Related
So whenever I try to flash CM10, I cannot get past the white HTC Screen. I have wiped the system, wiped cache, wiped dalvik cache, and then installed the CM10 zip and the Gapps zip. However, after rebooting, i just get stuck in the white HTC screen and I end up having to pull the battery and restoring my nandroid. I am using twrp. I am on S-ON, I think it has something to do with not having a PH98IMG.zip file? Is there one for CM10? Am I doing something wrong in my installation process?
Any help would be greatly appreciated
gleggie said:
So whenever I try to flash CM10, I cannot get past the white HTC Screen. I have wiped the system, wiped cache, wiped dalvik cache, and then installed the CM10 zip and the Gapps zip. However, after rebooting, i just get stuck in the white HTC screen and I end up having to pull the battery and restoring my nandroid. I am using twrp. I am on S-ON, I think it has something to do with not having a PH98IMG.zip file? Is there one for CM10? Am I doing something wrong in my installation process?
Any help would be greatly appreciated
Click to expand...
Click to collapse
Download the ROM on a computer and extract the boot.IMG to your platform tools directory (assuming you have SDK installed) then go into your command prompt and CD your way to platform tools and type "fastboot flash boot boot.img" do this after flashing the ROM. Then boot. Reboot to recovery then flash gapps (if you flash gapps and a ROM at the same the then it is very buggy)
Sent from my ADR6425LVW using Tapatalk 2
heyis4horses said:
Download the ROM on a computer and extract the boot.IMG to your platform tools directory (assuming you have SDK installed) then go into your command prompt and CD your way to platform tools and type "fastboot flash boot boot.img" do this after flashing the ROM. Then boot. Reboot to recovery then flash gapps (if you flash gapps and a ROM at the same the then it is very buggy)
Sent from my ADR6425LVW using Tapatalk 2
Click to expand...
Click to collapse
Thanks for the quick response. So after i flash the ROM, do i reboot and then type "fastboot flash boot boot.img" or do i just leave the device in recovery and then type the command? I suppose its the latter, gonna try it right now
THANKS
gleggie said:
Thanks for the quick response. So after i flash the ROM, do i reboot and then type "fastboot flash boot boot.img" or do i just leave the device in recovery and then type the command? I suppose its the latter, gonna try it right now
Click to expand...
Click to collapse
Oh nvm I got it working THANKS A MILLION, you're the best
Hello,
I am a complete noob when it comes to dealing with phones.
I have a Sony Xperia Sola (firmware 6.1.1.B.1.54 ICS)
I downloaded Rom Manager via Play Store and want to flash a custom rom.
But whenever I try to select the option "Reboot and Install", only a normal boot happens.
How do I reboot and install the rom?? I have tried the button combos (power+volume - and volume +) but nothing works.
Please help!
PS
I am
-rooted
-bootloader unlocked
-clockworkmod recovery via recoverX
-rom is [ROM] Unoficial JellyBean stockrom 6.2.A.0.400 Sola
I understand that the rom you mentioned is recently ported and also deleted from development section of sola (munjeni rom).
According to his instruction, you need to do following thing:
Enter fastboot mode (off phone then hold volume up and plug cable)
Flash boot.img in zip Rom file to phone (fastboot flash boot boot.img)
Turn on phone and enter recovery menu (on phone then spam the volume down)
Do the clear data, cache... then install the zip file (rom)
Done.
Why was the rom deleted from the development section? Any clue? It was such an useful rom (using it myself)
And no, the original instruction only said to flash the zip file. Not fastboot the kernel before that. Fastbooting is only necessary I you get boot loops on normal flashing
Sent from my Nexus 10 using Tapatalk HD
zombiegenerator said:
Why was the rom deleted from the development section? Any clue? It was such an useful rom (using it myself)
And no, the original instruction only said to flash the zip file. Not fastboot the kernel before that. Fastbooting is only necessary I you get boot loops on normal flashing
Sent from my Nexus 10 using Tapatalk HD
Click to expand...
