Hello... looking for anyone who can help me. The problem I am having is when I charge the phone or let it sit idle for awhile I will show no signal on the status bar. When I go into settings --- status ---- it shows I have a signal which should be close to full bars. I can not make a call or send text messages which makes sense because the status bar is showing no signal, however I can still receive calls and text messages. The only way I have found to correct this is to reboot the phone. I am currently rooted and unlocked running Dorian's redpill hybrid. I was also experiencing this with bat2f so I thought I would switch roms to see if it was a bad flash. I have also reflashed my radio N_01.77.30P several times with no change. I am also using clemsyns 1.0ghz elite kernel and undervolted with set CPU. I hope someone can help me with this problem, thank you to anyone who reads this and chimes in.
Thanks
Sent from my MB860 using Tapatalk
Try newer 36P radio in Fruitcakes thread.
Sent from my MB860 using xda premium
Caelan is it possible for you to link the thread where you can find that radio?? For some reason when I use search on taptalk it doesn't pull up anything to do with fruitcakes... the only fruitcake I found was for German users. Thanks caelan for your advice... once I find that radio I will try it out and let you know what happens.
Sent from my MB860 using Tapatalk
Mphill46 said:
Caelan is it possible for you to link the thread where you can find that radio?? For some reason when I use search on taptalk it doesn't pull up anything to do with fruitcakes... the only fruitcake I found was for German users. Thanks caelan for your advice... once I find that radio I will try it out and let you know what happens.
Sent from my MB860 using Tapatalk
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=1163009
Related
about to flash celb rom on my phone and i remember when i flashed it with evil eris 3.0 i dialed a bunch of different numbers to get better signal and update the cell towers?!?!?! lol also another number to go into the phone and change it to auto cdma. anyone know what those numbers or what to dial to get better cell signal after flashing a rom? also what you have to do to program it right off the bat also?
thanks
Cheatman1 said:
about to flash celb rom on my phone and i remember when i flashed it with evil eris 3.0 i dialed a bunch of different numbers to get better signal and update the cell towers?!?!?! lol also another number to go into the phone and change it to auto cdma. anyone know what those numbers or what to dial to get better cell signal after flashing a rom? also what you have to do to program it right off the bat also?
thanks
Click to expand...
Click to collapse
You can't update your prl through a froyo rom on the eris yet, but flashing a new rom shouldn't change the changes you made on the 2.1 rom, if I understand your question righit about the battery, 1st step- search forums for recalibrate battery step 2-read post and follow instructions
Sent from my FroyoEris using XDA App
One of the # I think your thinking of is *228 then 2
Sent from my Tazz Froyo using XDA App
BrownEye02 said:
One of the # I think your thinking of is *228 then 2
Sent from my Tazz Froyo using XDA App
Click to expand...
Click to collapse
thats one then there is another one. ... 4 numbers with starts and number signs #*#*3333*#*# something like that?
That is for the epst app we do not have one that works with froyo. Flash the prl in plain Jane and flash up the roms don't change the prl. Also keep in mind that the bars on the froyo roms are liniar instead of the "optimized" versions found in stock and sense Roms the signal strength is the same just appears lower
Sent from my FroyoEris using XDA App
Delvaris said:
That is for the epst app we do not have one that works with froyo. Flash the prl in plain Jane and flash up the roms don't change the prl. Also keep in mind that the bars on the froyo roms are liniar instead of the "optimized" versions found in stock and sense Roms the signal strength is the same just appears lower
Sent from my FroyoEris using XDA App
Click to expand...
Click to collapse
still in evil eris 3.0 and wonder what rom i should try next.
up top up bump
I am using Bionix 1.3.1 and have an issue of not receiving phone calls or texts(sometimes). I will not even have a notification or anything or any indication whatsoever someone has called. Does anyone know what I should do?
cpg1987 said:
I am using Bionix 1.3.1 and have an issue of not receiving phone calls or texts(sometimes). I will not even have a notification or anything or any indication whatsoever someone has called. Does anyone know what I should do?
Click to expand...
Click to collapse
Uh, pay your bill. J/K could be you have a bad flash. Try flashinh again see if that fixes it
Sent from my SGH-T959 using XDA App
If reflashing the rom doesn't work, try flashing a different modem.
The modems are posted in the development section, just search the first 3 pages.
