Looking for input on the best way to set up file folders to be utilized on both WebOS and Android partitions. I tend to go into probably Way too much detail, skip to the bottom for the tl:dr.
I first noticed that the TouchPad doesn't handle folders very well when I tried organizing many files for school. I had each class in a different folder hierarchy based on course. But when I go to access them, they show up as a huge long list of .pdfs instead of my nice organized fashion. Similar thing happened with my music. I shrugged my shoulders cause my file naming convention was good enough that I had no issues.
Then I installed CM7 Alpha 3.0 (recently flashed 3.5, same situation). Got the Android partition all setup the way I wanted, and further organized my folder structure to match. Rocked Android for a few weeks, and got nostalgic, so I booted back to WebOS. I immediately noticed that my TouchPad claimed I had no music, while not a lot, there's around 5gigs floating on it. Told myself I would look into it, spaced it off. That was until I noticed I couldn't access any recently downloaded and organized .pdfs that were done on the Android boot. What gives?
I've always found it frustrating that the native file selection system in WebOS doesn't give you file path options, but it is what it is. I know there is a file system browser on Preware, honestly I think it's cumbersome, but may have to rely on that I suppose. I have major OCD as far as how folders are organized, and really don't want to just dump everything on the root. But again, if I have to, I shall.
TL: DR Ultimately I'm trying to get info on how the WebOS partition sees files, and how the folder heirarchy works. I have files in some folders that are recognized, and some that are not. Is it naming convention, or just location? My file issues are primarily .pdfs and music files, but concerned with any productivity file extensions for the sake of school (primary use of device.)
16Gb TouchPad WebOS 3.0.4, F4 Phantom kernel, great number of patches, Dual boot CM7 3.50
Did you (or anyone else) ever find any information on this issue? I find it frustrating having to go through Internalz Pro and go through each folder to do anything. My music will not show up through the stock player (which would be great on webOS because the android sound goes bad when the screen is off).
I have not. Haven't played with my TouchPad much recently, mainly cause every ROM I flash wifi breaks.. lol.
If I ever do get a solid solution, I will try to post up.
im betting this a indexer issue if want try to force it to index, look for "Media Indexer Refresh" in preware, that should find any stray media supported by webos
Yeah, it's definitely an indexer issue. A lot of people used to say to connect it via USB and then do a hard unmount (where it says "ouch...") and let the indexer run but that doesn't work.
Thank you for that suggestion though, it is exactly what I needed. I always thought there should be some command or some patch that would force it to re-index but never found it. I ran it one time and my pics and music show up. Awesome!!
Related
I've had my gTab for about a month now. It's running Vegan and has CWM. It deleted a whole slew of pictures a few weeks ago (they were some comics I was wanting to read) from the microSD card I put in it and figured maybe it was a random occurrence, so I put the pictures back on it. Same thing happened. Last week I was in class and needed to record my professor's lecture, so I busted out my gTab and recorded away. After the lecture I made sure I could find the file on my gTab so I could share it with a few friends. Today I go to take the lecture from my gTab and it's gone.
Has anyone else had this happen? Does anyone know what's going on? Am I doing something wrong? Is this a problem with Vegan? Is there a fix?
Thanks in advance! I appreciate any and all help.
Don't know if this makes any difference, but before I installed Vegan and CWM, I got stuck in a boot loop using stock TNT. Installing CWM fixed it.
I can't help but this happened to me too. Also on the
external microsd card.
But I'm running tnt lite 4.4 ....
Don't trust any data to android I think is the lesson.
Known issue. The fix involves putting an empty file called .nomedia on the root of the microsd (aka "sd2") card. Search forum for ".nomedia"
The gtab likes to delete media from the sdcard2 when it scans for media. It is a known issue that everyone has but there is no good fix yet. Put an empty file named .nomedia on the root of sdcard2. It will stop the media scan and stop the media from being deleted.
Put an empty file named .nomedia on the root of sdcard2.
Click to expand...
Click to collapse
But then - correct me if I'm wrong - music players won't see the music
files on sdcard2 and you can't play your songs.
Nice Q&A google!
( just 'cause it'a "known issue" doesn't make it OK)
Albright, some media players do see the files, some don't it seems. The native player does NOT. In any case, you can navigate to the file using a file/root explorer and open them that way if necessary.
Correct about the native player - it won't see your music anymore. That's the caveat.
This has been a problem since Day One. It used to not scan /sdcard2 at all, then VS fixed that but then things started getting deleted (which is worse, imo).