Click to collapse
I finally got into recovery mode yesterday (CWM touch), but today when I tried to do it again, only a stock recovery occurred. What happened?? I can't go back into cwm touch recovery
You have not flashed your kernel (boot.img) properly
Sent from my X10i using xda premium
Why was the rom deleted from the development section? Any clue? It was such an useful rom (using it myself)
And no, the original instruction only said to flash the zip file. Not fastboot the kernel before that. Fastbooting is only necessary I you get boot loops on normal flashing
Click to expand...
Click to collapse
I finally got into recovery mode, but when trying to flash the JB rom, it says something about a (Status 7 error) Flash aborted. how did you successfully flash yours?
First, you flash the stock ICS rom of sola. It will create the compatible partitions for JB in sola.
Second, you enter recovery mode and wipe all data, cache.... (maybe flash boot.img is required to entering this mode)
Finally, you install the zip file (rom).
Good luck.
k66473 said:
First, you flash the stock ICS rom of sola. It will create the compatible partitions for JB in sola.
Second, you enter recovery mode and wipe all data, cache.... (maybe flash boot.img is required to entering this mode)
Finally, you install the zip file (rom).
Good luck.
Click to expand...
Click to collapse
I have flashed stock ICS, but even after I wiped/factoy reset, it still says Status 7 error
Maybe you should try to flash the boot.img in the zip file of munjeni before entering recovery mode and wipe all data, cache.
Regards,
k66473 said:
Maybe you should try to flash the boot.img in the zip file of munjeni before entering recovery mode and wipe all data, cache.
Regards,
Click to expand...
Click to collapse
The hash is mismatched, he needs to download the zip file again
Sent from my Nexus 10 using Tapatalk HD
Unable install cwm for my sola
zombiegenerator said:
The hash is mismatched, he needs to download the zip file again
Sent from my Nexus 10 using Tapatalk HD
Click to expand...
Click to collapse
Sir,
I have tried to install cwm for xperia sola .
it locked boot loader
now running .54 stock
rooted
please give me detail steps : how to install cwm recovery ??
or any other manually how i can install the cwm for sola ?
tired of searching in internet from morning today
i have tried with recoverx.zip . it wasnt running on windows 8 it seems
sidrockzz said:
Sir,
I have tried to install cwm for xperia sola .
it locked boot loader
now running .54 stock
rooted
please give me detail steps : how to install cwm recovery ??
or any other manually how i can install the cwm for sola ?
tired of searching in internet from morning today
i have tried with recoverx.zip . it wasnt running on windows 8 it seems
Click to expand...
Click to collapse
First you will need to have root, then you can try one of the following links
http://forum.xda-developers.com/showthread.php?t=2020893&highlight=cwm+recovery
http://forum.xda-developers.com/showthread.php?t=1953584&highlight=cwm+recovery
may I know how to flash boot.img for Xperia Sola?
This is my current issue
http://forum.xda-developers.com/showthread.php?t=2541786
Anyone can assist on it? @@
Thanks a lot
How do you flash boot.img?
k66473 said:
Maybe you should try to flash the boot.img in the zip file of munjeni before entering recovery mode and wipe all data, cache.
Regards,
Click to expand...
Click to collapse
How can one flash boot.img when we can only select .ftf or .sin files in flashmode???
nofear246 said:
How can one flash boot.img when we can only select .ftf or .sin files in flashmode???
Click to expand...
Click to collapse
You flash in fastboot mode, or with recovery, but you must have unlocked bootloader, or it will brick your phone.
Hello! I just rooted my xperia u today and now I'm trying to flash a custom ROM. The problem
is that I keep getting error/status 7 in cwm when trying to do this. I have searched around,
but can't find a solution. Any help appreciated!
Info:
Xperia U ST25i
Stock kernel
Stock ICS 4.0.4
CWM 5
Fixed it by following this:
1) Extract the contents you will get 3 things in it .... boot.img (file) , system(folder) , meta-inf (folder)
2) Leaving the boot.img out repack the other two folders (system,meta-inf)
3) fastboot the boot.img file via fastboot by this command "fast boot flash boot boot.img" without quotes
4) then place the new packed zip file
The one without the boot image
5) try flashing it
6) factory reset and wipe delvik cache and reboot
step 2?
blackjacknapper said:
Fixed it by following this:
1) Extract the contents you will get 3 things in it .... boot.img (file) , system(folder) , meta-inf (folder)
2) Leaving the boot.img out repack the other two folders (system,meta-inf)
3) fastboot the boot.img file via fastboot by this command "fast boot flash boot boot.img" without quotes
4) then place the new packed zip file
The one without the boot image
5) try flashing it
6) factory reset and wipe delvik cache and reboot
Click to expand...
