Hey...
I was flashing the new "Th Go2 v13.0"......
I flashed the rom.....
But after starting the phone it said "Insert Sim Card & Restart the phone".
(While the simcard was inside the phone properly)
I then did a factory wipe n all...then flashed wolf V7g...
same problem occurred....
Then went back to the Stock Rom.....
But the same thing here 2......
Please help.....
In service menu...
it shows...
[] Network 5
[] Network subset 5
[] Service provider 5
[] Corporate 5
[] SIM 0
Is my X10 bricked or is it sim lock...???
please please help...
Thanks in advance......
ddddanger said:
Is my X10 bricked or is it sim lock...???
Click to expand...
Click to collapse
Test with another sim-card
did that 2.....
same problem...
no network...
plez help dude...
Related
Was just luking into the new rom i flashed (Wolfbreak v6)
But by mistake i seted a code on my x10...
(X10 --> Settings --> Location & Security --> Set up SIM card lock --> Lock SIM card)
I thought it was the Pin request on startup.....
But wass something else.... :'(
I turned off ma cell...
tryed many things....
Its telling "Unable to change Lock SIM card status.....
Please Please Help......
Roming without calls / texts for more than a week now......
do u know the PIN and where exactly do u get this error !!
the error appears when i try to uncheck the Lock sim card option....
Unfortunately donno the pin.....
Itryed flashing different roms too.....
Plez help...
Try flashing the original firmware of se thru flashtool or try repairing ur phone thru seus ...or if u havent changed ur pin then try entering 0000 as password ..have u tried entering pin before even once if not then try the pin I gve..else the other methods ..
Hope it helps
Plz thank if it did
Sent from my X10i using XDA App
Dude thanks for ur support......
But,
I tryed Flashing the original SE rom through Update Service....
N also flashed Wolf.....
but of no use....
M stuck....
U got ne other way plez...????
ddddanger said:
Was just luking into the new rom i flashed (Wolfbreak v6)
But by mistake i seted a code on my x10...
(X10 --> Settings --> Location & Security --> Set up SIM card lock --> Lock SIM card)
I thought it was the Pin request on startup.....
But wass something else.... :'(
I turned off ma cell...
tryed many things....
Its telling "Unable to change Lock SIM card status.....
Please Please Help......
Roming without calls / texts for more than a week now......
Click to expand...
Click to collapse
I think you should contact your SIM card provider (telephone company) and ask for the unlock code (PUK) which is linked to your SIM card subscription and how to use the code to unlock.
Yes u need PUK code from sim card provider
Sent from my X10i using xda premium
I appreciate u all......
But its not about PUK code.....
Its that the phone isn't allowing any sim to connect to the network.....
the phone is blocked to the network......
Please cheak it out in X10 --> Settings --> Location & Security --> Set up SIM card lock --> Lock SIM card....
Its is in any x10 with any 2.3.3 rom.....
B careful..... dont block ur x10, like me..... :'(
I tryed other sims too.....
Plez help......
i think to unlock it u need to try entering Pin .. so did u try entering Pin ??? how many times u tried ??
did u try putting ur Sim Card in someone elses phone and see whats it showing ??
acerulz said:
i think to unlock it u need to try entering Pin .. so did u try entering Pin ??? how many times u tried ??
did u try putting ur Sim Card in someone elses phone and see whats it showing ??
Click to expand...
Click to collapse
tryed nearly 700 different pins.......no use....
the sim is working in another cell phone........
Sim is being detected by the x10....but isn't allowed to connect to a network.....
Ne other way out...???
Can u mke calls from ur sim using another phone...and does other sim works in urs
Sent from my X10i using XDA App
I can use that sim from another cell........
not a single sim is having network on my x10.....
anything more useful fokes....?????
did u try repairing it or tried flashing some new and different firmware from what u using on top of it !! so it asks for what when u uncheck option ??
acerulz said:
did u try repairing it or tried flashing some new and different firmware from what u using on top of it !! so it asks for what when u uncheck option ??
Click to expand...
Click to collapse
I Flashed 1.6, 2.1 and wolfbreakv6 2.3.3
but no use.......
