Related
Hi all Finally received my Transformer Prime yesterday and this device is truly amazing(coming over from the Transformer which i love as well). I was disappointed though when i connected to WIFI and experienced super low speeds.At Close range 4 down 3 up and medium 700 kbps down and 300kbps up(for the record i usually get 17 down and 5 up with my Galaxy Nexus and Transformer1 ). Although the speed is not great i figured a firmware updates would fix the issue. Fast forward to this morning at where I decided to try the Prime connected to my normally slower work network and I'm receiving a pimg of 5ms and 10 down and 27 up! This all leads me to the conclusion that there are setting on my router that need to be changed or a router model that is better than others for the Transformer Prime. I'm currently using the Trendnet Dual band 450Mbps Wireless N Gigabit Router( simultaneous 5ghz and 2.4ghz broadcast with wep security on the2.4 frequency) but i can test my oldish Dlink 655 N router tonight.
Anyone having luck or failure with their router configs or models let us know and maybe we can figure out what routers or settings work best of our new Prime.
I know the 5ghz on the prime is not enabled, so it can't see that frequency, that might be part of your problem at home. also use wifi analyzer to figure out which frequency has the least interference from other wifi signals nearby.
theoilman said:
I know the 5ghz on the prime is not enabled, so it can't see that frequency, that might be part of your problem at home. also use wifi analyzer to figure out which frequency has the least interference from other wifi signals nearby.
Click to expand...
Click to collapse
Its possible but the 5ghz is a separate frequency so it should not effect the 2.4ghz spectrum. As for WiFi analyzer thanks for the advice ill try that tonight as well.
I don't have a solution, but I think I know what a pretty big contributing factor is towards some people saying WiFi is on par with other devices, and others saying it is not.
I've seen this mentioned in another WiFi thread by another user, but hasn't really gotten much attention, so I figured it deserved its own thread so people see it.
It appears that for some reason, the Prime does not like wireless N networks unless it is extremely close to the router. For example, when using wireless N, my Prime will pull over 30 Mbps when within 5 feet of my router. However, as soon as I start walking away, the Prime drops in speed at an embarrassingly bad rate. It goes from about 30 Mbps down to 3 Mbps down at about 20 feet away from my router. My other devices (Galaxy Nexus, iPad1, laptop) do not exhibit this behavior.
However, if you're using a wireless G network instead, the dropoff isn't nearly as significant. For example, when using wireless G, I'll pull about 19 Mbps when directly near the router, and still get about 9-13 Mbps when 20 feet away from the router, which is somewhat on par with my other devices.
My conclusions:
1) The Prime does not work well with wireless N networks
2) People who see speeds consistent with their other devices when not near their routers likely do not have a wireless N router (or have wireless N disabled).
Does anyone have any opinion on whether this may be software related?
Im finding exactly that rubbish WiFi on the Prime as soon as I walk away from my N-series router.
There definitely is something wrong with the Primes WiFi with mine, could be firmware related.
Sent from my Transformer Prime TF201 using Tapatalk
ToneyEricsson said:
Im finding exactly that rubbish WiFi on the Prime as soon as I walk away from my N-series router.
There definitely is something wrong with the Primes WiFi with mine, could be firmware related.
Sent from my Transformer Prime TF201 using Tapatalk
Click to expand...
Click to collapse
Have you tried switching to G only mode to see if the Prime performs better? I know it may not be a permanent or acceptable solution, but that's what I'm doing for the time being, as I live in a relatively small apartment and don't need the increased range of wireless N.
The fact that the Prime can pull decent speeds at a decent range while on wireless G only has me hopeful that it is not hardware related, and can indeed be fixed (e.g., improved) with firmware.
nyijedi said:
Have you tried switching to G only mode to see if the Prime performs better? I know it may not be a permanent or acceptable solution, but that's what I'm doing for the time being, as I live in a relatively small apartment and don't need the increased range of wireless N.
The fact that the Prime can pull decent speeds at a decent range while on wireless G only has me hopeful that it is not hardware related, and can indeed be fixed (e.g., improved) with firmware.
Click to expand...
Click to collapse
I only have N here, all other devices work good apart from the Prime.