Click to collapse
Hi, i'm what you call a noob and I could really use your help.
Could you explain to me what you mean by step 2 'repacking the other two folders (system,meta-inf)'? And do I put all the files in the fastboot folder?
Thanks a lot!!
blackjacknapper said:
Fixed it by fooowing this:
1) Extract the contents you will get 3 things in it .... boot.img (file) , system(folder) , meta-inf (folder)
2) Leaving the boot.img out repack the other two folders (system,meta-inf)
3) fastboot the boot.img file via fastboot by this command "fast boot flash boot boot.img" without quotes
4) then place the new packed zip file
The one without the boot image
5) try flashing it
6) factory reset and wipe delvik cache and reboot
Click to expand...
Click to collapse
Yeah, u should flash the kernel first
I have..
MT27i said:
Yeah, u should flash the kernel first
Click to expand...
Click to collapse
I flashed the kernel via the cmd promt fastboot flash boot boot.img. The device is rooted and bootloader is unlocked.
But when i reboot the phone into recovery mode it doesn't get the FXP screen it just gets the sony logo.
Then when i try to instal from zip I get status 7. I placed the gapps and cm zip files on the sd card.
What am i doing wrong?
I really appreciate the help:good:
blackjacknapper said:
Hello! I just rooted my xperia u today and now I'm trying to flash a custom ROM. The problem
is that I keep getting error/status 7 in cwm when trying to do this. I have searched around,
but can't find a solution. Any help appreciated!
Info:
Xperia U ST25i
Stock kernel
Stock ICS 4.0.4
CWM 5
Click to expand...
Click to collapse
Watch this video (start watching at 8:05).
youtube.com/watch?v=O52IeX93Jek
In this video, he is showing how to flash cm9, but you can also use other custom roms.
What software are you trying to flash?
@Buddha's belly
Have you flashed the kernel that's in the ROM zip?
And you can look at the log to see what exactly fails.
ChikeD said:
@Buddha's belly
Have you flashed the kernel that's in the ROM zip?
And you can look at the log to see what exactly fails.
Click to expand...
Click to collapse
@ChikeD is rights.
try to flash the kernel from rom zip.
Hello
I was just trying to flash CM10 into my Sola
I unlocked the bootloader
I root it
Installed Recovery ROM
Made backup of current ROM
Wipe/Factory Reset
While flashing in Recovery Mode I got the error 7 message, so the instructions were to do the flash of the rom through flashtool
Flashed the rom through flashtool
After reboot, it's stucked on the initial "FreeXperia" image and it freezes there
I can enter in fastboot and flashmode, but I tried to flash again the "MT27_6.1.1.B.1.54_KERNEL.ftf" firmware, but the only thing that changes is the "FreeXperia" colorful image to the standard "Sony" logo.
What can I do?! How come it doesn't boot?!
Please help.
Do following:
- Shut down your phone
- connect it to your computer in fastboot mode (with volume up hold)
- flash the boot.img which is inside the ROMs .zip
- Do your steps again (enter recovery, wipe etc)
I've flashed the boot.img of CM10 before.
Well, the problem is that I cannot enter recovery mode!
Only fastboot and flashmode
Tom_Joad_XDA said:
I've flashed the boot.img of CM10 before.
Well, the problem is that I cannot enter recovery mode!
Only fastboot and flashmode
Click to expand...
Click to collapse
Try power button insteat volume to enter recovery.
ChikeD said:
Try power button insteat volume to enter recovery.
Click to expand...
Click to collapse
Ok, I could get into recovery mode. I just restored my rom backup (STOCK ICS with root and unlocked bootloader)
I followed all the instructions. Should I repeat the process and expect a different result?!
Tom_Joad_XDA said:
Ok, I could get into recovery mode. I just restored my rom backup (STOCK ICS with root and unlocked bootloader)
I followed all the instructions. Should I repeat the process and expect a different result?!
