I just ordered it, i know the reviews stink and its been bashed but i want something sleek that doesn't add bulk and i also already have a skin coming for the back.
figured a skin with the sleeve may be perfect for me.
i can't stand these bulky leather cases.
Very strange here... I got my wife the pink one back on 12/22. I got my black one last week.
My wife's is a piece of crap. Fell apart within 2 days of starting to use it. I use mine a lot more that she does, and I've had no problems with mine...
Very happy so far with mine, and hate her's.
I loved the concept of slim & minimal & uses the keyboard slots but the reviews & laughable price scared me off.
chamberc said:
Very strange here... I got my wife the pink one back on 12/22. I got my black one last week.
My wife's is a piece of crap. Fell apart within 2 days of starting to use it. I use mine a lot more that she does, and I've had no problems with mine...
Very happy so far with mine, and hate her's.
Click to expand...
Click to collapse
hmm strange.. thanks for the feedback.
AS long as you protect the back from being scratched and don't care there is no closure clasp/magnet I am sure it's fine...a little spendy though.
I just got mine today. So far, I like it. My idea is that I'd either use this or the keyboard dock (which requires I find one and buy it, which has not yet happened).
I did put a small piece of clear tape on the outsides of the holes the cover clips into for a bit of protection. Honestly, I can hardly tell the tape is there.
I wish someone would make a product exactly like the transleeve, however with a thin & clear TPU back that the cover would hinge onto, and that would add the magnets necessary to keep the cover in place.
I guess it can't hurt to dream
I got mine today and absolutely love it. Very thin and light. Exactly what i wanted. Why would i cover the back of this beautiful device.
Sent from my Transformer Prime TF201 using Tapatalk
FWIW i got mine yesterday and i too love it. it does what it says it does. it adds no bulk, protects the screen and acts as a useful stand.
sure its pricey but w/e. its better for me than a bulky 3rd party case that makes the device look terrible.
i have a skinomi skin coming today, that along with the sleeve i think will be perfect for me. no bulk and protected.
I have mine since December and I have had zero issues. I love it.
My black cover is arriving today. I purchased the clear Skinomi back protector and screen protector to help eliminate scratches. From the feedback, it seems like as long as it doesn't fall apart on me I will be pleased.
I have a neoprene case that I carry it in and wanted to have a cover/stand to prop it up and this is PERFECT. I'm very eager to test it out tonight when I get home, it should be a good addition.
Where have you guys been buying the transleeve? Any cheaper than $40?
felisen said:
Where have you guys been buying the transleeve? Any cheaper than $40?
Click to expand...
Click to collapse
I searched amazon and it showed they had a used/like new one so I bought it for $30. I can return it if I don't like it so I figured I would save a few bucks. It's probably someone who freaked out and returned theirs when they heard about scratching.
i got my used off amazon as well for $30.00 free shipping. was perfect shape.. like it so much i might get the actual color i wanted (green) as well.
I was liking mine until my Prime slipped off my desk and hit right on one corner. The transleeve just popped off and there's now a nice little dent. Still works, but fair warning--it doesn't provide much protection in a fall.
I actually really like it. If you're generally careful with your tablet and your main concern is protecting the screen from scratches, I think it's perfect. I'm very happy with the combination of the transleeve and a neoprene case/sleeve for traveling.
Sent from my Transformer Prime TF201 using Tapatalk
Here's what mine looks like. I'm very pleased with the sleeve. I have the Carbon fiber full body screen protector to compliment the black sleeve. It's not ment to be impact resistant so be careful where you set your tablet down. I also added some tape around the corners so that the connectors don't scratch the edges.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
looks awesome, I am putting this exact skin on mine. Are you happy with the gray tablet? I initially ordered that and have it, but I also ordered the champagne. I think I want the small contast of the silver/champagne sticking through. I got the cover for the dock too.
gk325 said:
looks awesome, I am putting this exact skin on mine. Are you happy with the gray tablet? I initially ordered that and have it, but I also ordered the champagne. I think I want the small contast of the silver/champagne sticking through. I got the cover for the dock too.
