Related
Afraid of kdz updater , here is an alternative to flash rom and recovery
Note: Donot use this method from emergency mode unless you already have a backup of your nv
Note: using this prodcedure there should be no disconnection of phone or power cut.
Using this method you can flash "stock rom + custom recovery" or "stock rom + stock recovery"
DO THIS ON YOUR OWN RISK, I WILL HAVE NO LIABILITY IF YOU BRICK YOUR PHONE !!!
download lgmdp : Download Here
1. disable lg modem
( in right click mycomputer->manage->device manager->modems->right click on lg modem disable it)
2. now connect your phone to pc.
3. start lgdmp
4. click "select port"
Phone will be automatically detected press "connect"
(close the pop up window of image select generally you will get it on connect of lgmdp)
5. backup nv for safety (tools->nv backup)
6. After backup , store this nv file somewhere in computer (and remember where you stored lol..)
7. close lgmdp
Now download stockrom+customrecovery
Download v10e ROM(unrooted)(2.2.2) with cwm recovery: Download Here_v10e
(or)
Download v20c ROM(unrooted)(2.3.3) with cwm recovery: Download Here_v20c
Step 1. Extract (use "extract here" for a noob)the downloaded file stockrom+customrecovery
(be sure you have extracted without error in zip extraction and you have all 13 files in extracted folder)
To flash stock rom + custom recovery skip step 2 and follow from step 3 to step 7.
To flash stock rom + stock recovery follow from step 2 to step 7 (including step 3).
Now the extracted folder has stock rom + custom recovery.
Step 2:
2. (a) Download stock_recovery for v10e: Download Here_recovery_v10e
(or) Download stock_recovery for v20c: Download Here_recovery_v20c
(make sure you downloaded correct recovery according to Rom you downloaded)
2. (b) extract the downloaded zip file -> you get recovery.img (this is stock recovery)
2. (c) Now copy this recovery.img file and paste in folder of "stockrom+customrecovery" (which you extracted previously in Step 1) {as their is already a recover.img file in folder it will be copy and replace "for noobs", in this step you replace custom recovery with stock recovery}
Click to expand...
Click to collapse
Step 3: start lgdmp
Step 4. click "select port"
Phone will be automatically detected press "connect"
Step 5. select the extracted folder "stockrom+custom recovery" as "image folder or image select" in lgmdp
Step 6. Select "Erase EFS APPS" in drop down box of "NVBackup/Restore"
(Caution : donot select other options they might stuck your phone in air plane mode with no gsm )
Step 7. press start or download
DONOT DISCONNECT YOUR MOBILE UNTILL IT SHOWS DOWNLOAD COMPLETE AT BOTTOM
it shows in middle trying to connect to phone etc. donot touch the phone it will be automatically connect everytime.
After download complete you are done with procedure.
----------------------------------------------------------------------------------------------------------------------------------------------------------
If you want to flash any other stock rom (kdz) file from lgmdp (Check this url)
----------------------------------------------------------------------------------------------------------------------------------------------------------
Note : Creating nv with different imei is illegal.
For people who messed up with nv, lost their nv follow http://forum.xda-developers.com/showthread.php?t=534704 to create nv.
----------------------------------------------------------------------------------------------------------------------------------------------
NV will be automatically restored at the end before you see download complete.
If any error occured while restore of nv
follow below steps to restore nv
put the nv file which you backed up in first part of procedure in this order*
create new folder
- rename folder: <your_imei_(on_which_nv2_is_created)>
- create new folder in <your_imei_(on_which_nv2_is_created)>
named <port no.> on which your phone is connected
(ex:for com4 name folder as " _COM_4_" (without quotes), you can find
port number when you click on "select port" when connecting mobile to
lgmdp under port column.)
- now place nv2 file in this folder <port no.>
- so now u r nv2 file is in
" \<your_imei_(on_which_nv2_is_created)>\<port no.>\ "
- now place lgmdp.exe and <your_imei_(on_which_nv2_is_created)> in
new folder
- start lgmdp
- "select port"
- "connect"
- press "NV Restore"
----------------------------------------------------------------------------------------------------------------------------------------------
Thank yoooou!
