My device isnt recognized in samsung kies 2.0?
Sent from my YP-G70 using xda premium
hasser964 said:
My device isnt recognized in samsung kies 2.0?
Sent from my YP-G70 using xda premium
Click to expand...
Click to collapse
Did you try another usb port? Also, make sure that your player is in Kies mode instead of "mass storage" or "media player".
p34c3m4k3r said:
Did you try another usb port? Also, make sure that your player is in Kies mode instead of "mass storage" or "media player".
Click to expand...
Click to collapse
you must do that.
p34c3m4k3r said:
Did you try another usb port? Also, make sure that your player is in Kies mode instead of "mass storage" or "media player".
Click to expand...
Click to collapse
How do i put it in kies mode?
Sent from my YP-G70 using xda premium
I believe you have to go into Settings > Wireless and Network > USB Settings and chose "ask on connection" then plug it in.
Galaxy S WIFI 4.0 not recognized in Kies
Hi to all the community
I have here one Galaxy S WiFi 4.0 model YP-G1 and I have got exactly the same problem, the Galaxy S WiFi 4.0 is not found in Kies, while the drivers have been correctly installed and the device, if connected as mass storage, is perfectly detected.
Today, thanks for your hint I've R.T.F.M and I had the confirmation of what RValentinF says
From the manual
How To Connect with Samsung Kies
1) Ensure that Samsung Kies is installed on your PC.
You can download the program from the Samsung website samsung.com/kies
2) In Idle mode, open the application list and select
Settings → Wireless and network → USB settings →
Samsung Kies.
3) Press the Home key to return to Idle mode.
Thank you for the tip
Cor
New update none of the options show up, my galaxy says its connected but i cannot look at it through kies or even create music playlists.
Sent from my YP-G70 using xda premium
hasser964 said:
New update none of the options show up, my galaxy says its connected but i cannot look at it through kies or even create music playlists.
Sent from my YP-G70 using xda premium
Click to expand...
Click to collapse
had the same problem solved it by repeatedly connecting and reconnecting cord from phone...kies was trying to recognize it each time.
Mr601 said:
had the same problem solved it by repeatedly connecting and reconnecting cord from phone...kies was trying to recognize it each time.
Click to expand...
Click to collapse
Didnt work i cant see any options or even make a playlist
Sent from my YP-G70 using xda premium
I have same problem, someone told me it is because kies doesn't work with rooted devices. I don't care, as long as there is no update to be downloaded.
solution
Thought I would post this here in case anyone was having any trouble getting the Galaxy Player 4.0 (YP-G1) to connect to Kies using Windows (I'm on 7, 32bit). It was for a Samsung phone model but it works for the Player also.
http://www.computing.net/answers/win...11.html#postfp
matthewtommasi December 31, 2010 at 20:56:35 Pacific
Here are the instructions on connecting your Samsung Wave GT-S8500 phone to Kies.
1. On the Windows PC, close the Kies program
2. Disconnect phone from PC
3. On phone, select Samsung Kies under Settings > Wireless&Network > USB > Samsung Kies
4. On phone, go to apps > running > select 'end all applications'
5. THEN Connect phone to PC (I am running Windows 7 64 Bit)
7. Windows will automatically install MTP driver and opens up its own window to manipulate the contents of the phone
8. Now start Kies --> it will now recognize the phone
Related
Hi :
I am having a problem with my Galaxy ACE. Every time i connect it to the computer, i get the 'USB Device not recognized' error message.
However, the phone does charge, either connected via USB or at the charger.
I've already tried on different computers, with different cables, both on Windows 7 and XP, and with KIES installed and not installed.
On some pages, i found that the problem was solved by changing USB and UART to PDA instead of MODEM in the PhoneUtil menu. And that the PhoneUtil menu is accessed by pressing *#7284# . When i press that on my ACE, i get a ServiceMode menu that seems to make diagnostics, but don't let change anything to PDA or MODEM.
I still have not tried if ODIN recognizes it... i will try later, but any help will be highly appreciated.
sjrm said:
Hi :
I am having a problem with my Galaxy ACE. Every time i connect it to the computer, i get the 'USB Device not recognized' error message.
However, the phone does charge, either connected via USB or at the charger.
I've already tried on different computers, with different cables, both on Windows 7 and XP, and with KIES installed and not installed.