Click to expand...
Click to collapse
I do like the Amethyst Gray. Especially now with the carbon fiber skin. I think it compliments it better vs the Champagne. The lighter color of the Champagne will show all the little pieces to the carbon fiber skin which will look tacky and cheap imo. The darker tones of Amethyst Gray hides all the seperations better.
I bought one before I even had the tablet. I love it, as it's light and slim and protects the screen without bulk. I also have the keyboard dock, but since my need for that is less routine, the Transleeve is the go-to cover for me and has served me quite well so far.
---------- Post added at 02:14 AM ---------- Previous post was at 01:51 AM ----------
I love mine, but I'm weird that way, I guess.
Related
Quick Review...yes its copied from the other thread that I posted in. But I figure plagiarizing my own stuff is ok. Plus, there are pictures now!
Material: Definitely not real leather. Is PU Leather but doesn't feel "cheap" in the hand either! Inside of the case is a velvety "soft" material...I guess a cloth version of suede is the best way to describe it. (Definitely not Alcantara like the stuff I have in the bucket seats of my car.)
Workmanship: Can't complain here either surprisingly! I was expecting it to be well, just ok....but the stitching is straight and even, uniform distance from the edges (yeah I'm sure there are tenths of mm variations but...nothing distracting.) Holes for camera, proximity sensors, buttons, etc. are PERFECTLY aligned when the TF is properly inserted.
Closure: Magnetic...decent snap to it. There's magnets on BOTH ends of the case so it is quite secure.
Holding Mechanism: One of the weaknesses of this case. It has a flap that is on the landscape edge facing into the spine of folio case. Should have put a magnet or two in there to keep the flap more securely closed. Or Velcro. I think I'm going to add some velcro there myself. On the other hand, I think it is far better to have the flap on this side than along one of the portrait edges of the Tablet.
Stand angles: 2 actually, one inverted "low position" suitable for typing. One high angle for casual viewing I guess.
Conclusion: 1 thumb up--not two--because of the ridiculous pricing on these cases, $28 including shipping. Seriously, these things can't cost more than $5 in China where they are made.
Pictures:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Can you get to the charging port while it is in the case?
Sent from my ADR6400L using XDA App
ctinsley said:
Can you get to the charging port while it is in the case?
Sent from my ADR6400L using XDA App
Click to expand...
Click to collapse
Looks like there's a cutout in the tuck in flap but no cutout on the main cover. My guess is you can charge the transformer while in the case but that the cover has to be open.
Where did you get it? Was this one of the generic eBay ones?
I just got this case today (took about two weeks to arrive), and I'm thoroughly satisfied. It has holds for everything, even the Micro SD slot. Most importantly, the Transformer feels protected.
I just received mine today. I bought the brown version. It fits OK but overall the case is not of the highest of quality for instance there is a finger size mark on the front of the case. Can't help thinking in a couple of weeks the transformer will be slipping inside of the casehousing.
The listing on eBay said leather and I am going to complain and request a partial refund because it is definately not leather being some kind of ruberised finish and a joke of an attempt to show leather grain. I feel like I have been mislead....
tophkw said:
http://www.aliexpress.com/product-f...ree-shipping-wholesalers.html?CatId=100008232
there is a multi-angle adjustment case
Click to expand...
Click to collapse
Why are there so many people trolling the "FolioGuard" case in everyone else's threads? WTF? People KNOW there's the FolioGuard case. The point is THIS ISN'T THE FOLIOGUARD CASE AND IS A REVIEW OF A DIFFERENT CASE.
SoCalTiger, I got this one from eBay. Here is the link:
http://cgi.ebay.com/ws/eBayISAPI.dl...&ssPageName=ADME:X:RTQ:US:1123#ht_5978wt_1018
I'm beginning to wonder whether this one IS genuine leather and NOT PU leather at all. I've "aired" it a good number of days and it STILL smells/feels like leather. The patterned marks don't seem to be pressed/printed into the case at all. There's a few other tests I can "run" to see if its real leather or not (including the "match" test, but I don't really want to ruin the case either).