Click to expand...
Click to collapse
Flash the zip with the recovery in boot.img from the rom not the one you have in stock.
ChikeD said:
Flash the zip with the recovery in boot.img from the rom not the one you have in stock.
Click to expand...
Click to collapse
I have copied the CM10 zip into the phone (cm-10-20140113-UNOFFICIAL-pepper.zip)
Isn't this the rom I should flash in recovery?
Tom_Joad_XDA said:
I have copied the CM10 zip into the phone (cm-10-20140113-UNOFFICIAL-pepper.zip)
Isn't this the rom I should flash in recovery?
Click to expand...
Click to collapse
Yup that's it, but first flash boot.img from the rom with fastboot.
Don't expect the phone to boot because this kernel is not comoatible with stock ROM go strait to recovery, do whatever is needed (factiry rest, clear dalvik and cache etc) as instructed in it's thread, and fash the zip
ChikeD said:
Yup that's it, but first flash boot.img from the rom with fastboot.
Don't expect the phone to boot because this kernel is not comoatible with stock ROM go strait to recovery, do whatever is needed (factiry rest, clear dalvik and cache etc) as instructed in it's thread, and fash the zip
Click to expand...
Click to collapse
So, just to be clear:
I flash boot.img from the CM10 rom with fastboot using Flashtool, right?
Then, in recovery, I flash the CM10 zip file, correct?
Tom_Joad_XDA said:
So, just to be clear:
I flash boot.img from the CM10 rom with fastboot using Flashtool, right?
Then, in recovery, I flash the CM10 zip file, correct?
Click to expand...
Click to collapse
Flashtool(select kernel to flash) or manually : fastboot flash boot boot.img
The enter CWM recovery and follow the instructions on ROM's thread.
ChikeD said:
Flashtool(select kernel to flash) or manually : fastboot flash boot boot.img
The enter CWM recovery and follow the instructions on ROM's thread.
Click to expand...
Click to collapse
Well, I still get the (Status 7) error. I don't know what I'm doing wrong.
My only doubt is if I'm using the correct recovery. How can I know that?
My current recovery is CWM Touch v5.5.0.4 (modified CWM by Munjeni)
Honestly, I'm getting do reallly tired of this.
For 2 days I've been trying to install this ROM and I always get stuck with the /(&)(#$ "status 7" error.
Here is what I do step by step, so someone can point me in the right directions because, quite frankly, I just wan to throw this phone over the window right now...
1. After I get the "status 7" error I restore my rom backup, which brings me to stock ICS with unlocked bootloader and with root
2. I reboot in fastboot mode and, with Flashtool, I flash the boot.img I extracted from the "cm-10-20140113-UNOFFICIAL-pepper.zip"
3. I enter in recovery mode and wipe all the data/cache/delvik cache etc (I've also tried to do this BEFORE flashing the boot.img)
4. Still in recovery, I choose "Install zip from sdcard" and select the "cm-10-20140113-UNOFFICIAL-pepper.zip" (I've also tried to select this file without the boot.img file)
5. I get the status 7 error!!!!!!
Please help, as it is driving me nuts!
Redownload the ROM and try again. I'll give you a step by step instruction now:
- redownload the ROM and push it to your phones storage
- shut down your phone and connect it via fastboot to your computer
- Open the flashtool and flash the boot.img from the rom.zip via fastboot.
- after flashing, disconnect your phone from your computer, then wait some seconds
- Now power on your phone and enter recovery
- now you make a full wipe (wipe data, wipe cache, wipe dalvik cache (advanced), format /system (mounts and storage)
- After the full wipe, try to flash the redownloaded ROM again
What exectly the status 7 is for, look at the log.
It fails right in the first assert line of code. I've also tried to remove the assert line, as suggested somewhere on the forum, but then I get a "Status 6" error. I'll try to re-download the zip file when I get home...
ChikeD said:
What exectly the status 7 is for, look at the log.
Click to expand...
Click to collapse
Tom_Joad_XDA said:
It fails right in the first assert line of code. I've also tried to remove the assert line, as suggested somewhere on the forum, but then I get a "Status 6" error. I'll try to re-download the zip file when I get home...
