my firmware , they will realise I have rooted my phone, i was hoping to Un-root my phone and then send it back .. Or will this not matter?
Is their not a way to flash my phone back to normal, via the SD-Card?? somthing must be possible if Over Air is Possible..
Any Idea's anybody please?? thanks
Click to expand...
Click to collapse
I don't know what it would exactly do, but in the Second card
&. Phone storage section of the settings app, there's a factory data reset button, try that.
Keegan_P said:
I don't know what it would exactly do, but in the Second card
&. Phone storage section of the settings app, there's a factory data reset button, try that.
Click to expand...
Click to collapse
Hey mate, ive sorted it out i phoned up the Network Operater, and explained I wasnt a satisfied customer, because Ive had the same problem once before (this time i sent it through phones4u with a 30 day wait before i had my phone back :/..... ) Nevertheless Orange currier are coming out tommorow between 6-10 with a new phone battery and charger. which i couldnt knock back (probs reconditioned) but nvm .
Will try and make my phone as clean as possible without any root settings. before take my phone away and probs fix & reflash the phone to factory settings anyway so i dont think it makes any odd's what i do now .
am quite surprised the woman on the phone offered me this type of service, as I got the phone from Phones 4 u, bet yet Orange are the company doing my replacement.
Funny quote from the phone call :-
"Are you sure you for the phone from us sir?"
"erm, yes"
"Ive never seen this message on the system before, its saying your not one of our customers"
"I must be one of your customer's otherwise you wouldnt have all my details"
"Yes thats right ill just ignore the message and send you the replacement"
is there still no solution to this because i need to ship mine back for service.
Have you tried adbwireless apk. Allows you to connect to your phone via adb over your wireless network. You maybe able to modify bin4ys flash tool and flash wirelessly?
Worth a try?
wingz85 said:
Have you tried adbwireless apk. Allows you to connect to your phone via adb over your wireless network. You maybe able to modify bin4ys flash tool and flash wirelessly?
Worth a try?
Click to expand...
Click to collapse
Hey why don't you try Zdzihu's recovery menu? You can flash some of the ROMS from Jerpelea without touching a computer... Of course you'll need to download the ROM straight to your device...
Sent from my X10i
I've got this same problem too. (appologies for multi posting, I did search first).
No response since the upgrade. I'll look into Zdzihu's recovery menu.
If anyone gets any news, please shout.
OK put Zdzihu recovery on and flashed to Jerpelea's lite rom without the need for a USB....... however the problem still stands! Plug in the wall charger and nothing..... plug in PC USB and .... NOTHING.
I got this phone as a prototype before they were released, by a mate in the industry. So have no warrenty to send it back with. But I love the phone so any more ideas?
I have left it switched off to preserve the battery until a solution is found.
I remain hopeful!
Plz delete.
Sent from my X10i using XDA App
davidmit said:
OK put Zdzihu recovery on and flashed to Jerpelea's lite rom without the need for a USB....... however the problem still stands! Plug in the wall charger and nothing..... plug in PC USB and .... NOTHING.
I got this phone as a prototype before they were released, by a mate in the industry. So have no warrenty to send it back with. But I love the phone so any more ideas?
I have left it switched off to preserve the battery until a solution is found.
I remain hopeful!
Click to expand...
Click to collapse
What usb cable are you using? Did you get one WITH the phone from a friend, did it come with another phone, or did you buy it from a store? I used to work at RadioShack and we had different usb cables for different phones. The connector may be the same, but the pin position in the cable can be different. A normal looking USB cable that would come with say, a motorola phone couldn't be used to charge a blackberry despite the connection being the same port type.
jimbo77 said:
Hey why don't you try Zdzihu's recovery menu? You can flash some of the ROMS from Jerpelea without touching a computer... Of course you'll need to download the ROM straight to your device...
Sent from my X10i
Click to expand...
Click to collapse
would it be possible to restore the stock rom?
i need to reflash for to send it in to service.