Thanks!
verkion
andyzarins said:
I just received mine today. I bought the brown version. It fits OK but overall the case is not of the highest of quality for instance there is a finger size mark on the front of the case. Can't help thinking in a couple of weeks the transformer will be slipping inside of the casehousing.
The listing on eBay said leather and I am going to complain and request a partial refund because it is definately not leather being some kind of ruberised finish and a joke of an attempt to show leather grain. I feel like I have been mislead....
Click to expand...
Click to collapse
Can you send/post the link for the one you ordered that you are not happy with? There DEFINITELY was NO option for "another color material" for this case. Just the variation in stitching color.
http://cgi.ebay.co.uk/Asus-Eee-Pad-...I&otn=3&po=LVI&ps=63&clkid=419235527009776241
3 different colours. Think I saw your link to the seller originally or you posted on the same thread I was reading. They were selling different colours under another listing. Anyway from the pictures you posted it is identical to mine... I think the ebay listing is misleading regarding the material.
Are you sure it isn't leather? I haven't tried the melt vs. scorch test on it yet so I'm not 100% sure. It feels like a really thin layer of leather over a harder backing...
Sent from my HTC Vision using Tapatalk
tophkw said:
URL DELETED
just like this !
Click to expand...
Click to collapse
Okay, that's it. I'm going to report every single one of your posts to have them deleted. All you are doing it trolling with your links to the FolioGuard.
100% certain its not leather. Got a reply from the the seller saying it is pv leather (I understand this to be a man made material and will never have been anywhere near a cow) which is fine but they should state this al the way through the listing. I have asked them to amend the listing and requested a part refund. If not I will report them to eBay and see what think
I am sure most people would be happy with the case and i agree with your review it does a reasonable job of proteting the Asus. The stitching is good but there is a small defect on the front of my case which
i like this case, might have to get one
well I am happy with the case seeing as i have just received a full refund. I do not need to return it either. So feels like a bargain now! Just shows you it is worth complaining. I hope they amend the listing to make it clear this is not leather for other people.
andyzarins said:
well I am happy with the case seeing as i have just received a full refund. I do not need to return it either. So feels like a bargain now! Just shows you it is worth complaining. I hope they amend the listing to make it clear this is not leather for other people.
Click to expand...
Click to collapse
Nice! It does say "Leather PU" now.
andyzarins said:
well I am happy with the case seeing as i have just received a full refund. I do not need to return it either. So feels like a bargain now! Just shows you it is worth complaining. I hope they amend the listing to make it clear this is not leather for other people.
Click to expand...
Click to collapse
You sir...are awesome! LOL. I should request a partial refund too! And I got 2x of them. Can't beat free!
verkion
My case arrived this weekend, but I guess I don't need to do a review either.
It's definitely a decent case for an alright price. Build seems good and does the job perfectly.
No complaints really.
Anybody know if this is the same case? http://electroniccrap.com/store/index.php?main_page=product_info&cPath=34_36&products_id=51
I found these in a search, ordered one and the quality is very good. These people do some awesome work with leather.
OberonDesign.com
zikzak1 said:
I found these in a search, ordered one and the quality is very good. These people do some awesome work with leather.
OberonDesign.com
Click to expand...
Click to collapse
Jebus! That's expensive.
Here's a direct link to the Nook Covers... And yes... expensive but you get what you pay for...
http://oberondesign.com/shop/cart.php?m=product_list&c=83
$67 cover for a 249 tablet.....I hope that's free shipping. If not, its over $70, which is almost 30% of the cost of the tablet.
Sent from my MB860 w/CM7.1 with xda premium
Yeah, it's kind of pricey but if you can afford it I totally understand getting a nice one. It's something you'll be holding for hours and hours. And I'd rather cover a really cool tablet with nice leather than cheaper plastic.