Sent from my SGH-T959 using XDA App
and if all that doesnt work which i hope it does u can always go back to old reliable going back to stock with odin.
thanks..im going to try and reflash and see if that works!!
cpg1987 said:
thanks..im going to try and reflash and see if that works!!
Click to expand...
Click to collapse
did reflash work?
I recently flashed the latest AOSP MIUI rom from Comrom 2.1. I have a flashed cricket samsung fascinate and I was wondering why my 3g flickers on and off and refuses to work. If there is a fix for this, PLEASE let me know! Thank you
I have not verizone operator and my 3g not working
I flash CM7 from evil 3.6
I dont have drivers cm7 for xp/win7 for QPST!!!!!
HelPPP!!!
evil 3.6 i have not problem with 3g and drivers
Data does not work on non verizon phones when flashed to a CM7 based rom. And I believe JT said he wasn't going to do anything about it. And since Cyanogenmod will take over the builds, I doubt it will happen.
I back to the evil 3.6 and my 3g work good
I have non verizone operator
Alright thank you that's good to know
Sent from my SCH-I500 using XDA App
DoobiHowserMD said:
Data does not work on non verizon phones when flashed to a CM7 based rom. And I believe JT said he wasn't going to do anything about it. And since Cyanogenmod will take over the builds, I doubt it will happen.
Click to expand...
Click to collapse
Just for clarification, I have a Verizon phone activated on Page Plus and data worked fine right out of the box using custom TouchWiz ROMs. Based on your response quoted above it sounds like my data should still work since I am using a Verizon phone and their network even though I am not a Verizon customer? Or is it more complicated then that?
I've just started looking into CM7 and MIUI and found a couple of posts concerning data access but wasn't clear on my situation. Maybe Page Plus hasn't been mentioned directly or more likely my search skills suck. Either way, thanks for any help you (or anyone) can provide.
I'm have same problem. I have cricket also and can't get 3g to stay on. even when i wiped and flashed another rom it still flashes on and off. i have to do a complete factory restore to fix it.
Palinn said:
Just for clarification, I have a Verizon phone activated on Page Plus and data worked fine right out of the box using custom TouchWiz ROMs. Based on your response quoted above it sounds like my data should still work since I am using a Verizon phone and their network even though I am not a Verizon customer? Or is it more complicated then that?
I've just started looking into CM7 and MIUI and found a couple of posts concerning data access but wasn't clear on my situation. Maybe Page Plus hasn't been mentioned directly or more likely my search skills suck. Either way, thanks for any help you (or anyone) can provide.
Click to expand...
Click to collapse
Might be different for page plus go ahead and try. I know us cellular works fine on cm7 as I've seen it mentioned a few times.
Sent from my SCH-I500 using Tapatalk
Cricket/Metro users please go to this thread below and try that out, I was able to get data up and running and thanks to that I have half my mms working *I can receive mms* And if it works please post back and thank massaint. Good Luck!
http://forum.xda-developers.com/showthread.php?t=1188097
Junkboy0 said:
Cricket/Metro users please go to this thread below and try that out, I was able to get data up and running and thanks to that I have half my mms working *I can receive mms* And if it works please post back and thank massaint. Good Luck!
http://forum.xda-developers.com/showthread.php?t=1188097
Click to expand...
Click to collapse
what files i need to edit to make it work on Intertelecom? i've tried to edit apns-conf with no result
can anyone help?
my operator settings are
mcc=255
mnc=04
user=IT
pass=IT
zaliva said:
what files i need to edit to make it work on Intertelecom? i've tried to edit apns-conf with no result
can anyone help?
my operator settings are
mcc=255
mnc=04
user=IT
pass=IT
Click to expand...
Click to collapse
I'm sorry I have no idea what you would have to edit. Sorry
Do you know if that would work with CM7 or strictly MIUI?
Fascinatingly sent from XDA app
randum0city said:
Do you know if that would work with CM7 or strictly MIUI?
Fascinatingly sent from XDA app
Click to expand...
Click to collapse
Miui only atm, I'm testing editing build props but I have almost no idea what I'm doing.
Sent from my I500 using Tapatalk
Is there any fix for non verizon users to get data working on gingerbread?, or anyone knows if recent cm7 builds fix that?
Sent from my SCH-I500 using XDA App
thermom said:
Is there any fix for non verizon users to get data working on gingerbread?, or anyone knows if recent cm7 builds fix that?
