Related
Basically, my phone USB connector, is for some reason not recognizing anything being plugged into it. I have tried a different cable and i get the same response :/ NOTHING!
Plug into the computer - Nothing
Plug into the wall - Nothing.
I need to flash my phone back to stock, but the only method i can think of is via USB, Over the Air updates are canceled out via the current software I have on my phone. So is their any other possible way ?
Thanks
I suffer from exactly your same issue.. sad 'cause i now have a very expensive brick .. Already covered the topic in my thread, but there is no evident resolution...
I suspect the USB circuit and/or port is defective , or poorly implemented, and breaks easily...
duffy1807 said:
Basically, my phone USB connector, is for some reason not recognizing anything being plugged into it. I have tried a different cable and i get the same response :/ NOTHING!
Plug into the computer - Nothing
Plug into the wall - Nothing.
I need to flash my phone back to stock, but the only method i can think of is via USB, Over the Air updates are canceled out via the current software I have on my phone. So is their any other possible way ?
Thanks
Click to expand...
Click to collapse
I would go in to your service provider, and hopefully you get an idiot who doesn't realise you were trying to root your Xperia, and they might replace it for you.
Thing thing is, it was going to be sent back for a repair. When the tech guys look at my firmware , they will realise I have rooted my phone, i was hoping to Un-root my phone and then send it back .. Or will this not matter?
Is their not a way to flash my phone back to normal, via the SD-Card?? somthing must be possible if Over Air is Possible..
Any Idea's anybody please?? thanks
duffy1807 said:
Thing thing is, it was going to be sent back for a repair. When the tech guys look at my firmware , they will realise I have rooted my phone, i was hoping to Un-root my phone and then send it back .. Or will this not matter?
Is their not a way to flash my phone back to normal, via the SD-Card?? somthing must be possible if Over Air is Possible..
Any Idea's anybody please?? thanks
Click to expand...
Click to collapse
I don't know what it would exactly do, but in the Second card
&. Phone storage section of the settings app, there's a factory data reset button, try that.
Keegan_P said:
I don't know what it would exactly do, but in the Second card
&. Phone storage section of the settings app, there's a factory data reset button, try that.
Click to expand...
Click to collapse
Hey mate, ive sorted it out i phoned up the Network Operater, and explained I wasnt a satisfied customer, because Ive had the same problem once before (this time i sent it through phones4u with a 30 day wait before i had my phone back :/..... ) Nevertheless Orange currier are coming out tommorow between 6-10 with a new phone battery and charger. which i couldnt knock back (probs reconditioned) but nvm .
Will try and make my phone as clean as possible without any root settings. before take my phone away and probs fix & reflash the phone to factory settings anyway so i dont think it makes any odd's what i do now .
am quite surprised the woman on the phone offered me this type of service, as I got the phone from Phones 4 u, bet yet Orange are the company doing my replacement.
Funny quote from the phone call :-
"Are you sure you for the phone from us sir?"
"erm, yes"
"Ive never seen this message on the system before, its saying your not one of our customers"
"I must be one of your customer's otherwise you wouldnt have all my details"
"Yes thats right ill just ignore the message and send you the replacement"
is there still no solution to this because i need to ship mine back for service.
Have you tried adbwireless apk. Allows you to connect to your phone via adb over your wireless network. You maybe able to modify bin4ys flash tool and flash wirelessly?
Worth a try?
wingz85 said:
Have you tried adbwireless apk. Allows you to connect to your phone via adb over your wireless network. You maybe able to modify bin4ys flash tool and flash wirelessly?
Worth a try?
Click to expand...
Click to collapse
Hey why don't you try Zdzihu's recovery menu? You can flash some of the ROMS from Jerpelea without touching a computer... Of course you'll need to download the ROM straight to your device...
Sent from my X10i
I've got this same problem too. (appologies for multi posting, I did search first).
No response since the upgrade. I'll look into Zdzihu's recovery menu.