I don't think I can afford this one but I will be looking for a nice leather one. I have good leather on my Nook Simple Touch and love it.
Sent from my BNTV250 using Tapatalk
They are very nice, very good quality leather, very good craftsmanship. Hand made after you order so allow an extra day. They might do custom tooling for you as well if you ask.
(tried to quote dkb218, but due to a link within the quote I cant do that yet!)
or you can go on ebay and buy a nice leather folio case from hong kong for ~$8...
...and it won't be hand-made in Santa Rosa, California, and won't be nearly as nice...
But, yeah, I can't afford one of those either.
Just buying 2 Nooks for xmas gifts and reeling from the intial cost. It isn't in my budget this year. But I really like them. I will hang onto the link for a possible Birthday or an xmas gift for next year..
Thanks.. I looked at the ones at B&N when I picked up the nooks and did not like them at all. Except for black, all the color ones were like neon colors which is not my taste, and made them look cheap.. Black just looked blahhh.. I like a darker deeper richer color as these leather ones seem to have.
One Note. I noted the B&N covers had holes in the cover for air.. I would imagine not a need unless you like to close the cover and leave it on. With all the cardboard & wool & leather on these covers, I don't think the air holes are there.
moose_tracker said:
I would imagine not a need unless you like to close the cover and leave it on.
Click to expand...
Click to collapse
What!? But then your Nook might suffocate!
(Why would they have airholes?)
Also, I wish I never looked at this thread, since those are really nice covers at Oberon design.
I got the Medici Nook Color cover in brown from OberonDesign. Worth every penny!
I got the same in purple!!
So, I just received my Oberon NT cover that I ordered a little less than two weeks ago - AFTER the shipping cutoff date that was on the site. They totally shipped before Christmas, and not way after Pretty impressive. I got paisley in green, and it's a bit darker than on the site (which is good, it's not garish at all).
They're really, really, really nice covers - not just the leather, but the fit is an exact match. The straps that hold in the device are exactly fitted, they are designed to not cover buttons or the wifi area, there is storage space in the case for papers, the cover folds back nice. About the only thing missing is a way to prop the cover up for viewing (the only thing the Kindle Fire version had). This is one of those things that, after the device it is designed for dies and it doesn't fit any similar device, is going to get converted into a sketchbook/notebook cover.
very nice wood/book covers for nook devices
There's an outfit in Minnesota that does a very nice wood/book cover for a bunch of things.
The nook color/tab cover is 40 bucks, so for both of you who aren't returning your devices to BN by Dec 26 - or who want to see if they make a case for the device you're replacing it with - check 'em out.
Pad and Quill:
http://www.padandquill.com/cases-for-kindle-nook-ereader/nook-color-case-the-nookbook.html
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
moose_tracker said:
Just buying 2 Nooks for xmas gifts and reeling from the intial cost. It isn't in my budget this year. But I really like them. I will hang onto the link for a possible Birthday or an xmas gift for next year..
Thanks.. I looked at the ones at B&N when I picked up the nooks and did not like them at all. Except for black, all the color ones were like neon colors which is not my taste, and made them look cheap.. Black just looked blahhh.. I like a darker deeper richer color as these leather ones seem to have.
One Note. I noted the B&N covers had holes in the cover for air.. I would imagine not a need unless you like to close the cover and leave it on. With all the cardboard & wool & leather on these covers, I don't think the air holes are there.
Click to expand...
Click to collapse
If you are talking about the "n" cover, the holes are stylistic. I have one of the faux leather B&N covers and it has no holes.
I like these oberon covers but I like how the 1st party covers click the nook in place as opposed to elastic. How do these work?
Sent from my BNTV250 using xda premium
dragon_76 said:
I like these oberon covers but I like how the 1st party covers click the nook in place as opposed to elastic. How do these work?
Click to expand...
