I'm new to Android, my first step was to research hardware and functionality. The choice, you guest it, gtab!
Now of to the good stuff. I ultimately want to root and update my Rom to vegan5.1. So far I have downloaded cwv08, upload downgrade and vegan. The problem is that when I try to restart using power + volume +, I do see the open box screen but then it just loads tnt and resumes boot. There has to be a step I must be missing here. Like I said I'm new to grab and android. Where do I start?
To my understanding, power with volume + without cwm install will run the command file in recovery folder. Preharps u are missing the file, preharps u are not naming the file correctly; too little details provided to tell..
try reading : http://forum.xda-developers.com/showthread.php?t=865245
same box with green arrow
I too have installed clockwork. Downgrade the bootloader then try to reboot into clockwork using the + and power. The tab acts like it is going to enter recovery says "Detect recover key press
Booting to recovery image"
Then it goes to that screen with he box with a green down arrow coming out of it and a progress bar. When it finishes it reboots. Still at stock rom, no joy at all.
A couple things I have tried. Copying a new update.zip to the root of the internal memory and the sd card, reboot with and without the sdcard inserted, rebooting normal then trying to get reboot recovery with + and power, copying the cwm update and recovery folder into root. No joy each time it it is the update box. I have not tried holding the recovery keys down in the dark while chanting xda but I think I missed my chance for that working last Friday.... when is the next Friday the 13th?
Thanks for any help or insight anyone can give us.
Bednab,I could not have explained any better. This is exactly what happens with mine. Today I encountered another challenge. My gtab will not connect to my-fy on open iphone. I have to figure this out before my road trip next month.
and there was much rejoicing
I kept at this and finally found a solution. A post pointed me to the answer on androidforums about the command file getting deleted out of the recovery folder after a successful update. I opened the recovery folter on the g tab and it was empty so I opened the one from cwm and edited it to this:
--update_package=SDCARD2:/update.zip
This way it points to my external card where I had a few custom roms. Copied it to the recovery folder in the root of the gtab, reboot into recovery mode and much joy!
Background info:
The G Tablet came with 1-1-3389 and I performed the OTA update to 1.1-3588 which went fine. I then rooted it with z4root and that went fine too.
1. I then side loaded ROM Manager and was able to install CWM Recovery and then was able to do a backup of my base ROM.
2. I then copied update-cm-7.0.3-Harmony-signed.zip and gapps-gb-20110307-signed.zip to the internal storage on my G Tablet.
3. In ROM Manager I chose to install ROM and I selected the gapps-gb-20110307-signed.zip and the tablet rebooted and came up in CWM Recovery. I watched it install 7.0.3 and then it rebooted on its own.
4. The tablet now will only come up to the Viewsonic screen with the birds on it and it just sits there.
5. I press the power button and hold it down to power off the tablet. I then press the + side on the volume rocker and press the power button. I get the "Recovery Key Detected" and then get a screen with a box on it with an arrow pointing down and a task bar underneath then it reboots and comes back up to the bird screen and just sits there.
I have read many threads about this but I am not sure just what my problem is exactly. The fact that I am unable to boot into recovery seems to be the biggest issue.
I have downloaded update-smb_a1002-3588-user.zip and update-smb_a1002-3389-user.zip and have went so far as to unzip the 3588 zip and copied its contents to my microSD card and inserted it and have booted it up while holding the + rocker down again...in another post on the subject I thought I should get "Recovery Image detected" due to the fact the microsd has the following on it...
data folder
META-INF folder
boot.img
bootloader.bin
recovery.img
system.img
Or did i totally misunderstand what I read?
Any ideas?
Maybe others can give a more specific answer, but:
If you're willing to completely reset your tablet, you can use nvFlash to get it back to factory condition.
Just Google:
nvFlash "g tablet" roebeet
And follows the steps that roebeet outlines to get your tablet up and running again. It looks rather complicated, because the instructions could be formatted more clearly, but in reality it's a pretty simple process.
Note that doing this WILL erase ANYTHING you have on there.
thanks for the reply....I do not mind losing anything to get it going again
I am back rocking again...thanks!