I tried using WiFi Analyzer to see which channel was best being 11 as my router was set to auto but that made no difference on the Prime.
Sent from my Transformer Prime TF201 using Tapatalk
ToneyEricsson said:
I only have N here, all other devices work good apart from the Prime.
I tried using WiFi Analyzer to see which channel was best being 11 as my router was set to auto but that made no difference on the Prime.
Sent from my Transformer Prime TF201 using Tapatalk
Click to expand...
Click to collapse
If you want to try it out, most, if not all N routers allow you to disable N and only transmit on a, b, or g. That's what I did on my N router. I changed transmission from 802.11a/b/g/n to 802.11g only.
I concur that all other devices work great on N except for the Prime, which is annoying.
I have AT&T Uverse and there wireless router is b/g only. I get download speeds of 12mbps in my plan. I was getting 11.3 to 11.5 on my OG IPad and my TFP oh and my motorola Atrix at any place in my house or my decks. Same ranges. My router is in the middle of my home so I'm probably no more than 50-75 feet from it.
So, I feel there could be credibility to what the OP says based on my setup.
Thanks a lot for this post. My router is only G and B but I decided to test this myself so I changed my router from Mixed to G-only and it increased my speeds by over 3MB/s (5MB/s to 8.1MB/s) when downstairs in my living room. I thought my previous tests were strange when it would sometimes spike up to 8MB/s but finish on 5MB/s everytime.
Anyway, very useful post which could help many on here. Maybe this could be fixed in a firmware update or do you reckon the Wi-Fi recievers in the Prime are designed that way?
My Wirless N router works fine with the Prime at both short and long distances.
SamB12 said:
My Wirless N router works fine with the Prime at both short and long distances.
Click to expand...
Click to collapse
I agree mine work fine also, i have a cape cod style house and my N router is in my basement I get 2 bars of strength in the "attic" part of my house, running about 12-13mps. Even when i run Wifi Analyzer on both my Galaxy Nexus and my Prime they are both very much the same DB.
I've got to say I think the Wi-Fi issues are software, not hardware. Using Wi-Fi analyzer, with my thunderbolt and prime in same location they have the same signal strength, but the thunderbolt is much faster downloading. I don't think the back is the problem with the prime WiFi, and they should be able to fix it with a firmware update.
Someone else also suggested that you can get better/higher wifi speeds with a lower channel. People have tried switching to channels 1 and 3. Maybe while trying ONLY 802.11g, try also using N at lower channels.
Lower channels = lower frequency = higher energy, which may be better able to get through the aluminum back and improve speeds?
nyijedi said:
I don't have a solution, but I think I know what a pretty big contributing factor is towards some people saying WiFi is on par with other devices, and others saying it is not.
I've seen this mentioned in another WiFi thread by another user, but hasn't really gotten much attention, so I figured it deserved its own thread so people see it.
It appears that for some reason, the Prime does not like wireless N networks unless it is extremely close to the router. For example, when using wireless N, my Prime will pull over 30 Mbps when within 5 feet of my router. However, as soon as I start walking away, the Prime drops in speed at an embarrassingly bad rate. It goes from about 30 Mbps down to 3 Mbps down at about 20 feet away from my router. My other devices (Galaxy Nexus, iPad1, laptop) do not exhibit this behavior.
However, if you're using a wireless G network instead, the dropoff isn't nearly as significant. For example, when using wireless G, I'll pull about 19 Mbps when directly near the router, and still get about 9-13 Mbps when 20 feet away from the router, which is somewhat on par with my other devices.
My conclusions:
1) The Prime does not work well with wireless N networks
2) People who see speeds consistent with their other devices when not near their routers likely do not have a wireless N router (or have wireless N disabled).
Does anyone have any opinion on whether this may be software related?
Click to expand...
Click to collapse
1. What channel are you using on the N band? Also, what router and firmware?
As for testing at this point I am pulling 36Mbps on N at 15 feet and 34Mbps on G (on a Netgear WNDR4500 or ASUS RT-N56U). We will look into this behavior shortly.
Many wifi problems stem from suboptimal router configuration. Mixed-mode use (as opposed to G-only or N-only) can also cause speed degradation.