Click to collapse
There are 3 heavy leather straps that fit snuggly - two larger ones at the bottom and one slightly smaller with a bit more give at the top left corner. You slide the nook into the bottom two, pull the third leather strap a tiny bit, fit the nook in there, then stretch the top right elastic over the top right corner. It's actually really snug in there, but doesn't require much pushing/pulling. I was expecting it to be less precise, more stretching etc. It's easy to take in and put in, and doesn't move at all in the cover. I have no idea how they make them by hand with this much precision - I guess test it on an actual device on every cover. Anyway, nice work, and the smell & look inspires me to pick it up for reading (versus games), which is half the goal of a cover imo for the easily distracted (me!).
Just wanted to give everyone a heads up. This case is awesome. I first wanted one when I got my Skullcandy case for my iPod touch and have been waiting for one built for an Android phone since. I like the case because it doesnt fall apart like other hard cases when its dropped. It slides together with the small black bottom piece and stays together. I found it pretty cheap on eBay and would highly recommend it. Matches the phone colors perfect with the deep red.
http://www.bodyglovemobile.com/product/htc-rezound-icon-case-red-flat-back-no-clip,339,19.htm
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Nice! Thanks for the heads up. How difficult is the case to get off incase you need to do a battery pull?
just ordered one in red. i was stuck between the commuter case and this icon case. for 8 bucks shipped. why not?! thanks
Pretty easy. It fits snug because of the felt lining inside the case but it's easier than one of those hard jelly cases
Cool, thanks!
@quikfinger00 is this the auction you bought from? http://www.ebay.com/itm/Body-Glove-HTC-Rezound-Icon-Case-Red-Flat-Back-Free-Shipping-9248201-/120840910311?pt=PDA_Accessories&hash=item1c22adf5e7#ht_918wt_1141
+1. This case is awesome. I've had it for a month. Last I checked, Amazon also had it for a decent price. (Not as cheap as eBay though)
...Sent from my Tab
Yup! Surely is ill let you guys know how it is when I receive it in the mail
Sent from my HTC Rezound
thanks 06stang and quikfinger00. I just bought one off ebay as well. I also have the commuter so I'll let you guys know what I think about the differences once it comes in!
Hey fellas. My case came in yesterday! this case surpassed my expectations. The red color is more of a dark metallic color and actually looks pretty beastly. All my prior phones (blackberries, voyager, incredible, DROID x, thunderbolt, gnex have had black cases but I really have to say that the color on this case is the shnit. I love the soft rubber feel and like the nice lip around the screen. Thin enough to keep the phone thin but thick enough to keep the phone safe in case of drops to the face. The interior has a quality feel (soft velour) to it and the phones fits snugly in the case. The case is also easy to connect together and remove for easy battery swaps. I have a otterbox commuter case coming in as well but I think I'll be keeping this one on more often except for when I need added protection or a more professional look for business meetings, etc, etc. I'll post pics tomorrow and will post back about my quick thoughts for the commuter case..
Sent from my HTC Rezound
Hey guys, so I've been using the body glove case for a couple days now. I definitely like the slimmer form factor compared to the commuter.
Pros: Definitely slimmer then the commuter.
It fits and covers the phone nicely so you see the whole screen (the commuter covers about half the htc logo).
Quick to get off in case you need to pull the battery.
Appears to be pretty sturdy and has a really snug fit.
Has a little bit of a less slippery back since its very lightly textured.
Has openings for the mics and what not where the commuter covers some of them
Colors and look is sweet.
Cons:
It doesnt have any internal padding on the sides so I dont know how well it would protect the phone from a hard drop if it landed anywhere besides on its back.
The back is still kind of slippery, but a little less then the commuter feels imo.
So far I like it and will probably only use the commuter at times if I know im going to be doing something that its more prone to getting dropped liked going out to the bars.
Hope this helps anybody thats been kindof iffy on whether or not to buy
PaulQ602 said:
+1. This case is awesome. I've had it for a month. Last I checked, Amazon also had it for a decent price. (Not as cheap as eBay though)
...Sent from my Tab
Click to expand...
