i just got the rogers version of the htc evo 3d and i want to unlock it so it works with any carrier. How do I do this? Whats the best way to do this and is it free or will i have to pay? Any help is appreciated thanks.
You should try your luck in the GSM section
Please use the Q&A Forum for questions Thanks
Moving to Q&A
I have a Rogers Evo, unlocked, go here: http://www.mobifree.ca/
costs $10, just need to provide them your IMEI.
Got mine in a few hours.
*edit
holy necrobump
CellUnlocker worked for me
I have a Rogers Evo 3D too and I got it unlocked through cellunlocker dot net for ~$8. Just as amace04 did, I provided my IMEI and within an hour and a half they sent me the code which it seemed to work without a hitch (haven't had a chance to test the data side of it). I will pass back here and update this, after I test it properly in a few weeks.
As promised I am checking back in. I am in Jamaica using the phone which was unlocked from Rogers. So far I have used it with SIM cards from 2 mobile networks here and everything works perfectly (both voice and data). My only complaint which has nothing to do with phone or unlocking service is that 3G coverage outside of the major cities is sparse.
Sent from my HTC EVO 3D X515a using XDA App
This worked for me, and it was free. Apparently for GSM (with s-off) models only.
Wish I owned a GSM device when I'm out of the us. Is the GSM model capable of working in the U.S?
Via My HTC Evo 3D On The Now Network From Sprint.
spywhite said:
This worked for me, and it was free. Apparently for GSM (with s-off) models only.
Click to expand...
Click to collapse
Can you please explain to me what is "s-off"?
Can't be unlocked all HTC EVO 3D? Where or how can i see if it's s-off or not?
Thanks
spywhite said:
This worked for me, and it was free. Apparently for GSM (with s-off) models only.
Click to expand...
Click to collapse
THANK YOU!
Worked on HTC EVO3D SHOOTERU ROGERS in CANADA !!! that was revolutionary unlocked and rooted (but did not carrier unlock with the 10$ internet unlock codeā¦) so YAY thanks AGAIN!:laugh:
Rydah805 said:
Wish I owned a GSM device when I'm out of the us. Is the GSM model capable of working in the U.S?
Via My HTC Evo 3D On The Now Network From Sprint.
Click to expand...
Click to collapse
Yes it does. I'm pretty sure it runs on AT&T?
Not sure exactly what carrier..
Rydah805 said:
Wish I owned a GSM device when I'm out of the us. Is the GSM model capable of working in the U.S?
Via My HTC Evo 3D On The Now Network From Sprint.
Click to expand...
Click to collapse
Yup under AT&T and any other GSM Network.. If you buy a ROGERS piece.. Don't forget the unlocking first
I saw some link with unlock codes for $5.. will post if i find them..
spywhite said:
This worked for me, and it was free. Apparently for GSM (with s-off) models only.
Click to expand...
Click to collapse
It didn't work for me, I got the file and received error mesages when I chose the simlock option
You must s-off your phone.
via xda app
sieempi said:
You must s-off your phone.
via xda app
Click to expand...
Click to collapse
Hmmm I thought it was S-OFF because I was rooted, I was tired when I rooted my phone (Did Taxes earlier that night).
I now notice that it S-ON. How do you S-OFF? Do you need a wire (Like I remember flashing the firmware on my Nintendo DS having to physically complete a circuit I suppose enabled write access)?
http://www.addictivetips.com/mobile/how-to-gain-s-off-on-htc-evo-3d-with-revolutionary/
That method doesn't seem to need a wire, but I already have Revolutionary and see no option for S-OFF. It also mentions a beta key, but I never needed one to download Revolutionary, TBH I don't even remember where I got it from.
mpg187 said:
Hmmm I thought it was S-OFF because I was rooted, I was tired when I rooted my phone (Did Taxes earlier that night).
I now notice that it S-ON. How do you S-OFF? Do you need a wire (Like I remember flashing the firmware on my Nintendo DS having to physically complete a circuit I suppose enabled write access)?
http://www.addictivetips.com/mobile/how-to-gain-s-off-on-htc-evo-3d-with-revolutionary/
That method doesn't seem to need a wire, but I already have Revolutionary and see no option for S-OFF. It also mentions a beta key, but I never needed one to download Revolutionary, TBH I don't even remember where I got it from.
Click to expand...
Click to collapse
Ramjet's guide is the easiest to follow to get s-off. http://forum.xda-developers.com/showthread.php?t=1889438
That says Spring and Virgin Mobile only, I'm with Rogers
EDIT: http://forum.xda-developers.com/showthread.php?t=1761483 That might be what I want
My 3d evo is flash to pager plus right now will it be easy for me to flash it verizon prepaid and would i have to change a lot or little everything is working
It will be just as easy/hard as it was to flash to your current carrier. If you don't know how to do it, I suggest you find someone who does.
Sorry for this question if it's been asked already. I see the thread on flashing evo3d to VM, but not other way.
Is there an easy way to flash a Virgin Mobile HTC Evo V to Sprint? I'm wondering if it is as easy as running the sprint RUU flash.
i'm happy with a rooted stock evo3d ROM with Wimax, is that possible?
There is a fire sale for the Evo V, so this looks viable to replace my OG EVO 4G.
Thanks.
edit: my bad,,, I'm reviewing the flash to VM thread and I forget that is will require a donor phone and the whole bunch of stuff. So i don't think this is as easy as running the RUU!!!
Hello all.