This may well have been covered elsewhere, but I tried a quick search and couldn't find it, so figured I'd post anyway. Reseting the Nook Tablet by holding N while you power on forces it in to a reset mode. But, if you actually want to get back to a proper factory fresh unrooted state you easily can take advantage of the "X failed boots" which forces the Factory Restore mode. Start by powering down the Nook, then, this is how I did it:
1) Hold both volume buttons down
2) Press power
After a second or so the intial black screen with copyright info comes on. Keep holding all the buttons until the black copyright info goes off and it looks like it's powered down again.
Repeat at least 8 times.
If anybody knows an easier way please chime in.
the second one is the first time i saw
Quicker factory restore.
If you have root shell access:
At the device shell command line: echo -n '0000' >/bootdata/BootCnt
Unregister device (which will reboot and then do a full factory restore).
Actually, any 4-byte string value of ASCII characters will work, as the resultant value only has to be above a BINARY 8.
DeanGibson said:
If you have root shell access:
Click to expand...
Click to collapse
Hi Dean. Is there a good app for providing shell access?
Fast Nook Tablet Restore
The fastest and easiest way to do a factory restore is under Settings, Device Info, Erase and Deregister Device. This will remove ALL files one has added and you will able to reregister your tablet.
Correction: Oops! Sorry, this is not correct. See following post.
bsavoy, We are talking about resetting the /system folder to factory (removing gApps, restoring bloatware, removing root, etc) All of those are in the system folder but don't go away when you do erase and deregister. That only wipes /data/
t-r-i-c-k said:
This may well have been covered elsewhere, but I tried a quick search and couldn't find it, so figured I'd post anyway. Reseting the Nook Tablet by holding N while you power on forces it in to a reset mode. But, if you actually want to get back to a proper factory fresh unrooted state you easily can take advantage of the "X failed boots" which forces the Factory Restore mode. Start by powering down the Nook, then, this is how I did it:
1) Hold both volume buttons down
2) Press power
After a second or so the intial black screen with copyright info comes on. Keep holding all the buttons until the black copyright info goes off and it looks like it's powered down again.
Repeat at least 8 times.
If anybody knows an easier way please chime in.
Click to expand...
Click to collapse
I followed these instructions which differ slightly. Unfortunately not any easier.
http://forum.xda-developers.com/showpost.php?p=19546639&postcount=13
ConnectBot
tonyp22 said:
Hi Dean. Is there a good app for providing shell access?
Click to expand...
Click to collapse
I use ConnectBot from Google developers, in the Android Market.
Thanks man...sending mine back tomorrow and needed this.
Sent from my SPH-D710 using XDA App
This work for me,
Turn off your NT.
Hold power button + volume up button + n button until your NT turn on and then off. It takes like a couple seconds.
Repeat 7 more times.
When you turn your NT on the 9th time (without holding other button), your NT will restored with factory software and removing root.
succulent said:
This work for me,
Turn off your NT.
Hold power button + volume up button + n button until your NT turn on and then off. It takes like a couple seconds.
Repeat 7 more times.
When you turn your NT on the 9th time (without holding other button), your NT will restored with factory software and removing root.
Click to expand...
Click to collapse
I turned off the nook, and turned it back one while holding down the 'N' button and power at the same time. Only have to do it once.
HMG10 said:
I turned off the nook, and turned it back one while holding down the 'N' button and power at the same time. Only have to do it once.
Click to expand...
Click to collapse
That method only clear the /data folder. You still have root.
The hard reset method clear both /data and /system folders, removing root. This method is for when you messed up your NT badly.
Bump because so many people still don't know how to do full factory restore.
When full factory restore is done properly, your NT will restore automatically. No pressing n button or asking you steps. Not to be confused with factory reset. Factory reset will prompt you to follow steps on screen.
Instruction from BN tech support
This is what I got when I chatted with a BN tech support. Copy-pasted verbatim.
Please follow the steps below to hard reset your NOOK Tablet. Please note that a hard reset de-registers your device as well as erases all local content such as contacts, sideloaded documents, personal information, 4 digit passcodes, etc. It is recommended that you backup any sideloaded material before continuing.