I cannot express my thanks to you enough. I have been trying to fix my phone for 9 hours now, and every fix I tried didn't work at all. Then I come around to this post thinking "What have I got to lose?" and this is the ONLY fix that WORKED! I still have a thing here or there to figure out for my phone, but I have most functionality back!! Thank you, thank you, thank you!
Dear Mak,
I did everything as stated (step 1 and 3). Everything went smoothly and after i saw the message "download completed" I quit the lgdmp and switched on my phone. the problem is that it is stuck at the "android screen" and does not do anything else. its just continously showing the flashing android logo. Please help! Thanks in advance!
zealous131 said:
Dear Mak,
I did everything as stated (step 1 and 3). Everything went smoothly and after i saw the message "download completed" I quit the lgdmp and switched on my phone. the problem is that it is stuck at the "android screen" and does not do anything else. its just continously showing the flashing android logo. Please help! Thanks in advance!
Click to expand...
Click to collapse
Donot worry your phone is not bricked, It takes time for first boot sometimes may be around 10 min or so.
Which recovery wer u using ?
custom (skiped step 2) or stock (followed step 2) ?,
if you flashed custom recovery boot into recovery (long press {home+volume down+power} buttons simultaneously) and do "wipe data/factory reset" then "reboot system" ?
Do you have stored that nv file mentioned in first part of procedure ?
If stuck at logo screen, remove battery and start as mak said, (long press {home+volume down+power} buttons .
Worked for me !
My question now is... can i safely update to 2.3.3 romania firmware through the official LG mobile update tool ?
Thanks
gabi1 said:
If stuck at logo screen, remove battery and start as mak said, (long press {home+volume down+power} buttons .
Worked for me !
My question now is... can i safely update to 2.3.3 romania firmware through the official LG mobile update tool ?
Thanks
Click to expand...
Click to collapse
Yes i think you should be able to update. (unless you rooted rom)
worked worked worked ... aaaand worked !
Thanks alot, it's just like it was
I owe you a beer mate
Thanks a lot Mak! Your advice worked and phone is now booting. Howver, theres a small catch though. My phone was locked to orange and I thought it would be unlocked after doing sotck rom+custom recovery. I did follow all the steps for step 1 and step 3, but now when Im inserting other sim, it still shows that the phone is network locked. Can you suggest me what to do now? I just want to unlock it and dont know what to do.
Thanks once again, you are a hero!
zealous131 said:
Thanks a lot Mak! Your advice worked and phone is now booting. Howver, theres a small catch though. My phone was locked to orange and I thought it would be unlocked after doing sotck rom+custom recovery. I did follow all the steps for step 1 and step 3, but now when Im inserting other sim, it still shows that the phone is network locked. Can you suggest me what to do now? I just want to unlock it and dont know what to do.
Thanks once again, you are a hero!
Click to expand...
Click to collapse
Sorry No idea how to unlock phones, because here in my location most phones provided by lg or any other brand are unlocked from factory itself, so never been in such situation.
Why dont you Post your query in a new thread in general section , may be you will get some help.
zealous131 said:
I just want to unlock it and dont know what to do.
Click to expand...
Click to collapse
Let me save you some time: you won't find such information here. Not because it's forbidden or illegal, but simply because it can't be done at software level.
What you need is to find an online service that unlocks your phone via some code they will provide based on your IMEI. There's no way you will find such service for free - if you do, please drop me a message with a link - but at least it will be a hell of a lot cheaper than asking your provider to do it.
Thanks Mak, I had to pay £10 to get the unlock code for my phone. Its working like a charm! Thank you all! You guys are saviours!
---------- Post added at 03:53 PM ---------- Previous post was at 03:46 PM ----------
masteryx said:
Let me save you some time: you won't find such information here. Not because it's forbidden or illegal, but simply because it can't be done at software level.
What you need is to find an online service that unlocks your phone via some code they will provide based on your IMEI. There's no way you will find such service for free - if you do, please drop me a message with a link - but at least it will be a hell of a lot cheaper than asking your provider to do it.
Click to expand...