Click to collapse
Any paint chipping off? Considering the gray/black one.
Theres a tiny bit of paint chipping where the two pieces meet. It also seems like theres a bit of metal underneath that paint. Maybe its just chrome plastic. This case looks to be of much better quality then previous cases made by body glove
Sent from my HTC Rezound
Had the case since the beginning of January and it's looking fantastic. No drops but lots of sliding around on tables and banging around a car shop.
I bit on this case because of this thread, just got it in.
it is light years beyond the oem htc plastic case from verizon with the red back/htc logo...
this case is the bees knees for me so far... love it.
I have this case also...
Along with a Seidio Active case...
The Body Glove does fit very snug on the ReZound...
Question I have is, has anyone had an issue with the case scratching the gloss edges of the phone?
I had this issue with my Dinc and a Seidio case.
Lego
ya, i've had the body glove case put some small scratches on the 'chrome edge' of the device... nothing i can't forget about, but it's definitely noticeable.
Just dropped it for the first time while walking the dog. Ouch...
Pretty much killed the top edge of the case. Bummer
Sent from my Transformer Prime TF201
I've had mine for a few months now, It's still in descent shape, had a few falls. It fits great, and looks good. I use it in combo w/ the zagg shield.
It did scratch the chrome around the edge of the phone, but nothing to terrible.
overall a great case.
I just purchased this. I've been looking for a decent case. I did like the Body Glove when I had it on my Original Droid, although it was a poor design because of the Droid's slide-out keyboard, but I still liked the feel of it. Looking forward to this. I should get it by the end of this week coming up.
I really like this case. Definitely better than the hard rubber one from Verizon.
They do listen! Skin cases are finally here
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Credit: PCTABLETCASES
Will this still fit into the dock?
Sent from my Transformer Prime TF201 using xda premium
cullenmq1 said:
Will this still fit into the dock?
Click to expand...
Click to collapse
There doesn't appear to be any cutout, from the picture, so unless these are amazingly thin (which would make them somewhat useless for protection), I don't think they'll work with the dock.
But if they're easy to remove and put back on, they'd be suitable to use when the TP is out of the dock.
Has anyone ordered one of these? Just worry 'bout the quality and fit.
I wonder if they protect enough for a fall, has anyone tried this product?
I would actually like to know how is the fit with the prime, i think with such a big skin the long bezel sides won't be well adjusted to the Prime and might be too loose.
Found them in Amazon Germany, but no reviews yet :/
cullenmq1 said:
Will this still fit into the dock?
Click to expand...
Click to collapse
No. Based on the images of the green-colored case on Minisuit's site it's obvious that the TPU is too thick to fit into the dock. This being the case, I would have preferred that they fully cover the 'lock-in' slots on either side of the power connector, so they don't fill up with dust.
It seems like Minisuit had some engineer design it who didn't know what all the holes where for. BUT I'll stop complaining. A silicone case for $7 (shipping included) is great!
nerdsisme said:
Credit: PCTABLETCASES
Click to expand...
Click to collapse
I wonder if these are like the ****ty loose ones from eBay people tried
Bruuce said:
It seems like Minisuit had some engineer design it who didn't know what all the holes where for. BUT I'll stop complaining.
Click to expand...
Click to collapse
It is kind of remarkable that a company would go to the trouble of manufacturing these, but NOT bother to even see what the ports and opening actually do, to intelligently decide whether or not they need a cut-out?!?
Sheesh.
Worth a shot
Lock-N-Load said:
I wonder if these are like the ****ty loose ones from eBay people tried
Click to expand...
Click to collapse
I got one of those loose ones... pretty disappointed. I'll try this though, 7 bucks shipped is worth a try. I'll let yall know.
Lock-N-Load said:
I wonder if these are like the ****ty loose ones from eBay people tried
Click to expand...