I had this problem.. Only solution that I found was to send it back to rogers
It was a hardware problem apparently...
shukla said:
I had this problem.. Only solution that I found was to send it back to rogers
It was a hardware problem apparently...
Click to expand...
Click to collapse
Did they fix it or give you a new one and were you rooted? I have the same problem with the broken usb but I rooted and stripped all the bloatware and now have no way to flash back to stock rom. I still have the Rogers rom but streamlined.
Does anyone know how to put stuff back on like Timescape. I have all the apks from this forum and installed all the timescape stuff but it doesn't show up in the app drawer. If I clean up the phone and send it back will they know it was rooted keeping in mind that it is still the stock Rogers rom just with less crap on it.
I think one solution, since you already have Zdzihu's recovery menu, will be to ask someone who is using Rogers to create a backup image and upload it some where. Then you can use the restore tool from recovery menu and you'll be set up with Roger's again. Unfortunately I cannot help you with this since I'm in Guatemala but probably someone else can... I hope you can fix it men.
Jim
Sent from my X10i
davidmit said:
I got this phone as a prototype before they were released, by a mate in the industry. So have no warrenty to send it back with. But I love the phone so any more ideas?
Click to expand...
Click to collapse
I'm guessing if you got it for free, it wouldn't be too painful to actually buy one off eBay...
Ok, yeah, it's a stupid suggestion, but I guess you get what you pay for...
jimbo77 said:
I think one solution, since you already have Zdzihu's recovery menu, will be to ask someone who is using Rogers to create a backup image and upload it some where. Then you can use the restore tool from recovery menu and you'll be set up with Roger's again. Unfortunately I cannot help you with this since I'm in Guatemala but probably someone else can... I hope you can fix it men.
Jim
Sent from my X10i
Click to expand...
Click to collapse
yea that would work but i bought mine factory unlocked and im sending it back to sony ericsson so i just need a generic firmware. i tried looking to see if any one did a backup of a stock firmware but no luck
Edit: nevermind. found generic rom here http://forum.xda-developers.com/showpost.php?p=9134882&postcount=1 at the bottom. going to test now and see if it works.
Hey guys, would like some help here.
I have 6.1.3 (supose to be v61, but the number in the abbout is v7, dont ask me how)
After install Font Changer, and busy box 1.8, right after, the phone starts to:
a) hangs
b) cant get acess via xrecovey ( to reinstall rom )
c) FC constantly.
d) cant get install any apps ( its hangs and fc
e) the most important, CANT access the drop down menu, so cant link connect with usb. ( if i try to "drop" to autorize usb it hags.
f) cant not acess sd card, astro explorer doenst recognize "sd" as present... in fact the phone doenst recognize sd as present. Try to remove and checked in PC and everything is ok.
I know thats possible not a really rom problem but have no way out.
Thanks
I got out of possibilities, in how get installing the SE or modded rom.
So if someone can help, i would appreciate..
Reflash your firmware and start from scratch. The easiest and surest way.
BTW, try out EWJET custom ROM.
thats the point, i dont get install the SE rom. I remved the batery, put it back, press back button, connect the usb ( phone starts ) the SEUS recognize phone on boot, and... tell me to tap the usb connection...
the problems is, i just cant get drop the upper menu to allow usb connection...
by the way, debbuging is greyed out.
i just cant believe what is going on.
sasukewa said:
Reflash your firmware and start from scratch. The easiest and surest way.
BTW, try out EWJET custom ROM.
Click to expand...
Click to collapse
thats the point, i dont get install the SE rom. I remved the batery, put it back, press back button, connect the usb ( phone starts ) the SEUS recognize phone on boot, and... tell me to tap the usb connection...
the problems is, i just cant get drop the upper menu to allow usb connection...
by the way, debbuging is greyed out.
i just cant believe what is going on.
Never reinstall busy box after you flash a ROM. That's why you couldn't get back into xrecovery. But you have to start from scratch again like the Guy before me said.
Use flashtool. Do u need help with flashtool to get your phone working again?
Sent from XDA Premium from my X10a rooted running 2.2.1 Pure CM Rom from kxhawkins
thanks guys,
by now i feel like the problem cant be fix. I will try to use flashtool.