I use "andless" or Rockbox for music, to get around this issue. I actually prefer a directory-based structure versus a database-based one.
andless looks good - also looks like it doesn't demand
too much from the battery. Aagreed that folder based players
are to be preferred.
thanks for that
Question: I'm not being allowed to create new folders in Miui, anyone might know why? Or is anyone have the same issue? I'm able to create an initial folder and I have placed several apps in there. But when I go to create a new folder, it creates (essentially) a duplicate folder which then I cannot delete as it has the same apps that was included in the previous folder.
Do I just have to create several empty folders right off the bat? Doesn't seem like this should be necessary.
Edit: Ok, cannot create multiple different (content-wise) whatsoever. Using 1.7.15, btw.
I was having the same problem on my Nexus S. So I tried the same thing you did: I setup 4 different folders and copied an app to the first, another to the second, etc. All the apps showed in each folder... I then moved them back out, re-added separate apps in each folder and it seemed to work at that point. I closed and opened the folders a few times and even added a new folder, put in another separate app in that folder and so far, no duplication. Trying to organize now and hopefully it doesn't screw everything up when I'm all done. Seems like it's just a glitch.
UPDATE: about 5 folders in, it started happening again, so I moved the apps out and restarted and then moved them back in and no duplication. This is driving me nuts, if I weren't an OCD case.
Glad I'm not the only one suffering from this. Very weird glitch, though. Went back to CM7 already as it's a major dealbreaker for me.
this Is a new problem because it worked in the previous build.
Known Problem
I was reading up on this on the MIUI forums yesterday. It is a known issue that did indeed crop up on the 7.15 build (My birthday killed it!).
Workaround: Create a folder, reboot. The folder will be empty. Yes, I know this is annoying. Sorry. That's what's available. Thankfully I only need about 4 folders, so I only did 4 reboots. lol.
Anyways, they are working on it. That's the happy answer. Somebody linked to a site with crazy text where they are talking about the glitch, but I think it was in Chinese, and I didn't feel like going through a Google Translate.
I have a few ebooks on my laptop and I am having issues moving them to my nook tablet. It has been rooted and I am using ADW launcher. Please help!
rbellis said:
I have a few ebooks on my laptop and I am having issues moving them to my nook tablet. It has been rooted and I am using ADW launcher. Please help!
Click to expand...
Click to collapse
What format are your books? How are you trying to move them? via usb? dropbox?
Do you have an SD card installed? Without one, only 1GB is seen on your internal memory if you connect your noob to your pc with the usb cord (but then you can move it to anywhere else).
Install a file explorer program (file expert is a good free one, root explorer is too but it has the possibility of having you misclick and mess up permissions on system folders).
Books/anything else moved to your NT's internal memory via usb -> shows up in /media. Books that you want your nook's native book applications to see -> move them to /data/books. Books that you have on your sdcard -> will not be seen by your nook's ebook reader program but you can make any folder anywhere and put books in it.
I recommend using an sdcard and downloading a program called Coolreader (android market); it's the best ebook reader I've found on this platform. It has a ton of settings and lets you configure it entirely (font, spacing, layout, behavior, etc etc). It reads from .zip archives and supports quite a few formats. It won't see anything with DRM protection on it that hasn't been removed, nor will it see .lit or amazon's proprietary formats. Anything with DRM on it that you bought from a certain market (Kindle, Adobe DRM ebook stores, etc) will only be read in associated programs (until you remove the drm) :/ Calibre is a great program (on the pc-side) to convert between book formats and manage your library, as a side note (not related to drm removal).
if I kept them on on my SD card how would I get them to show up using the stock ebook reader? Also....what format can I use? I have them in .mobi and .opf
Since I am rooted I can access the other 15GB ... I tried using es filer explorer (enabling root) and trying to move them to the books folder but I still cant get them to show up using the google books...kindle app and the stock app on the tablet
rbellis said:
if I kept them on on my SD card how would I get them to show up using the stock ebook reader? Also....what format can I use? I have them in .mobi and .opf
.Since I am rooted I can access the other 15GB ... I tried using es filer explorer (enabling root) and trying to move them to the books folder but I still cant get them to show up using the google books...kindle app and the stock app on the tablet
Click to expand...
Click to collapse
For books on your SD card go to your Library application -> my files -> press memory card, and your books should be there (at least the ones in a format it sees/reads).