If anyone gets any news, please shout.
OK put Zdzihu recovery on and flashed to Jerpelea's lite rom without the need for a USB....... however the problem still stands! Plug in the wall charger and nothing..... plug in PC USB and .... NOTHING.
I got this phone as a prototype before they were released, by a mate in the industry. So have no warrenty to send it back with. But I love the phone so any more ideas?
I have left it switched off to preserve the battery until a solution is found.
I remain hopeful!
Plz delete.
Sent from my X10i using XDA App
davidmit said:
OK put Zdzihu recovery on and flashed to Jerpelea's lite rom without the need for a USB....... however the problem still stands! Plug in the wall charger and nothing..... plug in PC USB and .... NOTHING.
I got this phone as a prototype before they were released, by a mate in the industry. So have no warrenty to send it back with. But I love the phone so any more ideas?
I have left it switched off to preserve the battery until a solution is found.
I remain hopeful!
Click to expand...
Click to collapse
What usb cable are you using? Did you get one WITH the phone from a friend, did it come with another phone, or did you buy it from a store? I used to work at RadioShack and we had different usb cables for different phones. The connector may be the same, but the pin position in the cable can be different. A normal looking USB cable that would come with say, a motorola phone couldn't be used to charge a blackberry despite the connection being the same port type.
jimbo77 said:
Hey why don't you try Zdzihu's recovery menu? You can flash some of the ROMS from Jerpelea without touching a computer... Of course you'll need to download the ROM straight to your device...
Sent from my X10i
Click to expand...
Click to collapse
would it be possible to restore the stock rom?
i need to reflash for to send it in to service.
I had this problem.. Only solution that I found was to send it back to rogers
It was a hardware problem apparently...
shukla said:
I had this problem.. Only solution that I found was to send it back to rogers
It was a hardware problem apparently...
Click to expand...
Click to collapse
Did they fix it or give you a new one and were you rooted? I have the same problem with the broken usb but I rooted and stripped all the bloatware and now have no way to flash back to stock rom. I still have the Rogers rom but streamlined.
Does anyone know how to put stuff back on like Timescape. I have all the apks from this forum and installed all the timescape stuff but it doesn't show up in the app drawer. If I clean up the phone and send it back will they know it was rooted keeping in mind that it is still the stock Rogers rom just with less crap on it.
I think one solution, since you already have Zdzihu's recovery menu, will be to ask someone who is using Rogers to create a backup image and upload it some where. Then you can use the restore tool from recovery menu and you'll be set up with Roger's again. Unfortunately I cannot help you with this since I'm in Guatemala but probably someone else can... I hope you can fix it men.
Jim
Sent from my X10i
davidmit said:
I got this phone as a prototype before they were released, by a mate in the industry. So have no warrenty to send it back with. But I love the phone so any more ideas?
Click to expand...
Click to collapse
I'm guessing if you got it for free, it wouldn't be too painful to actually buy one off eBay...
Ok, yeah, it's a stupid suggestion, but I guess you get what you pay for...
jimbo77 said:
I think one solution, since you already have Zdzihu's recovery menu, will be to ask someone who is using Rogers to create a backup image and upload it some where. Then you can use the restore tool from recovery menu and you'll be set up with Roger's again. Unfortunately I cannot help you with this since I'm in Guatemala but probably someone else can... I hope you can fix it men.
Jim
Sent from my X10i
Click to expand...
Click to collapse
yea that would work but i bought mine factory unlocked and im sending it back to sony ericsson so i just need a generic firmware. i tried looking to see if any one did a backup of a stock firmware but no luck
Edit: nevermind. found generic rom here http://forum.xda-developers.com/showpost.php?p=9134882&postcount=1 at the bottom. going to test now and see if it works.
Hi everyone
I´ve a problem, my usb port not working, so can´t charge ou even connect to pc.
EDIT: I´ve tryed with different usb cord ou usb chargers, same problem: can´t charge or connect to (any) pc. The problem is in usb phone.
