Hi,
In case anyone (like me) has issues installing the S1boot driver for your xperia, to be able to flash other firmware, here is the link :
http://forum.xda-developers.com/attachment.php?attachmentid=718060&d=1315877046
This driver will install itself after you run the executable file dpinst.exe after having extracted the archive.
With the driver you can use the flash tool (combined with your phone booted in flash mode (volume down + usb connect)) to flash other firmware on the phone.
P.S. i'm not talking about fastboot mode, but "flash mode" ;-)
Br.
Michel
a question sir
Do I need to unlock the bootloader first before flashing?
And do u use Cyanogen or Miui?
thanks!
yujin_11 said:
a question sir
Do I need to unlock the bootloader first before flashing?
And do u use Cyanogen or Miui?
thanks!
Click to expand...
Click to collapse
i dont think you have to unlock the bootloader to flash your phone, you have to enable usb debugging in your phone ,settings>applications>development>usb debugging
pls correct me if im wrong
Hi,
As far as I know you "have" to unlock the bootloader before being able to flash custom firmware on the Phone.
I unlocked the bootloader via the sonyericsson site link :
http://unlockbootloader.sonyericsson.com/
I use 4pda.ru firmware+kernel from this thread :
http://forum.xda-developers.com/showthread.php?t=1424121
Reason I dont use CM or MIUI is that I need a 100% functional phone (both corporate and private usage, that's why) . I encourage the development on CM and MIUI, don't get me wrong here
You can find more information about unlocking, rooting and flashing custom kernels and firmware on this XDA forum.
Br.
Michel
vleutmans said:
Hi,
As far as I know you "have" to unlock the bootloader before being able to flash custom firmware on the Phone.
I unlocked the bootloader via the sonyericsson site link :
http://unlockbootloader.sonyericsson.com/
I use 4pda.ru firmware+kernel from this thread :
http://forum.xda-developers.com/showthread.php?t=1424121
Reason I dont use CM or MIUI is that I need a 100% functional phone (both corporate and private usage, that's why) . I encourage the development on CM and MIUI, don't get me wrong here
You can find more information about unlocking, rooting and flashing custom kernels and firmware on this XDA forum.
Br.
Michel
Click to expand...
Click to collapse
how about flashing through CWM recovery like the previous xperia? is it any different? because before the msm7227 and qsd8250 bootloader been unlocked, people use CWM recovery to flash rite?
syin16 said:
how about flashing through CWM recovery like the previous xperia? is it any different? because before the msm7227 and qsd8250 bootloader been unlocked, people use CWM recovery to flash rite?
Click to expand...
Click to collapse
.well I don't know if you can flash another Rom without the boot loader being unlocked. Anybody?
vleutmans said:
.well I don't know if you can flash another Rom without the boot loader being unlocked. Anybody?
Click to expand...
Click to collapse
You can setup CWM and flash ROM on unlocked device, but you can't flash kernel and baseband.
So current situation is: you can't flash CM or MIUI (which requires their own kernels) on unlocked device, but you can flash stock-based mods like repack4pda (which works with stock kernels).
ImmortAlex said:
You can setup CWM and flash ROM on unlocked device, but you can't flash kernel and baseband.
So current situation is: you can't flash CM or MIUI (which requires their own kernels) on unlocked device, but you can flash stock-based mods like repack4pda (which works with stock kernels).
Click to expand...
Click to collapse
You both mean locked right?
Related
I have SE stock rom 2.1 update 1 with stock kernel on my x10i mini. I have rooted my device and I want to know if I can enable multitouch on my phone. Please someone help me .
Thanks in advance...
I didnt try only kernel,but I try custom MINICM7-2.2.0 based on GB 2.3.7 and it is like new phone reBORN, fast&stable.
Sort off, yes
Check this
For stock kernel
The links are dead.. Downloading of x8gesture.ko not working.
SmG67 said:
Sort off, yes
Check this
For stock kernel
Click to expand...