Suggest some simple steps to troubleshoot slow wifi speed:
http://www.smallnetbuilder.com/wireless/wireless-basics/30664-5-ways-to-fix-slow-80211n-speed
Alternately, you can try a different router or access point, either as replacement or in tandem with the existing unit.
Great idea making this thread as I was going to make similar one but never got around to after fiasco in other thread..lmfao.
There was this guy that posted he was going to return his Prime because his wifi wasn't acting right and he was slow downloads speeds and big dropoffs n such. I told him the exact same things you posted here. Be came back n thanked me n said That did the trick. Now his wifi is working great and is on par with his other devices. So now he is keeping his Prime.
Ill bet you that majority of people experiencing wifi issues are because of the reasons stated in this post. A simple network settings change can can make a night n day difference in wireless performance.
This thread should be stickied also or merged with other one then stickied. This will help alot of people out having wifi issues. And its such a simple n fast fix also.
---------- Post added at 04:44 PM ---------- Previous post was at 04:42 PM ----------
nhshah7 said:
Someone else also suggested that you can get better/higher wifi speeds with a lower channel. People have tried switching to channels 1 and 3. Maybe while trying ONLY 802.11g, try also using N at lower channels.
Lower channels = lower frequency = higher energy, which may be better able to get through the aluminum back and improve speeds?
Click to expand...
Click to collapse
this was said to be true also. I saw that thread that had same info in it.
Gary Key said:
1. What channel are you using on the N band? Also, what router and firmware?
As for testing at this point I am pulling 36Mbps on N at 15 feet and 34Mbps on G (on a Netgear WNDR4500 or ASUS RT-N56U). We will look into this behavior shortly.
Click to expand...
Click to collapse
Gary,
Thank you very much for looking into this. I ran some additional tests so I could supply you with some (hopefully) helpful information.
The following tests were performed all using channel 1 on my router. Note that I do see faster speeds on my Prime on channel 1 with both G and N transmissions. The router is a D-Link DIR-655 with firmware version 1.35NA.
The WiFi version of my Prime is V6.1.1.17.
To get accurate speed results, I transferred a large file locally from my PC to my Prime and my Galaxy Nexus. I let each transfer go for a few minutes and noted the highest speed. Below are my results:
Wireless N Mode Only
Directly Next to Router
Galaxy Nexus: 28.1 Mbps
Transformer Prime: 29.84 Mbps
25 Feet Away From Router, 2 Thin Walls In Between
Galaxy Nexus: 20.48 Mbps
Transformer Prime: 6.68 Mbps
Wireless G Mode Only
Directly Next to Router
Galaxy Nexus: 17.8 Mbps
Transformer Prime: 22.04 Mbps
25 Feet Away From Router, 2 Thin Walls In Between
Galaxy Nexus: 14.4 Mbps
Transformer Prime: 10.32 Mbps
Two important things I noticed from these tests:
1) The Prime actually downloads faster than my Galaxy Nexus when right next to the router, but consistently downloads slower when further from the router.
2) Although the Prime drops off more than my Nexus at a distance of 25 feet from the router, it is at least in the same ballpark when the router is set to G only. However, when the router is set to N only, as you can see from the results, it's not even close.
Again, thank you very much for looking into this for all of us.
I have a b and g router. changed it to g-only and tried changing the channel from 11 to 1 and 3. None of it helped. I use a Netgear WGT624 v3 router with firmware V2.0.10_1.0.1NA
I get a single strength reading between 3 and 4 bars mostly when sitting next to the router but when stepping away it drops to the 1 dot signal strength or none at all. I don't understand what happened in my case because up until yesterday I was getting excellent wi-fi performance no matter where I was in my house. I had my Prime for a week and it was working perfectly. Then yesterday the wi-fi strength just died out. I have requested a refund from Office Depot's website for it but I would love to be able to cancel the refund request and keep the Prime if I felt sure that this issue could get resolved. Office Depot will be picking my tablet up on the 19th. I'll keep an eye on the forums between now and then to see if anything changes or any other ideas pop up for things to try on my end.
Actually did some tests myself today, comparing between the TF101, TF201 and the SGS2... All tests are done with wifi-analyzer and speedtest.