Click to collapse
Thanks for the advice! I found one service and got the code is 10 minutes after paying through paypal. Google unlockthatphone and you will get the link. I cant post weblinks as per forum rules being a new user. The service was great and saved me a fortune.
is there anyway just use lgmdp flash custom recovery ??
coz i already using stock rom v10g(2.2.2 for my country)
coz gingerbread will get stuck on bootscreen last time =_=
just curious to know, because last time i use rom manager flash CWM recovery my phone boot in fastboot after choose reboot into CWM recovery
XeactorZ said:
is there anyway just use lgmdp flash custom recovery ??
coz i already using stock rom v10g(2.2.2 for my country)
coz gingerbread will get stuck on bootscreen last time =_=
just curious to know, because last time i use rom manager flash CWM recovery my phone boot in fastboot after choose reboot into CWM recovery
Click to expand...
Click to collapse
Yes, you can flash custom recovery using lgmdp (this can be used in emergency mode also)
follow http://forum.xda-developers.com/showthread.php?t=1318750
Hi guys, I just got the 2.3.3 gingerbread rom and have successfully upgraded to it using the same lgdmp. Let me know if anyone is interested in that. I dont know how to post files here.
mak.3736 said:
Yes, you can flash custom recovery using lgmdp (this can be used in emergency mode also)
follow http://forum.xda-developers.com/showthread.php?t=1318750
Click to expand...
Click to collapse
well thanks
but can i replace the CWM with below link version ???
http://www.megaupload.com/?d=QBMUI2WX
which is the latest CWM recovery version
XeactorZ said:
well thanks
but can i replace the CWM with below link version ???
http://www.megaupload.com/?d=QBMUI2WX
which is the latest CWM recovery version
Click to expand...
Click to collapse
Yes you can replace the recovery.
Just replace the recovery.img file, and keep the partition.mbn as it is and flash by same steps as mentioned in this thread.
Is the v10e provided for download an Indian froyo version
Bit Confused....
I think u have made a mistake in labelling the section. At the bottom, where you have titled "To back up nv follow below steps". Isn't that part suppose to be the restoring part? And the top part is the backup part. Am I right or am I just confused?
sweettaniyaa said:
I think u have made a mistake in labelling the section. At the bottom, where you have titled "To back up nv follow below steps". Isn't that part suppose to be the restoring part? And the top part is the backup part. Am I right or am I just confused?
Click to expand...
Click to collapse
Thanks for pointing out that, you are right , now i corrected it.
shrewdgeek said:
Is the v10e provided for download an Indian froyo version
Click to expand...
Click to collapse
yes its indian froyo if you want to flash any other version follow http://forum.xda-developers.com/showthread.php?p=19006040#post19006040
hello to all...i am new to this developing. i have a rom file in .zip format....inside it there is system folder. i want to convert this .zip into a system img file. is it possible?? actually i hav a phone on which sdcard is not getting detected. so cwm recovery wont work, niether adb is detecting that device, so i want to make a system img file from this rom so that i can flash it using fastboot. Plz help me
niranjand147 said:
hello to all...i am new to this developing. i have a rom file in .zip format....inside it there is system folder. i want to convert this .zip into a system img file. is it possible?? actually i hav a phone on which sdcard is not getting detected. so cwm recovery wont work, niether adb is detecting that device, so i want to make a system img file from this rom so that i can flash it using fastboot. Plz help me
Click to expand...
Click to collapse
For future reference, at the very least, state the device you have and or are having problems with. Makes things easier for people like me
What your asking for doesn't exist to my knowledge. However, you can extract the contents of the zip to your hard disk and use fastboot to flash the file "boot.img' which should be in the root of the zip you have. Everything else needs to be pushed via ADB to the /system partition. If your CWM is built correctly, ADB should detect your device when connected. That's assuming that you have your drivers installed already.
In reality, I don't think that what you are wanting to do can be done, however I don't know everything either. :silly: Best of luck
bill.weckel said:
For future reference, at the very least, state the device you have and or are having problems with. Makes things easier for people like me
What your asking for doesn't exist to my knowledge. However, you can extract the contents of the zip to your hard disk and use fastboot to flash the file "boot.img' which should be in the root of the zip you have. Everything else needs to be pushed via ADB to the /system partition. If your CWM is built correctly, ADB should detect your device when connected. That's assuming that you have your drivers installed already.
In reality, I don't think that what you are wanting to do can be done, however I don't know everything either. :silly: Best of luck
Click to expand...