I will report the result.
Once again, thanks a lot.
AlexThePalex said:
thanks guys,
by now i feel like the problem cant be fix. I will try to use flashtool.
I will report the result.
Once again, thanks a lot.
Click to expand...
Click to collapse
You can definitely fix it. Like was already said installing busybox broke your ROM and recovery. Flashtool will be able to flash without issue.
Sent From My *Super Fly X10*
If I (or anyone for that matter!) help you, dont be afraid to press THANKS!
Voelker45 said:
Never reinstall busy box after you flash a ROM. That's why you couldn't get back into xrecovery. But you have to start from scratch again like the Guy before me said.
Use flashtool. Do u need help with flashtool to get your phone working again?
Sent from XDA Premium from my X10a rooted running 2.2.1 Pure CM Rom from kxhawkins
Click to expand...
Click to collapse
With Flashtool i regain control of the phone. Xrecovery is working and sd card is back.. i didnt have to reflash, the tooll fix both problem.
Thaks once again.
i made a mistake today, i install other kernel in miui for locked bl by cobrato, then i boot the rom and its running the stock kernel, now i cannot open recovery and i already tried install manually but still the same problem, its hard for me to flash stock back because my usb port broken and i need to adjust it to make my computer detect the device.
is there any other way to fix my recovery without flashing?
Try This: http://forum.xda-developers.com/showthread.php?t=1054818
And take your X10 to be Repaired!
Lord_Baal said:
Try This: http://forum.xda-developers.com/showthread.php?t=1054818
And take your X10 to be Repaired!
Click to expand...
Click to collapse
thank you, really appreciate ur help
i have flash my phone 4-6 times i think ,finally got stock back and try to root and i need to adjust my cable so many times.
thinking to buy new phone if usb port cannot be repair.
Good to Hear that! =]
Hope you can repair it!
If you wouldn't mind, could you click on the "THANKS" button? =P
Hello all.
My Xperia X10 Mini Pro is stuck on bootloop as you can see on this video
http://youtu.be/EhaBn0uuSvE
It just got like that from one moment to the other..I was using stock ROM
I tried to flash with Flashtool with these ROMs
U20a_2.1udpt1_Generic
ST17i-Active_4.1.B.0.431-1254-6360_SONY
On the first ROM it gets 100% successfull but still cant boot !
This phone was bought on Portugal, so I dont know if the ROM makes any difference..
Need some advice please !
I've read somewhere that Gordon's Gate (part of Flashtool) can still access a phone even when it bootloops.
Could you document what steps you already took? Perhaps link to the article you followed? (Below is a list of certain steps one usually takes when installing custom ROMS, but they are by no means always necessary, could you perhaps indicate what you already did?)
Rooted Yes/No/Not Sure
ClockWorkMod installed Yes/No/Not Sure
Unlocked bootloader Yes/No/Not Sure
Custom kernel Yes/No/Not Sure
The location of where the phone was bought will not make a lot of difference for the ROM. It might affect things like hardware keyboard layouts, but there are fixes available for those. But things like specific baseband and firmware are still important. By carefully reading the description, you can usually check if your phone can be used.
To be honest, I only have used Flashtool to flash new kernels to my X10 Mini Pro, for just installing another ROM I use ClockWorkMod.
What you can try:
Unbrick through SEUS: here (video)
I've read about people unbricking their devices with PC Companion, here.
If you should be able to regain access to the phone and still want to tinker:
This ROM works nice with the stock kernel
Later, you could unlock the bootloader, flash custom kernels (nAa ICS 04) and install ROMS needing such custom kernels (the U20 ICS ROMS, like MiniCM9)
Should you feel the need to ever unlock the bootloader, use this tool
Cheers and thanks for your post !
I used SEUS and updated to latest firmware but still no success on booting. It stills the same...
Rooted No
ClockWorkMod installed No
Unlocked bootloader No
Custom kernel Not Sure
Any chance that you can point me a stock rom and stock kernel to see if it boots that way?