Linksys E2000 router, wifi g-only at channel 1
Close to router (bout 2.5m):
SGS2: ~-45dBm, ~13.5mbps
TF101: ~-40dBm, ~13.5mbps
TF201: ~-45dBm, ~13.5mpbs
Farther away, same room still (bout 8.5m)
SGS2: ~-45dBm, ~13.5mbps
TF101: ~-45dBm, ~13.5mbps
TF201: ~-50dBm, ~13.5mpbs
Kitchen (bout 11, wall and closes in between)
SGS2: ~-70dBm, ~7.5mbps
TF101: ~-65dBm, ~10mbps
TF201: ~-67dBm, ~5mpbs
Other room (about 6m, 2 walls in between)
SGS2: ~-65dBm, ~6mbps
TF101: ~-65dBm, ~10mbps
TF201: ~-70dBm, ~7mpbs
The signal is not that different actually, but speeds can be... THe problem is that within a number of runs in speedtest the changes can be pretty huge. Ranging from 2mbps to 10 mbps... No clue if it's my connection itself (got a 20mbit connection) or the router.
Also have another wifi router so might give that one a try too later...
nyijedi said:
Gary,
Thank you very much for looking into this. I ran some additional tests so I could supply you with some (hopefully) helpful information.
The following tests were performed all using channel 1 on my router. Note that I do see faster speeds on my Prime on channel 1 with both G and N transmissions. The router is a D-Link DIR-655 with firmware version 1.35NA.
The WiFi version of my Prime is V6.1.1.17.
To get accurate speed results, I transferred a large file locally from my PC to my Prime and my Galaxy Nexus. I let each transfer go for a few minutes and noted the highest speed. Below are my results:
Wireless N Mode Only
Directly Next to Router
Galaxy Nexus: 28.1 Mbps
Transformer Prime: 29.84 Mbps
25 Feet Away From Router, 2 Thin Walls In Between
Galaxy Nexus: 20.48 Mbps
Transformer Prime: 6.68 Mbps
Wireless G Mode Only
Directly Next to Router
Galaxy Nexus: 17.8 Mbps
Transformer Prime: 22.04 Mbps
25 Feet Away From Router, 2 Thin Walls In Between
Galaxy Nexus: 14.4 Mbps
Transformer Prime: 10.32 Mbps
Two important things I noticed from these tests:
1) The Prime actually downloads faster than my Galaxy Nexus when right next to the router, but consistently downloads slower when further from the router.
2) Although the Prime drops off more than my Nexus at a distance of 25 feet from the router, it is at least in the same ballpark when the router is set to G only. However, when the router is set to N only, as you can see from the results, it's not even close.
Again, thank you very much for looking into this for all of us.
Click to expand...
Click to collapse
This is almost exactly the behavior i see. In my case it is even a little more extreme, as i actually get occasional wifi crashes (the wifi icon on the prime disappears, then reappears and reconnects after a few seconds) with my router set to GN or N only. Sitting next to the router, speeds on N only are very erratic, ranging from 6-12 Mbps. On G-only, i get a solid 10-12 Mbps.
Overall i find the speeds to be extremely slow. my other devices (G only Droid X included) have no problem handily besting the download speeds at any range.
TF201 | XDA Premium
ToneyEricsson said:
Im finding exactly that rubbish WiFi on the Prime as soon as I walk away from my N-series router.
There definitely is something wrong with the Primes WiFi with mine, could be firmware related.
Sent from my Transformer Prime TF201 using Tapatalk
Click to expand...
Click to collapse
part of the issue is, we don't know which chip the azurewave has for wifi.
Because the OS has drivers for both the 4330 and the 4329 installed in system.
check your etc for driver confs.
I one of the few userr who don't have any problems. wireless n does,'t work will on 2.4 even my laptop has pronlem trying to get n speeds they is why i went to 5 mhz to get full n speeds
I was wondering if any prime owners tryed to connect on a N-Only wifi?? on the box it says a/b,g,n wireless but when i try to set my wifi to N-Only, i can see the network but theirs no way the prime is connecting to it. I have to switch it back to either Mixed or G/N Mixed, and then im able to connect with a max connectivity with router of 54mbps. This problem was present before and after ICS update, my router is a Asus RT-N12 (tryed with stock firmware, updated stock firmware and with DDWRT). I Would like to know if any of you guys tryed this out I feel i'v been kinda scammed
PS. (I checked out on Q&A for the prime and couldnt find any post related to this if you guys know there is already one, please just give me the link i'll continu posting on the other thread thanks)
I can't connect to my "N" router either. Mine doesn't even show up in my TF.
is it a TF prime or the first one?