Click to collapse
downloading not working of x8gesture.ko
In that case, there are a few froyo-based roms (srom-froyo, froyobread) that include this particular module, don't know if those links are still working, try to search the x10mini development forum to find them
SmG67 said:
In that case, there are a few froyo-based roms (srom-froyo, froyobread) that include this particular module, don't know if those links are still working, try to search the x10mini development forum to find them
Click to expand...
Click to collapse
Do they require unlocking of bootloader .Actually I am afraid of this purpose.Is there any GB rom that can be flashed without unlocking bootloader on stock kernel 2.6.29 Thanks for Help.
You only need to unlock your bootloader if you need a custom kernel.
All the froyo roms run on the stock kernel, so they can be installed without unlocking the bootloader.
GB roms all run on a custom kernel (on the x10Mini), so you need to unlock the bootloader for that.
If you get S1Tool and post the output, i could probably provide you with some guidance on the safety of unlocking
SmG67 said:
You only need to unlock your bootloader if you need a custom kernel.
All the froyo roms run on the stock kernel, so they can be installed without unlocking the bootloader.
GB roms all run on a custom kernel (on the x10Mini), so you need to unlock the bootloader for that.
If you get S1Tool and post the output, i could probably provide you with some guidance on the safety of unlocking
Click to expand...
Click to collapse
Yeah !! in the output It shows SEMC something with capital R . Actually date is 10w29. Flashtool is big file and I have a slow connection... Smthng else for unlocking bootloader
it should say semc-simlock certificate, and 10w29 is ok too. you can get the manual scripts for unlocking the bootloader in a slightly smaller package, but the point about unlocking the bootloader is to install a custom kernel... you will need flashtool for that... lol.
I would say, try one of the froyo roms if they're still available, i'm pretty sure froyobread with the hotfix can be downloaded and they can be installed on the stock kernel. but then, those are big downloads too on a slow connection
SmG67 said:
it should say semc-simlock certificate, and 10w29 is ok too. you can get the manual scripts for unlocking the bootloader in a slightly smaller package, but the point about unlocking the bootloader is to install a custom kernel... you will need flashtool for that... lol.
I would say, try one of the froyo roms if they're still available, i'm pretty sure froyobread with the hotfix can be downloaded and they can be installed on the stock kernel. but then, those are big downloads too on a slow connection
Click to expand...
Click to collapse
Ok I am starting... Given 30 minutes to my wintage phone,
Thanks for paying attantion..
yupp its done ..XDA rocks B-)
You're welcome
Array. I've unlocked the bootloader and I have xrecovery on my phone. I also have put GB miniCM rom as update.zip on SD card
Now the problem is on GB thread it said that I should have naA kernel on my phone and on naA kernel thread it said that I should have GB custom rom. I have only unlocked the bootloader and still on stock rom and stock kernel.,
once again its ur turn to sort me out of this problem...
:-D
First you flash the nAa kernel using flashtool
Then flash the rom through cwm
Sent from my E10i using xda premium
Bro I have gone one step ahead and have installed cloclwordmod .. now I am flashing the naA kernel... But what after flashing the kernel if I start my phone do I have to first enter in CWM and flash new minicm7 rom or I can use this kernel on my stock rom 2.1
Go into CWM and install MiniCM, stock will not boot on the nAa kernel.
SmG67 said:
Go into CWM and install MiniCM, stock will not boot on the nAa kernel.
Click to expand...
Click to collapse
Done ;-)
I did a search but did not exactly what I wanted.
Have a few questions in mind:
1.Can I Flash any custom Rom with my stock kernel?
2.Will doing the above cause any problems?(brick,bootloops,buggy rom)
3.Also unlocking the bootloader(is it necessary?Please a Noob here)via the official method(sk17i)I heard we would loose access to certain company features(track.id etc)would I loose access to official update of firmware from them?