JotaM07 said:
Cheers and thanks for your post !
I used SEUS and updated to latest firmware but still no success on booting. It stills the same...
Rooted No
ClockWorkMod installed No
Unlocked bootloader No
Custom kernel Not Sure
Any chance that you can point me a stock rom and stock kernel to see if it boots that way?
Click to expand...
Click to collapse
Don't update, repair... leave your phone unplugged when SEUS searches for updates, it can't recognise your phone when it's not connected and will give you a repair option. choose that, and make sure you select your phone from the list presented. it will then flash original kernel and firmware to your phone.
Don't know which kernel you flashed before you got this bootloop, but the second rom you mentioned in your opening post isn't even for your phone, so i guess you got confused with what goes for your phone. You don't even get a kernel logo, so i guess you flashed a kernel for a different model altogether, or your stock kernel got corrupted. a repair should fix it.
I'm now updating on PC Companion like belgianguy said
If unsuccessfull I'll follow your instructions, thanks a lot in advance !
Same on PC Companion..no boot !
SmG67, I dont see any repair option on SEUS. It detects the phone and says thar it's updated. If I remove the battery while is searching my phone it keeps saying that it's updated. What am I doing wrong ?
On PC Companion I got the Repair option, it repaired, but...surprise...still can't boot !
JotaM07 said:
Same on PC Companion..no boot !
SmG67, I dont see any repair option on SEUS. It detects the phone and says thar it's updated. If I remove the battery while is searching my phone it keeps saying that it's updated. What am I doing wrong ?
On PC Companion I got the Repair option, it repaired, but...surprise...still can't boot !
Click to expand...
Click to collapse
That's a shame... because you now have all official sony ericsson firmware on your phone, kernel and rom... If it's still not booting the kernel, there's nothing you can do about it, maybe a repair-shop might be able to fix it.
Well, a repair-shop isnt able to fix it because the mini-usb port has bad contact and they consider this phone out of warranty because of that ! It almost never happens that bad contact..
JotaM07 said:
Well, a repair-shop isnt able to fix it because the mini-usb port has bad contact and they consider this phone out of warranty because of that ! It almost never happens that bad contact..
Click to expand...
Click to collapse
Well if it's that far gone it might very well be a hardware issue. But just to be sure, could you start Flashtool and see if it still recognizes the device (see screenshot of what I see).
If it isn't able to, an older version of s1tool had an IDENTIFY option that required you plug the USB cable into the computer (but not in the phone), to shut down the phone, then push the BACK button and then plug the usb cable into the phone.
The bad contact you mentioned might be causing troubke as well, are you sure it isn't the cable that is at fault? Perhaps try to attach the USB cable in such a way that its not stressed and so that the phone cannot move (to prevent it from disconnecting due to a bad contact). Your flashes very well might have gone faulty because of that. But then again, the SEUS/PC Companion flashes seem to have succeeded, so hopefully Flashtool can shed some light here.
Hi all,
It seems my X10 mini pro is completely bricked.
Firstly I root my phone
after that I copied the xrecovery and made a restart, till then everything was rolling smoothly.
I backed up and reseted to factory settings. loaded the new update.zip and after the restart that was needed my phone briked
it's not a common brick. I can't use flashtools to recover it.
here is the problem that appears...
6/030/2013 18:30:20 - ERROR - ERR_SEVERITY="MAJOR";ERR_CLASS="SECURITY_CLASS";ERR_DYNAMIC="SIN header verification failed"
16/030/2013 18:30:20 - ERROR - Error flashing. Aborted
Click to expand...
Click to collapse
phone is not responding to any command. Plus it needs to be turned off if you wanna restore the backup you saved previously...when I try to flash it, phone turns ON
I read many guides in this forum to unbrick it but didn't find anything that suits to my occasion.
If any other detail is missing from my report please ask me to add it.
Sorry for my english
Thanks in advance.
Use SEUS to restore Download from:
SEUS
Dont forget to pull of your battery for 4 seconds, for turn off your phone before connect your phone.
gnickz0r said:
Hi all,
It seems my X10 mini pro is completely bricked.