Stuff in /data/books will show up automatically on your shelves, I think. Stuff in /media books will need to be imported the same way as above: library -> my files -> books (just not clicking on memory card button).
The Nook's eReader will see: EPUB, PDF, DOC, TXT, DOCM, DOCX. Epub is a great thing to convert all your books to as it's widely supported and is the public domain standard (by the way). Other reader apps will see more formats. I think .opf is epub though no? Or rather it's .epub with extra metadata, so that should be seen right off the bat. If not, do try Calibre out. One click conversions to any formats, and previews of how it looks on that format.
I am so sorry to keep asking about this...I have tried putting them in the data/books but nothing showed up in my library. I don't know what I am doing wrong. Sorry if I keep asking stupid questions...just really want this to show up on my "shelf"
Try this:
Open library -> my stuff (upper right) -> find book (sd card) -> select book/long press book -> select add to shelf from pop out menu. It will ask you to make a shelf; you can edit and add shelves via the menu that pops up (create new shelf/add to favorites).
Does that work?
Putting them in /data/books adds it to the reader+reader's directory. I could have sworn there was a way to mass-autoadd things to the shelves (checking now).
edit: Ok, I can't get it to work except through actually adding it with the Library app Rebooting the device puts the books from my files -> add to shelves in the "book" tab however, but they do not automatically appear there if you close/restart the library app without rebooting the nook. Odd behavior. If you have a lot of books the library seemed very finger intensive.
I can't figure out how to mass-move anything inside the Library app either, and I'm not sure whether it has this capability either. Yeah, I quickly moved away to using a file explorer app + another reader, as you can see
Hi ...
Nook is unable to see/read .mobi and .opf. You must convert them to epub, using a free program called Calibre.
Or they are locked by the use of a DRM... again Calibre can help you.
Try to find an ebook is an "epub," reread slowly, Zmobie's excellent posts, then try again...
ok....so I can get them to show in "my shelf" if and only if keep it on my SD card. My goal is to keep my books on my nt and music movies and pics on my SD card because it is only an 8GB.
I have a John Grisham collection that I have in a folder labled "john grisham" Should I not put it in a folder and just put it in the data/books folder
Ok, there are a bunch of book directories on the internal memory: media/My Files/Books seems to be the only one that automatically shows up in the Library books section but ONLY if you reboot. Copy/move the books you want on the internal memory there, to have them show up in Library.
If you (or when I did anyway) add a book through the Library application it will add it to the shelves, if you pull it from an sd card, or the 1gb media/My Files/Books storage folder. I went and pasted a bunch of books to test this and the Library app only sees things that is labeled as user storage (which I guess makes sense).
The way to mass-add books to the Library, without one by one dragging and adding through the Library app itself, is to move the files you want to automatically load up in Library (under the "books tab" - won't be added to a shelf automatically) is to copy all of them into media/My Files/Books, and restart the nook. The restart is needed as there doesn't seem to be a way to force it to scan for new books without a restart :/.
So:
It should *definitely* see all your books if you move them to media/my files/books, under the "books" tab, NOT under "my stuff" tab, if you copy and reboot the nook. You can then add them to shelves from the main "books" tab (which is what Library starts up in).
I don't know whether it scans inside folders - it *should* so you should try moving your John Grisham folder to media/My Files/books and see.
(I wonder what the three other /books locations are for :/. I don't seem to force Library to automatically recognize stuff in them. The reader does recognize anything in those directories, but then it's just a folder listing anyway).
edit: Ok it works inside folders for me. Have fun!
Thank you so much! Now if can figure out how to make folders on my desktop I will be good to go.....thank you so much
Calibre also works great for the Mac
rbellis said:
Thank you so much! Now if can figure out how to make folders on my desktop I will be good to go.....thank you so much
Click to expand...
Click to collapse
On the Nook default launcher you can't, I think*? It's a reason I use another launcher (go/adw) and just create links to the Nook applications I use. You can make folders by default in either of the two above launchers.
*If anyone has managed this, do tell.
not to get off topic but when I try to add a folder...long press on the screen and select folder and nothing happens
rbellis said:
not to get off topic but when I try to add a folder...long press on the screen and select folder and nothing happens
Click to expand...
Click to collapse
In Go launcher? HMMM. *tries*
edit: Oh, that's funny. You're right! I never actually make folders that way, because I have a few folders I got from accidentally dragging an icon onto another icons. They get grouped into a folder automatically I assumed the normal way worked, but if not, try that.
