i did a restore of my lumia 710 with zune and now the phone doesn't power on. no button combination works, no vibration, nothing! however when i plug in the usb cable windows recognizes the device as Nokia USB Connectivity. i had the Qualcom bootloader but put back on nokia dload sometime earlier. NSS detects my phone but shows it in OSBL mode and no matter which mode i try to switch the phone to in NSS, nothing happens! heeeeeelp
I'm not an expert, but i'm just trying to help..
You can try checking on Linux if your device have 9 partitions, if yes, you can flash it with with the archive you created when you full-unlocked your phone, if u don't have it, you can ask for it to someone.
checked that already. those partitions are only accessible if qualcomm mode is present and i have dload. so what you suggested wont work. thanks though!
Have you tried with NSS? Check it at this link
look at my first post and the last line. haha i already tried that and it doesnt switch modes no matter what
deylo said:
i did a restore of my lumia 710 with zune and now the phone doesn't power on. no button combination works, no vibration, nothing! however when i plug in the usb cable windows recognizes the device as Nokia USB Connectivity. i had the Qualcom bootloader but put back on nokia dload sometime earlier. NSS detects my phone but shows it in OSBL mode and no matter which mode i try to switch the phone to in NSS, nothing happens! heeeeeelp
Click to expand...
Click to collapse
Have you managed to fix Nokia ?
well i sent the phone into nokia and a new phone is one the way
Hi!
I am trying to flash the official firmware to my Lumia 710 on a windows xp when I connect simply in NAND mode after some time windows reconnects it(and turns it on) so I cant start the flashing. What is the problem? I have all the necessary drivers...
Gectra said:
Hi!
I am trying to flash the official firmware to my Lumia 710 on a windows xp when I connect simply in NAND mode after some time windows reconnects it(and turns it on) so I cant start the flashing. What is the problem? I have all the necessary drivers...
Click to expand...
Click to collapse
run as adminstrator
SOLVED: Hold down volume+ button while plugged in. Download and install "nokia usb driver" (second link) while the DLOAD in device manager still has no driver. Make sure your phone does not power by holding volume+, install it quickly.
NSS should detect your phone now.
You need to uninstall the Nokia USB Driver if you installed the Nokia Suite. And reinstall the one on the second result of google "nokia-connectivity-usb-driver..."
-------------------------- end solved---------------------
I cannot seem to be able to get rid of the DLOAD. Everytime I plug it in by holding the volume button after the shake or volume + power then wait for shake before plugging. My XP-SP3 inside VMWare recognizes the device and DLOAD but there is no driver for it. Then the device powers on and switches to normal mode in about 20 seconds.
Also NSS does not detect the device. In either mode. I installed zune successfully and got the windows phone driver working (a problem I had on my Win7-N without media player when I used my laptop).
Do I need to install the DLOAD driver to be able to detect the phone with NSS? Why does the phone keep powering itself on?
I tried both the long tutorial and the short NSS one. Cannot get either to work simply because the phone is not detected.
Helo everybody,
Today my Lumia 920 suddenly stopped working. I wont turn on. I have tried all the key combinations to do soft resets.. hard resets.. etc.. Not even vibrating with those key combinations.
Also I connected it the computer and it wasn't recognized and the device manager shows "Qualcomm HS-USB QDLoader 9008" instead. No NOKIA Software (Nokia Care Suite, Nokia Suite, Zune,Nokia Software Updater for Retail, Nokia Recovery, etc) could detect the phone neither!
in Nokia Software Recovery Tool you tried "My phone does not start up or respond"?
if this not help, only one is left: go to Nokia service...
Hi . My LG L70 D325 is working fine and it's on but i have DBI Fatal Err problem and i want to flash rom .
but when i connect it to any computer with windows 7 or windows 10 in MTP mode or other modes nothing appears in device manager or windows explorer .it just charge the phone. even when i turn of device and press volume up and connect it to computer i see fatal err but no drive show in explorer to fix it.. i have installed LG Mobile Drivers and LG PC Suite.
i enabled developer option but still not working.
i used to connect it to computer and it worked but recently it's not .
i tried many different usb cables . cables that work for other phones but not on my phone.
A very old yet lovely phone. You need to have LG / Qualcomm drivers installed in your PC for correct identification and gain access to all service options including firmware flashing for this device. And a Windows PC. Windows XP or 7 will do the job.
I have posted all the links many times here on XDA. Feel free to find using my username.