Click to collapse
i am trying it for huawei u8180
shinobisoft said:
For future reference, at the very least, state the device you have and or are having problems with. Makes things easier for people like me
What your asking for doesn't exist to my knowledge. However, you can extract the contents of the zip to your hard disk and use fastboot to flash the file "boot.img' which should be in the root of the zip you have. Everything else needs to be pushed via ADB to the /system partition. If your CWM is built correctly, ADB should detect your device when connected. That's assuming that you have your drivers installed already.
In reality, I don't think that what you are wanting to do can be done, however I don't know everything either. :silly: Best of luck
Click to expand...
Click to collapse
I tried this using Livesuit 1.11 for a softwinerEvb a13 tablet (no other known device specs) and it said the image file was invalid. Situation is I soft bricked my tablet by flashing the wrong cwm zip. Finally found out how to connect via Livesuit (kinda like fastboot or bootloader mode or something? like Odin?) to flash stuff to it. I decided to use an erase img .img because where I found how to connect it suggested that to the OP (on techknow). So now instead of the tablet just being stuck on the first screen when trying to boot (normal or recovery), it doesn't do anything at all since there's no boot.img. Which I'm not worried about since It connects to my laptop just fine via livesuit still so I can get a boot on it (ADB won't detect it - pretty positive it's not ADB user error [I run cmd "adb root" when the tablet is connect in whatever mode its in - the way livesuit detects it - and adb says no device found]. BUT I can't find a stock firmware/rom/boot.img for it anywhere (mainly since there's a bunch of clones of this tablet). I'm downloading a few roms (in boot.img format? - .7z files) that I found for "this" tablet (meaning the devs don't know which clones which roms work on lol).
ANYWAY haha, my question is, is there a way to do what you said in the above quote that will work in my situation? I'm not advanced enough to know why livesuit says the image is invalid. I tried it with a cm10.1 zip made for this tablet and a cwm zip made for this tablet (for both I extracted the files and then tried flashing the boot.img I found in the directory(extracted folder right?) via livesuit. livesuit said image file invalid for both .img's.
Please help me and THANK YOU in advance.
I'm open to anyone's help and any help is much appreciated! Thanks buttons will be pressed!!!
Same situation
Same Situation but I know the Specs,, It is allwinner A10 .and Stuck in the soft brick
could you solved this problem? i need a help too, the same problem
---------- Post added at 09:21 PM ---------- Previous post was at 09:13 PM ----------
vennkis said:
Same Situation but I know the Specs,, It is allwinner A10 .and Stuck in the soft brick
Click to expand...
Click to collapse
Hi, could you solved that?
i have a Chinese tablet a10, i have repaired different tablets and android phone trough ADB, but this devices is not detected, i have download some software to help me download the tablet drivers, but hasn't possible that.
finally the only source i have, is charge the firmware again, i use phoenix , and i have some rooms in zip format, what can i do for convert to IMG format?
Hello everyone
Finally what can we do?
How to convert .ZIP to .IMG ?
how to convert?
m.morcielago said:
Hello everyone
Finally what can we do?
How to convert .ZIP to .IMG ?
Click to expand...
Click to collapse
m.morcielago said:
Hello everyone
Finally what can we do?
How to convert .ZIP to .IMG ?
Click to expand...
Click to collapse
hahaha...no answer....i am still waiting for this software
doelwit.sunny said:
hahaha...no answer....i am still waiting for this software
Click to expand...
Click to collapse
You know just converting is not enough
I can convert it
But you need "partition table" for making .IMG
So we don't have it
check sdat2img and imgpatchtools
I was going to flash CM 11 today and kept getting this error code" no recoveries found for your device".in twrp!....Anthing i try to flash through twrp fails..could the recovery image itself been corrupted? .. I guess twrp wont recognise my device type ,iTried uninstall re installing twrp a half dozen times but to no avail. tried using search but didnt find anything defininitve,im sure some one has ran across this before ,but its a new one to me ,twrp has always run flawless for me .. any ideas anyone?
Get a fresh copy here http://techerrata.com/browse/twrp2/jewel
After flashing twrp type fastboot erase cache
heliguide62 said:
I was going to flash CM 11 today and kept getting this error code" no recoveries found for your device".in twrp!....Anthing i try to flash through twrp fails..could the recovery image itself been corrupted? .. I guess twrp wont recognise my device type ,iTried uninstall re installing twrp a half dozen times but to no avail. tried using search but didnt find anything defininitve,im sure some one has ran across this before ,but its a new one to me ,twrp has always run flawless for me .. any ideas anyone?