I've searched through forums here on XDA as well as other sites on internet for an answer to this and nothing so far. I own the HTC Evo V 4G (Evo 3D for Virgin Mobile) and I love the phone, especially after flashing the new radio firmware and MidnightRom. I just found out though that I have come up on military assignment to Japan. I know the mobile carrier au KDDI has the same phone in Japan (HTC EVO 3D ISW12HT) and that they have WiMax coverage in the area I'm going. My question is: is there a way to flash this phone to operate on au by KDDI networks? I've researched the Japanese flavor of this phone and as far as I can tell it is the same phone spec-wise and both can operate on the same CDMA bands. I assume I would need to flash new radios for KDDI, but would I need to flash a stock KDDI RUU.executive altogether? If I had to flash to KDDI stock ROM, could it be flashed with a custom ROM after? The specs for my phone configuration are below:
Software: MidnightRom 1.3.9
Model: PG86100
Android: 4.0.3
Kernel: 3.0.52-ck1-Anthrax
Baseband: 1.09.00.0706
Build: 1.13.652.2_R2
PRI: 153_144
PRL: 61009
HBOOT: 1.57.000 Stock (Locked)
Recovery: TWRP 1.1.1
S-OFF: JBear method
I know how to and have flashed almost everything on this phone when given good instructions. The only thing I haven't flashed on this is the Hboot but I know how to do that as well and should have no issues now that I'm on custom ROM. Any help would be greatly appreciated and please, before you go and say it can't be done have some proof to back it up. I have seen this phone flashed to almost every CDMA carrier there is. The only thing I know of that might be an issue is if the US and Japanese KDDI has different partitions or mount points for the phones internal partitions, otherwise the phone is pretty resilient for what is supposed to be a carrier "locked" phone. Thanks in advance for any help!
fn_noobee said:
I just found out though that I have come up on military assignment to Japan.
Click to expand...
Click to collapse
Ah cool, I'm hoping my first assignment will be in Japan.
fn_noobee said:
I've searched through forums here on XDA as well as other sites on internet for an answer to this and nothing so far.
Click to expand...
Click to collapse
Well, there's only two things I can think of. The first isn't very likely:
au KDDI may be able to flash phones from other carriers. My current service (MetroPCS) allows for that. They'll reprogram the phone to work on their service. I'm really not sure if au KDDI does that.
The next thing I can think of:
Buy a phone from them (a cheap one) and have it activated. Then use it as a donor phone to swap the ESN/MEID on to your Evo 3D. I think Boost Mobile users and Virgin Mobile users do this to flash Sprint Evo 3D's on their service. Setting all legality aside, I think it would definitely work since they are both the same model and both CDMA. Although, you would need to obtain au KDDI's programming information & PRL somehow, which probably exists somewhere on the internet (ie the MMS settings, data settings, etc.). I'm sure you could even flash any ROM you wanted to.
It's not too hard of a concept, there are similar guides for other services, for example this:
http://androidforums.com/evo-4g-all-things-root/460035-evo-4g-boost-mobile-guide-evo-3d.html
Maybe you could be the first to come up with a solution?
Thanks for the helpful and informative reply. I have seen a tutorial similar to the one you linked with a way to flash the HTC Evo V 4G to Straight Talk (basically prepaid Sprint network to prepaid Verizon network) by using a fairly inexpensive 3G capable donor phone for the ESN/MEID. The only downside was that the phone lost 4G (WiMax) capability and they were some tweaks/mods to get MMS working. I believe SMS was functional. If I did something like this, I would really like to keep the WiMax capabilities of this phone as even though I don't have WiMax here where I live, WiMax is available where I'm going (apparently WiMax has really expanded in Japan in comparison to the US). I will see what I can work out. Hopefully au KDDI offers phone flashing services, but I have read they are more stringent in their policies of locking/unlocking phones than here in the States. If someone knows of a tutorial somewhere on the net or has done this before and can post a tutorial I'd greatly appreciate it
Few days ago i found a HTC EVO 4G Sprint I found out its been flashed to MetroPCS and rooted but it keeps turning off and vibrating 3 times then staying black screen maybe is missing some files since i found it with no sd card i tried putting a sd card but it wont read it. So my question is there away anyone can help me set it back to stock step by step. Thanks in advanced.
Here is some info i could get before it reboots
SUPERSONIC EVT3 SHIP S-ON (use to say S-OFF but not anymore)
HBOOT-2.10.0001
MICROP-041f
TOUCH PANEL-ATMEL224_16ab
RADIO-2.15.00.11.19
Android Version
2.2
Baseband version
2.15.00.11.19
Kernel Version
2.6.32.27-netarchy-toastmod-4.3.2-cfs-nosbc-havs-less
Build Number
MetroDroid v2.2
Software number
3.70.651.1
Browser version
WebKit3.1
PRI Version
1.90_003
PRL Version
02004
You need to go to the EVO 4G forum. http://forum.xda-developers.com/htc-evo-4g
The EVO View 4G is a 7" tablet made by HTC for Sprint. http://reviews.cnet.com/tablets/htc-evo-view-4g/4505-3126_7-34555254.html
It is a bit confusing for Sprint's line of HTC devices, much like Verizon's Droid line, where they use a similar naming convention.
There's the EVO 4G, the 4.3" smartphone.
Then there's the EVO Shift 4G, a smartphone with a physical keyboard.
Then there's the EVO View 4G, a tablet based on the HTC Flyer (which is the first device mentioned in this forum's title).
Then there's the EVO 4G LTE, a smartphone based on the HTC One X but modified to be the successor to the EVO 4G.