Has my x10 got locked.......
have you tried a full wipe in xrecovery? try and clear everything?
kenectd said:
have you tried a full wipe in xrecovery? try and clear everything?
Click to expand...
Click to collapse
tryed that 2.....
When the first time the it requested the pin of my SIM CARD and after i wrote this puk, then the new pin, the phone started, then it sayed no service at my status bar.I cant go anyware,with sim on the phone,if i switch on the phone, the OS work, i can go to settings i can do anything like a normal cell....
only, i cant sms, call, internet, or nething related to network, coz of network block
(The new pin i entered dosent open the network block)
Can neone help me?
Sorry for my bad english ....Please help me.
Thanks
Would the following help?
Credit to wikiAnswer (TuRtLeHeRmIt and Applechunk)
A SIM card is locked by 2 or 4 passwords
PIN1
PIN2
PUK1
PUK2
PIN1 and PIN2 are programmable by the end user the code is 4-8 digits long usually you have 3 attempts to get the code right, if you lock PIN1 or PIN2 out you then need the PUK1 or PUK2 which is the PIN UNLOCK KEY which is an 8 digit code provided by your Service Provider get this code wrong 10 times and its time to buy a new SIM card
Well this depends on what kind of "lock" you mean. A SIM card can be password protected (usually 3-6 characters long) by going into the Security Settings on your phone which is usually where you can chgange your phone's lock as well if it has one.....if you enable a SIM password this password is saved onto the SIM card itself which is a good security issue because if somebody steals your SIM card they can't just simply put it in a new phone and be ready to go....they'd have to know your SIM password in order to even get the phone to fully load up and connect to the network. Another thing that can be done is a SIM card can be locked due to someone putting in a wrong password too many times....if you ever get to this screen on a cell phone call customer care because if you try too many times you will fry your SIM card which would mean you have to shell out another $20 or so.....if that doesn't sound like what you meant than to my knowledge the answer is no but otherwise I hope this helps
So according to this......
the password is stuck in my x10....
which i cannot erase, or change......
coz my sim is working on other cells.......
so, wat should i do now...???
Plez Got no proper solution till now.....
M restless without my x10.....
Hi,
Title says it all.. Flashed Illusion-xT Rom and was working for couple of days now, without any problems.. This morning I made a call, phone rebooted suddenly and it isn't asking my "pin-code" anymore.. I can search for networks, but it won't connect 2 it.. Status menu says this:
Network : unknow
Signal : -75dbm
Service : Out of service
Status : Disconnected
IMEI : is correct
Baseband : I9100XXKL1
Tried flashing another kernel (Void-echo, Illusion-xTreme,..)
Did full wipe, and flashed rom again.. Still the same problem..
Anybody has an idea how I can fix this?
thx!
Clean replace sim card first .
Fing about with kernels wont help .
Flash stock full firmware change modem might help .
jje
Have you tried it with another device yet? It could be the sim and not the phone. My mom has a flipout and her Sim stopped working. Changed the sim and it works fine now.
Sent from my GT-I9100
Sim card is working in my Xperia X10..
Flashing back 2 stock did the trick! thx!
Now flashing back to custom and hope the problem doesn't come back!
I have bought a new Xperia Ray ST18a from Telus (Canada). I have successfully unlocked it using a code, called my voice mail without a problem. Then I downloaded Sony's PC companion to verify if the phone's software was up to date. When the update was finish, I tried to make another call and noticed the "Emergency Calls only. No Sim Card" message.
I used the Sim card in my old phone and it worked. I used another Sim card in my Ray, the 'No Sim card Message' was still there.
I sent the phone to Sony for repair and came back with again the same problem.
Anybody have a clue what is wrong with the phone?
The SIM lock Menu it shows:
[x Network 10
]
[] Network subset 0
[] Service provider 0
[] Corporate 0
[] SIM 0
Phone software version: 1248-9545_4.0.1.A.0.283 Generic -user
File System Version: Telus_4.0.1.A.0.283
S1 Boot version: 1241-3656-R9A029
ETS software Version: 1247-1301_7
Rooting Status: Bootloader Unlock Allowed: No
It's locked again
They have network locked your phone again. As for the SIM problem, maybe the phone/SIM contacts aren't clean enough. I don't think it's related to the network lock/unlock.
aristone said:
They have network locked your phone again. As for the SIM problem, maybe the phone/SIM contacts aren't clean enough. I don't think it's related to the network lock/unlock.