On some pages, i found that the problem was solved by changing USB and UART to PDA instead of MODEM in the PhoneUtil menu. And that the PhoneUtil menu is accessed by pressing *#7284# . When i press that on my ACE, i get a ServiceMode menu that seems to make diagnostics, but don't let change anything to PDA or MODEM.
I still have not tried if ODIN recognizes it... i will try later, but any help will be highly appreciated.
Click to expand...
Click to collapse
I had this problem too. Turns out I didn't have the driver for the phone.
I use Linux on a daily basis, and totally forgot that Windows needs driver software for most of its hardware.
Sent from my GT-S5830
neither ODIN
neither ODIN is recognizing the phone... what else can i do ? any help, plz ?
Give it at service center.
Sent from Galaxy Ace GT-S5830 using Grif's Cyanogenmod & allinone ram script.
Dont jus say thanks, use d 'THANKS' button. [XDA RULE]
What do you need to connect to the PC for?
Make sure USB debugging is off:
Settings-Applications-Development-USB Debugging
Connect to PC, if you still get the message download and install the phones drivers from the Samsung website.
Hi :
I need the USB connection for :
1. Use the USB tetherig to connect my laptop to internet using cell phone data plan
2. Read the SD Card sometimes
I installed CWM4 on the phone.. and flash a custom ROM CM7, believing this was a software issue.. but problem remains the same.
I will try to leave the phone to service next week. But as i had flashed it, i¿m not sure if the provider will accept it as warranty.
Are you using the original USB cable?
Sent from my GT-S5830 using XDA Premium App
-SGA- said:
Are you using the original USB cable?
Sent from my GT-S5830 using XDA Premium App
Click to expand...
Click to collapse
Yes.. i have used the original, and also two other different cables
I am traveling this week, i will try to take the phone to service next week
My galaxy tab 10.1 is on 3.2 honeycomb official. Its not rooted and its 3g version
My tab would not connect, i have searched for many forms, i could not find the solutions.I have done factory reset twice and have reinstalled kies twice also. My problem still persist. When i connect my tab to my laptop which is running on Windows 7. Three thing happens
1. Some time it will show mtp initializing and then it shows usb connected (mtp connected). No where is galaxy folder on my computer is found. When i go to devices and printer. No galaxy tab icon is shown.
2.Some times, galaxy tab charges only, there is no mtp instializing like 1 scenario etc
3. Nothing will happens.No mtp instializing or no charging
Lastly i have tried on my destop computer and another laptop but the problem still persist
Help would be appreciated.
I would backup my files and factory reset the tab. Should help.
i have done factory reset twice
Make sure debugging is unchecked.. What version of windows are you running?
I find that my tablet will not recognize on XP or Window 7 since I have owned it. (Google I/O bought in July of last year) Once I installed CM9 it would then be recognized through Macbook Pro Android transfer.. (something like that. I sold the Macbook awhile back) I resort to Dropbox.. Its a *****.. But I don't complain and I stream most of my files anyway...
ammad53 said:
My galaxy tab 10.1 is on 3.2 honeycomb official. Its not rooted and its 3g version
My tab would not connect, i have searched for many forms, i could not find the solutions.I have done factory reset twice and have reinstalled kies twice also. My problem still persist. When i connect my tab to my laptop which is running on Windows 7. Three thing happens
1. Some time it will show mtp initializing and then it shows usb connected (mtp connected). No where is galaxy folder on my computer is found. When i go to devices and printer. No galaxy tab icon is shown.
2.Some times, galaxy tab charges only, there is no mtp instializing like 1 scenario etc
3. Nothing will happens.No mtp instializing or no charging
Lastly i have tried on my destop computer and another laptop but the problem still persist
Help would be appreciated.
Click to expand...
Click to collapse
I often connect my tablet to my Win7 PC so I can copy TV shows from Media Center to the tablet. Sometimes the PC doesn't recognise the tablet unless I power down the tablet and turn it back on again. No idea why though.
follow this
download samsung 7510 usb drive, then download kies and last download windows media 11. if your xp its not original, follow some tutorial on youtube about how to install windows media player 11.
i has this issue with windows xp few days ago..
z31k said:
Make sure debugging is unchecked.. What version of windows are you running?