1. Hold the power button down for 10 seconds until the NOOK Tablet is powered off, ignoring the "Power off" prompt.
2. After Your NOOK Tablet is powered off, kindly press the home key and the power button until the "Read Forever" logo disappears. Once disappeared release the buttons immediately.
3. If successful, a grey NOOK Logo will appear and the screen will refresh momentarily and flash yellow. A prompt will appear asking if you would like to perform a “Factory Reset,” Tap the "NOOK Home key" to confirm. Tap the"Home key" again to begin the process.
4. After a few minutes your device will reset and re-install all necessary software. Once completed, you will have to register the device again.
Your eBooks, magazines, newspapers and applications are saved on your online library. You can download them again after registering the device. By the way, you need to have a Wi-Fi connection to register it again.
Click to expand...
Click to collapse
This method worked for me:
Turn off your NT.
Hold power button + volume up button + n button until your NT turn on and then off. It takes like a couple seconds.
Repeat 7 more times.
When you turn your NT on the 9th time (without holding other button), your NT will restored with factory software and removing root.
magic SD card doesn't work
I've tried the acclaim_update with 4GB, 8GB and 32FGB Sandisk microSD cards after unmounting and erasing them on the nook. Nothing happens. I've done factory restores with the Volume+Power button technique and the nook does reset but the system remains at 1.4.1. I've done it a bunch of times to no avail and now my nook is unrooted but I can't reroot it and block the upgrades from B&N. Anyone else having the same problem. And is there a fix for me?
---------- Post added at 04:34 PM ---------- Previous post was at 04:21 PM ----------
Also tried the reset method above - power key for 10 sec, the power plus home buttons. Again a factory reset but when I've gone through the setup process, I still have 1.4.1.
I have the same problem as lessilb. I do a factory restore and I'm still at 1.4.1. I try the Acclaim method on a 16GB SANDISK microSD and it ignores the microSD. I had root before Christmas but now I'm stuck on 1.4.1 until I find a microSD that will work. My original understanding was that I should always be able to factory restore back to 1.4.0 but that doesn't seem to be the case.
I posted the [How-to] Quick Access to Nook Tablet's FACTORY RESET Screen for this type of issue. Following that guide will get you back to stock and the home key issue is explained as well.
Good luck.
I tried the 8 time reboot and when power on the 9 time it takes me CWM recovery mode. When I reboot NT now it takes me to n screen with read forever witha white background. I am stuck there forever. Can anyone help.
greenwood625 said:
I tried the 8 time reboot and when power on the 9 time it takes me CWM recovery mode. When I reboot NT now it takes me to n screen with read forever witha white background. I am stuck there forever. Can anyone help.
Click to expand...
Click to collapse
you should flash back the stock recovery using indierct's tool. and then you can do the 8 times break.
Sent from my NookTablet
I used Adam Outler's Ubuntu program for unbricking a Nook Table. It worked, bring it back from the dead. But now I have a problem. The serial number in the device information (I assume coming from the firmware) does not match the one on the nook itself. Because of this I am not able to register the Nook with B&N. Any suggestions on how to resolve this?
Thanks
I decided to make an Ubuntu restore Sd and later i sucessfully restored my nook to stock 1.4.0. I bypassed registration by holding down volume down and the book button and touching left and right bottom part of screen.This brings up a factory page and if you hold volume down and n and press bottom left again a menu button will appear in green that says bypass registration. Press that and you will get to the home screen. Now you have to download an app and check.usb debugging, etc. rerun indirect script, install cwm recovery.apk etc. and finaly put the cm7 rom onto your sd. Then turn off nook. Hold down n and power 3 sec and when in cmw format cache and devlick cache and then install the cm7 zip on the root of your sd.
PLEASE PLEASE PLEASE.......this is my first post but I have spent ALOT of time reading on here and i dont know where to go from here....I bought my nook Tablet from a friend and it came stock with 4.4.2. KIt Kat and somehow my son got my SD card that had my recovery and back ups on it and well to make a long story short, I went through a few endless boot loops, ROMS, sleepless nights on XDA and just about anything you can imagine untill it hit its 8th consecutive "loop" and here we are......biggest problem is though that I cant get into admin account on my computer sooooo....short of having to find a friends house to drag my kids off to to fix "Mommies toy" I really need some help if at all possible. My computer doesn't read this "new" nook because it was an Android the other day and I know what it feels like.....it was pretty hard having to wake up to a TOTALLY STOCK Nook from a 4.4 with TWRP and Paranoid Android.
