Dead Lumia 710 - Nokia Lumia 800

i did a restore of my lumia 710 with zune and now the phone doesn't power on. no button combination works, no vibration, nothing! however when i plug in the usb cable windows recognizes the device as Nokia USB Connectivity. i had the Qualcom bootloader but put back on nokia dload sometime earlier. NSS detects my phone but shows it in OSBL mode and no matter which mode i try to switch the phone to in NSS, nothing happens! heeeeeelp

I'm not an expert, but i'm just trying to help..
You can try checking on Linux if your device have 9 partitions, if yes, you can flash it with with the archive you created when you full-unlocked your phone, if u don't have it, you can ask for it to someone.

checked that already. those partitions are only accessible if qualcomm mode is present and i have dload. so what you suggested wont work. thanks though!

Have you tried with NSS? Check it at this link

look at my first post and the last line. haha i already tried that and it doesnt switch modes no matter what

deylo said:
i did a restore of my lumia 710 with zune and now the phone doesn't power on. no button combination works, no vibration, nothing! however when i plug in the usb cable windows recognizes the device as Nokia USB Connectivity. i had the Qualcom bootloader but put back on nokia dload sometime earlier. NSS detects my phone but shows it in OSBL mode and no matter which mode i try to switch the phone to in NSS, nothing happens! heeeeeelp
Click to expand...
Click to collapse
Have you managed to fix Nokia ?

well i sent the phone into nokia and a new phone is one the way

Related

Cannot see bootloader on 710 !

hi all,
i just want to see which bootloader i have on my 710, but combination VOL+ POWER then plug in USB doesn't work,
even tryed VOL+ VOL - / VOL+ VOL - POWER, i have the short vibration but as soon as i plug in computer, windows phone load.
i am with Win7 and my phone has been updated recently via Zune.
any advice ?
bootloader
what are you trying to achieve here are you trying to check which bootloader you have or try to flash a custom rom or even sim unlock the device
to get the phone into flash mode its vol + and then power short vibration then plug usb lead in the computer should then detect it. all fails get nokia care suite flash the old firmware that has the unlocked bootloader, you could also plug your phone in as normal then load nss and choose the osbl option then click the arrow that will force the phone into flash mode
rob :good:
thx for the info, i'm trying first to check which boot-loader i have, but i didn't install nokia care suite yet. that's probably why the computer doesn't find the drivers and the phone boot normally in windowsphone. maybe i will install a custom rom to be more comfortable. anyhow it was not simlocked...

SOLVED: Phone not Detected :( RM-809 Lumia 710

SOLVED: Hold down volume+ button while plugged in. Download and install "nokia usb driver" (second link) while the DLOAD in device manager still has no driver. Make sure your phone does not power by holding volume+, install it quickly.
NSS should detect your phone now.
You need to uninstall the Nokia USB Driver if you installed the Nokia Suite. And reinstall the one on the second result of google "nokia-connectivity-usb-driver..."
-------------------------- end solved---------------------
I cannot seem to be able to get rid of the DLOAD. Everytime I plug it in by holding the volume button after the shake or volume + power then wait for shake before plugging. My XP-SP3 inside VMWare recognizes the device and DLOAD but there is no driver for it. Then the device powers on and switches to normal mode in about 20 seconds.
Also NSS does not detect the device. In either mode. I installed zune successfully and got the windows phone driver working (a problem I had on my Win7-N without media player when I used my laptop).
Do I need to install the DLOAD driver to be able to detect the phone with NSS? Why does the phone keep powering itself on?
I tried both the long tutorial and the short NSS one. Cannot get either to work simply because the phone is not detected.