I find that my tablet will not recognize on XP or Window 7 since I have owned it. (Google I/O bought in July of last year) Once I installed CM9 it would then be recognized through Macbook Pro Android transfer.. (something like that. I sold the Macbook awhile back) I resort to Dropbox.. Its a *****.. But I don't complain and I stream most of my files anyway...
Click to expand...
Click to collapse
if you can't connect to a pc, then how were you able to install cm9?
mawells787 said:
if you can't connect to a pc, then how were you able to install cm9?
Click to expand...
Click to collapse
Actually you can. I don't know how he did it but if you want to know here's what I did.
Go here: http://forum.xda-developers.com/showthread.php?p=15693193.
You can root through an update.zip, flashed from the stock recovery (at least for the 3g version). After that install rom manager and flash cwm. Finally download cm9 or aokp or everything else you want and flash away!
Btw, I have no problem connecting to PC. I just did it that way.
Sent from my amazing 10.1 galaxy tab
PC recognizes the tablet but...
The pc recognizes my tablet, but even after it says safe to use, the tablet never shows up under my computer to transfer files. Any suggestions?
Dominus357 said:
The pc recognizes my tablet, but even after it says safe to use, the tablet never shows up under my computer to transfer files. Any suggestions?
Click to expand...
Click to collapse
Do you have MTP enabled under storage > USB computer connection?
Same Problem
ammad53 said:
My galaxy tab 10.1 is on 3.2 honeycomb official. Its not rooted and its 3g version
My tab would not connect, i have searched for many forms, i could not find the solutions.I have done factory reset twice and have reinstalled kies twice also. My problem still persist. When i connect my tab to my laptop which is running on Windows 7. Three thing happens
1. Some time it will show mtp initializing and then it shows usb connected (mtp connected). No where is galaxy folder on my computer is found. When i go to devices and printer. No galaxy tab icon is shown.
2.Some times, galaxy tab charges only, there is no mtp instializing like 1 scenario etc
3. Nothing will happens.No mtp instializing or no charging
Lastly i have tried on my destop computer and another laptop but the problem still persist
Help would be appreciated.
Click to expand...
Click to collapse
I bought a new Samsung Galaxy Tab GT-P7500 yesterday, unboxed it and when i connected it to my laptop for the first time, it showed this problem.. When i connect it to my laptop, it says MTP Initialization, with a message on my laptop "USB Device not recognised" & a 'X' on the battery of my tablet.
I have tried to reinstall the usb drivers & kies several times, but still i am having this problem.. i have bought a new one and not able to use it for 2 days now.. feeling very sad.... Please Help....!!
deepakgupta said:
I bought a new Samsung Galaxy Tab GT-P7500 yesterday, unboxed it and when i connected it to my laptop for the first time, it showed this problem.. When i connect it to my laptop, it says MTP Initialization, with a message on my laptop "USB Device not recognised" & a 'X' on the battery of my tablet.
I have tried to reinstall the usb drivers & kies several times, but still i am having this problem.. i have bought a new one and not able to use it for 2 days now.. feeling very sad.... Please Help....!!
Click to expand...
Click to collapse
XDA is no longer worth my time.
TimOster said:
Read the Kies information on Sammy's site. Make sure you have the settings as they tell you. You can make the tab act like this if USB Debugging is turned on for instance.
Click to expand...
Click to collapse
Thanks for your advice, but i have done everything right as descibed in manuals, but still i am unable to connect my tab to my laptop, as usb connection is the only way to connect, i am feeling very disturbed.... Please help......!!
Sent from my GT-P7500 using xda app-developers app
Problem with computer not seeing phone
deepakgupta said:
Thanks for your advice, but i have done everything right as descibed in manuals, but still i am unable to connect my tab to my laptop, as usb connection is the only way to connect, i am feeling very disturbed.... Please help......!!
Sent from my GT-P7500 using xda app-developers app
Click to expand...
Click to collapse
I had problem with my phone not being seen by my computer, I tried almost everything I read on these forums,
and nothing work, uninstalled drivers, changed settings on my phone, still nothing, then at last I change the setting
by dialing *#7284# (phone utility) made sure UART was set to PDA, USB set to PDA then Qualcomm USB Settings set to MTP,
now my computer sees my phone, I hope this will help others, it worked on mine, I have a Sprint Galaxy Note 2 flashed to Page plus,
with the help of Viper32, I get 3g service, pic messaging etc....
