hello!
i've got problem with my lumia 920.
While it was updating to amber my PC freezed and after that, phone seems to be dead. Screen won't turn on, in my computer it is shown as Qualcomm HS-USB QDLoader 9008. I've tried to recover it via nokia care suite, but it failed on step "Hold the Volume Down and the Power button, click RETRY on the Product Support Tools Window". There is no vibration and suite doesn't see it.
It seems to be wiped out bootloader or something similiar.
I've got QPST and try to recover bootloader, but I don't have necessary files.
Can you help me with it?
Did you try refurbished option in NCS ?
http://digipassion.com/2013/01/use-nokia-care-suite-to-flash-update-nokia-mobiles.html
boril said:
Did you try refurbished option in NCS ?
http://digipassion.com/2013/01/use-nokia-care-suite-to-flash-update-nokia-mobiles.html
Click to expand...
Click to collapse
same result.
ncs doesn't see my phone, volume down + power doesn't end with vibration on my phone.
Related
i did a restore of my lumia 710 with zune and now the phone doesn't power on. no button combination works, no vibration, nothing! however when i plug in the usb cable windows recognizes the device as Nokia USB Connectivity. i had the Qualcom bootloader but put back on nokia dload sometime earlier. NSS detects my phone but shows it in OSBL mode and no matter which mode i try to switch the phone to in NSS, nothing happens! heeeeeelp
I'm not an expert, but i'm just trying to help..
You can try checking on Linux if your device have 9 partitions, if yes, you can flash it with with the archive you created when you full-unlocked your phone, if u don't have it, you can ask for it to someone.
checked that already. those partitions are only accessible if qualcomm mode is present and i have dload. so what you suggested wont work. thanks though!
Have you tried with NSS? Check it at this link
look at my first post and the last line. haha i already tried that and it doesnt switch modes no matter what
deylo said:
i did a restore of my lumia 710 with zune and now the phone doesn't power on. no button combination works, no vibration, nothing! however when i plug in the usb cable windows recognizes the device as Nokia USB Connectivity. i had the Qualcom bootloader but put back on nokia dload sometime earlier. NSS detects my phone but shows it in OSBL mode and no matter which mode i try to switch the phone to in NSS, nothing happens! heeeeeelp
Click to expand...
Click to collapse
Have you managed to fix Nokia ?
well i sent the phone into nokia and a new phone is one the way
I bought my wife a Lumia AT&T 920 off off ebay as an anniversary present(i know, was stupid). Turns out it was a demo unit.
So, after researching a bit, i decided to flash the RM-820 AT&T 1314 update on it through nokia care suite (NCS). As soon as the it started update (red screen on the phone with the progress bar), the flash failed, and the lumia has since been dead.
Issues:
1- doesn't vibrate on any key combinations etc
2- the computer and NCS do not recognise the phone as lumia 920 HOWEVER, the phone shows up as QUALCOMM INPUT DEVICE in Windows 8 as soon i connect the usb cable to the computer with the power and volume down button.
However, this mode does not let me flash to another firmware. The NCS doesn't recognise the phone at all.
Please help!
download firmware with Product code (with Nokia Care Service) and flash it... use NCS v2013.13.4.4 (dont upgrade to newer versions) and change usergroupsconfiguration.cfg before use NCS
Copy and replace the usergroupsconfiguration.cfg file to:
- if Windows x64 (64 bit) to C:\Program Files (x86)\Nokia\Nokia Care Suite\Product Support Tool For Store 5.0
- if Windows x86 (32 bit) to C:\Program Files\Nokia\Nokia Care Suite\Product Support Tool For Store 5.0
look here
dxdy said:
download firmware with Product code (with Nokia Care Service) and flash it... use NCS v2013.13.4.4 (dont upgrade to newer versions) and change usergroupsconfiguration.cfg before use NCS
Copy and replace the usergroupsconfiguration.cfg file to:
- if Windows x64 (64 bit) to C:\Program Files (x86)\Nokia\Nokia Care Suite\Product Support Tool For Store 5.0
- if Windows x86 (32 bit) to C:\Program Files\Nokia\Nokia Care Suite\Product Support Tool For Store 5.0
look here
Click to expand...
Click to collapse
Thanks - thats exactly what i did. Downloaded firmware for RM-820 AT&T yellow. The problem is NCS doesn't recognise the phone no matter what i do. The phone shows up in windows 8 as Qualcomm input device.
NCS not recognize bricked devices
from WPCentral:
Nokia_Care_Suite_5.0_2012.45.4.5 Directions:
1. Launch Nokia Care Suite
2. Click the Product Support Tool for Store 5.0
3. Click File
4. Click Open Product
5. Choose RM-820 (Nokia Lumia 920)
6. On the bottom left click Programming
7. Click Recovery
8. You should see the firmware you downloaded and copied earlier under the Properties field.
9. Click Start
10. The software will check the package contents, it will fail to find the phone, and ask you to reboot and give you a button to click retry.
Phone Directions:
1. Plug the phone into your PC
2. Hold the Volume Down and the Power button, click RETRY on the Product Support Tools Window
3. After you feel a vibration in the phone immediately release the Volume Down and the Power button and hold the Volume up button.
4. Continue to hold the volume up button, you will see the software say "Rebooting"
5. After about 15 seconds you will see a top NOKIA logo and the software will start flashing the phone.
dxdy said:
NCS not recognize bricked devices
3. After you feel a vibration in the phone immediately release the Volume Down and the Power button and hold the Volume up button.