Ps....if nothing else if anyone can point me in a real direction to reset my admin password on a HP running Windows 7 that would be great also, I would factory reset it but the settings require the password....its pretty crazy....Thank you in advance
Noob Mom :fingers-crossed
Does your SD card contain the CWM recovery and ROM backup and is still intact?
If so then you should be able to boot off the SD card into recovery (by inserting a powered USB into the NT while it's in power-off state) and and restore from back up.
digixmax said:
Does your SD card contain the CWM recovery and ROM backup and is still intact?
If so then you should be able to boot off the SD card into recovery (by inserting a powered USB into the NT while it's in power-off state) and and restore from back up.
Click to expand...
Click to collapse
Please forgive me but tell me exactly where and what I need to look for to make sure, I have a wifi file explorer opened up on my nook because I cant re-install the drivers on my Win7 pc because of the stupid ADMIN password. So can i just add\delete\move....whatever files necessary around to make it work or am i going to have to be able to connect it to my pc?? Also, when you say for me to just restore from back up, how would i do that because i cant seem to be able to boot into anything except Factory "N".
The process for restoring from SD card using SD-based CWM recovery is as follows:
Put the SD card into the NT, and boot from its power off by inserting a powered USB cable. Press and hold the N button as soon as CyanoBoot comes up to get the boot menu to display. Use volume up/down buttons to navigate, N button to select, and Power button to return to a parent menu.
Select "SDC Recovery" to load CWM recovery.
Select "Backup and restore".
Select "Restore from SD card".
...
Select "Reboot".
digixmax said:
The process for restoring from SD card using SD-based CWM recovery is as follows:
Put the SD card into the NT, and boot from its power off by inserting a powered USB cable. Press and hold the N button as soon as CyanoBoot comes up to get the boot menu to display. Use volume up/down buttons to navigate, N button to select, and Power button to return to a parent menu.
Select "SDC Recovery" to load CWM recovery.
Select "Backup and restore".
Select "Restore from SD card".
...
Select "Reboot".
Click to expand...
Click to collapse
Gosh...I only wish it was that easy....I cant get it to the CyanoBoot menu anymore.....I guess the factory reset wiped it all off....and i have back ups and recoveries all over the place Im just not sure if everything is where it needs to be or if I just need to try and start over....if so, where should I start because most of the forums I have found are older and the links dont work.....
tarachristina31 said:
Gosh...I only wish it was that easy....I cant get it to the CyanoBoot menu anymore.....I guess the factory reset wiped it all off....and i have back ups and recoveries all over the place Im just not sure if everything is where it needs to be or if I just need to try and start over....if so, where should I start because most of the forums I have found are older and the links dont work.....
Click to expand...
Click to collapse
Oh yea, I almost forgot.....my Windows 7 PC will now recognize my nook,I am just unable to install anything to the computer or run anything as an administrator.....also.....my first problem really still is that I cant get into the hidden settings to allow 3rd party apps....I must just be missing something because it really shouldn't be this hard.....Thanks
tarachristina31 said:
Gosh...I only wish it was that easy....I cant get it to the CyanoBoot menu anymore.....I guess the factory reset wiped it all off....and i have back ups and recoveries all over the place Im just not sure if everything is where it needs to be or if I just need to try and start over....if so, where should I start because most of the forums I have found are older and the links dont work.....
Click to expand...
Click to collapse
See http://forum.xda-developers.com/showpost.php?p=51377882&postcount=163 for how to install CM10.x internally on emmc.
---------- Post added at 08:52 AM ---------- Previous post was at 08:49 AM ----------
tarachristina31 said:
Oh yea, I almost forgot.....my Windows 7 PC will now recognize my nook,I am just unable to install anything to the computer or run anything as an administrator.....also.....my first problem really still is that I cant get into the hidden settings to allow 3rd party apps....I must just be missing something because it really shouldn't be this hard.....Thanks
Click to expand...
Click to collapse
It should be in Settings->Security->Unknown Source.