Sorry if this question is already asked, but I searched the forums and could not find it.
But I have a problem/challenge with flashing a bootloader using Odin.
I have the following:
Galaxy Tab P7510, rooted and Galaxy Task13 rom flashed (I did this before I got a Windows 8 OS)
Laptop running Windows 8
Odin 1.85
Installed USB drivers (I think)
I wanted to go to the JellyBean rom. So I looked at the following thread:
[ROM][P75xx][JB][4.2.1] CyanogenMod 10.1 Nightly Discussions (http://forum.xda-developers.com/showthread.php?t=2074202)
I did the following:
- I flashed updated CWM using Mobile Odin
- Then I downloaded the bootloader from the thread.
- I downloaded the USB drivers from the following page: http://wiki.cyanogenmod.org/w/Install_CM_for_p4wifi
- I tried to install these downloaded drivers, but it gave me some problems with compatibility using windows 8, I got a option to install it using a "compatibility mode". I choose this option and the USB driver seemed to install correctly (I got the installation and could install it without any shown problems/errors).
- I opened Odin3-v1.85
- I powered off the Samsung Galaxy Tab 10.1 and connected the USB adapter to the computer but not to the Samsung Galaxy Tab 10.1
- I booted the Samsung Galaxy Tab 10.1 into download mode by holding down Vol Down while connecting via USB
(according the instructions from here http://wiki.cyanogenmod.org/w/Install_CM_for_p4wifi)
Here the problem starts, I cant seem to connect the Tab with the USB. At least if I look at the Galaxy Tab I continuously have the message "connect USB cable". If I look at Odin I don't see the ID:COM become blue or green and see don't see the word added (what in my opinion seems to be meaning that the Tab is not connected with my laptop).
I tryed several things to see if that would work, I mean changing the order of how to connect the Tab to the laptop. But I did not have any success.
I remember when rooting and flashing the Tab before, it was very easy to connect the Tab with Oding to the PC/Laptop, but now I don't have any success.
Could it be that there are problems with using Windows 8 (unfortunately I don't have a Windows 7 PC/laptop available to me the coming week).
So the question is if any of you guys that are more handy in these things got any idea what I am doing wrong and more important got any idea how to fix it.
Hope to hear from someone soon.
Thnx in advance.
pow3rflow3r said:
Could it be that there are problems with using Windows 8 (unfortunately I don't have a Windows 7 PC/laptop available to me the coming week).
So the question is if any of you guys that are more handy in these things got any idea what I am doing wrong and more important got any idea how to fix it.
Hope to hear from someone soon.
Thnx in advance.
Click to expand...
Click to collapse
Upgrade to Windows 7 and you'll be fine.
Does your system see anything when you plug in the tablet? You should at least get some indication that it's recognizing it.
If you bring up the Device Manager (Windows-X key, or Control Panel/Hardware/Device Manager) does the device show up?
(I'm thinking there may be some problem with the cable. I've been burned by that in the past.)
I am just in the progress of indeed installing Windows 7 again.
When I plug in the Tab into this laptop (old one running ubuntu) I dont see anything happening, but the Tab does charge.
So I will wait a few mins again and try it with Windows 7.
Thnx for the reply.
Ok Windows 7 installed and tried again, still no luck.
Still no connection with laptop.
I looked at the device manager and although I don't know where exactly to look I don't see any difference if the Tab is plugged in or not.
As I said, charging seems to be working fine when plugged in the laptop and also when connected to a wall socket.
Hmmm, ok, next step I am gonna buy a new cable and see if this will fix the problem.
Will update when I bought the new cable.
Have you enabled USB Debugging in Developers Options?
Also, did you check MTP in Settings-Storage-menu at top right corner-USB Connection.
Until these are done the laptop will not recognise your tablet at all.
Sent from my GT-P7500 using xda app-developers app
John Kester said:
Have you enabled USB Debugging in Developers Options?
Also, did you check MTP in Settings-Storage-menu at top right corner-USB Connection.
Until these are done the laptop will not recognise your tablet at all.
Sent from my GT-P7500 using xda app-developers app
Click to expand...
Click to collapse
USB Debugging was/is enabled.