Click to collapse
These appear to be the exact same skins just in a different color, which means that the center of the back is likely to be a little bit loose, just like with the black cases.
Mine shipped today, estimated arrival of 5/8. I'll keep ya posted.
Blah
It definitely feels like the same case, however this new one I got seems to fit a little better at the back, with less sag. I'm not sure if it was just a manufacturing difference or what. This case still has the same flimsy feel around the bezel.
My suggestion is to keep looking for another thin silicone case, if you want to give this one a shot it might be worth the 8 bucks though. I'm leaving this minisuit one one for now vs the other one I got off ebay.
Still in the market for a thin non-leather silicone type case. If anyone has seen the HP branded case for the Touchpad, that would be a near perfect case imo, with a magnetic closing mechanism or something.
Edit: After a day or so of use with the minisuit case, I feel like it is basically as good as this skin type case can get without a major overhaul. The back isn't sagging like the original one from ebay did, however the edges are still could be a little tighter (This is where the redesign would come in,) but overall its pretty good. I'm still interested in a slightly thicker version of this, it still doesn't add much protection.
For those interested, a company, BobJ Gear, is coming out soon with a very nice, silicone case for the Transformer Prime.
He's already made cases for the Toshiba Thrive, which gets rave reviews on Amazon, where they are sold.
I was lucky enough to receive one of his prototypes.
This is a tight fitting case, made from food grade silicone, very thick to provide excellent protection! Access to all ports are available. One of the photos below shows you a comparison between the cases soon to be released by BobJ Gear (shown in purple) and the case discussed earlier in this thread (the green case, on top). You'll see there's a noticeable difference in the thickness of the case, and the amount of silicone used to make the case.
This adds a little bit of weight, but provides great protection for the Transformer Prime! Case will also work for the T300, and he's planning to release a case for the T700 down the road!
These should be available end of this month.
Here are a few photos.
ShelW said:
For those interested, a company, BobJ Gear, is coming out soon with a very nice, silicone case for the Transformer Prime.
He's already made cases for the Toshiba Thrive, which gets rave reviews on Amazon, where they are sold.
I was lucky enough to receive one of his prototypes.
This is a tight fitting case, made from food grade silicone, very thick to provide excellent protection! Access to all ports are available. One of the photos below shows you a comparison between the cases soon to be released by BobJ Gear (shown in purple) and the case discussed earlier in this thread (the green case, on top). You'll see there's a noticeable difference in the thickness of the case, and the amount of silicone used to make the case.
This adds a little bit of weight, but provides great protection for the Transformer Prime! Case will also work for the T300, and he's planning to release a case for the T700 down the road!
These should be available end of this month.
Here are a few photos.
Click to expand...
Click to collapse
Not a fan but im glad to see more cases popping up.
Ordered from China - I was thinking about importing more for other devices and selling them on if they were good enough, as there's an absence of silicone cases on the market here.
So, it comes in a rather nice plastic sleeve with Sikai all over it, and a very inspirational slogan: "Design originates from life. Specialization achieves quality." All good so far! I'm more impressed than I expected to be. Except with the slogan. It's not inspirational.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
So I open up the sleeve. Immediately notice a really acrid rubber smell, even a few feet from the case. It's horrendous. It smells like there's been a friction fire in a condom factory. I've smelled more pleasant things coming out of my cat. You might expect this to be just the new rubber smell, but a rinse off doesn't get rid of it. No, this smell is here to stay. This certainly isn't the food grade material you get on some others. You'd be lucky to live if you ate anything off this.
Not that these things are designed for having lunch off, of course - but there's a trend today away from caustic rubber smells, BPA and parabens, and this doesn't try to follow. I wouldn't want any of the small things in my house chewing on this.
The smell is more bearable after a while. It's probably destroying my nose hairs. Okay, front view.
It looks okay. So some parts of it do take a big nod toward quality. The feel of the case is nice - the textured cover certainly won't be slipping out of your hands, and it's reasonably thick. The logo imprinted inside the case is a nice touch, too - that little extra bit, even though it's basically just a bit of blown rubber, adds to the overall impression of it.