Firstly I root my phone
after that I copied the xrecovery and made a restart, till then everything was rolling smoothly.
I backed up and reseted to factory settings. loaded the new update.zip and after the restart that was needed my phone briked
it's not a common brick. I can't use flashtools to recover it.
here is the problem that appears...
phone is not responding to any command. Plus it needs to be turned off if you wanna restore the backup you saved previously...when I try to flash it, phone turns ON
I read many guides in this forum to unbrick it but didn't find anything that suits to my occasion.
If any other detail is missing from my report please ask me to add it.
Sorry for my english
Thanks in advance.
Click to expand...
Click to collapse
Press home and power buttons together, it will restart the phone, then start pressing the back-button repeatedly to get back into recovery and restore your previous rom from there. (Come to think of it, following my last paragraph below, you probably don't have recovery on your phone anymore, so, as Rempty mentioned above, repairing with SEUS or PC Companion would be the start to recover your phone to a usable state,.)
The error flashtool gave you is because you didn't unlock the bootloader and didn't change the kernel on your phone. It can't flash any non-sony kernel on a locked bootloader.
What is this 'update.zip' you're talking about? Most full roms have more informational names to distinguish between different zips. An update.zip is usually only for hotfixes to ROMS already flashed, and not a complete ROM.
Thanks a lot guys. I solve my problem with SEUS.
Phone completely formated.
Love you guys
Hey guys I hve instaled xrecovery and minicm9 too on my x10 mini pro I hve wiped chache,etc nd when I reboot , it hangs on SE logo plz help me
SE logo?? You forgot to install nAa kernel, do you unlock bootloader??, remember that minicm9 is not for stock kernel.
Sorry for my bad english
Sent from my iPhone6 using xda business
W'll when I try to unlock the bootloader it gives error can u plz help me
william chauhan said:
W'll when I try to unlock the bootloader it gives error can u plz help me
Click to expand...
Click to collapse
use flash tool to unlock ur bootloader
make sure ur fone is rooted
Sent from my U20i using xda premium
I'm already using flashtool bt it's nt working
william chauhan said:
I'm already using flashtool bt it's nt working
Click to expand...
Click to collapse
What's your phone's build date? Ex.11w37(written on the stick placed on the back )
Sent From My BEAST , I mean X8
My build no. Is 2.1.1.A.0.6
Plzz help me..
Plz help me.. I try to unlock the boot loader .. and the phone bricked !!!! what am i going to do??
i try the PC COMPANION but my phone did not detect it..
this is what i did to bring back life to my x10 mp.
Switch phone completely off then if not already running start pc companion. then this step really got to me because of the phone constantly restarting, to get pc companion to detect the phone, i pressed and held the back key down and connected the usb cable just like flashing a new kernel. pc companion then detected the phone as x10. doesnt matter. then start the update and you must do the same thing again to force update service to detect the phone and to give the option to repair. then once thats done follow the prompts through update service, it will then ask you what phone you have, choose x10 mini pro and update.its a long process but be patient and your phone will work again.
Hey guys I used the flashtool to unlock the bootloader and I also followed the steps too but problem is when the phone was rebooted it didnt read the sim card now what should I do ? Please help
thas911 said:
this is what i did to bring back life to my x10 mp.
Switch phone completely off then if not already running start pc companion. then this step really got to me because of the phone constantly restarting, to get pc companion to detect the phone, i pressed and held the back key down and connected the usb cable just like flashing a new kernel. pc companion then detected the phone as x10. doesnt matter. then start the update and you must do the same thing again to force update service to detect the phone and to give the option to repair. then once thats done follow the prompts through update service, it will then ask you what phone you have, choose x10 mini pro and update.its a long process but be patient and your phone will work again.
Click to expand...
Click to collapse
my phone is in HARD BRICKED.. my phone is dead the phone didnt charge and totally dead.. what should i do?? help me??
i also have a hard bricked,even when i put it to charge the phone its not blink the led
help