Also, did you check MTP in Settings-Storage-menu at top right corner-USB Connection:
Dont know how to do this as I cant find this option, if I go on my Tab to Settings-Storage I dont see this option.
I am not on a stock ROM, but on Task14 Slim ROM.
But when I connect my Tab via usb to my laptop, I get the message in the bottom bar that "USB is connected" and that "MTP is connected". Although I dont see anything happening on my laptop.
pow3rflow3r said:
USB Debugging was/is enabled.
Also, did you check MTP in Settings-Storage-menu at top right corner-USB Connection:
Dont know how to do this as I cant find this option, if I go on my Tab to Settings-Storage I dont see this option.
I am not on a stock ROM, but on Task14 Slim ROM.
But when I connect my Tab via usb to my laptop, I get the message in the bottom bar that "USB is connected" and that "MTP is connected". Although I dont see anything happening on my laptop.
Click to expand...
Click to collapse
If you see "MTP is connected" means the option is already enabled. If autoplay did not work you may not see any action. Open my computer and see if you will find your sdcard mounted as a portable device. Open it.
Sent from my GT-P7500 using xda app-developers app
John Kester said:
If you see "MTP is connected" means the option is already enabled. If autoplay did not work you may not see any action. Open my computer and see if you will find your sdcard mounted as a portable device. Open it.
Sent from my GT-P7500 using xda app-developers app
Click to expand...
Click to collapse
No I do not see any "extra" device in "my computer" when I connect the Tab.
Windows 8 or Windows 7, you should be able to see the device. I recommend going into device manager and deleting the drivers (the option to delete is in the window after selecting uninstall).
Grab these drivers and try http://www.samsung.com/us/support/owners/product/GT-P7510MAYXAB
I use them for my Samsung devices and have no issue ODIN seeing my devices in Win 7 or 8.
nakedninja42 said:
Windows 8 or Windows 7, you should be able to see the device. I recommend going into device manager and deleting the drivers (the option to delete is in the window after selecting uninstall).
Grab these drivers and try http://www.samsung.com/us/support/owners/product/GT-P7510MAYXAB
I use them for my Samsung devices and have no issue ODIN seeing my devices in Win 7 or 8.
Click to expand...
Click to collapse
I did as you said but also with those drivers no succes.
Then I downloaded drivers from the Thai Samsung support site (KiesSetup), because I am in Thailand.
But this was more of a sync program with USB drivers also implemented.
But here also no succes.
Now I am going to the Mall and see if I can buy a new USB cable and hopefully this will solve my problem.
Thnx for the reply's!
Ok, I got a new cable and I can connect the Tab to the laptop again. I am doing some file transfers now and then I am gonna try to flash the bootloader and after that flash the new CM10.1 ROM. Hmmm could as easily just see for a new Nightly the other one is already 2 a 3 days old.
I just used the USB drivers from http://wiki.cyanogenmod.org/w/Install_CM_for_p4wifi
Thnx all for the help.
SOLVED
The problem was the cable, I bought a new cable and I just flashed the bootloader with Odin.
This is how I remember it to be working. Easy, simple and fast!!!!
Again everyone thnx for your idea's/help!!!
You can download just the drivers from here.
http://www.samsung.com/uk/support/model/GT-I9100LKAXEU-downloads
Choose software and then its the 2nd listing. You wont need to install Kies as well then. I have had no problems using these under Windows 8.
Sent from my GT-P7510
Which option in Odin?
Hey,
Could you tell me which option did you use in Odin to flash the bootloader? Was it the PDA slot or Bootloader slot?
Thanks
Allisson
i am bought yesterday samsung galaxy s3 (i9300) when i am connect the phone to the computer his pop up message unknow usb device i was try to replace a cable and computer but nothing work i was install kies and remove drive and reinstall driver but there is no change my rom is ics 4.0.4 and i didnt find any usb settings (mass storage/mtp) in the main settings i am very desperate :crying::crying::crying::crying:
install usb drivers from kies
Sent from my GT-I9300 using xda app-developers app
Z3US911 said:
install usb drivers from kies
Sent from my GT-I9300 using xda app-developers app
Click to expand...
Click to collapse
i have been tried without succses
Just checking, are you sure that you bought an legitimate Samsung Galaxy S3 I9300? Maybe it is a fake? Where did you buy it, was it used before?
