after applying this theme and while on arctic 2.3.0 i have the following problems:
1)In the lock screen the sound-mute buttons are not well placed
2)I don't get the launcher seen in the picture.I am stuck with the arctic launcher(home screen buttons )
3)when i try to turn off the phone it just shows the boot animation again and sends me to the home screen
4)i cant enter settings nor can i find them in the menu!!
I have tried wiping cache/ and factory rest and reinstalling everything but still the same!!
I Also have the same problem with the simplicity rom
Any help would be greatly appreciated
Related
So heres the problem. I've been waiting ages for a good phone that can play videos on the go, but after finding out that my HTC hero (GSM) only supports 2.1 android and cant run iPlayer, i thought i might as well try to install it myself. And thats when it all went wrong. I got UniversalAndroot 2.2 and now my phone just freezes on an "android" logo which was never even there before. What can i do? The only thing i can do is hold down the power and volume down buttons and get into a white screen with two options. Help please....
isnt it home and power button to go to recovry?
Have you wiped your phone data in your recovery image if not wipe your phone data/factory reset in your recovery image and also wipe your cache
It's fine guys, I managed to get into recovery, thanks for your help!
Hi, I was using CM7 + Goldenleaf for about a week.
Today the screen got black. I had to remove battery and power up. But it stucks at CM7 boot animation. Few tries later it gone past the animation but the only thing that I can see was status bar, the rest of the screen is black, nothing works.
Now I get stuck at boot animation again.
I wasnt installing anything that might have caused it.
I thaught that its maybe SD card problem, because I use A2SD, but in recovery I can go to mass stroage USB and it sees my SD on PC.
I dont want to do full wipe, is there ant solution?
Thanks.
albert107 said:
Hi, I was using CM7 + Goldenleaf for about a week.
Today the screen got black. I had to remove battery and power up. But it stucks at CM7 boot animation. Few tries later it gone past the animation but the only thing that I can see was status bar, the rest of the screen is black, nothing works.
Now I get stuck at boot animation again.
I wasnt installing anything that might have caused it.
I thaught that its maybe SD card problem, because I use A2SD, but in recovery I can go to mass stroage USB and it sees my SD on PC.
I dont want to do full wipe, is there ant solution?
Thanks.
Click to expand...
Click to collapse
Without wiping anything flash the same rom (u said CM7) which is installed from custom recovery, and reboot, that must solve your problem.
Face it man, you might have to wipe everything and start over....do a backup when you get it working, 6.5.8 has intergrated gapps but the reason you experienced that black screen with status bar seems to me like you had a problem with a missing home launcher. Just redownload 6.5.8, gapps from mediafire,goldenleaf/fserve kernel.....wipe everything, flash 6.5.8,reboot, flash everything else
Sent from my LG-P500 using xda premium
Hi my fiends, i've a big problem.. my s3 power off after battery down.. i've insert the second battery (full charge..).. power on.. but, after boot logo, nothing happened.. black screen and smartphone off..
I've tried to enter in recovery.. and work.. the screen show the full battery.. tried to wipe dalvik and cache.. (not clear totally.. i don't wanna lose everything for now..).. but nothing.. always black screen after bootlogo.
How can solve this??
I could reflash everything.. but only if it's necessary.. and.. how can find the system file where are stored sms??
I can use aroma file manager with the touch mod recovery (phil)..
Hope in a answer that help me to solve this situation..
thanks a lot mate
I seem to be having a similar problem. Any help would be greatly appreciated.
i did a simple rom reflash.. without full wipe.. and system power on.. now do backup and reflash
Hi guys, I've installed many CFW without problem, until I installed the latest PACMan build. I didn't like it so I reflashed the Hasa v6, that i've been using for a while, and the phone just got kind of "crazy". I tried to wipe/format/wipe delvik, flash another rom via recovery, flash the stock FW with flashtool, still the problem continue.. I'll try t make a short list of the problems:
- Lockscreen usually hangs the phone, screen goes all black and playing with the power, after a while, it goes back sometimes
- Some force-closes (mainly the system process)
- Sometimes I can't boot to CWM, the "back" and "option" touch-buttons keep lit, and that's it, sometimes I can
- Also the battery status doesn't seem to be working properly, I charge it and it never pass the 30% mark, or get stuck on a number beforr it
How can I do a "brute-force" wipe, or something like that to restore my phone to it's normal state? These issues are driving me mad, and I can't see a solution..