Click to expand...
Click to collapse
Did you use the version of TWRP posted in the OP of the CM11 thread? You have to use it, otherwise the flash will fail.
Sent from my HTC EVO 4G LTE
FinZ28 said:
Did you use the version of TWRP posted in the OP of the CM11 thread? You have to use it, otherwise the flash will fail.
Sent from my HTC EVO 4G LTE
Click to expand...
Click to collapse
^This.
I also compiled a version with the updated kernel: http://tinyurl.com/TWRP-Recovery-2-6-3-0-selinux
Essentially the same as deck's, just the font in recovery appears much larger and more readable .
Thanks for the help guys!... but im still not getting it ..twp must be really messed up for me .. i downloaded both versions of twrp ..captain t/backs and the one from topic .. and i cant find either or them in "install" mode of twrp.,however i CAN find them in file manager mode,which is baffling, but when i try to move them to some place flashable they are nowhere to be seen!..i also can see them in ES file explorer and tried to move them that way but same result...maybe my download path is incorrect?..this one has me stumped.. anyone have any advice?
heliguide62 said:
Thanks for the help guys!... but im still not getting it ..twp must be really messed up for me .. i downloaded both versions of twrp ..captain t/backs and the one from topic .. and i cant find either or them in "install" mode of twrp.,however i CAN find them in file manager mode,which is baffling, but when i try to move them to some place flashable they are nowhere to be seen!..i also can see them in ES file explorer and tried to move them that way but same result...maybe my download path is incorrect?..this one has me stumped.. anyone have any advice?
Click to expand...
Click to collapse
You have to flash the image files via fastboot, not through recovery.
no wonder i couldnt do it ..lol..havnt to used fast boot since the og evo days hope i can remember how..
Connect the phone to your pc and boot into bootloader, then go to fastboot.
you can test if your comp sees your phone by using
Code:
fastboot devices
Then, just open up cmd wherever your recovery image is stored (if on pc) by holding shift and right clicking. Then in the code below, replace recovery.img with the name of the recovery file you have.
Code:
fastboot flash recovery recovery.img
sorry if im turning this thread into a fastboot tutorial.. but i have the phone in usb fast boot .. downloaded sdk again and when i type in cmd Fast boot .. i get " not recognized as internal or Internal command".. so its not recognizing phone?
heliguide62 said:
sorry if im turning this thread into a fastboot tutorial.. but i have the phone in usb fast boot .. downloaded sdk again and when i type in cmd Fast boot .. i get " not recognized as internal or Internal command".. so its not recognizing phone?
Click to expand...
Click to collapse
Open the cmd from the platform tools folder
ok so downloaded sdk manager .. and maybe i didn't download the right version or something, but nothing will "open up" in sdk .. perhaps i need some drivers or something?.. cause it shows everything is installed .. tools, platform ect .. what i downloaded dosnt look like anything ive seen looking around the web.
heliguide62 said:
ok so downloaded sdk manager .. and maybe i didn't download the right version or something, but nothing will "open up" in sdk .. perhaps i need some drivers or something?.. cause it shows everything is installed .. tools, platform ect .. what i downloaded dosnt look like anything ive seen looking around the web.
Click to expand...
Click to collapse
This is what I use http://developer.android.com/sdk/index.html
You can also download the version that's included in my Hboot guide (top link in my sig). It's not the entire SDK-just ADB & Fastboot. It's what I use. Just download and install. Once installed, highlight the file & hit Shift+right click on mouse, and you're ready to go.
Sent from my HTC EVO 4G LTE
Hey..
Before asking for help let me tell you the whole story 1st, my device was working like charm..
It was Rooted ( i followed this instruction to get Root access ), having PhilZ recovery ( got this from here )..
I removed bloatwares and unwanted apps etc, made some tweaks using Xposed and some directly, replaced bootanimation still device was working fine after this I export it as Custom ROM.
Problem comes here when I was restoring Custom ROM i got Bootloop ( stuck on 1st LG logo ), I guess I forgot to Wipe Dalvik Cache..
I tried following solutions:
- Boot in to Recovery Mode, tried almost every combination but no to avail.
- Flash Stock Firmware but there is no flash files available on internet.