Go into settings and then "about phone" and then read what phone model you have.
BTW Kies is the worst crap ever if it comes to Phone management softwares.
Try to uninstall Kies and install only the drivers instead, which you can find here:
http://forum.xda-developers.com/showthread.php?t=2038555
Scarface1991 said:
Just checking, are you sure that you bought an legitimate Samsung Galaxy S3 I9300? Maybe it is a fake? Where did you buy it, was it used before?
Go into settings and then "about phone" and then read what phone model you have.
BTW Kies is the worst crap ever if it comes to Phone management softwares.
Try to uninstall Kies and install only the drivers instead, which you can find here:
http://forum.xda-developers.com/showthread.php?t=2038555
Click to expand...
Click to collapse
Whats your windows version.
If u are on win8 took me 1 hour to make it work properly.
And adb doenst work i olny get mass storage acess
Sent from my GT-I9300 using xda premium
danielad200 said:
i am bought yesterday samsung galaxy s3 (i9300) when i am connect the phone to the computer his pop up message unknow usb device i was try to replace a cable and computer but nothing work i was install kies and remove drive and reinstall driver but there is no change my rom is ics 4.0.4 and i didnt find any usb settings (mass storage/mtp) in the main settings i am very desperate :crying::crying::crying::crying:
Click to expand...
Click to collapse
We need to know what phone you have .
Settings About what is the firmware and baseband .
jje
I have a samsung galaxy young s6312, stock android 4.1.2 jellybean, non rooted. I am unable to connect it with kies, however hard I try. Kies shows the dialog box "reconnect the phone in samsung kies (pc studio) mode. Current connection mode not supported by kies" Usb debugging is disabled. I tried rebooting my phone. I also tried rebooting my pc. I tried reinstalling kies, but nothing worked. I have never been able to connect it with kies. I googled the issue, visited thousands of sites, but no solution worked for me. Plz help.......
mayank06199 said:
I have a samsung galaxy young s6312, stock android 4.1.2 jellybean, non rooted. I am unable to connect it with kies, however hard I try. Kies shows the dialog box "reconnect the phone in samsung kies (pc studio) mode. Current connection mode not supported by kies" Usb debugging is disabled. I tried rebooting my phone. I also tried rebooting my pc. I tried reinstalling kies, but nothing worked. I have never been able to connect it with kies. I googled the issue, visited thousands of sites, but no solution worked for me. Plz help.......
Click to expand...
Click to collapse
download the latest kies
use the original usb cable
try any other usb port
I hav latest kies
I tried connecting it to other port and I am using the cable that came with my mobile
But nothing worked.....
mayank06199 said:
I hav latest kies
I tried connecting it to other port and I am using the cable that came with my mobile
But nothing worked.....
Click to expand...
Click to collapse
when connecting to pc how the mobile responds
In the notification bar it shows connected as media device. Nothing else(well, it's charging, of course)
mayank06199 said:
In the notification bar it shows connected as media device. Nothing else(well, it's charging, of course)
Click to expand...
Click to collapse
select in notification and disconnect
connecting as media only mounts sd card and will not connect to kies
Don't use kies try airdroid
Sent from my GT-I9082 using XDA Premium 4 mobile app
adi160699 said:
Don't use kies try airdroid
Sent from my GT-I9082 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
airdrod is only used to send files
and his question is about kies not file transfer
sangalaxy said:
airdrod is only used to send files
and his question is about kies not file transfer[/QUOTE
But kies is used for the device drivers right??
Sent from my GT-I9082 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
adi160699 said:
sangalaxy said:
airdrod is only used to send files
and his question is about kies not file transfer[/QUOTE
But kies is used for the device drivers right??
Sent from my GT-I9082 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
kies is not only for drivers
for drivers you can download Samsung usb drivers
kies is used for upgrading updating and recovering firmwares
syncing contacts sms etc with pc and backing up etc
Click to expand...
Click to collapse
I guess I won't ever be able to connect my phone to my pc with kies...
Thanks anyway.....
mayank06199 said:
I guess I won't ever be able to connect my phone to my pc with kies...
Thanks anyway.....
Click to expand...
Click to collapse
may be some files corrupted with rooting and non rooting etc
are you on a fresh stock rom if not try flashing