Click to expand...
Click to collapse
the assert n ro.product.device and ro.build.product? This should not happen with the recovery that comes with the ROM.
Well, that may explain it, as I'm not sure I'm using the correct recovery rom, as I didn't knew there was a recovery on this rom.
The instructions in the thread are:
Make a backup of your current rom
Wipe data/factory reset in recovery
Flash CM10 (If you get error 7 while flashing exctract the boot.img from the rom zip, and flash it via fastboot)
Flash Ultra Slim Gapps
Reboot & Enjoy!
So, I had to find a recovery ROM and that is what I did. So maybe that's the problem: I'm not using the correct recovery rom.
What can I do now to change it?
ChikeD said:
the assert n ro.product.device and ro.build.product? This should not happen with the recovery that comes with the ROM.
Click to expand...
Click to collapse
Tom_Joad_XDA said:
Well, that may explain it, as I'm not sure I'm using the correct recovery rom, as I didn't knew there was a recovery on this rom.
The instructions in the thread are:
Make a backup of your current rom
Wipe data/factory reset in recovery
Flash CM10 (If you get error 7 while flashing exctract the boot.img from the rom zip, and flash it via fastboot)
Flash Ultra Slim Gapps
Reboot & Enjoy!
So, I had to find a recovery ROM and that is what I did. So maybe that's the problem: I'm not using the correct recovery rom.
What can I do now to change it?
Click to expand...
Click to collapse
What recovery ROM, you only need to install thr boot.img from the ROM file.
What ROM are you trying to install(link)?
As stated in this thread, I'm trying to install CM10 (cm-10-20140113-UNOFFICIAL-pepper.zip).
My recovery rom is CWM Touch v5.5.0.4 (modified CWM by Munjeni)
ChikeD said:
What recovery ROM, you only need to install thr boot.img from the ROM file.
What ROM are you trying to install(link)?
Click to expand...
Click to collapse
Tom_Joad_XDA said:
As stated in this thread, I'm trying to install CM10 (cm-10-20140113-UNOFFICIAL-pepper.zip).
My recovery rom is CWM Touch v5.5.0.4 (modified CWM by Munjeni)
Click to expand...
Click to collapse
Was I not clear enough?
Your recovery is probably missing those props and yould fail every time, you must use the recovery of the ROM.by flashint boot.img.
And I have asked a link for the ROM you dounload just to make sure it's props are OK, so I need a link.
If it don't let you post a link try to qrap it with code tags (the # button in thepost editor)
I wiped my device and now can't install CM because it thinks it is castor and not castor_windy. It is a wifi z2 tablet.
I used tool from this thread to gain root. After I used root checker basic to check I was rooted and it said I was.
http://forum.xda-developers.com/showthread.php?t=2784900
I used tool from this thread to install custom recovery, I believe successfully. I was able to reboot into recovery afterwards.
http://forum.xda-developers.com/showthread.php?t=2794175
To try and install CM I tried to follow the instructions in this post.
http://forum.xda-developers.com/showpost.php?p=53994500&postcount=1
To do 4&5 in twrp, I wiped cache, system and dalvik. I got the problem in the following picture (pictures are all links because I couldn't work out how to get them small enough to attach).
https://drive.google.com/file/d/0BxoU7oR5AJUeVnE4LXpEd0t6c0k/edit?usp=sharing
It eventually formatted all three.
I then tried to install CM, PA gapps, and recovery (as suggested in the recovery thread to make sure keep recovery after reboot). This happened.
https://drive.google.com/file/d/0BxoU7oR5AJUeT2pkZE53UUdRUDA/edit?usp=sharing
I didn't make a backup in advance because I am an idiot. I do have TA backed up.
What did I do wrong and how can I fix it please?
If I understand you correctly, you have tried too flash CM without unlocking your bootloader first.
As far as I know, this is not possible: Due to the locked bootloader, the CM Kernel cannot be installed and hence CM won't work anyways.
With locked bootloader, you can only flash stock-based ROMs which share the Kernel with the original ROM.
You can use flastool to flash a TFT (stock firmware), then your tablet should work again.