Solution: go to SE support, Problem: X10 Mini Pro rooted and with modified rom.
So is that possible to flash an original rom (Vodafone Portugal) but using only the sdcard and xrecovery? Here i can get the original rom?
Best regards and many many thanks in advance.
All the best for you
I don't see any problem here. Charge your phone using socket in the wall
BMFDUARTE said:
Hi everyone
I´ve a problem, my usb port not working, so can´t charge ou even connect to pc.
Solution: go to SE support, Problem: X10 Mini Pro rooted and with modified rom.
So is that possible to flash an original rom (Vodafone Portugal) but using only the sdcard and xrecovery? Here i can get the original rom?
Best regards and many many thanks in advance.
All the best for you
Click to expand...
Click to collapse
You actually have no problem. Just buy a new USB cord.
I´ve used many diferent charges or usb cords, the problem is in usb phone, so i can´t connect to any pc or charge the batery That´s why i wan´t to downgrade so i could send phone to SE.
Don't tell them, that your phone is rooted and bring them power offed phone.
Mrakoris/ said:
Don't tell them, that your phone is rooted and bring them power offed phone.
Click to expand...
Click to collapse
it would still be the same. SE people needs to turn on phone to try to connect the phone. they would know if the phone has custom ROM.
@thread starter ( BMFDUARTE ):
- Find a thread at x10 mp section for you to download the back up file for the stock ROM. I have back up for stock ROM but it is impossible for me to upload it. Sorry.
-Just download the back up file and put it in your SD cards folder which would be "clockworkmod" or "xrecovery".
-Run the recovery in your phone and restore the downloaded back up file.
-After doing so, you should have the stock ROM back.
-There you can FOOL the SE people
Hey, you can give them phone, and they will fix it. Why are you afraid giving them phone with custom rom? They will fix your phone and you'll have to pay for it. Rooting your phone only disables your guaranty for the phone. That means you'll have to pay for their help.
SEUS says new software already installed
When I connect my e10i to SEUS for flashing back to stock rom its says new software alrready installed. this is happening after unlocking the bootloader and flashing nAa-08 kernel to the phone. PLZ HELP!!!!!!!!
Mrakoris/ said:
Hey, you can give them phone, and they will fix it. Why are you afraid giving them phone with custom rom? They will fix your phone and you'll have to pay for it. Rooting your phone only disables your guaranty for the phone. That means you'll have to pay for their help.
Click to expand...
Click to collapse
I only want to do that, cause the phone still has guaranty...and so i don´t to pay them, that´s why. If the warranty has finished, we weren´t having these topic, at least by me
Thaks
static28 said:
it would still be the same. SE people needs to turn on phone to try to connect the phone. they would know if the phone has custom ROM.
@thread starter ( BMFDUARTE ):
- Find a thread at x10 mp section for you to download the back up file for the stock ROM. I have back up for stock ROM but it is impossible for me to upload it. Sorry.
-Just download the back up file and put it in your SD cards folder which would be "clockworkmod" or "xrecovery".
-Run the recovery in your phone and restore the downloaded back up file.
-After doing so, you should have the stock ROM back.
-There you can FOOL the SE people
Click to expand...
Click to collapse
That´s the idea I just need to find the perfect file for that, backup or original rom
Thanks
BMFDUARTE said:
That´s the idea I just need to find the perfect file for that, backup or original rom
Thanks
Click to expand...
Click to collapse
great. ! hope it helps
sorry if I cant provide you my own back up.