N-5ghz is not supported, putting it in 2.4Ghz mode should work (at least, it does on mine... whether there's a difference or not is another thing)
I can connect my prime to my router with N only as long as its on 2.4GHZ and between channels 1-11. I wish I could pick up 12-14 because I live in an apartment complex with crowded wifi. Router is Cisco E2000 with DDWRT firmware...
The link speed showing on the network signal app only maxes at 54 mbps though. I can stream 1080p mp4s from my network drive though so its fast enough for me...
RT-N12 is operating on 2.4ghz and does not support 5ghz. Are you sure you are in "N-Only" mode or are you in "Mixed"??
This has been discussed in great detail in general section. Its known Prime can't connect to 5Ghz. set it to 2.5 or G only. G only seems tl yield best results. also check this article out..might help.
www.smallnetbuilder.com/wireless/wireless-basics/30664-5-ways-to-fix-slow-80211n-speed
Yes, it connects 2.5 N only but the performance is pathetic. Prior to ICS, I got curious changing my 2.5 GHz band to strictly G. Saw an immediate boost in performance + speeds.
Yes so far I am very disappointed. I just got the Prime today and it immediately updated to ICS. Once that was done I started checking out the wifi ability right away, because of all the bad reports all over the internet. Much to my surprise, mine doesn't see my wireless N either. I had the TF101 prior and it worked fine with my router. My Samsung E4GT phone sees it just fine, and what really hurts is my wife's iPad 2 sees it, connects to it and pulls just under 20mbps speeds.
To say this sucks is an understatement. I hate losing to Apple in any way, and here I am with the latest and greatest Android tablet, and being punked by a nearly year old IOS device.
Crap
I have no wifi issues with my N router... Performance can be a little better (speed wise) but no issues connecting at all, my router is cisco
Sent from my Transformer Prime TF201 using xda premium
wherestheanykey said:
Yes so far I am very disappointed. I just got the Prime today and it immediately updated to ICS. Once that was done I started checking out the wifi ability right away, because of all the bad reports all over the internet. Much to my surprise, mine doesn't see my wireless N either. I had the TF101 prior and it worked fine with my router. My Samsung E4GT phone sees it just fine, and what really hurts is my wife's iPad 2 sees it, connects to it and pulls just under 20mbps speeds.
To say this sucks is an understatement. I hate losing to Apple in any way, and here I am with the latest and greatest Android tablet, and being punked by a nearly year old IOS device.
Crap
Click to expand...
Click to collapse
What do you stream over 5ghz network to iPad? 1080p movies? It redundant...just turn down to 2.4 and everyone is happy.
Having a technically higher spec which does not improve on daily usage is redundant.
jedi5diah said:
What do you stream over 5ghz network to iPad? 1080p movies? It redundant...just turn down to 2.4 and everyone is happy.
Having a technically higher spec which does not improve on daily usage is redundant.
Click to expand...
Click to collapse
Exactly, the prime doesn't support the 5Ghz frequency. Only supports 2.5ghz N or whatever. There's only a few tablets that do actually support 5ghz. All it takes is a simple change n it'll work. THE whole argument that it should work on any network is b.s. Especially if you have it set to something not supported. Doesn't take a genius to figure that out.
I've always used N-Only. I get a decent connection to my Transformer Prime with it too.
Mines is the cheap Belkin N150 router so I doubt it does that 5Ghz range as that seem like a setting for a higher priced N router.
Scott1620 said:
I can connect my prime to my router with N only as long as its on 2.4GHZ and between channels 1-11. I wish I could pick up 12-14 because I live in an apartment complex with crowded wifi. Router is Cisco E2000 with DDWRT firmware...
The link speed showing on the network signal app only maxes at 54 mbps though. I can stream 1080p mp4s from my network drive though so its fast enough for me...