The holes for peripherals, sensors and the cameras are nice, too - there's no spare silicone hanging off the holes, and overall it's really well made.
The back is just as nice. That textured feel is present all the way around. The Sikai logo is nicely imprinted - the detail is good. Overall, having a good feeling about it.
Okay, let's slide in the TF300T...
It goes in easily. Probably slightly too easily - after literally no struggle at all, the pad is in the case. And here's where the problems start.
Although the case fits snugly around the back, with all the holes matching up to the ports and sensors, around the front it's a different story. The front camera holes and sensors don't fit snugly - they're a few mm from the case holes, so that renders the front camera useless. You end up just seeing the ill-fitting case. All around the front of the case, the poor fit is the same:
But the holes fit nicely around the rest of the case: there isn't a mismatched hole, everything fits in and the volume buttons are taken care of nicely. They work very well.
However, leaving it on for a while, the deficiencies become apparent. That smell is back every time you get close to the tablet. Naturally, you may as well forget about using your front camera, too: it fits so poorly that it's entirely obscured by the case unless you hold it down to the glass. And the case starts to pick up the smallest of dust particles - not only that, but they stick to the case like... well, like the bad smell that the case also came with. They're a nightmare to get rid of. You're not cleaning this one in a hurry. And when you do clean it, it's going to get filthy again really quickly.
Alright, this is the black one - and we all know that black things show the dirt more. But the textured cover, while very impressive and grippy, just serves to attract dirt that gets stuck in the textures.
Not a great case - those fundamental flaws are the smell, the way dirt gets lodged in there and the extremely poor fit. "Specialization achieves quality"? It clearly doesn't. I think this is going in the bin - unless I find out a way to shrink it onto the pad, and then spray it with Febreeze every day.
Check this post out. I bought a silicone case off EBay that fits perfectly. Also, no acrid smell either. I have also listed my other purchases for my tablet in this post. The only thing missing is the dock. I just got it the other day from Office Depot. The manager even matched the price Walmart had online. I paid $119 for the dock.
http://androidforums.com/showthread.php?p=5315630
Sent from my Transformer Pad TF300T using Xparent Purple Tapatalk 2
wetbiker7 said:
Check this post out. I bought a silicone case off EBay that fits perfectly. Also, no acrid smell either. I have also listed my other purchases for my tablet in this post. The only thing missing is the dock. I just got it the other day from Office Depot. The manager even matched the price Walmart had online. I paid $119 for the dock.
http://androidforums.com/showthread.php?p=5315630
Sent from my Transformer Pad TF300T using Xparent Purple Tapatalk 2
Click to expand...
Click to collapse
Interesting. I was looking at a folding case instead. Something that's very similar to the first one - does the tablet fit pretty snugly?
Either that or a revolving one. They're just bulky, though. Kinda defeats the point of a thin and light tablet.
dontsurf said:
Interesting. I was looking at a folding case instead. Something that's very similar to the first one - does the tablet fit pretty snugly?
Either that or a revolving one. They're just bulky, though. Kinda defeats the point of a thin and light tablet.
Click to expand...
Click to collapse
Oh yes, It fits the tab perfectly and I'm actually very impressed with it. Now that I've gone and bought a dock, I won't be using it as much as I would like.
I just bought a Poetic leather case for the dock and keyboard. According to the details and the reviews, it's all real leather and not the PU leather a lot of the cases are made of. I'll have it the first or second week of January and post a review for it.
Here's a link for it.
http://www.amazon.com/gp/product/B007ZE26CO/ref=oh_details_o00_s00_i00
Silikon Case TF300t
I guys
i bought this silikon case for the tf300 t
http://www.amazon.de/Skque-Silikon-...FLII/ref=sr_1_1?ie=UTF8&qid=1357057904&sr=8-1
Have also the same problem as User in post 1