Dead after check bootloader version

Hello,
I have a Lumia 800 branded TIM Italy, black.
Yesterday I tried to find the bootloader type, Nokia DLOAD or Qualcomm.
I used Vol Up + Power, I connected the USB cable, I saw on the W7 Devices and Printers that is a Nokia DLOAD. This information disappeared in few seconds.After Lumia was completely dead.
I tried all buttons combinations and USB cable connected/disconnected. No sign of life, sound, etc...
What I can do to start him?
Thanks!
Thank you, but still nothing.
Another thing: If I connect to PC, is no sign from PC side that something was connected.
Solved!!!
The unique combination: camera button down + several connections of powered USB.
All other combinations failed.
Did You click "format" when window "This device need to be formated" shows? If Yes your phone is bricked - give it to Nokia Care.
No, just plug to PC, nothing else.
wajdzik said:
Did You click "format" when window "This device need to be formated" shows? If Yes your phone is bricked - give it to Nokia Care.
Click to expand...
Click to collapse
he clearly said that he has got nokia dload, dload cannot be formated
kata2008 said:
Solved!!!
The unique combination: camera button down + several connections of powered USB.
All other combinations failed.
Click to expand...
Click to collapse
but did you get your lumia back on. because i am having the same problem and i tried your given combination and pc connects to dload but thats it.
i am having the same problem. yesterday i unlockt it for developer using trough sdk. and this morning i wanted to check my bootloader. en then it didnt do anything.
doneyhtc said:
but did you get your lumia back on. because i am having the same problem and i tried your given combination and pc connects to dload but thats it.
i am having the same problem. yesterday i unlockt it for developer using trough sdk. and this morning i wanted to check my bootloader. en then it didnt do anything.
Click to expand...
Click to collapse
now the pc aint saying dload any more but nothing. he finds it because he gives the sound. and somethimes the phone is reacting different.
kata2008 said:
Hello,
I have a Lumia 800 branded TIM Italy, black.
Yesterday I tried to find the bootloader type, Nokia DLOAD or Qualcomm.
I used Vol Up + Power, I connected the USB cable, I saw on the W7 Devices and Printers that is a Nokia DLOAD. This information disappeared in few seconds.After Lumia was completely dead.
I tried all buttons combinations and USB cable connected/disconnected. No sign of life, sound, etc...
What I can do to start him?
Thanks!
Click to expand...
Click to collapse
HI these guys can fix it with JTAG
http://www.ebay.co.uk/itm/Boot-Repa...K_Replacement_Parts_Tools&hash=item416ea4e9be
kata2008 said:
Hello,
I have a Lumia 800 branded TIM Italy, black.
Yesterday I tried to find the bootloader type, DLOAD or Qualcomm.
I used Vol Up + Power, I connected the USB cable, I saw on the W7 Devices and Printers that is a DLOAD. This information disappeared in few seconds.After Lumia was completely dead.
I tried all buttons combinations and USB cable connected/disconnected. No sign of life, sound, etc...
What I can do to start him?
Thanks!
Click to expand...
Click to collapse
This is because emptying the battery you must remain connected to the PC and try from time to time on appuier volume down + camera button + power button getting started one reinitialization of the factory default
Warning: the method of the buttons will cause the loss of all data