Hi everyone,
I flashed incorrect kernel for my baseband and broke my x10 now it just stuck at se logo. I would just go into recovery but I'm pretty sure the charegmon file thats on my system at the moment is not monitoring the back button.
so no recovery
Phone is also not going into flashmode so i cant use flash tool to flash a new rom with correct kernel etc.
so no flash mode
Usb seems to be broken aswell since before i flashed incorrect kernel it would not charge any ideas on what i can do if anything.
so usb broken
my next port of call would be to send it in for repair on usb but prob not to sony center as its not stock and therefore void of warranty
Already have new phone and upgrade due (probably going to get s3 but would like to get this phone working too)
( When i switch on it vibrates once but no leds )
Thanks
gordonx10i said:
Hi everyone,
I flashed incorrect kernel for my baseband and broke my x10 now it just stuck at se logo. I would just go into recovery but I'm pretty sure the charegmon file thats on my system at the moment is not monitoring the back button.
so no recovery
Phone is also not going into flashmode so i cant use flash tool to flash a new rom with correct kernel etc.
so no flash mode
Usb seems to be broken aswell since before i flashed incorrect kernel it would not charge any ideas on what i can do if anything.
so usb broken
my next port of call would be to send it in for repair on usb but prob not to sony center as its not stock and therefore void of warranty
Already have new phone and upgrade due (probably going to get s3 but would like to get this phone working too)
( When i switch on it vibrates once but no leds )
Thanks
Click to expand...
Click to collapse
did you try flashing any stock ftf rom file using flashtool?
or repair using PCC or SEUS.
gordonx10i said:
Hi everyone,
I flashed incorrect kernel for my baseband and broke my x10 now it just stuck at se logo. I would just go into recovery but I'm pretty sure the charegmon file thats on my system at the moment is not monitoring the back button.
so no recovery
Phone is also not going into flashmode so i cant use flash tool to flash a new rom with correct kernel etc.
so no flash mode
Usb seems to be broken aswell since before i flashed incorrect kernel it would not charge any ideas on what i can do if anything.
so usb broken
my next port of call would be to send it in for repair on usb but prob not to sony center as its not stock and therefore void of warranty
Already have new phone and upgrade due (probably going to get s3 but would like to get this phone working too)
( When i switch on it vibrates once but no leds )
Thanks
Click to expand...
Click to collapse
Repair with Pc Companion or Update Service
Instructions:
Hold your back button (3button) , then connect with ur USB to x10 untill the LED light appear, after that wAAAit ur cpu install ur driver, then go pcc update ur phone, if it pop out that u have last software just continue it , AAAfter that all, ur bricked x10 hAAAve been repair
Hope helps
Superman™
It wont boot into flash mode or recovery , i know how to flash etc but i cant get it into flashmode (downloading mode) . Pc not picking it up either
Thanks anyways
Any other ideas
gordonx10i said:
It wont boot into flash mode or recovery , i know how to flash etc but i cant get it into flashmode (downloading mode) . Pc not picking it up either
Thanks anyways
Any other ideas
Click to expand...
Click to collapse
Then I guess you cant do anything about it
Also if if it wont boot in recovery or to the rom I dont think SE people can know that its running unofficial roms
gordonx10i said:
Hi everyone,
I flashed incorrect kernel for my baseband and broke my x10 now it just stuck at se logo. I would just go into recovery but I'm pretty sure the charegmon file thats on my system at the moment is not monitoring the back button.
so no recovery
Phone is also not going into flashmode so i cant use flash tool to flash a new rom with correct kernel etc.
so no flash mode
Usb seems to be broken aswell since before i flashed incorrect kernel it would not charge any ideas on what i can do if anything.
so usb broken
my next port of call would be to send it in for repair on usb but prob not to sony center as its not stock and therefore void of warranty
Already have new phone and upgrade due (probably going to get s3 but would like to get this phone working too)
( When i switch on it vibrates once but no leds )
Thanks
Click to expand...
Click to collapse
Hey gordonx10i, did you try with "x10_2.3_aro"?
Try flash by this, then try to start xRecovery into SEXperia
Check the following XDA Post: http://forum.xda-developers.com/showthread.php?p=16118511
Directly link provided by efx_d3
http://mir.cr/0OIDEZNA
Problem is device not even seen by pc anymore it so dunno how to get it into flash mode is there perhaps not a script exploit that can be run from sd card ......