Click to expand...
Click to collapse
Point 1: Your are in the US, so you are not allowed using anything except 1-11 by FCC regulations.
Point 2: N-Only often turns on channel bonding in soho equipment like yours, so it needs 8 full channels to use it properly. Each channel is 5 MHz apart from the other and a WiFi device uses channels in a/b/g that are 20 MHz wide, in 11n with channel bonding (which is an optional feature for the high data rates) they use channels of 40 MHz. So dividing the 40 Mhz by 5 Mhz makes using of channel 14, 13, 12, 11, 10, 9, 8, 7. If you would live in Japan, on only country that is allowed to use channel 14. So for US it would be channel 11-4. This explains why channel bonding in the 2.4 GHz band is a band ides unless you are living in a big ranch 500 feet away from the next WiFi router.
---------- Post added at 11:28 PM ---------- Previous post was at 11:24 PM ----------
the_game_master said:
I've always used N-Only. I get a decent connection to my Transformer Prime with it too.
Mines is the cheap Belkin N150 router so I doubt it does that 5Ghz range as that seem like a setting for a higher priced N router.
Click to expand...
Click to collapse
Cool device, taken from the specs page of belkin.com:
Security: Wi-Fi Protected Setup, 256-bit WEP (64-128bit), WPA-PSK (TKIP), WPA2- PSK (AES) with WPS Push Button
Range of up to 1,000 ft.
Link Rate: Up to 150Mbps in 40MHz Channel Mode Bandwidth 20 MHz & 20/40 MHz auto
ISP Protocols Supported Dynamic, Static, PPPoE, PPTP, Telstra Bigpond, L2TP
Compliant Standard IEEE 802.11b, 802.11g
So no 11n support per specs, but the Overview page tells 150 MBits are supported, so it can run 75 Mbits without channel bonding and 150 with.
Try out the WiFi Widget it tells you the data rate to the WiFi router.
jedi5diah said:
What do you stream over 5ghz network to iPad? 1080p movies? It redundant...just turn down to 2.4 and everyone is happy.
Having a technically higher spec which does not improve on daily usage is redundant.
Click to expand...
Click to collapse
I spent the extra money to purchase a dual band router, so I could broadcast N and G as two separate signals. As I understand it, if you broadcast both on a single signal, and you have some older devices that require and connect to the G band, it will automatically cut the speed back, to whatever the slowest device connected is capable of. At least that is the way it was explained to me. So the N was on 5ghz and G was on 2.4ghz. It has always worked with any other wireless N device I have had, until I got this "latest and greatest" tablet. So yes now I have downgraded my wireless network to only 1 band, to accommodate the Prime.
wherestheanykey said:
I spent the extra money to purchase a dual band router, so I could broadcast N and G as two separate signals. As I understand it, if you broadcast both on a single signal, and you have some older devices that require and connect to the G band, it will automatically cut the speed back, to whatever the slowest device connected is capable of. At least that is the way it was explained to me. So the N was on 5ghz and G was on 2.4ghz. It has always worked with any other wireless N device I have had, until I got this "latest and greatest" tablet. So yes now I have downgraded my wireless network to only 1 band, to accommodate the Prime.
Click to expand...
Click to collapse
If you have 2.4ghz g network, prime should be able to detect it. Check if your dual band is working properly...
Wireless n is impt only if you stream HD movies. I stream music on g with no problem at all.
I know you feel frustrated, and I know it sucks as prime is supposed to be PRIME. If you intend to stream HD movies to prime you may have to "down grade" to 2.4ghz if not wireless N is kind of overrated or "miss used" as I see no use of having to stream HD to non HD devices. If you are a home theater enthusiastic or business it then wireless n 5mhz is a must.
Hope you can move on to appreciate the quad core of prime than dwelling on this issue.
Cheers!
dagrim1 said:
N-5ghz is not supported, putting it in 2.4Ghz mode should work (at least, it does on mine... whether there's a difference or not is another thing)
Click to expand...
Click to collapse
Dah!!
I just open a new thread for this very issue.... I'm sure I'm going to get ding for it.
any way...