For flashing a real CM which requires an unlocked bootloader see here: http://forum.xda-developers.com/showthread.php?t=2708194
Bootloader unlocking: http://forum.xda-developers.com/showthread.php?t=2747676
Have fun!
BabelHuber said:
If I understand you correctly, you have tried too flash CM without unlocking your bootloader first.
As far as I know, this is not possible: Due to the locked bootloader, the CM Kernel cannot be installed and hence CM won't work anyways.
With locked bootloader, you can only flash stock-based ROMs which share the Kernel with the original ROM.
You can use flastool to flash a TFT (stock firmware), then your tablet should work again.
For flashing a real CM which requires an unlocked bootloader see here: http://forum.xda-developers.com/showthread.php?t=2708194
Bootloader unlocking: http://forum.xda-developers.com/showthread.php?t=2747676
Have fun!
Click to expand...
Click to collapse
Thank you. You are exactly correct, I didn't unlock the bootloader first.
Would this flashtool work given I am currently in twrp and have no OS? If it would it is showing the links for the ROM for SGP511 and this is 512. Is it the same or do I need a different link for the ROM?
http://xperiafirmware.com/8-firmware/50-sony-xperia-z2-tablet-wi-fi-sgp512
Thanks. Trying to have fun.
spanielhead said:
Thank you. You are exactly correct, I didn't unlock the bootloader first.
Would this flashtool work given I am currently in twrp and have no OS? If it would it is showing the links for the ROM for SGP511 and this is 512. Is it the same or do I need a different link for the ROM?
http://xperiafirmware.com/8-firmware/50-sony-xperia-z2-tablet-wi-fi-sgp512
Thanks. Trying to have fun.
Click to expand...
Click to collapse
Look at developer.sonymobile.com/unlockbootloader
IRRC you need to use fastboot to unlock the device. Afterwards, you can install Cm. If you are lucky you don't need to flash a stock ROM first.
BabelHuber said:
Look at developer.sonymobile.com/unlockbootloader
IRRC you need to use fastboot to unlock the device. Afterwards, you can install Cm. If you are lucky you don't need to flash a stock ROM first.
Click to expand...
Click to collapse
Thank you. Have unlock key from Sony now.
I am currently in recovery. Should I be able to reboot the bootloader from recovery and get into fastboot that way? (Reminder I have no OS.)
spanielhead said:
Thank you. Have unlock key from Sony now.
I am currently in recovery. Should I be able to reboot the bootloader from recovery and get into fastboot that way? (Reminder I have no OS.)
Click to expand...
Click to collapse
OK I tried this and bad things. Before the device was detected by my laptop, now it is not and it hangs at the sony logo and no led. Am I f***ed?
spanielhead said:
OK I tried this and bad things. Before the device was detected by my laptop, now it is not and it hangs at the sony logo and no led. Am I f***ed?
Click to expand...
Click to collapse
I would suggest non Sony software anyway. I still have my bootloader, but since it's not allowed to be unlocked I can't use Sony software either.
spanielhead said:
OK I tried this and bad things. Before the device was detected by my laptop, now it is not and it hangs at the sony logo and no led. Am I f***ed?
Click to expand...
Click to collapse
Not at all :good:
By long-pressing the power button (10 seconds or so) the tablet shuts down
Do the following:
- Get your Sony unlock key
- Install the Android SDK (Software Developers Kit) on your PC
- Install all necessary Xperia drivers (Google is your friend, don't remember where I got mine from)
Using fastboot:
- Connect your tablet to the PC while simultaneously pressing 'Volume up'. When the LED is blue you are in fastboot mode
- Unlock your tablet like described by Sony
- Install CWM from fastboot mode
- Reboot
- Enter recovery (press 'Volume up' when the LED is pink)
Copy files to tablet:
- Use the adb command line tool from Android SDK (in the same folder as fastboot)
Copy CM11 and GAPPs to tablet:
via Windows CMD: adb push filename.zip /sdcard/ROMs/filename.zip
- Flash CM11/ GAPPS via recovery
Done!
BabelHuber said:
Using fastboot:
- Connect your tablet to the PC while simultaneously pressing 'Volume up'. When the LED is blue you are in fastboot mode
- Unlock your tablet like described by Sony
Click to expand...