There is a guy on lgbbs.com who have .kdz ( link for f430l's .kdz ) it's paid content, I have not Paypal or any other source to buy.
- Tried in local market but there is no one who can help me.
- Now I want to get into Recovery Mode using ADB but I am facing following problem.
Please check out the attached pictures, hope so you'll get the point (remember device is in bootloop position).
Install PDANET for windows
Get into philz recovery
connect the phone to pc
rename the rom to ROM.zip
copy to adb folder
now put the following command
adb push ROM.zip /sdcard/ROM.zip
Now install from internal sdcard
hit thanx if i helped you
I found this
http://main.develoid.com:81/lg/
LGF430LAT-00-V10a-LGU-KR-AUG-16-2014+0.tot
Is the file you would want. Tots are another form of LG stock software. You'd need the LG Flashtool for it. Might need to find a dll file for it, if it's not included in the zip. I have no way to test if it's the correct file, but is free to download and most people wouldn't go through all the trouble to upload 2 GB files if it wasn't a working one. Good luck.
hafizadv said:
Install PDANET for windows
Get into philz recovery
connect the phone to pc
rename the rom to ROM.zip
copy to adb folder
now put the following command
adb push ROM.zip /sdcard/ROM.zip
Now install from internal sdcard
hit thanx if i helped you
Click to expand...
Click to collapse
Thanks alot.. PDANET doesn't work for me, anyway now Allhmdullilah my device is back into work..
es0tericcha0s said:
I found this
http://main.develoid.com:81/lg/
LGF430LAT-00-V10a-LGU-KR-AUG-16-2014+0.tot
Is the file you would want. Tots are another form of LG stock software. You'd need the LG Flashtool for it. Might need to find a dll file for it, if it's not included in the zip. I have no way to test if it's the correct file, but is free to download and most people wouldn't go through all the trouble to upload 2 GB files if it wasn't a working one. Good luck.
Click to expand...
Click to collapse
Bundle of Thanks.. I really need this one too.. because I can't stop myself to mess with my device, it will help me next time..
Some One Got DLL For F430L?
Thanks Anticipation
shoaibrao said:
Some One Got DLL For F430L?
Thanks Anticipation
Click to expand...
Click to collapse
Does the device have download mode? Try by tuning it off, holding both volume buttons and then plugging the usb cable. If yes, download lg mobile support tool and try from there.
TheFagulousFag said:
Does the device have download mode? Try by tuning it off, holding both volume buttons and then plugging the usb cable. If yes, download lg mobile support tool and try from there.
Click to expand...
Click to collapse
Sir Its Alive Hang On Logo
Can Some One Help Me For KDZ Or TOT+DLL
Thanks Anticipation
shoaibrao said:
Sir Its Alive Hang On Logo
Can Some One Help Me For KDZ Or TOT+DLL
Thanks Anticipation
Click to expand...
Click to collapse
here's the .kdz
https://drive.google.com/file/d/0BxBs2ZTyHoQ1UWdIUl80b25PeUE/view?pref=2&pli=1
password: lgviet.com
Hello all,
First of all the story.
I used the script to rebrand, it has a fail but the phone still working.
One evening, i decided to wipe all by twrp and re run the unbrand script..... that was a huge error, the phone boot but boot loop, and after, the script stuck an no recognise the twrp on the phone.
Tried lot of things like flashing recovery etc in fastboot but nothing else happen than a boot and a black screen with nav bar only.
At this point i think the problem is that i was unable to flash cust.img with fastboot
Whad did I Do?
(Bootloarder must be unlock)
1st: Crying.
2nd: read tons of things on XDA
3rd: Try to re run the script but fail because the phone was still rooted.