Sent from my GT-P7500 using xda app-developers app
How to get back to stock even with a broken USB
While I think this might help you :
http://forum.xda-developers.com/showthread.php?t=1054818
Take care mate !
Apologies will try flashing 2.3.3 seems like it might work
Sent from my GT-P7500 using xda app-developers app
gordonx10i said:
Apologies will try flashing 2.3.3 seems like it might work
Sent from my GT-P7500 using xda app-developers app
Click to expand...
Click to collapse
You can try flashing stock ftf file download from link in my signature
To go in flash mode:
Take battery out
Connect your phone to pc via usb cable
Press back button continuously and insert battery simultaneously
Green led should go on
Sent from my X10
THeLogiC said:
You can try flashing stock ftf file download from link in my signature
To go in flash mode:
Take battery out
Connect your phone to pc via usb cable
Press back button continuously and insert battery simultaneously
Green led should go on
Sent from my X10
Click to expand...
Click to collapse
+1 on that
Always works
If you had ferakernel, you don't even need to hold back lol
Sent from my Xperia X10 using xda premium
gordonx10i said:
Apologies will try flashing 2.3.3 seems like it might work
Sent from my GT-P7500 using xda app-developers app
Click to expand...
Click to collapse
ARO 2.3.3 kernal saved my life bro, i think you'll have the same luck too go ahead with that :good:
Unbricked from se logo screen
THeLogiC said:
You can try flashing stock ftf file download from link in my signature
To go in flash mode:
Take battery out
Connect your phone to pc via usb cable
Press back button continuously and insert battery simultaneously
Green led should go on
Sent from my X10
Click to expand...
Click to collapse
thanx dude..
I have da same problem as gordonx10i
It worked for me from your firmware collection :good:
raghava_teja said:
thanx dude..
I have da same problem as gordonx10i
It worked for me from your firmware collection :good:
Click to expand...
Click to collapse
Glad it helped
Sent from my X10
does this method can fix my problem also?
also got stuck bootloader,
because of trying to unlock bootloader..
i guess its my fault, tryng to unlock while im in custom rom?
currently im downloading 2.3.3 stock rom,
and will try to flash it later..
ive tried already PCC and SEUS and still no luck.. (no available updates) =(
THeLogiC said:
Glad it helped
Sent from my X10
Click to expand...
Click to collapse
wow it works.. thnx! ive downloaded the rom in your link!! thnx a lot! ive managed to fix my fone.. =)
thanks!!
jrennald said:
wow it works.. thnx! ive downloaded the rom in your link!! thnx a lot! ive managed to fix my fone.. =)
thanks!!
Click to expand...
Click to collapse
No problem again
Sent from my X10
THeLogiC said:
No problem again
Sent from my X10
Click to expand...
Click to collapse
Remember guys X10 can't be bricked... it can always be unbricked and that too very easily all required is bit of patience to go through the forum
Sent from my Transformer TF101 using xda app-developers app
Well, I've got the bootloop problem while I was trying to root my Xperia Mini pro SK17i (I've installed a kernel and in the tutorial they said it's normal if the phone doesn't boot) and now I'm not able to JUST flash the files (at least to recover ). I'd say this because the device connect and disconnet infinite times.
Then, I'm really scared because I trusted and did the steps of this topic correctly I think I'm in a hardbrick situation.
Wether the phone at least stay connected I would be able to unbrick it.
But, I can't unbrick this phone,
COULD SOMEONE HELP ME? I don't know what I should do.
juninhoxps said:
Well, I've got the bootloop problem while I was trying to root my Xperia Mini pro SK17i (I've installed a kernel and in the tutorial they said it's normal if the phone doesn't boot) and now I'm not able to JUST flash the files (at least to recover ). I'd say this because the device connect and disconnet infinite times.
Then, I'm really scared because I trusted and did the steps of this topic correctly I think I'm in a hardbrick situation.