4.Most of the Rom's featured here have not specified which kernel to be used with them could anyone suggest one which can handle most Rom's?
gamer.11 said:
I did a search but did not exactly what I wanted.
Have a few questions in mind:
1.Can I Flash any custom Rom with my stock kernel?
2.Will doing the above cause any problems?(brick,bootloops,buggy rom)
3.Also unlocking the bootloader(is it necessary?Please a Noob here)via the official method(sk17i)I heard we would loose access to certain company features(track.id etc)would I loose access to official update of firmware from them?
4.Most of the Rom's featured here have not specified which kernel to be used with them could anyone suggest one which can handle most Rom's?
Click to expand...
Click to collapse
Please read the sticked threads, everything should be explained there
1. Yes, custom roms for locked bootloader
2. It can cause bricks or bootloops, roms where something's not working can be buggy
3. Unlocking the bootloader is necessary for nearly all custom roms like Cyanogenmod, AOKP, etc. You will loose your DRM (who needs them?) and track id won't work, but if you download the latest version it should work! You can't update via PC Companion, but you can flash official updates using flashtool :good:
4. All the kernels like Rage Kernel, kernel panic, x kernel, if you look in the kernel thread there should be explained for which software version they are...
That's it, but should be explained in the sticked thread, too
mihahn said:
Please read the sticked threads, everything should be explained there
1. Yes, custom roms for locked bootloader
2. It can cause bricks or bootloops, roms where something's not working can be buggy
Click to expand...
Click to collapse
But if done properly they would run properly right? Without Bricking the device? Also should I be in ICS(stock) to install any ICS Roms(custom)? Or does the requirements for each Rom different?
I did find some locked BL Roms Thanks:goodSticky Threads)
gamer.11 said:
But if done properly they would run properly right? Without Bricking the device? Also should I be in ICS(stock) to install any ICS Roms(custom)? Or does the requirements for each Rom different?
I did find some locked BL Roms Thanks:goodSticky Threads)
Click to expand...
Click to collapse
Yes if u do it properly as instructed there should be no problem..U dont need to be in ICS to flash ICS custom roms. Just read the instruction properly in the rom threads
saqib nazm said:
Yes if u do it properly as instructed there should be no problem..U dont need to be in ICS to flash ICS custom roms. Just read the instruction properly in the rom threads
Click to expand...
Click to collapse
He should be on ics to flash ics custom roms, because otherwise you could get a bootloop
mihahn said:
He should be on ics to flash ics custom roms, because otherwise you could get a bootloop
Click to expand...
Click to collapse
A bit too late. How to fix the loop? Should I use flashtool to flash the stock rom?:crying:
Or should I use the Sony PC companion to "repair it"
(Note I'm in stock Kernal With root, So will doing it via Sony PC cause more problems?Also since I have root will I be able to use the official updates and Repair options?)
gamer.11 said:
A bit too late. How to fix the loop? Should I use flashtool to flash the stock rom?:crying:
Or should I use the Sony PC companion to "repair it"
(Note I'm in stock Kernal With root, So will doing it via Sony PC cause more problems?Also since I have root will I be able to use the official updates and Repair options?)
Click to expand...
Click to collapse
i would suggest u nt to use Sony PC companion after rooting, unlocking BL as FOTA updates may brick ur device
(when u unlock BL its quoted there that not to do FOTA update after unlocking BL)
I dont know it brick device or nt bt why take risk?
Did u make a cwm backup??? If yes just restore it or flash the official ftf using flashtool....
I think I may have BRICKED it!!....stuck at SE logo at start-up cant enter CM recovery!!....I did make a backup in the SD card but since I could not enter recovery no use. I tried to flash the official firmware via PC(flashtool) but it says USB debugging is disabled!
Have I officially BRICKED my device? is there any way to get back to the good old GB and stock Rom?:crying::crying::crying:
Use Flashtool, Flash the Stock FTF and all should be come good again
Or Use SEUS/PCC and try The Repair Option
Sent From My ST15i/ST18i Xperia Smartphone
Click to expand...