It doesn't work in any of the launchers. It must be disabled on the nook entirely in that case. Weird!
I wasn't able to drop appear together with ads to make a folder so I switched to go launcher and I like it so much better. It it what I use on my roped droid x2. I don't know if it was my hacked downloaded version of adw that caused this but for some reason I could not put anything on the top 1 inch or so of the screen. But I have had no issues with GO.
Sorry to keep asking newborn queriins. This is my first tablet. I have noticed that even though it is rooted and has an android os on it, there are still a lot of things that canny be done. I have not been able to download a facebook apk I have also had issues with the xda app. When I log in the app force closes. Not a big deal...I have then been going to the website. With that in mind....is there a way to put web page short cuts on the droidtop......
Again...sorry for the newborn questions and thank you again for your help
rbellis said:
I have noticed that even though it is rooted and has an android os on it, there are still a lot of things that canny be done.
Click to expand...
Click to collapse
Yep, there are a lot of things disabled on the NT and won't work until apps get updated or mods are released for the tablet. It's a new (and restricted) device, so this is normal really; various things won't work off the bat. I think there is a Facebook app thread in these forums (or the dev forum) that gets that app to work somehow. I don't use it so I don't know specifics.
I heard that ADW launchers recent update changed/broke some things, so that might be why it isn't working perfectly. I use go launcher myself and ADW only for emergencies currently, yeah. Anyway, no worries on asking newbie questions - means the device is getting more users and exposure! Have fun with it.
So after a month of owning the View, I decided to try Honeycomb. I used globatron's process, as I am S-Off (HBOOT 6.12.1002, if memory serves, if that makes any difference). (http://forum.xda-developers.com/showthread.php?t=1409306)
The process completed flawlessly, but the tablet was SO SLOW. I know it's not the end-all of performance metrics, but with Gingerbread, Linpack scores were in the mid 50's; with Honeycomb, they topped out in the low 20's (my EVO 4G does high 30's and is underclocked to 921MHz). Apps and menus would take more than a second to load. Some apps didn't even work - YouTube would force close if I tried watching a video (and when I searched for YouTube in the market, in hopes of an update, it didn't even show up!); the gallery didn't recognize a single picture that I had stored on the device, except for the ones in the camera's own folder. It also drained a LOT of battery in a short amount of time.
I searched for Honeycomb issues, but I found nothing reporting these kinds of problems. I've since gone back to Gingerbread so that it's useable (and thanks to the Nandroid, it's like I never tried HC), but what the hell was wrong with my Honeycomb install?
Furthermore, my girlfriend's View was laggy when she did the OTA to Honeycomb, and she had me downgrade her back to Gingerbread only a couple days later. The rave reviews of HC on the View just have me wondering "why not me?!" Any insight is greatly appreciated. Thanks!
did you clean install?
Can you clarify what you mean by "clean install"? I've not heard that terminology before...
I meant wipe/hard factory reset and wipe cache, that's what I usually do before flashing. I suggest try to flash other HC Rom like leedroid and see if you will get improvements.
I wiped data and cache before starting the process. Perhaps I'll try again with a different ROM, but I figured the stock ROM should've worked smoothly.
Yes very
Sent from my Htc Evo powered by: MikG 3.o
Try this rom. Solved all my speed issues with HC. You'll love it.
http://forum.xda-developers.com/showthread.php?t=1416868
Makes View just like typical HC tablet. Browser is MUCH better.
Sent from my PG41200 using Tapatalk
^ I'll give it a shot tonight, thanks!
To be honest, I couldn't quite figure out what the benefit of Sense on HC was... I've used my friend's Xoom briefly, and saw no functional differences. I suppose probably widgets, given that that's where most of the benefits of Sense are.
I'll post results once I'm able to evaluate.
Thanks again!
Flashed it last night. Had to flash it twice because the first time it absolutely would not maintain a wifi connection (not even long enough for me to get an IP address and switch to static IP).
Seemed smooth (low-30's MFLOPS), but the G-sensor (or accelerometer) was a bit jittery - games like SpeedX 3D were all over the place, and the holographic images in the gallery were shaking. Had me worried I was developing Parkinson's.
Of more pressing importance, I couldn't access any multimedia stored in a folder other than DCIM from the Gallery app, and couldn't even open images through a file explorer. Flashed back to stock Gingerbread so it's usable while I investigate.