Lumia 800 wont go to recovery

Im trying to get my Lumia 800 into recovery mode. This is what i do:
(I use Nokia Care Suit to update to WP7.8)
1. disconnect USB
2. Power off device
3. hold VOL UP button
4. keep holding VOL UP and insert USB cable
5. keep holding VOL UP till i feel a vibration.
6. Pray it will all go well.
My prayers have not helped. Everytime the phone vibrates again and does a normal startup.. What am i doing wrong?
Frimware revision number: 1750.0805.8773.12220
Hardware revision number: 112.1402.2.3
Qualcomm bootloader
Windows 8 x64 & Linux Ubuntu. Both dont work.
Edit:
Windows device manager shows a "Windows Phone" under undefinded. But that disappears after a few second as my Nokia Lumia 800 reboots. Then it is recognised as a Lumia 800.
Twiggie said:
Im trying to get my Lumia 800 into recovery mode. This is what i do:
(I use Nokia Care Suit to update to WP7.8)
1. disconnect USB
2. Power off device
3. hold VOL UP button
4. keep holding VOL UP and insert USB cable
5. keep holding VOL UP till i feel a vibration.
6. Pray it will all go well.
My prayers have not helped. Everytime the phone vibrates again and does a normal startup.. What am i doing wrong?
Frimware revision number: 1750.0805.8773.12220
Hardware revision number: 112.1402.2.3
Qualcomm bootloader
Windows 8 x64 & Linux Ubuntu. Both dont work.
Click to expand...
Click to collapse
In Nokia Care Suite drivers folder (C:\Program Files (x86)\Nokia\Nokia Care Suite\Drivers) try to install the drivers again, for me it works
Thank you for your help. But unfortunately it does not work.
Everytime i try to get into recovery mode, the phone does connect, i hear a connection sound on my Windows 8 machine. Then the phone restarts into normal mode and zune starts.
I had the same issue...
And in Nokia Fuse, the device is available, but in the combobox of Nokia Care Suite, it doesn't appear...
Anyone can help us?
Twiggie said:
Thank you for your help. But unfortunately it does not work.
Everytime i try to get into recovery mode, the phone does connect, i hear a connection sound on my Windows 8 machine. Then the phone restarts into normal mode and zune starts.
Click to expand...
Click to collapse
It could be that you're using the wrong format of driver. I had to install the x64 driver. check the computer you're on and install the x64 or x32 driver for it.
next, why are you trying to access recovery mode? you dont need to - with these drivers Nokia Care Suite does it itself.
ccmiller said:
It could be that you're using the wrong format of driver. I had to install the x64 driver. check the computer you're on and install the x64 or x32 driver for it.
next, why are you trying to access recovery mode? you dont need to - with these drivers Nokia Care Suite does it itself.
Click to expand...
Click to collapse
Thank you for your answer.
I have Win 8 x64, so i installed the x64 version of the drivers. But no luck.
When i try to use Nokia Care Suit, the programe looks for the latest software (7.8) then it wants to install it on the phone, restarts te phone and then i get a message that the connection has been lost. And i need to turn off the phone, and do that whole VOL UP thing again. But the computer never ever recognices the phone in recoverymode. The Lumia 800 just boots up normally.
Watch out before flashing and losing a lucky qualcomm bootloader
Twiggie said:
Im trying to get my Lumia 800 into recovery mode. This is what i do:
(I use Nokia Care Suit to update to WP7.8)
1. disconnect USB
2. Power off device
3. hold VOL UP button
4. keep holding VOL UP and insert USB cable
5. keep holding VOL UP till i feel a vibration.
6. Pray it will all go well.
My prayers have not helped. Everytime the phone vibrates again and does a normal startup.. What am i doing wrong?
Frimware revision number: 1750.0805.8773.12220
Hardware revision number: 112.1402.2.3
Qualcomm bootloader
Windows 8 x64 & Linux Ubuntu. Both dont work.
Edit:
Windows device manager shows a "Windows Phone" under undefinded. But that disappears after a few second as my Nokia Lumia 800 reboots. Then it is recognised as a Lumia 800.
Click to expand...
Click to collapse
same happening with me...all things same...just i have lumia 710...please help
atlast this worked for me
http://forum.xda-developers.com/showthread.php?t=1702815
you have to first upgrade to nokia dload using this...then all will be fine...

[Q] Phone bricked after flashing

hello!
i've got problem with my lumia 920.
While it was updating to amber my PC freezed and after that, phone seems to be dead. Screen won't turn on, in my computer it is shown as Qualcomm HS-USB QDLoader 9008. I've tried to recover it via nokia care suite, but it failed on step "Hold the Volume Down and the Power button, click RETRY on the Product Support Tools Window". There is no vibration and suite doesn't see it.
It seems to be wiped out bootloader or something similiar.
I've got QPST and try to recover bootloader, but I don't have necessary files.
Can you help me with it?
Did you try refurbished option in NCS ?
http://digipassion.com/2013/01/use-nokia-care-suite-to-flash-update-nokia-mobiles.html
boril said:
Did you try refurbished option in NCS ?
http://digipassion.com/2013/01/use-nokia-care-suite-to-flash-update-nokia-mobiles.html
Click to expand...
Click to collapse
same result.
ncs doesn't see my phone, volume down + power doesn't end with vibration on my phone.

Categories

Resources