4th: Crying
5th: Read lot of other things on XDA
6th: this is the good IDEA
7th: Download Huawei firmware finder
8th: Download Huawei Multitool
9th: Download Huawei Update Extractor
10th: download by the tool the full OTA firmware and dependencies (in my case VTR-L09C432)
11th: extract the update.app (chose "other" for phone model) from the big "update.zip" dowloaded before an put it in a folder of your choice
12th: extract the update.app from the "update_all_hw_xxx" dowloaded before an put it in other folders, just incase of files could have the same names (not sure of it)
13th: run Huawei Multitool (il will create a folder in the path of where the app is when you click, the folder you need is "unbrick")
14th: choose 6 on Huawei multi tool, it will show you what img's you need, and you need everthing exept data.img (the cus.img is in folder wehre you extract update_all_hw_xxx) in "unbrick" folder -> Place the .img needed in the "unbrick" folder (very important)
15th: boot your phone in bootloader mode (phone off, vol-down+plug USB)
16th: clic the button to launch procedure (press N)
17th: have a coffee during the upload it'll ask to reboot
18th: If the problem is solved: cool, stop here
IF NOT: shutdown the phone
19th: Go in classic recovery: Phone off, Vol-Up + Plug USB, when huawei logo stop pressing vol-up
DO NOT BOOT eRecovery, it will not help
20th: in classic recovery do factory reset AND cache reset
21th Reboot
You can relock your bootloader if you want with your code.
The only thing i don't know to do and if someone can telle me is, before the flash of every things or at a moment, if i can flash via ADB the OEM info for an official bootloader relock.
Thx to @mankindtw, @worstenbrood and @inside!out
Hope it will help, it work for me.
edit: can an admin put my title in bold?
Like the Parts with crying ?
Can you create a easy easy 1 click installer for the unbrand Script? ?
StonyD said:
Like the Parts with crying
Can you create a easy easy 1 click installer for the unbrand Script?
Click to expand...
Click to collapse
Unfortunately not, i'm not a dev, i don't have the knowledge......
Maybe one day i'll try
Hi thanks for sharing your experience.
I want just to ask some questions :
Where to place all folders that you talked about ? Directory?
What you mean by chose phone model ? In that new folder ?
The brick folder that will appear within huawei multitool folder ? I saw just unbrick folder.
Thanks.
dxkernel said:
Hi thanks for sharing your experience.
I want just to ask some questions :
Where to place all folders that you talked about ? Directory?
What you mean by chose phone model ? In that new folder ?
The brick folder that will appear within huawei multitool folder ? I saw just unbrick folder.
Thanks.
Click to expand...
Click to collapse
When you download the 3 files of the firmware, place them where you want.
When you lauchn Huawei Multitool, it will create the "unbrick" folder in the Huawei Multitool folder (my bad) not "brick", i update the first post.
When you use Huawei Update Extractor, you have choices for type of firmware, chose other.
help anyone i need the cust file for the p10 plus
i dont understand where im supposed to get the file
Hi, i am a bit confused.
I download all 3 files with rhe firmware tool. But then i got lost. Can you help me please?
Thanks
[email protected] said:
help anyone i need the cust file for the p10 plus
i dont understand where im supposed to get the file
Click to expand...
Click to collapse
It's in one of the ZIP (680mo in my memory)
Hello. Your post has been very helpful, after hours I've now managed to make some progress. All seems to have gone well after following your instructions, however at the end I'm unable to do a factory reset. At most it gets to 6% then fails. Any ideas on what may be going on?
I'm starting to think the phone may be beyond saving, all for one stupid mistake while rooting .
I can't find "other" or "other model" folder.
Thanks
aalmeida1972 said:
I can't find "other" or "other model" folder.
Thanks
Click to expand...
Click to collapse
It's the default option in the firmware extractor, i add the precision in case of
My bad, the explanation was not clear, i modified it.
From my french mind to english, sometimes a little bit difficult....
DidymusNoble said:
Hello. Your post has been very helpful, after hours I've now managed to make some progress. All seems to have gone well after following your instructions, however at the end I'm unable to do a factory reset. At most it gets to 6% then fails. Any ideas on what may be going on?
I'm starting to think the phone may be beyond saving, all for one stupid mistake while rooting .
Click to expand...
Click to collapse
Did you flash the two recoverys ? Can You still access to twrp?
If twrp still here use it to erase system partition
In fastoboot u can do It too
Follow these steps to :
1-Go to recovery option hold the power and volume button at same time .
2-then go advanced option.
3-Its time to factory reset your phone .
4-Finally Rebort your device and waite few seconds.
4-
Any ideas what I should do if my phone still will not reboot please ?
I'm still crying
I have a canada version of vtr-09 p10, and I dont know my firmware number I couldn't find my firmware in that software, please tell me what can I do.