Frustrating that I just can't get Honeycomb to work properly on this damn thing. lol
Mathman85 said:
Of more pressing importance, I couldn't access any multimedia stored in a folder other than DCIM from the Gallery app, and couldn't even open images through a file explorer. Flashed back to stock Gingerbread so it's usable while I investigate.
Frustrating that I just can't get Honeycomb to work properly on this damn thing. lol
Click to expand...
Click to collapse
There's a fix for getting the system to rescan your memory cards; I'll look in a bit and see if I can't post it here. As for HC working properly, I love it. The de-Sensed HC was a thing of beauty. If I can lay my hands on a De-Sensed version of LeeDroid's work I'd be in heaven. The standard HC interface was clearly created in response to Sense's user-friendliness, and they came up with a superior product.
I looked around, but never saw a definitive answer... most of what I saw was "clear cache!" or "clear data!" but those didn't work for me. When my girlfriend's had the problem (while on Gingerbread), opening the image in ES File Explorer and choosing Gallery as the default app for those file types usually corrected it.
And I do like Honeycomb, and love the ability to resize widgets, I just need it stable and fully functional before I'm comfortable sticking with it. My work phone is a Galaxy Nexus, and I LOVE ICS, but Honeycomb is damn close in style and functionality.
I can't find the posting I saw, but it essentially was to create a directory of a certain name on the card, and that forced the Flyer to re-scan the entire card, graphics and all. Evidently something akin to a thumbnail cache can get corrupted and that causes this issue, and creating that directory forces that file to be recreated entirely. I'm still kinda new to Android, so I don't know where the nomenclature diverges from Intel-based storage management...
Thanks for taking the time to look around. I found this, but it says it's for the Music folder... perhaps I should try the same in the Pictures folder.
That directory name looks very familiar, but you're right, it's for music, not graphics. It might work for you, what's the worst that can happen?
The other thing that occurred to me is to swap the micro-SD card with another one. Placing a new card in forces "stuff" to kick in, and I'd imagine the process needs to repeat once to replace the old card back in the slow. Or at least a portion of the process to see if it "knows" that old card when you put it back in.
The content is stored in the internal memory - not on an external SD card (I only use the external card for Nandroid backups and things of the like). That's what's so baffling to me - it's the View's own non-removable memory that isn't being scanned for pictures and videos.
Not only wipe data and cache, but also format system, wipe dalvik in recovery when doing a fresh rom install for best results.
Sent from my LG G2x using XDA on Bionix
Hello All,
I wondered if one of you experts may be able to help me with an issue I'm having with my SIII please? I'm a long time browser of the site but haven't posted much until now.
This issue is coming between me and my sleep (and I mean that literally.)
I can't seem to master the art of getting music onto my S3. I thought it would be as simple as using iSyncr as I had with my S2. Alas, no.
Because of the changes to the mass storage mode (I am running a Mac), I have to download the Android File Transfer thing to connect my phone at all to my Mac.
When I use iSyncr now, it's slightly buggy. I put the phone into MTP mode, it starts copying music across and then after a certain number of tracks, it throws up an MTP issue where it says certain songs can't be copied. I then have to go around the houses and start clearing data from the media storage app in my settings and rebooting the phone. Then, I try again and get so far and the same thing happens again with different songs.
Also, when some songs transfer the albums appear split in the phone (though this is minor annoyance compared to the above).
I have left it on overnight and come back to my computer and it all looks finished, yet of my 6700 songs, only 3400 have transferred.
I've tried going the old fashioned way and spend last night dragging and dropping files onto the memory card using the Android File Transfer mode. I got one message saying a song couldn't be copied, yet when I actually got up and checked, again, only 3400 odd songs had transfered. There were no error messages and we're not talking DRM songs that hadn't gone across.. but some that I had ripped myself. It's all very odd.
Don't mention DoubleTwist - that's even worse.
This is really driving me mad as I am a big music player and I don't want to fork out for and have to carry an iPod too. I just sold my iPhone to use the S3 as I assumed it would be simple like the S2 but this is making me so upset with the phone. It's as though Google have deliberately locked out Mac functionality.
It's an unlocked unit, with a sandisk 64GB card inside. That was formatted by the phone and when I tried using a card reader instead, the computer said it couldn't be recognised.
I'm throwing myself at your knowledgeable feet here and hoping that somebody knows exactly what is happening here and what it is I could do to fix it. My entire weekend has been wasted sitting in front of this computer and I really want to fix it.
Please help.
Thanks in advance.