Click to collapse
As singh said, use flashtool to flash stock ftf
Sent from my MANGO
hi.
i have a "lww". im root. my model is wt19a 4.0.4 build 4.1.B.0.431 kernel [email protected] # 1.
can i flash any kernal for my phone? if no, does it have to be compatible by build or model?
First of all to install custom kernel You need to unlock bootloader. Not every phone can be unlocked, cause it depends if Your phone's bootloader unlock status is yes or no. You can check this in service menu (in dialer tap *#*#7378423#*#* [ *#*#SERVICE#*#* ] ) and go to Service Info and Configuration. There should be rooting status.
It's also good to make .FTF files from Your ROM to use them in flashtool BEFORE any modifications. Just in case http://forum.xda-developers.com/showthread.php?t=2075736
Bolussimo said:
First of all to install custom kernel You need to unlock bootloader. Not every phone can be unlocked, cause it depends if Your phone's bootloader unlock status is yes or no. You can check this in service menu (in dialer tap *#*#7378423#*#* [ *#*#SERVICE#*#* ] ) and go to Service Info and Configuration. There should be rooting status.
It's also good to make .FTF files from Your ROM to use them in flashtool BEFORE any modifications. Just in case http://forum.xda-developers.com/showthread.php?t=2075736
Click to expand...
Click to collapse
Thanks for the reply.
my bootloader says yes. now i thought the whole thing witht the bootloader was for rooting. like i mentioned before i am rooted. i have already made a backup of my stock rom if thats what you mean by making my own .ftf file. dude where is the thank you button?
Nope, rooting Your device will give You access to system partition, but it doesn't allow to change kernels.
Backup in .zip is fine, but I suggest to make a .ftf. It will help You to "unbrick" Your phone if something bad happen (cause if it's problem with ROM U have to flash any working ROM anyway, but if U unlock Your bootloader SUS and PC Companion won't work, so the only solution is to flash it using flashtool). Also .ftf will allow You to revert software to stock one, with branding, customization etc. (if U would like to use warranty for any purpose stock ROM and branding are necessary).
So if bootloader unlock status is yes - then U are able to unlock Your bootloader and install any custom kernel. Check this thread, it will help You with everything. http://forum.xda-developers.com/showthread.php?t=2148684
Bolussimo said:
Nope, rooting Your device will give You access to system partition, but it doesn't allow to change kernels.
Backup in .zip is fine, but I suggest to make a .ftf. It will help You to "unbrick" Your phone if something bad happen (cause if it's problem with ROM U have to flash any working ROM anyway, but if U unlock Your bootloader SUS and PC Companion won't work, so the only solution is to flash it using flashtool). Also .ftf will allow You to revert software to stock one, with branding, customization etc. (if U would like to use warranty for any purpose stock ROM and branding are necessary).
So if bootloader unlock status is yes - then U are able to unlock Your bootloader and install any custom kernel. Check this thread, it will help You with everything. http://forum.xda-developers.com/showthread.php?t=2148684
Click to expand...
Click to collapse
i found that thread last night thats why i posted this question.
my boot loader says yes. i also flashed cwm using recoverx.
just to be sure. with my phone software the i mentioned above ^^. using lets say flashtool i can flash any kernal rom combination even if it .587, or for lets say or the wt19i?
thanks again for the help.
No, not every combination will work And flashtool is used to repair phone, not to flash custom ROMs. There are some ROMs working on stock kernel (which U have now) - mainly based on stock .431 or .587 software. U can flash them using recovery (which U have now). To be honest I don't know what are the differences between wt19i and wt19a. But as a experiment (lol) I flashed baseband from SK17a into my SK17i and everything was ok. That's why I told U to create a ftf package, which will allow U to flash stock ROM if something went wrong.
So, for now:
If U would like install any ICS ROM (based on original Sony .431 or .587 compilation - You can try it right away.