---------- Post added at 09:12 AM ---------- Previous post was at 09:09 AM ----------
jimmygarison said:
Follow these steps to :
1-Go to recovery option hold the power and volume button at same time .
2-then go advanced option.
3-Its time to factory reset your phone .
4-Finally Rebort your device and waite few seconds.
4-
Click to expand...
Click to collapse
omg, how do you do that? you mean a advanced mode is in recovery mode or erecovery mode? I brought p10 at bell, I just couldnt find its firmware number.
ive done everything in this thread. the multitool installer finished without errors, then i did vol up + vol down + power, and it froze at 5 percent "installing update" then entered a reboot loop. then i tried a factory reset with vol up + power and it stoped at 25 percent.
Using the multi-tool
inoxas said:
Hello all,
First of all the story.
I used the script to rebrand, it has a fail but the phone still working.
One evening, i decided to wipe all by twrp and re run the unbrand script..... that was a huge error, the phone boot but boot loop, and after, the script stuck an no recognise the twrp on the phone.
Tried lot of things like flashing recovery etc in fastboot but nothing else happen than a boot and a black screen with nav bar only.
At this point i think the problem is that i was unable to flash cust.img with fastboot
Whad did I Do?
(Bootloarder must be unlock)
1st: Crying.
2nd: read tons of things on XDA
3rd: Try to re run the script but fail because the phone was still rooted.
4th: Crying
5th: Read lot of other things on XDA
6th: this is the good IDEA
7th: Download Huawei firmware finder
8th: Download Huawei Multitool
9th: Download Huawei Update Extractor
10th: download by the tool the full OTA firmware and dependencies (in my case VTR-L09C432)
11th: extract the update.app (chose "other" for phone model) from the big "update.zip" dowloaded before an put it in a folder of your choice
12th: extract the update.app from the "update_all_hw_xxx" dowloaded before an put it in other folders, just incase of files could have the same names (not sure of it)
13th: run Huawei Multitool (il will create a folder in the path of where the app is when you click, the folder you need is "unbrick")
14th: choose 6 on Huawei multi tool, it will show you what img's you need, and you need everthing exept data.img (the cus.img is in folder wehre you extract update_all_hw_xxx) in "unbrick" folder -> Place the .img needed in the "unbrick" folder (very important)
15th: boot your phone in bootloader mode (phone off, vol-down+plug USB)
16th: clic the button to launch procedure (press N)
17th: have a coffee during the upload it'll ask to reboot
18th: If the problem is solved: cool, stop here
IF NOT: shutdown the phone
19th: Go in classic recovery: Phone off, Vol-Up + Plug USB, when huawei logo stop pressing vol-up
DO NOT BOOT eRecovery, it will not help
20th: in classic recovery do factory reset AND cache reset
21th Reboot
You can relock your bootloader if you want with your code.
The only thing i don't know to do and if someone can telle me is, before the flash of every things or at a moment, if i can flash via ADB the OEM info for an official bootloader relock.
Thx to @mankindtw, @worstenbrood and @inside!out
Hope it will help, it work for me.
edit: can an admin put my title in bold?
Click to expand...
Click to collapse
Can you please tell me what option 6 is on the multi-tool. Do I drag files into the unbrick folder?
Pombal81 said:
Can you please tell me what option 6 is on the multi-tool. Do I drag files into the unbrick folder?
Click to expand...
Click to collapse
opt 6 is in my memory "unbrick" or recover.
You have to put all the .img files needed exept data.img that is not possible to heve because this file is on your phone and encrypted.
Thanks for helping me, how can I tell what .img files are needed? I can't see anything that will tell me this?
---------- Post added at 04:13 PM ---------- Previous post was at 04:04 PM ----------
I'm sorry, I'm a bit confused on the intructions:-
I downloaded the full update zip file from the url using the firmware finder, there was another url link that came up called full/public/update - do I need the zip for this too?
I extracted the update zip to a folder and then extracted the update.app file using the Huawei update extractor.
Now I have a very long list of .img files in the extractor and I'm not clear what I need to do next i.e do I move them all into the unbrick folder on the tool?
Hi, I have since been able to extract the right files for the multi-tool. I extracted them again from the extractor. I now have placed them into the unbrick file. My problem now is that I can't run the tool - when I open the multi-tool .bat file its asking for a proxy port, where can I find this?