Can't help with your immediate issue I'm afraid (waiting for my S3 and I don't have a mac... ) but have you contracted the devs of iSyncr to let them know of the issue - at least that way they can start working on an update.
Sent from my CM9 TouchPad
I sure have!
Thanks for contacting me and pointing me to this thread.
First off, I've pre-ordered the international S3 so that I can test this out. We just do not have them in Texas yet.
Secondly, I've been unimpressed with Android's MTP's robustness on other devices. I filed several bug reports for different scenarios that corrupt the MTP database in March of 2011. Zero have been touched by Google. Given this, the first thing we should try is rebuilding the MTP database, which lives inside the "Media Storage" app. I've put these instructions in an easy to follow tutorial.
http://blog.jrtstudio.com/2011/08/how-to-refresh-android-media-database.html
Please let us know if that helps the issue.
Cheers!
Justin
Don't suppose anyvody has any solution for this? Really don't want to take my S3 back but will have to at this rate. I think it's shocking that the S3 is so crippled from a Mac's perspective since the changes to MTP. Android File Transfer app doesn't really fix anything.
I have the same problem. Even using AFT, it wil not see the phone until I put it into PTP mode. THen I can copy data to it. isyncr see the phone in MTP mode but keeps telling me device failed to load.
I'm going to mention
I know I shouldn't mention it but here you go Double twist!
Right I've had some problems and this is what actually worked.
First you have to use itunes. If your music is a mess then a app on the app store called 'dupin' will remove any duplicate songs you have (it worked well for me). if you have lots of dead file links in your library just remove all your library files and then click 'add to library' be careful that itunes does not copy the files you add to the itunes music folder - see preferences.
1. Make a 'new playlist' --> add all your songs to it (press command+a etc). If you have a large music library like me then you can make a 'smart playlist' and limit the size of the playlist, handy eh!!
2. Open doubletwist on your mac and immediately make sure in 'preferences' the 'automatic sync' option is switched off (I had an incident where my whole library syned with 2 of my external hardisks...oops...and the funny thing is that one of the hard disks was where the music stored). Make sure the 'import itunes playlists' option is also selected.
3. In the doubletwist andriod app Select the SD card as library storage and Enable the 'Airsync' function in doubletwist (you will have to pay for the app but in my opinion it's worth it - it also supports ACC files).
4. Enter the pair code into the mac application.
5. Select the option to sync your playlists only (don't try anything fancy!!). You should see the one you made in itunes here.
6. THIS IS THE IMPORTANT BIT: you should by now see the 'airsync' icon at the top of the screen. PULL DOWN THE NOTIFICATION CENTER AND TOUCH THE 'DOUBLETWIST IS SYNCING'. You will see a funky swirly multicoloured wheel LEAVE THE PHONE ALONE UNTILL ALL YOUR MUSIC HAS SYNCED ACCROSS.
Dont lock your phone as this seems to mess it up...
Hope this helps. I understand your pain, I lost a weekend too!
Notes: Podcasts and DRM stuff does not sync.
Notes: If your playlist is not the full size of your music library then if the 'live updating' option is turned on in your smart playlist then when you click sync in doubletwist it will sync different songs each day (I think...)
If none of the above works, you always have a nice shiny 50gb of free dropbox storage as an interim solution
pow001 said:
I know I shouldn't mention it but here you go Double twist!
Click to expand...
Click to collapse
If you are already an iSyncr user, as this person is, there is no reason to leave me for doubleTwist. We've got iSyncr WiFi, which we came out with before doubleTwist and is only a .99 cent upgrade. If you've got an issue with it, just email me, and we'll make sure it works on your S3.
-Justin
If its possible, try installing VMware fusion, and you can run windows inside your MAC in a virtual machine, you can try this if everything else fails...
You know where to download these softwares
You can try for free...and find the serial key easily using Google.
http://www.vmware.com/products/fusion/overview.html
I purchased the isycr wifi option and it is working fine... I think they have a "lite" version that you can try, but it only syncs one playlist or something, but you can see if it works or not. But that is what I am using now.
Ken
Resolved
We have resolved any issues with iSyncr functioning on the Galaxy S3 in MTP mode. Please contact us at [email protected] if you have any troubles.
Cheers!
EasySeaBreezy said:
We have resolved any issues with iSyncr functioning on the Galaxy S3 in MTP mode. Please contact us at [email protected] if you have any troubles.
Cheers!
Click to expand...
Click to collapse
How about with the motorola defy ? Still waiting on that if you can have a look at fixing that one.