If U would like to flash CyanogenMod ROMs (CM7.2 [android 2.x GingerBread], CM9 [android 4.0.x IceCreamSandwich], CM10 [android 4.1 JellyBean], CM10.1 [android 4.2 JellyBean], CM10.2 [android 4.3 JellyBean] ) and other based on it, U will have to unlock bootloader at the first place and then flash kernel suitable for Your device (LWW is coded as coconut) and then flash ROM.
Bolussimo said:
No, not every combination will work And flashtool is used to repair phone, not to flash custom ROMs. There are some ROMs working on stock kernel (which U have now) - mainly based on stock .431 or .587 software. U can flash them using recovery (which U have now). To be honest I don't know what are the differences between wt19i and wt19a. But as a experiment (lol) I flashed baseband from SK17a into my SK17i and everything was ok. That's why I told U to create a ftf package, which will allow U to flash stock ROM if something went wrong.
So, for now:
If U would like install any ICS ROM (based on original Sony .431 or .587 compilation - You can try it right away.
If U would like to flash CyanogenMod ROMs (CM7.2 [android 2.x GingerBread], CM9 [android 4.0.x IceCreamSandwich], CM10 [android 4.1 JellyBean], CM10.1 [android 4.2 JellyBean], CM10.2 [android 4.3 JellyBean] ) and other based on it, U will have to unlock bootloader at the first place and then flash kernel suitable for Your device (LWW is coded as coconut) and then flash ROM.
Click to expand...
Click to collapse
im sorry i asked so much. as your aware im a noob. till now i only rooted/flashed a galaxy 5 (not s5). it was so easy.
i assume im going to use cwm to flash the kernel, am i wrong?
if not a tutorial link will be fine and ive got all the points. and this is one hard phone to customize. but i wanted the 1.ghz processor.
thank you like in a big way man.
CWM is used to backup Your ROM and install custom ROMs. To flash kernel U will have to use fastboot mode, and it has nothing in common with CWM. Check this thread, 2nd post: http://forum.xda-developers.com/showthread.php?t=1730874
Bolussimo said:
First of all to install custom kernel You need to unlock bootloader. Not every phone can be unlocked, cause it depends if Your phone's bootloader unlock status is yes or no. You can check this in service menu (in dialer tap *#*#7378423#*#* [ *#*#SERVICE#*#* ] ) and go to Service Info and Configuration. There should be rooting status.
It's also good to make .FTF files from Your ROM to use them in flashtool BEFORE any modifications. Just in case http://forum.xda-developers.com/showthread.php?t=2075736
Click to expand...
Click to collapse
hi again. sorry last question. i installed flashtool. when innstalling the flashtool driver i cant find LWW in the list.
what did this noob do wrong??? lol
If U'r trying to install one of d latest FT just install fastboot and flash drivers (2 last options as far as I remeber) and that's it.
Hello Friends I am new to this forum
I have Sony Live with walkman...Great phone
Its completely stock Running on Stock ICS and Stock kernel (Its a bit slow)
So can anyone here Please help me getting started on to flash Recovery and Then any Rom and Kernel ...
I want to install CM 9.1.0 official build...
THank you for reading
Please Reply ASAP
Read my guides on how to unlock the bootloader and how to flash a custom rom/kernel and you should know how to install cm9 or any other custom rom
Sent from my Nexus 4 running Android 4.4
mihahn said:
Read my guides on how to unlock the bootloader and how to flash a custom rom/kernel and you should know how to install cm9 or any other custom rom
Sent from my Nexus 4 running Android 4.4
Click to expand...
Click to collapse
Okay Thanks alot
I'll unlock bootloader using the Automated method
One more thing do I need to unlock bootloader in order to flash Custom kernel
Flashtool link not working
LaKsHaY1997 said:
Okay Thanks alot
I'll unlock bootloader using the Automated method
One more thing do I need to unlock bootloader in order to flash Custom kernel
Flashtool link not working
Click to expand...