Thank you very much!
The device is a Sk17i Mini Pro
Try flashing a kernel like LuPuS v3 or MESA Hybrid v3.7 via Fastboot and then flash the latest ROM that was working flawlessly.
Thanks, I tried with mesa and Lupus and after that, the same issues seem to occur..
Adding problems:
- I started having the "build prop" error, always when I flash CM-based roms, and I never had this issue before these problems (I do the workaround to install them by editing them with notepad++ and removing first lines..)
- The phone, once in a while, stay with the back and menu buttons lit for ages..
- The phone doens't turn off completely (menu and back and the screen stay lit, the screen is black, but it's ON), the only way to truly turn off is removing the battery..
- When I choose "power off" from the bootloader, the same issue occurs, the screen stay lit in black and phone doesn't turn off..
Please help.. I just don't know what is happening and it is so frustrating.
I rooted my HTC One and flashed viper one and it said it was installed sucessfully.
I get taken through the initial setup, but after that, my home screen is black and I can't do anything with my phone. Any idea what is going on and how I can fix it?
Also, I tried rebooting my phone and when it starts back up, it gets stuck on the viper one logo. Its been on the logo for a few minutes now....
I have the same issue. I tried wiping the Dalvik cache but when it rebooted it froze at: "Android is upgrading... starting apps". I turned off the power and when it turned back on it got stuck on the boot ViperOne logo screen.
Did you by any chance get an error saying "Unfortunately, setup has stopped" after the initial setup? I got that, and then the black screen. It was just the home screen that gave a black screen. I could see the lock screen, bring down the notification bar, recent apps screen, I could even get into settings within the notification bar and everything. Just the home screen that's black and not operational.
SakreD said:
I have the same issue. I tried wiping the Dalvik cache but when it rebooted it froze at: "Android is upgrading... starting apps". I turned off the power and when it turned back on it got stuck on the boot ViperOne logo screen.
Did you by any chance get an error saying "Unfortunately, setup has stopped" after the initial setup? I got that, and then the black screen. It was just the home screen that gave a black screen. I could see the lock screen, bring down the notification bar, recent apps screen, I could even get into settings within the notification bar and everything. Just the home screen that's black and not operational.
Click to expand...
Click to collapse
FIXED!!!!!!
I did get the error saying setup has stopped. Here's what I did to fix it.
From black screen. Reboot into recovery mode. Did a full wipe of my phone (cache, dalvik, system, data, just delete everything...everything will be gone).
Unzipped viperone.zip on my computer to get the boot.img
From fastboot I used adb sideload to push the viperone.zip onto my phone and installed.
Did not reboot after install
Flashed the boot.img onto phone. Reboot.
Everythings working!
Not sure if every step I did was necesarry, but its working great now. I think it had something to do with not completely wiping before the first install. Hope it works out for you.
jkusc said:
FIXED!!!!!!
I did get the error saying setup has stopped. Here's what I did to fix it.
From black screen. Reboot into recovery mode. Did a full wipe of my phone (cache, dalvik, system, data, just delete everything...everything will be gone).
Unzipped viperone.zip on my computer to get the boot.img
From fastboot I used adb sideload to push the viperone.zip onto my phone and installed.
Did not reboot after install
Flashed the boot.img onto phone. Reboot.
Everythings working!
Not sure if every step I did was necesarry, but its working great now. I think it had something to do with not completely wiping before the first install. Hope it works out for you.
Click to expand...
Click to collapse
Oh I had already tried that and it didn't work What DID work though, was wiping and re-installing without selecting "Complete removal of sense"
Help me plsssss
Holy **** sorry for the language but ****ing a! I have been trying to root my phone all god damn day. Finally I got it going then it boots up has a ****-long process optimizing apps then i go through the regular process of setting up accounts. One minute later the phone starts crashing and says ui isnt working or something along the line of that. Phone goes black and now its saying ANDROID IS UPGRADING STARTING APPs well been looking at that for a while now.
It seems you guys were able to shut your phone off... HOW THE **** DID YOU DO THAT ive help the power down for a long ass time ive held the power with the volume nothing idk what to do at this point. **** YOU ATT for driving me to this point to get 5.0