Click to expand...
Click to collapse
Thanks for the reply.
I have checked the contacts and even applied pressure on them when the phone was restarting. Same results.
How can you tell it's network locked again?
With which code did you unlock?
Does any other SIM card work?
According to the Network value, seems like the SIM-lock is still there...Is the phone branded?
Someguyfromhell said:
With which code did you unlock?
Does any other SIM card work?
According to the Network value, seems like the SIM-lock is still there...Is the phone branded?
Click to expand...
Click to collapse
Yes it's a branded phone.
I tried another SIM card from another cell phone and I'm still having the same message.
I bought an unlock code from a unlocking service from the internet.
Learned something yesterday!
Not all cell phones can prevent the insertion of the SIM card the wrong way!
On the Ray you can insert the card the wrong way and you will be able to install the battery and cover perfectly. I have re-inserted the SIM card in the right position and the "No SIM card" message disappeared and was able to unlock it with the same previous code. All is now fine.
I don't mind looking like a foul and hope this thread will help somebody else.
Thank you for trying to help.
misterhoney said:
Learned something yesterday!
Not all cell phones can prevent the insertion of the SIM card the wrong way!
On the Ray you can insert the card the wrong way and you will be able to install the battery and cover perfectly. I have re-inserted the SIM card in the right position and the "No SIM card" message disappeared and was able to unlock it with the same previous code. All is now fine.
I don't mind looking like a foul and hope this thread will help somebody else.
Thank you for trying to help.
Click to expand...
Click to collapse
You inserted the SIM card in the wrong position? How is that even possible?
Someguyfromhell said:
You inserted the SIM card in the wrong position? How is that even possible?
Click to expand...
Click to collapse
Believe it or not
I flashed back to stock at&t ics and modem but the sim card still can't be read. I know the sim works because it works fine in my galaxy nexus.
I have tried flashing all 5 versions of the ICS AT&T modems on the stock rom and I tried flashing "[ROM][MOD] ICS IMM76D UCLF6 - Stock, Rooted, Deodexed + FJ-Mod 7/27/12 *UPDATED*"
But I still get the error of no sim.
In the settings I see the baseband I717UCLF6, Kernel version 3.0.8, Android version 4.0.3, IMEI is fine.
Mobile network type - unknown, service state - out of service, mobile network state - disconnected.
When I go to "Wireless and Networks" and click mobile networks, it says "insert sim card to access network services"
Please help with some ideas on what to do..
Remove the sim card ....wipe all areas of the device ....
Reflash the rom again ....and insert the card ...
You should get restored service ...
If not .....post here again for round 2.....g
gregsarg said:
Remove the sim card ....wipe all areas of the device ....
Reflash the rom again ....and insert the card ...
You should get restored service ...
If not .....post here again for round 2.....g
Click to expand...
Click to collapse
YES!! did this 3 times and it worked! :laugh::laugh::good::good:
cyi1 said:
YES!! did this 3 times and it worked! :laugh::laugh::good::good:
Click to expand...
Click to collapse
Awesome !!!
Good work , and welcome back to the network ....
Could you put the word "solved " in your thread title ??
It helps other users find the correct threads ,and keeps the forum clean.
Thanks !!.....g
i have sony xperia tipo dual sim phone and in this phone have a 1 problem that dual sim option is not click able and i try to put only sim 1 ......phone work great and if put only sim 2 ,,,,,, phone work good but when both sim is available in the phone the sim 2 option is not showing
well i try many time to flashing with flashtool but no success and diffrent firmware also but no success after that i try to update with sony update
service and phone is update very well but the sim 2 is not work i think may be this situation is creat by me using this code *#*#7378423#*#*
MY SONY TIPO DUAL ST21I2 SHOWS THIS
[X] NETWORK 0
[X] NETWORK SUBNET 0
[X] SERVICE PROVIDER 0
[X] CORPORATE 0
[X] SIM 0
this phone is working nicely since 1 year but this is accidentally lock and i confused with this problem please help me