Click to collapse
Yes you need an unlocked bootloader to flash a custom kernel. But you can flash a custom kernel using fastboot tools and a command prompt or a terminal (Linux) too. You don't need flashtool
If the link for flashtool is not working, check the stickies in Dev section, flashtool should be there. It should still be downloadable
Sent from my Nexus 4 running Android 4.4
LaKsHaY1997 said:
Okay Thanks alot
I'll unlock bootloader using the Automated method
One more thing do I need to unlock bootloader in order to flash Custom kernel
Flashtool link not working
Click to expand...
Click to collapse
yes you should be having a unlocked bootloader for flashing a custom kernel however if you want to go back to stock ICS someday you will have to re-lock your bootloader and simply click on "Repair Phone" in SEUS.......
Aneel said:
yes you should be having a unlocked bootloader for flashing a custom kernel however if you want to go back to stock ICS someday you will have to re-lock your bootloader and simply click on "Repair Phone" in SEUS.......
Click to expand...
Click to collapse
or u can flash a stock ics ftf using flashtool,,it would be more convenient than using SEUS
Hello
I have a few questions about the hole "thing" cause this is my first android phone and on apple there was just the option jailbreaked or not jailbreaked
My first question is about the bootloader.
since i was reading the thread "[FULL ROOT] Community RootKit! (ASEC vulnerability) {v01} [20140615]" i am asking me why should i unlock my bootloader when im able to get root without doing this?
Is there any special point for wich i need the unlocked bootloader or is it just written for the people who unlocked there bootloader already?
Then to second question is about the sequence.
Am i right when i
1. get root
2. install cwm or twrp
3. install custom rom?
by the way: is there any huge difference between twrp and cwm? because at the table "Kernels" there is the TWRP for the Xperia T2 Ultra and an unofficial version and from CMW is an unofficial version too? Wich should i use?
and my last question is should i wait for version 2 of the RootKit or are there just small differences?
Scarpall said:
Hello
I have a few questions about the hole "thing" cause this is my first android phone and on apple there was just the option jailbreaked or not jailbreaked
My first question is about the bootloader.
since i was reading the thread "[FULL ROOT] Community RootKit! (ASEC vulnerability) {v01} [20140615]" i am asking me why should i unlock my bootloader when im able to get root without doing this?
Is there any special point for wich i need the unlocked bootloader or is it just written for the people who unlocked there bootloader already?
Then to second question is about the sequence.
Am i right when i
1. get root
2. install cwm or twrp
3. install custom rom?
by the way: is there any huge difference between twrp and cwm? because at the table "Kernels" there is the TWRP for the Xperia T2 Ultra and an unofficial version and from CMW is an unofficial version too? Wich should i use?
and my last question is should i wait for version 2 of the RootKit or are there just small differences?
Click to expand...
Click to collapse
Bootloader unlock is required to install Custom kernels like DOOMLORDS kernel. In case if you dont want that then no need to unlock BL.
Just follow this post http://forum.xda-developers.com/showthread.php?t=2784757 to get root on Locked Bl and then revert back to .402
manu44 said:
Bootloader unlock is required to install Custom kernels like DOOMLORDS kernel. In case if you dont want that then no need to unlock BL.
Just follow this post http://forum.xda-developers.com/showthread.php?t=2784757 to get root on Locked Bl and then revert back to .402
Click to expand...
Click to collapse
hi manu44,
first thank you for the answer.
but it is possible to root and use an custom rom with an locked bootloader or?
is there a away to do it step per step?
i mean first root with rootkit, then later install an custom rom ? or do i need to do it all at one time ?
Scarpall said:
hi manu44,
first thank you for the answer.
but it is possible to root and use an custom rom with an locked bootloader or?
is there a away to do it step per step?
i mean first root with rootkit, then later install an custom rom ? or do i need to do it all at one time ?
Click to expand...
Click to collapse
A custom ROM is different from a custom kernel. Some custom ROMs do not require custom kernels (because they use stock kernel), but others do. So it really depends on the custom ROM that you want to use. Instructions and requirements will be posted in the respective ROM thread.
But if you want to use a custom kernel, then you will need to unlock the bootloader first.
And obviously, if you want to flash a custom ROM that needs custom kernel, then you will have to unlock your bootloader first.
Even if you want to flash a custom ROM that does not require a custom kernel, you need to first root the phone with the RootKit. Because flashing custom ROMs is usually done via recovery, and recovery installation requires root.
Hope the above is not too confusing.
hush66 said:
A custom ROM is different from a custom kernel. Some custom ROMs do not require custom kernels (because they use stock kernel), but others do. So it really depends on the custom ROM that you want to use. Instructions and requirements will be posted in the respective ROM thread.
But if you want to use a custom kernel, then you will need to unlock the bootloader first.
And obviously, if you want to flash a custom ROM that needs custom kernel, then you will have to unlock your bootloader first.
Even if you want to flash a custom ROM that does not require a custom kernel, you need to first root the phone with the RootKit. Because flashing custom ROMs is usually done via recovery, and recovery installation requires root.
Hope the above is not too confusing.
Click to expand...
Click to collapse
Thank you
So just to be sure.
I Run the toolkit for root
Then i take twrp or cwm
And then i flash a custom Rom wich use stock kernel
And that can i do with a locked bootloader?
What can be different in an other kernel?
Scarpall said:
Thank you
So just to be sure.
I Run the toolkit for root
Then i take twrp or cwm
And then i flash a custom Rom wich use stock kernel
And that can i do with a locked bootloader?
What can be different in an other kernel?
Click to expand...
Click to collapse
Yes, run Rootkit, install recovery (TWRP/CWM) and then you can flash custom ROM which uses stock kernel.
Custom kernels allow functions such as overclocking, undervolting, etc.
hush66 said:
Yes, run Rootkit, install recovery (TWRP/CWM) and then you can flash custom ROM which uses stock kernel.
Custom kernels allow functions such as overclocking, undervolting, etc.
Click to expand...
Click to collapse
Big thanks to you
Now i know that i can keep my bootloader locked.
Take note that by modifying your device you warrenty is voided and you can posibly brick your device
(brick meaning dead phone) aka brick
For any info aditional info you can go here
http://forum.xda-developers.com/showthread.php?t=2775411
Later ill update the thread to add better/new info which i forgot
Sent from my D6503 using XDA Premium 4 mobile app
Scarpall said:
Big thanks to you
Now i know that i can keep my bootloader locked.
Click to expand...
Click to collapse
Or you can use the toolkit on .55/.69
Then follow Nuts thread and http://forum.xda-developers.com/showthread.php?t=2784757
this would bring you back to .402 and have recovery installed by default on Locked bootloader
manu44 said:
Or you can use the toolkit on .55/.69
Then follow Nuts thread and http://forum.xda-developers.com/showthread.php?t=2784757
this would bring you back to .402 and have recovery installed by default on Locked bootloader
Click to expand...
Click to collapse
then i have 2 new questions
1. How can i downgrade my phone ? just download the fw and use flashtool?
got an iphone till now and there it was a hard work to do it ..
2. is there any difference between locked and uinlocked bootloader? i mean in the point of restoring so that i have my warranty back?
1. There's now an even easier way to root the 402 firmware that does not require you to downgrade first:
http://forum.xda-developers.com/showthread.php?t=2784900
But note this post, where you have to change something in the install.bat file for it to work on the Z2:
http://forum.xda-developers.com/showpost.php?p=53480221&postcount=81
2. It's a little more work if your bootloader is unlocked and you want to relock it before sending it to the service centre. You need to have your TA backup before doing so. If your bootloader is locked, you just have to remove root via SuperSU before sending it in for service.