Wether the phone at least stay connected I would be able to unbrick it.
But, I can't unbrick this phone,
COULD SOMEONE HELP ME? I don't know what I should do.
Click to expand...
Click to collapse
ok, so u cannot flash back to stock with flashtool?
concerneth iconfa
juninhoxps said:
Well, I've got the bootloop problem while I was trying to root my Xperia Mini pro SK17i (I've installed a kernel and in the tutorial they said it's normal if the phone doesn't boot) and now I'm not able to JUST flash the files (at least to recover ). I'd say this because the device connect and disconnet infinite times.
Then, I'm really scared because I trusted and did the steps of this topic correctly I think I'm in a hardbrick situation.
Wether the phone at least stay connected I would be able to unbrick it.
But, I can't unbrick this phone,
COULD SOMEONE HELP ME? I don't know what I should do.
Click to expand...
Click to collapse
can you connect into fastboot or flashmode?!
Looks like someone got a crappy cable.
Try replacing it, my old cable used to crap on me too.
An improper Kernel or even a bootloop should not prevent you from getting into fastboot mode and reflashing.. Pixelado might be right..It could be a faulty cable or a loose connection.. try another cable or another computer maybe to check..
To better understand, tell us, did you follow that root guide that says:
Downgrade kernel to a 4.0.3 one -> use Doomlord exploit, re-upgrade to stock 4.0.4 kernel?
juninhoxps said:
Well, I've got the bootloop problem while I was trying to root my Xperia Mini pro SK17i (I've installed a kernel and in the tutorial they said it's normal if the phone doesn't boot) and now I'm not able to JUST flash the files (at least to recover ). I'd say this because the device connect and disconnet infinite times.
Then, I'm really scared because I trusted and did the steps of this topic correctly I think I'm in a hardbrick situation.
Wether the phone at least stay connected I would be able to unbrick it.
But, I can't unbrick this phone,
COULD SOMEONE HELP ME? I don't know what I should do.
Click to expand...
Click to collapse
Download your ROM Stock FTF and Flash on Modo Flashboot with Flashtools.
I follow this method to root my phone.. Its simple and easy to follow..
http://forum.xda-developers.com/showthread.php?t=1701357
if anything goes wrong just go to flashmode(pressing powerbutton+vol key down).. and reflash the stock ftf file..
it doesn't matter your phone get started or not you can still go to the flashmode .. :laugh:
juninhoxps said:
Well, I've got the bootloop problem while I was trying to root my Xperia Mini pro SK17i (I've installed a kernel and in the tutorial they said it's normal if the phone doesn't boot) and now I'm not able to JUST flash the files (at least to recover ). I'd say this because the device connect and disconnet infinite times.
Then, I'm really scared because I trusted and did the steps of this topic correctly I think I'm in a hardbrick situation.
Wether the phone at least stay connected I would be able to unbrick it.
But, I can't unbrick this phone,
COULD SOMEONE HELP ME? I don't know what I should do.
Click to expand...
Click to collapse
Hmmmmm...perhaps you might give us more info so everybody can help you out.....
Atleaset give us a proper info like....
1.What version is your XMP (Gingerbread or ICS) & it baseband........
2.Did you unlock your phone bootloader or not.......
3.What kernel did you flash into your phone.....
4.Which tutorial did you use to flash/root your phone........
Look in this: http://forum.xda-developers.com/showthread.php?t=1695514 thread to root your phone with ics
If you want gingerbread back first, just check out the rooting guide in my signature
Sent from my SK17i using xda app-developers app
Hi guys, i don't know how to solve a problem with my Sola. I read the recover soft-brick guide for xperia models but i can't solve it. I think i bricked.
When i try to turn on it's on Sony screen and there's nothing to do. I can use on flash mode and flash the kernel but the result is the same when i turn on. The led works like green in flash mode, or red when i finish the flash and the device is still connected. I have a locked bootloader, and all this happened when i wanted to restore a backup, i probably made a mistake: do a full wipe after that. I think that's is still in warranty, isnt' it? What can i do? There are some tips on the tutorial but i'm afraid to kill the battery or make other mistakes. Please help me guys.