Mine doesn't connect to the "N" wireless
My router hosts "N" and "a/b/g" modes cisco 3200
it only connects to the 2.4 Ghz a/b/g mode...
Desn't work even if I set the "N" mode to 2.4 Ghz channel and turn OFF the a/b/g mode.
PuroKaibil said:
Dah!!
I just open a new thread for this very issue.... I'm sure I'm going to get ding for it.
any way...
Mine doesn't connect to the "N" wireless
My router hosts "N" and "a/b/g" modes cisco 3200
it only connects to the 2.4 Ghz a/b/g mode...
Desn't work even if I set the "N" mode to 2.4 Ghz channel and turn OFF the a/b/g mode.
Click to expand...
Click to collapse
You right about getting ringed..lmao. I just posted to your thread. 5Ghz N range is marketing b.s. its way overhyped n not as good as people think anyways. Read this tech article to get the real scoop on it and tips.
Www.smallnetbuilder.com/wireless/wireless-basics/30664-5-ways-to-fix-slow-80211n-speed
demandarin said:
You right about getting ringed..lmao. I just posted to your thread. 5Ghz N range is marketing b.s. its way overhyped n not as good as people think anyways. Read this tech article to get the real scoop on it and tips.
Www.smallnetbuilder.com/wireless/wireless-basics/30664-5-ways-to-fix-slow-80211n-speed
Click to expand...
Click to collapse
I did read it and thank you at the other thread....
Great Read...
Thanks again.
Hi guys,
I've lurked here ever since I got my Desire HD 18 months ago and this is the first time I haven't been able to find a solution to a problem.
I received my Prime today with no flaws, it worked great out of the box with the wifi at my mums house so obviously I was pretty happy!
Unfortunately as soon as I arrived home a (relatively minor) problem surfaced; my Prime can see most of the networks around my house except my one! It's a Belkin wireless N router set to N/G/B though when I change it to exclusively G I still get nothing.
If anyone has had this problem and found a fix (or is just better with this than I am and can help anyway!) I would really appreciate the help!
Thanks in advance,
N
If you are not broadcasting your SSID, manually enter it using Add Network.
Sent from my Transformer Prime TF201 using Tapatalk
I also have a Belkin router... N600. What model do you have?
The Prime does not support 5 Ghz bands. 802.11n is supported but only on 2.4 Ghz band. FYI I as well as other Prime owners have reported more consistent speeds on strict 802.11g.
Thanks for the help guys, I have in fact found the solution after some tinkering. I changed the routers channel and suddenly it popped up! Not a clue why this worked (as I had already tried this previously) but I'm not complaining!
Hi
I bought a dual band 5ghz router last night and I cant seem to connect my prime to it, it doesn't appear in the list of wireless networks so my question is does the prime support dual band? my galaxy nexus had no problems doing so
Cheers
Prime can't connect to 5ghz band. Need to be on 2.4.
Is it hardware or software? Can any roms do so. This really sucks that it cannot
Sent from my Galaxy Nexus using XDA
Drift spunk said:
Is it hardware or software? Can any roms do so. This really sucks that it cannot
Sent from my Galaxy Nexus using XDA
Click to expand...
Click to collapse
Of all the reading i've done on the subject the hardware is apparently definitely 2.4 only, even if the software may have an area which looks like you can enable it the hardware cannot do it.
Yea its hardware related. The wireless chip can't receive 5ghz radio signals. As far as I know that's pretty common for all phones and tablets.
there are only a couple tablets that can do 5ghz. most do not and use the standard, as standard range is alot more than 5ghz range.
Does your router not support 2.4ghz and 5ghz simultaneously? If not why not stay on 2.4ghz?
Why do you need to be pushing 5ghz though your walls?
My name is Optimus Prime and I send this message..
If i could i would be running ONLY 5ghz, faster, less range means less crowdedness on the different bands, whats not to like?
problem with 5ghz on prime is the prime already has a shoddy wifi as it is, 5ghz would jsut cripple it. And from what i read the chip supports 5ghz but there is no antenna for it or something i forget exactly.
Basically, no 5ghz on the prime but i think thats by design. Wish it had it tho, would love to see a GPS dongle repurposed for wifi. Wishfull thinking tho methinks.