Click to collapse
Have restored device to stock, then rooted and installed custom recovery (as in original post).
Can't get into fastboot mode. Trying as stated above fails. Screen stays off with blue LED. Same thing happens if I reboot into bootloader via flashify or recovery. fastboot devices then does not detect device. It does for my phone so think that means fastboot works.
I must have missed something (again). Thank you for your patience.
Edit: bootloader now unlocked with flashtool.
Edit 2: Used flashtool to fastboot flash boot.img from M9 snapshot (was this my mistake, not CM10?). Now can only get into fastboot, can't get into recovery. Without recovery I require an img file of the rom, is that correct?
hasenbein1966 said:
I don't understand why you guys are so generous with your time and energy and write at length to help people who are too lazy and too careless to read properly and thus f*** up their devices...
Click to expand...
Click to collapse
I made a mistake, possibly multiple mistakes. I will continue to make mistakes. This forum is for people like me who don't know what they are doing to ask for help. No one has to offer that help. I am greatly appreciative when they do.
spanielhead said:
Can't get into fastboot mode. Trying as stated above fails. Screen stays off with blue LED.
Click to expand...
Click to collapse
When the screen stays off with blue LED, you ARE in fastboot mode!
In case fastboot does not work, you haven't installed the according drivers on your PC.
spanielhead said:
Used flashtool to fastboot flash boot.img from M9 snapshot (was this my mistake, not CM10?). Now can only get into fastboot, can't get into recovery. Without recovery I require an img file of the rom, is that correct?
Click to expand...
Click to collapse
You must have done something wrong - I had no problems whatsoever.
Just try it again:
- Flash CWM as described
- Factory reset, format system, format data, wipe cache, wipe Dalvik cache (format data/media only if the internal SD-card should be wiped, too!)
- Flash the boot.img from the CM11 ZIP-file
- Enter CWM and use the adb push-command to flash CM11/GAPPs
- Install CM11 and GAPPs via recovery
Good luck :good:
BabelHuber said:
When the screen stays off with blue LED, you ARE in fastboot mode!
In case fastboot does not work, you haven't installed the according drivers on your PC.
You must have done something wrong - I had no problems whatsoever.
Just try it again:
- Flash CWM as described
- Factory reset, format system, format data, wipe cache, wipe Dalvik cache (format data/media only if the internal SD-card should be wiped, too!)
- Flash the boot.img from the CM11 ZIP-file
- Enter CWM and use the adb push-command to flash CM11/GAPPs
- Install CM11 and GAPPs via recovery
Good luck :good:
Click to expand...
Click to collapse
Did you ever manage to install cm11?
I have the same error, device thinks is Castor when its a sgp512. I tried both and soft bricked it, got out, rooted it again and still have the same error. I did unlock the bootloader, i am rooted, I know how to go into fastboot, flashmode, cwm, twrp, etc. But CM11 does not work!
Very frustrating.
Any ideas?
anyone?
Edit: Problem was that I wasnt flashing the kernel first as stated here: http://wiki.cyanogenmod.org/w/Install_CM_for_castor_windy
Are you saying you missed this one
fastboot -i 0xfce flash boot boot.img
BabelHuber said:
When the screen stays off with blue LED, you ARE in fastboot mode!
In case fastboot does not work, you haven't installed the according drivers on your PC.
You must have done something wrong - I had no problems whatsoever.
Just try it again:
- Flash CWM as described
- Factory reset, format system, format data, wipe cache, wipe Dalvik cache (format data/media only if the internal SD-card should be wiped, too!)
- Flash the boot.img from the CM11 ZIP-file
- Enter CWM and use the adb push-command to flash CM11/GAPPs
- Install CM11 and GAPPs via recovery
Good luck :good:
Click to expand...
Click to collapse
I finally found some time to do this. Flashed boot.img using fastboot (didn't work using flashtool which I think was the most recent problem), flashed m9 in recovery, downloaded and adb pushed then flashed pa zero day GAPPS in recovery, and all is right with the world.
@BabelHuber how might I buy you a beer or coffee to thank you properly?