And sorry for my bad english =(
brimbi said:
Hi guys, i don't know how to solve a problem with my Sola. I read the recover soft-brick guide for xperia models but i can't solve it. I think i bricked.
When i try to turn on it's on Sony screen and there's nothing to do. I can use on flash mode and flash the kernel but the result is the same when i turn on. The led works like green in flash mode, or red when i finish the flash and the device is still connected. I have a locked bootloader, and all this happened when i wanted to restore a backup, i probably made a mistake: do a full wipe after that. I think that's is still in warranty, isnt' it? What can i do? There are some tips on the tutorial but i'm afraid to kill the battery or make other mistakes. Please help me guys.
And sorry for my bad english =(
Click to expand...
Click to collapse
Have you tried to flash a stock firmware with flashtool?
elia222 said:
Have you tried to flash a stock firmware with flashtool?
Click to expand...
Click to collapse
Yes and flash is ok but when i turn on it's still on sony screen...i waited about 5 minutes. I tried with 6.1.1.B.1.54 and with 6.1.1.B.1.1.0 with same result. I know i have to wait after flash a stock firmware but i see it's too much time. Maybe because when i want to switch off i have to use hard reset (i mean with all 3 button). I don't know..thanks to reply in any case
brimbi said:
Yes and flash is ok but when i turn on it's still on sony screen...i waited about 5 minutes. I tried with 6.1.1.B.1.54 and with 6.1.1.B.1.1.0 with same result. I know i have to wait after flash a stock firmware but i see it's too much time. Maybe because when i want to switch off i have to use hard reset (i mean with all 3 button). I don't know..thanks to reply in any case
Click to expand...
Click to collapse
In any case, if you don't solve the issue by yourself, your phone is still in warranty (just don't say to the reparation service that you played with flashtool )
elia222 said:
In any case, if you don't solve the issue by yourself, your phone is still in warranty (just don't say to the reparation service that you played with flashtool )
Click to expand...
Click to collapse
Yep i hope. What can i do now? When i charge it turn on by itself and always on sony logo (but led is off)
Also when i flash and it's still on usb port the led is red but the device is off, i'm looking for a solution on RECOVER SOFT-brick thread but i don't know in which part am i.
brimbi said:
Yep i hope. What can i do now? When i charge it turn on by itself and always on sony logo (but led is off)
Also when i flash and it's still on usb port the led is red but the device is off, i'm looking for a solution on RECOVER SOFT-brick thread but i don't know in which part am i.
Click to expand...
Click to collapse
You tried with the Sony PC Companion/Update Service? It uses flashmode.. When I bricked my U i had relocked my bootloader and flashed via PC Companion... Worked for me :fingers-crossed:
Press thanks if I helped:good:
Try to start from the beginning, and follow the instructions carefully.
dotafan said:
You tried with the Sony PC Companion/Update Service? It uses flashmode.. When I bricked my U i had relocked my bootloader and flashed via PC Companion... Worked for me :fingers-crossed:
Press thanks if I helped:good:
Click to expand...
Click to collapse
But i have a locked bootloader, will i invalidate warranty? i'm going to try with pc companion =)
No it won't!!
If you were on a custom rom flash kernel/ftf via flashtool nd then use PC Companion:thumbup:
Sent from my ST25i using xda app-developers app
It works!!!!!!!!
dotafan said:
No it won't!!
If you were on a custom rom flash kernel/ftf via flashtool nd then use PC Companion:thumbup:
Sent from my ST25i using xda app-developers app
Click to expand...
Click to collapse
It works! My sola works now! Thank you guys! Thank you very much!
brimbi said:
It works! My sola works now! Thank you guys! Thank you very much!
Click to expand...
Click to collapse
Glad I could help :good: