Related
Maybe somebody can help me with this. I went through all the steps to unlock the bootloader and root the phone using Lokifish Marz guide(very helpful by the way). and now when you boot the phone up in the top left of the screen is the word unlocked.
However, when I go through the process of moto-fastboot. it acts like it's working just fine,erase recovery...OK, Sending Recovery.... OKAY, writing Recovery.... OK. but when I go to boot into recovery (power+volume down, scroll down to Android recovery and hit volume up) I get the Triangle with a !.
To make matters even more confusing, is I have got it to boot up to CWM. I did a full back up on internal, including web top and I thought I was good. I had to run to the grocery store so I booted my phone back up for the time being and went and did my errands, came back and booted into recovery(with the above way.) and bam! triangle, !, android guy.
I've done this a couple times. I'm assuming I'm doing something wrong however I can't seem to find anybody else that has had the same problem. I've held of on trying to flash a different rom, so I'm still running stock rooted.
I'm running Android Ver. 2.3.4 Build 198_6 and I've tried flashing a coule diffent versions of recovery3 including the one that came with Root-Unlock-Recover.
Anybody have any ideas?
I also have the same problem with my motorola photon. i went thru the steps
to unlock the bootloader it said it was unlocked i checked to make sure i was rooted with root check and it said i was. but when i power the phone on and boot i can see android recovery but when i select it the menu is not there just
a triangle and the android symbal, then i have to pull the battery to restart
it does and the phone seems to be working ok.
Well it make me feel better that im not the only one. What tools did you use to unlock your boot loader?
Sent from my MB855 using Tapatalk
What version of stock did you guys start with? I think there was an USCC OTA that IIRC locked up the boot loader on the Electrify.
Sent from my MB855 using xda premium
Started with Android Ver. 2.3.4 Build 198_6 , its the same one that's on there right now. and it's saying my boot loader is unlocked, I actually went through the fastboot unlock process again to check and it said it was already unlocked. Although I just tried flashing twrp recovery and the same thing happened, so it seems to be behaving like it flash's the new recovery but it doesn't.
Strangely though, I've been able to get into Clockwork Mod once or twice, but as soon as I reboot, and to go to recovery it takes me to triangle !, is that just stock recovery/bootloader? So basically CWM is a one time use then back to fast-boot to try again and again.
maybe I should look into re-locking and just going with a boot-strap?
So with some more Tinkering it seems I can get to ClockWorkMod so long as I don't reboot my phone all the way.
if I flash clockwork mod. pull the battery and boot into CWM it works fine, but if I fastboot reboot all the way it goes back to stock recovery. I'm beginning to think the boot loader isn't really unlocked even though it says it is.
Anybody else heard of this?
I have the same problem
please help me what to do
an9093 said:
I have the same problem
please help me what to do
Click to expand...
Click to collapse
READ THIS
and then
READ THIS
an9093 said:
I have the same problem
please help me what to do
Click to expand...
Click to collapse
I end up posting over in the developers form and the problem appears to be the file install-recovery.sh inside system/etc
I posted how I fixed it and somebody else also posted. check down at the bottom.
http://forum.xda-developers.com/showthread.php?t=1468978
Okay folks, I am at oss and need to know if I am just flat out screwed or if maybe, just
Maybe I might have a shot at storing my EVO 3d. I was running meanrom. Everything was running smoothly but I decided to give ViperROM a shot. So I d a wipe, rebooted into recovery and flashed ViperROM. Initially I thought everything had gone according to plan until I realized something was amiss when I attempted to start 4g. 4g wouldn't start. I did some looking into and came to tonclusion that because as far as I could tell because I had been running meanrom when I flashed viper the kernel no longer stock was not compatible with viper. So I started flash image GUI, found stockkernel.zip on my sd card and flashed or so I thought the stock kernel in hopes that after I did then the 4g would work on ViperROM. Well I was mistaken. When the phone rebooted, after the initial HTC screen rather than next seeing the ViperROM boot animation my screen went black. It remained there laughing at me till the phone automatically rebooted and then once again went to a darn black screen. It seems my phone is stuck in an endless loop. HTC screen, black scree reboot, HTC... Ect. I then booted into recovery wiped again and tried to then just reinstall meanrom. Well, according twrp recovery the installation went smoothly but after HTC screen, my phone goes straight to black screen. Ive tried various variations of reinstallations and nothing has worked so far. Am I stuck like this or is there something that can be done. Any pointers or suggestions would be more than appreciated
le?OR am I
3ncrypt3d said:
Okay folks, I am at oss and need to know if I am just flat out screwed or if maybe, just
Maybe I might have a shot at storing my EVO 3d. I was running meanrom. Everything was running smoothly but I decided to give ViperROM a shot. So I d a wipe, rebooted into recovery and flashed ViperROM. Initially I thought everything had gone according to plan until I realized something was amiss when I attempted to start 4g. 4g wouldn't start. I did some looking into and came to tonclusion that because as far as I could tell because I had been running meanrom when I flashed viper the kernel no longer stock was not compatible with viper. So I started flash image GUI, found stockkernel.zip on my sd card and flashed or so I thought the stock kernel in hopes that after I did then the 4g would work on ViperROM. Well I was mistaken. When the phone rebooted, after the initial HTC screen rather than next seeing the ViperROM boot animation my screen went black. It remained there laughing at me till the phone automatically rebooted and then once again went to a darn black screen. It seems my phone is stuck in an endless loop. HTC screen, black scree reboot, HTC... Ect. I then booted into recovery wiped again and tried to then just reinstall meanrom. Well, according twrp recovery the installation went smoothly but after HTC screen, my phone goes straight to black screen. Ive tried various variations of reinstallations and nothing has worked so far. Am I stuck like this or is there something that can be done. Any pointers or suggestions would be more than appreciated
le?OR am I
Click to expand...
Click to collapse
Your phone is alright and working , dont worry.
..............................................................................
I am assuming you are unlocked via htcdev.com .
Follow the steps:
Copy the img file of the recovery you are using to the fastboot/adb folder (folder which you have used to unlock the bootloader).
1.Now boot your phone in bootloader
2.Select Fastboot and connect to PC.(phone should say "fastboot-usb")
3.now open command prompt and navigate to your fastboot folder.
4.Type "fastboot boot <recovery name>.img". Your recovery should boot now.
5.Wipe everything , and install any ROM you want.
6.Then reboot your phone as normal and your problem should be solved.
7.If you get stuck at HTC screen or that black screen , just open the zip file of the ROM that you've just flashed and copy the boot.img file to your fastboot/adb folder > then boot your phone into bootloader > select fastboot > connect to PC > in command prompt type "fastboot flash boot boot.img" > then reboot.
Hope this helps........
Did you make a nand backup before you flashed vipers rom? Or do what he said ^^^^^^^
Did you look in the meanrom folder on ur SD card. Inside of there is the stock kernel. Second try to flash cleanROM and see if that helps. And if that doesn't work, look for the modifiedsuperwipe.zip. if all else fails..... I had the boot loop a while a go. All I did was flash the modifiedsuperwipe.zip and then flashed the ROM of choice and i was good to go. Hope this helps a lil
I'm stumped
So I did the modified wipe. I thought it was going to be smooth sailing well, I plugged in the phone and went to fast boot tried sending my phone a command line but it hangs on waiting for device. So now I'm stuck wondering wtf. No go on fastboot commands for now that is unless someone has an idea on that. Is there a way to perhaps browse root from recovery and transfer the boot image from my sd card to the folder in needs to. Go to? Or can I mount as a usb storage device and move the boot.img file to where it needs to go from the computer. I'm so desperate to fix this issue without surrendering to defeat and bringing it somewhere for someone else to do it. Hell I probably can't afford it if I have to. Whelp, if you have any thoughts I'm grateful. Thanks for the assistance thus far fellas. When bootloader loads it says I believe loading PG86DIAG.zip no image found if that means any more to any of you. I also tried reinstalling meanrom. I booted into recovery via hold power +. Volume up then choose recovery. Twrp loads. Choose meanrom zip flash image. According to twrp this goes down swell with not a problem but when I boot to system still I get the black screen. It mocks me still.
oh yes. Probably worth mentioning. Today I was working from a bit installation of windows. It was a pain on the as o get the adb drivers workingnet but finally found something called pdapal installed it and it got things squared away or so I thought on the windows drivers side of things. So in device manager there are no errors and it says the android device is working properly now alert symbols over the driver or anything but still can't get the phone to accept fastboot commands.
3ncrypt3d said:
So I did the modified wipe. I thought it was going to be smooth sailing well, I plugged in the phone and went to fast boot tried sending my phone a command line but it hangs on waiting for device. So now I'm stuck wondering wtf. No go on fastboot commands for now that is unless someone has an idea on that. Is there a way to perhaps browse root from recovery and transfer the boot image from my sd card to the folder in needs to. Go to? Or can I mount as a usb storage device and move the boot.img file to where it needs to go from the computer. I'm so desperate to fix this issue without surrendering to defeat and bringing it somewhere for someone else to do it. Hell I probably can't afford it if I have to. Whelp, if you have any thoughts I'm grateful. Thanks for the assistance thus far fellas. When bootloader loads it says I believe loading PG86DIAG.zip no image found if that means any more to any of you. I also tried reinstalling meanrom. I booted into recovery via hold power +. Volume up then choose recovery. Twrp loads. Choose meanrom zip flash image. According to twrp this goes down swell with not a problem but when I boot to system still I get the black screen. It mocks me still.
Click to expand...
Click to collapse
4ext has kernel flashing for hboot 1.5 works good i am no good with hboot i got lucky i got soff in 1.5 look into 4ext its a good recovery
Thanks
I've got twrp flashed fine. However my phone won't respond to commands while in fastboot from the command prompt. It says waiting for device and never responds. Is there a possibility that usb debugging is not working. Is there a way to the? this on from recovery if you needed. I'm not nt intimidated by advanced procedures Im an analyst programmer and am stuck doing super boring things most of the day. I can't believe I'm being thrown a curve ball like this. I'm definitely humbled. Just saying that anything you throw out there Ide be willing to give a shot at this point.
3ncrypt3d said:
I've got twrp flashed fine. However my phone won't respond to commands while in fastboot from the command prompt. It says waiting for device and never responds. Is there a possibility that usb debugging is not working. Is there a way to the? this on from recovery if you needed. I'm not nt intimidated by advanced procedures Im an analyst programmer and am stuck doing super boring things most of the day. I can't believe I'm being thrown a curve ball like this. I'm definitely humbled. Just saying that anything you throw out there Ide be willing to give a shot at this point.
Click to expand...
Click to collapse
could be the abd drivers are not on your pc for your phone the reason i said to get ext4 recovery is you can flash kernels now you still cant do that with twrp but with your phone plunged in, in fastboot go to my computer right click propertys go to hardware tab click device manager and look for a question mark that says android phone if it is their you need the drivers
hope i helped you out
3ncrypt3d said:
I've got twrp flashed fine. However my phone won't respond to commands while in fastboot from the command prompt. It says waiting for device and never responds. Is there a possibility that usb debugging is not working. Is there a way to the? this on from recovery if you needed. I'm not nt intimidated by advanced procedures Im an analyst programmer and am stuck doing super boring things most of the day. I can't believe I'm being thrown a curve ball like this. I'm definitely humbled. Just saying that anything you throw out there Ide be willing to give a shot at this point.
Click to expand...
Click to collapse
Are you sure you are accessing fastboot from bootloader ? By your words, it seems like you are checking fast boot in settings> power
Does the bootloader say fastboot-usb? If not select it and press power.
Sent from my PG86100 using XDA App
Still Trying
Yeah, I'm definitely in fastboot through bootloader. Yes it says fastboot usb. I think despite the fact that it says drivers are installed properly in device manager there might still be some kind of driver issue. I'm away from home and don't have access to. My usual computers? I'm stuck on an installation of windows 7 64bit. Originally I was having issues getting the right drivers installed and so I installed pda net and that seemed to solve the issue in device manager but I'm still having issues. If there's some recovery I could flash which would allow me toove boot.img to the right path manually that might be a way I could solve this. Hell, I'll give anything a try. So that's where I am so far. Any advice on what I might be doing wrong or where I might go from here?
hboot 1.5 s-on
I've got the same specs as you save the rom and kernel. @ itzloltraim.
I did try flashing clockwork mod using rom manager before my phone started having issues but even though rom manager said it flashed when I booted to recovery next twrp was still there. Is there somewhere I can download a flashable zip from? I couldn't find one last time I looked. From what I remember the Dev Site Links to rommanager to get it. If you have a link that would be a help.
Questions
Hboot?
Base?
Have you tried flashing clockworkmod?
Sent from my PG86100 using Tapatalk
iTzLOLtrain said:
Questions
Hboot?
Base?
Have you tried flashing clockworkmod?
Sent from my PG86100 using Tapatalk
Click to expand...
Click to collapse
That plus what is he doing rooting or trying to flash a recovery?
Yea, I have the same problem...
I was running MeanROM4.1 with the dodava kernel. Being an idiot I flashed the new Anthrax kernel and now my phone gives me a black screen. When the phone starts up, theres no lock ring. Ive been trying to flash another kernel but i dont seem to be doing it properly. im using 4ext as recovery.
Im currently performing a Superwipe then factory reset. Ill reply with my findings. Good thing I backed up at MeanROM3.91, but if I cant get my screen to work...shall I assume bricked?
**problem solved. I flashed a kernel using the fastboot method. Someone posted it and it worked fine for me.**
Dear all,
Here is the situation. I decided to root my evo 3d gsm (hboot 1.5++) today, and all went well until I flashed a rom (virtuous). Now whenever I boot on the phone, it shows me this "V" logo and loads for more than 10minutes or so. I can go into my bootloader, but when I attempt to do anything from my clockworkmod recovery, when I press the power button to select different options, I get blank menus and I can attempt nothing. I am an unexperienced user, and can anyone out there who is experience render some assistance? I am at my wits end...
Thanks
Well I'm not too familier with the gsm version... the "V", is that part of the boot animation? and does it just loop over and over? maybe try reflashing clockworkmod and re wipe and install?
netwokz said:
Well I'm not too familier with the gsm version... the "V", is that part of the boot animation? and does it just loop over and over? maybe try reflashing clockworkmod and re wipe and install?
Click to expand...
Click to collapse
The "V" is the part of the boot animation. And the "V" just glows again and again, yeah so i guess it loops. Why I am so worried is because I saw a window of my HTC sense booting to life earlier on, but I saw the words "Unfortunately... has... crashed..." but it was very brief, and after which the animation began again. Is it because I waited for too short a period of time? (around 15 minutes or so) or because it really boot looped? And how do I reflash clockwordmod when I can't access my phone and sd card? Will appreciate your kind help...
I've never had to wait more than 5 minutes for something too boot, and it should really never take longer than that. Can you tell me the steps you took to flash the rom(not to root it). and could you give some more info about your phone? are you s-on or s-off? And what do you mean by blank menus in clockwork mod? Do you know how to boot into your hboot menu? from there you can boot to fastboot and install the recovery from your pc. connect your phone to the pc while in fastboot mode and get your recovery.img file and type the following command from the command line:
Code:
fastboot flash recovery /path/to/<recovery>.img
netwokz said:
I've never had to wait more than 5 minutes for something too boot, and it should really never take longer than that. Can you tell me the steps you took to flash the rom(not to root it). and could you give some more info about your phone? are you s-on or s-off? And what do you mean by blank menus in clockwork mod? Do you know how to boot into your hboot menu? from there you can boot to fastboot and install the recovery from your pc. connect your phone to the pc while in fastboot mode and get your recovery.img file and type the following command from the command line:
Code:
fastboot flash recovery /path/to/<recovery>.img
Click to expand...
Click to collapse
Ok, here is the infomation. I live in Singapore, which is a part of Southeast Asia, my phone is the GSM version with HBoot 1.530007(i cant remember the decimal placing).
I firstly used HTCDEV to unlock my bootloader, which went well, then I went to evohacks to get the conventional rooting method, which went well too. And it all came when I was careless, and I accidentally forgot to wipe the data and cache of my evo before i flashed the rom. And now it gets stuck in the "V" logo loading phase. If the hboot menu is the menu where I have to press the powerbutton and the volume down button then yes. I can also get into my recovery, but the problem is that it shows a blank menu in (clockwordmod specifically), thus rendering whatever me helpless. i have downloaded the PG86IMG.zip and Im waiting for it to finish. So how do I go about solving this matter? This phone is my only asset and I really want to save it...
Blank menu as in for example when I click "Reboot", or "Factory Reset" or perhaps "Restore" in the CWD Recovery, it just shows me a blank menu with the CWD logo in the background, with no options or drop down words or whatsoever. And the sad thing is that I did not make any recoveries at all.... So I plucked my sd card out, and now im waiting to finish downloading the PG86IMG.zip to put on my sd and into my phone, and flash it to revert it back to stock and stuff..... I hope this works
Ok, well as long as you can get to either hboot or recovery you'll be ok. I would recommend flashing 4ext recovery, as it has never failed me and seems to help others. here is the link to it. Download that and pull the recovery.img out and flash that from your pc with the command I gave above. It sounds like you are either pushing the wrong button in the recovery or it might just be messing up for some reason. Is it the touchscreen version of clockworkmod?
netwokz said:
Ok, well as long as you can get to either hboot or recovery you'll be ok. I would recommend flashing 4ext recovery, as it has never failed me and seems to help others. here is the link to it. Download that and pull the recovery.img out and flash that from your pc with the command I gave above. It sounds like you are either pushing the wrong button in the recovery or it might just be messing up for some reason. Is it the touchscreen version of clockworkmod?
Click to expand...
Click to collapse
The recovery is the free version, so it shouldn't be the touch one. May I ask, what do you mean by recovery.img? I emptied my SD card so that I can put the PG86IMG.zip into it later. Any more specific steps you can give? Sorry but Im really a newb in the android world
mrkittyhawk said:
The recovery is the free version, so it shouldn't be the touch one. May I ask, what do you mean by recovery.img? I emptied my SD card so that I can put the PG86IMG.zip into it later. Any more specific steps you can give? Sorry but Im really a newb in the android world
Click to expand...
Click to collapse
The recovery.img is the image that the phone flashes to install the recovery. If you look in the zip I posted in the link you'll see that file in there. the one I posted is the 4ext touch recovery. you can manually flash that file to your phone in case you can't get it to boot(like your case). I would suggest trying the 4ext recovery I linked, or maybe try to boot to recovery again and see if its touch based. Were the menus working when you flashed the virtuous rom, and then it stopped working?
OH stupid me. Whoops. Actually I CAN navigate. Ive been pressing the wrong button all this while. I pressed the power instead of the camera, which is the select button. Whoops. seems like CMD was working after all. sorry...
ok but still, can I just attempt to install the RUU file I downloaded in the CWD menu? Will it work? Will my phone be reverted back to its original unrooted state? I saw someone say it could...
There is something bugging me though. My SD card is now completely empty. Will it have any negative effects on what i do?
I thought something like that was happening, glad you got it sorted. Try to wipe everything and reinstall your virtious rom again first. yes the PG86IMG.zip will return you back to complete stock, recovery and all. So if you do that you might have to re-root all over again.
mrkittyhawk said:
There is something bugging me though. My SD card is now completely empty. Will it have any negative effects on what i do?
Click to expand...
Click to collapse
no it won't.
thank you so much! So since now everything is clean, you recommend another shot at the virtous? I just drag it and put it in my sd card right? Neat! Will go try, if i encounter another problem will come back here. Thanks a lot! It really means a lot to me!
mrkittyhawk said:
thank you so much! So since now everything is clean, you recommend another shot at the virtous? I just drag it and put it in my sd card right? Neat! Will go try, if i encounter another problem will come back here. Thanks a lot! It really means a lot to me!
Click to expand...
Click to collapse
I would recommend trying it before you go back to stock just to re-do it all, but its up to you. yeah if you need more help just come here or pm me. glad you got it working again!
Thank You!
Oh ok! I thought by clearing the data using recovery on the phone and sd will render the root useless. Will try redoing it again. Will update you on the further details
Many thanks!
mrkittyhawk said:
Oh ok! I thought by clearing the data using recovery on the phone and sd will render the root useless. Will try redoing it again. Will update you on the further details
Many thanks!
Click to expand...
Click to collapse
If you only wipe /data/ you will still have root. sdcard doesn't matter.
mrkittyhawk said:
Oh ok! I thought by clearing the data using recovery on the phone and sd will render the root useless. Will try redoing it again. Will update you on the further details
Many thanks!
Click to expand...
Click to collapse
So theoretically flashing the ROM shouldn't take more than... around 15 minutes?
correct
Its now 10 minutes and so far my phone had made 2 major vibrations. So if this doesn't work, can i just wipe all the data again, put the PG86IMG.zip in my phone, go to recovery to install it, and then I just press reboot right?
mrkittyhawk said:
Its now 10 minutes and so far my phone had made 2 major vibrations. So if this doesn't work, can i just wipe all the data again, put the PG86IMG.zip in my phone, go to recovery to install it, and then I just press reboot right?
Click to expand...
Click to collapse
Sometimes sense roms can take a bit, but if its vibrating than it should be working. if not just put the PG86IMG.zip on the root of your sdcard and boot into hboot and let it do its thing. no need to wipe data for that.
Yesterday I was running Viper's ROM and it worked flawlessly. A friend added some ROM manager on my phone, and it's been screwed up ever since. I tried flashing to a new ROM, no realizing it was Clockwork recovery. I was able to get Scott ROM to somewhat boot but it restarts randomly.
Viper ROM says to make sure you don't use Clockwork recovery. How can I ensure that is no longer on my phone? Secondly, with S-ON can I get Armona or another recovery tool?
Help.. what can I do to get the phone back to normal?
Greatly appreciate any help to restore my phone back.
Someone correct me if I'm wrong but I think you can flash amon ra through bootloader and reinstall ROM from there.
Sent from my ASUS Transformer Pad TF700T using xda premium
get the RA 3.15 recovery image file. rename to recovery.img and move it to where fastboot is on your PC assuming you have the sdk/tools/drivers configured like you would for using adb. reboot to bootloader for fastboot-usb when your usb cord is plugged in. the command is "fastboot flash recovery recovery.img" without the quotes and you'll be back in business
pmgreen said:
Yesterday I was running Viper's ROM and it worked flawlessly. A friend added some ROM manager on my phone, and it's been screwed up ever since. I tried flashing to a new ROM, no realizing it was Clockwork recovery. I was able to get Scott ROM to somewhat boot but it restarts randomly.
Viper ROM says to make sure you don't use Clockwork recovery. How can I ensure that is no longer on my phone? Secondly, with S-ON can I get Armona or another recovery tool?
Help.. what can I do to get the phone back to normal?
Greatly appreciate any help to restore my phone back.
Click to expand...
Click to collapse
Fastboot flash this to get amonra recovery back. Make sure you WIPE before you set up your next rom for no issues
At work they shut off the ability to charge via USB. Found an alt source.
The phone now boots up, but randomly restarts.
rezokrazy22 said:
Fastboot flash this to get amonra recovery back. Make sure you WIPE before you set up your next rom for no issues
Click to expand...
Click to collapse
Want to make sure have the steps right.
Have a macbook, does this need to be done on a pc?
In recovery mount USB.
Put the file on the root (not in a folder)
Get to the fastboot menu and execute.
Please correct
Not sure if you need it or not, but I have a zip file that contains AmonRa 3.15. You can install it as a PH98IMG in bootloader. It is what I use to re-install AmonRa when needed. Apparently, I do not have enough posts to attach it so PM me your e-mail address if you would like me to send it to you.
pmgreen, it looks like Roman and the guys above took good care of you already but if you're still having problems I would be glad to do a remote session and help you get it straightened out.
Unfortunately friends can wreak havoc on your phone with things like this, but we will make sure you get all fixed up.
CharliesTheMan said:
pmgreen, it looks like Roman and the guys above took good care of you already but if you're still having problems I would be glad to do a remote session and help you get it straightened out.
Unfortunately friends can wreak havoc on your phone with things like this, but we will make sure you get all fixed up.
Click to expand...
Click to collapse
CharliesTheMan, thanks for the offer I greatly appreciate it. Thought the battery issue was resolved, but now it doesn't want to turn back on
Friend meant well, but lesson learned.
Will definitely take you up on the generous offer if there isn't success.
I took the file from Roman but got the following error: main version is older update fail rezound
On a MAC I tried to fastboot using the recovery file, but getting an error "Waiting on device to respond"
Silly question, I used the MAC to root a Nexus 7 and used a different PC for the rezound
Do you need to use the same computer to ABD?
Good news, I'm up and running. Flashed SetMainVersionLOW.zip then the recovery from Roman.
When I go into recovery no longer see that hat.
Thanks so much for your help.. really appreciate it and hope I help out some time too
Glad to hear that you are back up and running!
So I recently installed Nightmare Sense v1.3. I used the latest CWM, and wiped/factory reset, wiped cache and wiped dalvik. I cannot get past the boot screen. I tried reflashing but that didn't help. Someone please help, the thread doesn't contain clear instructions on how to install so I kinda went on my own here. Thanks.
DarthDerron said:
So I recently installed Nightmare Sense v1.3. I used the latest CWM, and wiped/factory reset, wiped cache and wiped dalvik. I cannot get past the boot screen. I tried reflashing but that didn't help. Someone please help, the thread doesn't contain clear instructions on how to install so I kinda went on my own here. Thanks.
Click to expand...
Click to collapse
I had a hard time at first to. Before you try again, go to the thread and download the newer 1.4 version. It is Somewhere around page 162 I think. Then make sure you wipe all partitions before installing the zip in recovery. Good Luck
I'm currently having the exact same problem.
The strangest thing is - the phone was booting just fine yesterday.
I had Nightmare Sense 4.0 v1.2 on the phone and noticed that if the battery power got somewhat low it would sometimes shut the whole phone off (crash it off). I'd have to hold the power button to turn it back of, of course. Then after a week or so the phone would seemingly freeze at the HTC boot screen. I'd then have to pull the battery and then turn the phone back on, at which point it would boot up normally. Then today (well, I guess last night, technically) the phone would no longer move past the boot screen.
I can still get into CWM Recovery (v5.0.2.7) and do all of the thing I could do before, but doing complete wipes of everything, trying to load a new ROM, etc, do nothing to help. Plus, CWM is constantly telling me "E: Can't Mount /cache/recovery/command" "log" "open log" "mount log" "open log", which I don't remember it saying before.
Johnny Two Tone said:
I'm currently having the exact same problem.
The strangest thing is - the phone was booting just fine yesterday.
I had Nightmare Sense 4.0 v1.2 on the phone and noticed that if the battery power got somewhat low it would sometimes shut the whole phone off (crash it off). I'd have to hold the power button to turn it back of, of course. Then after a week or so the phone would seemingly freeze at the HTC boot screen. I'd then have to pull the battery and then turn the phone back on, at which point it would boot up normally. Then today (well, I guess last night, technically) the phone would no longer move past the boot screen.
I can still get into CWM Recovery (v5.0.2.7) and do all of the thing I could do before, but doing complete wipes of everything, trying to load a new ROM, etc, do nothing to help. Plus, CWM is constantly telling me "E: Can't Mount /cache/recovery/command" "log" "open log" "mount log" "open log", which I don't remember it saying before.
Click to expand...
Click to collapse
I was able to load a different rom in the meantime. Im not sure what this problem is . Hopefully it gets fixed soon.
Johnny Two Tone said:
I'm currently having the exact same problem.
The strangest thing is - the phone was booting just fine yesterday.
I had Nightmare Sense 4.0 v1.2 on the phone and noticed that if the battery power got somewhat low it would sometimes shut the whole phone off (crash it off). I'd have to hold the power button to turn it back of, of course. Then after a week or so the phone would seemingly freeze at the HTC boot screen. I'd then have to pull the battery and then turn the phone back on, at which point it would boot up normally. Then today (well, I guess last night, technically) the phone would no longer move past the boot screen.
I can still get into CWM Recovery (v5.0.2.7) and do all of the thing I could do before, but doing complete wipes of everything, trying to load a new ROM, etc, do nothing to help. Plus, CWM is constantly telling me "E: Can't Mount /cache/recovery/command" "log" "open log" "mount log" "open log", which I don't remember it saying before.
Click to expand...
Click to collapse
Just flash a RUU for your carrier, assuming you know the directions already. If not, there are guides that gives you step-by-step directions on how to flash it.
RUUs fixes all software-related issues. From there, just flash a new recovery (I recommend 4Ext), and then flash a ROM.
DarthDerron said:
I was able to load a different rom in the meantime. Im not sure what this problem is . Hopefully it gets fixed soon.
Click to expand...
Click to collapse
Mine phone won't even let me install a different ROM.
I realized, when trying to wipe data/factory reset that it says "E:format_volume: make_extf4fs failed on /dev/block/mmcblk0p31" (it says the same thing for 30 as well).
In other words it almost seems like the ROM corrupted the recovery tool or something. I can't format anything and therefore can't change anything. The phone is dead-locked with a broken Nightmare Sense 4.0 v1.3 ROM on it that won't move past the boot screen.
---------- Post added at 03:22 PM ---------- Previous post was at 03:17 PM ----------
Keylogger_0 said:
Just flash a RUU for your carrier, assuming you know the directions already. If not, there are guides that gives you step-by-step directions on how to flash it.
RUUs fixes all software-related issues. From there, just flash a new recovery (I recommend 4Ext), and then flash a ROM.
Click to expand...
Click to collapse
I will do this now, assuming I CAN flash an RUU when the recovery won't let me format.
Johnny Two Tone said:
Mine phone won't even let me install a different ROM.
I realized, when trying to wipe data/factory reset that it says "E:format_volume: make_extf4fs failed on /dev/block/mmcblk0p31" (it says the same thing for 30 as well).
In other words it almost seems like the ROM corrupted the recovery tool or something. I can't format anything and therefore can't change anything. The phone is dead-locked with a broken Nightmare Sense 4.0 v1.3 ROM on it that won't move past the boot screen.
---------- Post added at 03:22 PM ---------- Previous post was at 03:17 PM ----------
I will do this now, assuming I CAN flash an RUU when the recovery won't let me format.
Click to expand...
Click to collapse
There's no need to format anything, and have you even read the instructions? You DO NOT flash this in recovery. Please read the instructions in its entirety before proceeding!
Sent from my HTC Ruby using xda app-developers app
Keylogger_0 said:
There's no need to format anything, and have you even read the instructions? You DO NOT flash this in recovery. Please read the instructions in its entirety before proceeding!
Click to expand...
Click to collapse
No worries, friend.
I used the RUU and got things worked out but MY GOD does it take a long time to go from where I had the problem back to where the phone was directly before said problem. Use the RUU, re-update the phone, re-unlock the bootloader, re-root the phone, re-install a recovery tool, re-install ROM of choice, re-install ALL software and saved info, etc.
Between all of the work and the loading we're talking hours.
Johnny Two Tone said:
No worries, friend.
I used the RUU and got things worked out but MY GOD does it take a long time to go from where I had the problem back to where the phone was directly before said problem. Use the RUU, re-update the phone, re-unlock the bootloader, re-root the phone, re-install a recovery tool, re-install ROM of choice, re-install ALL software and saved info, etc.
Between all of the work and the loading we're talking hours.
Click to expand...
Click to collapse
That's why we have S-Off phones. Much quicker than doing all that
Johnny Two Tone said:
No worries, friend.
I used the RUU and got things worked out but MY GOD does it take a long time to go from where I had the problem back to where the phone was directly before said problem. Use the RUU, re-update the phone, re-unlock the bootloader, re-root the phone, re-install a recovery tool, re-install ROM of choice, re-install ALL software and saved info, etc.
Between all of the work and the loading we're talking hours.
Click to expand...
Click to collapse
Indeed. S-Off is your friend
If you had S-Off, you could've used my tool which would cut down the time needed to only 10-15 minutes.
Keylogger_0 said:
Indeed. S-Off is your friend
If you had S-Off, you could've used my tool which would cut down the time needed to only 10-15 minutes.
Click to expand...
Click to collapse
Well, now ya' tell me!
Ya, my phone had (has) S-Off.
Hmm, well I solved one problem only to gain another MUCH worse problem.
After installing Nightmare Sense 4 v1.4 I now have zero sound of any kind. No phone speaker, no external speaker, no headphone sound, the phone does ring or give a dial tone, I can't hear people talking even though I can connect to them, etc.
Time to re-install yet again!