Sent from my SCH-I500 using XDA App
Click to expand...
Click to collapse
Please read over the thread, and Miui is GB.
Sent from my I500 using Tapatalk
thermom said:
Is there any fix for non verizon users to get data working on gingerbread?, or anyone knows if recent cm7 builds fix that?
Sent from my SCH-I500 using XDA App
Click to expand...
Click to collapse
Please. Read the thread.
Sent from my SCH-I500 using XDA App
zaliva said:
what files i need to edit to make it work on Intertelecom? i've tried to edit apns-conf with no result
can anyone help?
my operator settings are
mcc=255
mnc=04
user=IT
pass=IT
Click to expand...
Click to collapse
Please do enjoy this ...
http://forum.xda-developers.com/showthread.php?t=1232440
I'm on cm 7 with the newest radio and I have no signal can anybody help I need my phone!
Sent from my LG-VM670 using Tapatalk
Sent from my LG-VM670 using Tapatalk
Try downloading a very stable rom (like anything.... doesn't matter what) and switching the phone signal files
EDIT: DO NOT DO THIS!!!!!! THIS WONT WORK.... SORRY I CANT HELP YOU BUT DO NOT TRY THIS METHOD
Sent from my T-Mobile myTouch 3G Slide using xda premium
is this a new ROM installation? If so go back to the previous working ROM you were using. I've actually gone back to the Froyo CM 6.1.1 on my phone to go back to basics. CM7 is a nice ROM, but still has it's glitches.
It happened when I put cm7 on so yeah I switched it up and still nothing
nt from my LG-VM670 using Tapatalk
Basic Troubleshooting
So as a side note, I'm pretty sure this thread doesn't go in the dev forum.
On to the troubleshooting:
FIRST & MOST IMPORTANT STEP
1. Does you have the same problem if you put your sim in another phone?
if yes, then it is a sim/network problem and you will have to call your carrier.
(DON'T TELL THEM YOU'VE BEEN RUNNING CUSTOM ROM'S! lazy call center
reps will tell you that is why your sim/service isn't working so they don't have to
put any work into fixing your problem)
if no, then continue to step 2.
2. What happens when you try to place a call?
Do you see or hear an error message?
3. What does your phone think the status of its calling abilities are?
does it show signal strength? does it show any unusual icons in the status bar?
4. is the problem location specific?
have you tested the phone at least 7 miles from the location where your first experienced the problem? are other peoples phones on the same service having the same problem as you?
Check the wifi calling app and make sure it is not set to WIFI ONLY. This will disable your radio.
Fixed thanks guys
Sent from my LG-VM670 using Tapatalk
My Thunderbolt is rooted, but no matter what ROM I flash i can't get service. This happened after installing CM7. I have tried flashing different ROMs, updating radios, and returning to stock. But no dice. I can get the phone into HBOOT and Recovery, and the phone will boot, but when it says to select language, and then goes to the Activation screen, it just says "Activating..." and does nothing else. Any ideas, or a fix would be very helpful! Thanks!
EDIT: Problem was fixed by flashing most recent Radio. When i flashed CM7 for some reason it deleted my radio files.. hmm
Sounds like something mighta broke after flashing. I'd flash 605.9 and give big red a call. I know not much help, but sounds like you tried everything else. Good luck
I know you said different Roms, but you try a sense ROM?
i know its basic but you have the backplate attached right its needed to get signal
Sent from my HTC ThunderBolt using xda premium
Lol yes backplate is on. I just checked "about phone" and it says "baseband unknown" I think I have the wrong radio. I am going to search for the MR1 radio and install. I am running CM7, any idea on most recent radio?
Sent from my SCH-I800 using XDA App
And yes I have tried sense and desensed roms. I am currently running CM7 AOSP.
Sent from my SCH-I800 using XDA App
I am also looking for the best radio radio's for cm7 links please
sent from CM7 Tbolt using tapatalk
monkeyboy19762 said:
I am also looking for the best radio radio's for cm7 links please
sent from CM7 Tbolt using tapatalk
Click to expand...
Click to collapse
I flashed the most recent radio with ADB. Ran into a bunch of issues using the "flash_image" method.
Here is the link for all the radios:
http://forum.xda-developers.com/showthread.php?t=1048128
Hope this helps