4. Continue to hold the volume up button, you will see the software say "Rebooting"
5. After about 15 seconds you will see a top NOKIA logo and the software will start flashing the phone.
Click to expand...
Click to collapse
Thank you for your suggestion - Followed this to the T, but i get stuck at step 4, because there is NO VIBRATION. The computer makes a sound when i connect the phone (in the device manager: these two are added: HID Compliant Device and USB input device).
I have installed all drivers, and before my initial flash, the device was being recognised perfectly
i also have a lumia 920 which is in the exactly same condition.Does anyone have any solution for it.
same problem here, cannot turn on no matter what key combination I use. The same issue after a failed flash (power interruption on my pc). the loader on the screen stood for 10 secs than the phone shut off. ever since no solution to power on, nothing
I'm bumping this thread, hoping that someone somewhere has a solution to this, as I'm facing the same problem.. Is there anything to be done apart from sending the phone back to Nokia?
If it is dead due to flashing then your warranty is void and you will have to pay the full repair price. You will find it cheaper just to replace the phone. Even if they gave you the unlock key it is still a warranty void to alter the phones ROM.
algurgazan said:
I'm bumping this thread, hoping that someone somewhere has a solution to this, as I'm facing the same problem.. Is there anything to be done apart from sending the phone back to Nokia?
Click to expand...
Click to collapse
Did you try with refurbished option of NCS ?
http://digipassion.com/2013/01/use-nokia-care-suite-to-flash-update-nokia-mobiles.html
boril said:
Did you try with refurbished option of NCS ?
Click to expand...
Click to collapse
Refurbish option doesn't work, because it doesn't recognise my phone.. To use the refurbish option you need a working phone, and mine doesn't work... Like the other people in this thread it only gets recognised as a Qualcomm HID..
algurgazan said:
Refurbish option doesn't work, because it doesn't recognise my phone.. To use the refurbish option you need a working phone, and mine doesn't work... Like the other people in this thread it only gets recognised as a Qualcomm HID..
Click to expand...
Click to collapse
QPST, link http://www.x-drivers.com/catalog/flash/mobile_phones/companies/qualcomm/models/qpst/12051.html may work to revive the phone if you have the required files, haven`t used it myself so Google around and/or wait for someone who actualy used it.
any luck?
I also have the same problem
I also have the same problem, and also went to nokia care...
but as there was no extra battery available... he was suggesting battery probem.
As spare parts are not available, the issue is still pending..
Have you taken your phone to service centre?
inshadesofgrey said:
I bought my wife a Lumia AT&T 920 off off ebay as an anniversary present(i know, was stupid). Turns out it was a demo unit.
So, after researching a bit, i decided to flash the RM-820 AT&T 1314 update on it through nokia care suite (NCS). As soon as the it started update (red screen on the phone with the progress bar), the flash failed, and the lumia has since been dead.
Issues:
1- doesn't vibrate on any key combinations etc
2- the computer and NCS do not recognise the phone as lumia 920 HOWEVER, the phone shows up as QUALCOMM INPUT DEVICE in Windows 8 as soon i connect the usb cable to the computer with the power and volume down button.
However, this mode does not let me flash to another firmware. The NCS doesn't recognise the phone at all.
Please help!
Click to expand...
Click to collapse
https://drive.google.com/file/d/1IIjRqWjnefuRT6VGonUAs_Hx4KlE0x9T/view?usp=sharing ncs
Go for the risistor method to boot to EDL mode then try to recover it
Helo everybody,
Today my Lumia 920 suddenly stopped working. I wont turn on. I have tried all the key combinations to do soft resets.. hard resets.. etc.. Not even vibrating with those key combinations.
Also I connected it the computer and it wasn't recognized and the device manager shows "Qualcomm HS-USB QDLoader 9008" instead. No NOKIA Software (Nokia Care Suite, Nokia Suite, Zune,Nokia Software Updater for Retail, Nokia Recovery, etc) could detect the phone neither!
in Nokia Software Recovery Tool you tried "My phone does not start up or respond"?
if this not help, only one is left: go to Nokia service...
Hello,
I super hard bricked the Phone from my Brother and he need it for work. I flashed the wrong Stock-Rom.
No when I connect the Phone to the Computer it appears as Qualcomm HS-USB QDLoader 9008.
Is there anywhere an Option to repair it?
Thank you for your attention.
RingeHD said:
Hello,
I super hard bricked the Phone from my Brother and he need it for work. I flashed the wrong Stock-Rom.
No when I connect the Phone to the Computer it appears as Qualcomm HS-USB QDLoader 9008.
Is there anywhere an Option to repair it?
Thank you for your attention.
Click to expand...
Click to collapse
Not sure with LG maybe lgup or 1 of their tools, I saved xiaomi device as long as pc recognises it should be a way, update Qualcomm HS-USB QDLoader from device manager and restart pc disabling driver signature varification. I had to put the phone in download mode.Thats best I can do someone with more knowledge will better explain. When PC doesn't find the phone that's the end without special cable, remove any sharp objects near your brother ��
---------- Post added at 06:41 PM ---------- Previous post was at 06:03 PM ----------
Have you not got a recovery installed anymore?
I Can do nothing. It wont Turn on. The only thing is to plug it into the pc
have it powered off
hold powerup and connect it to the pc
does it start in download mode?
if yes you should be able to upload the stock rom with lgup
Keep us posted how or if you can resurrect the phone.
Can't Go to Download Mode still recognised as Qualcomm 9008
RingeHD said:
Hello,
I super hard bricked the Phone from my Brother and he need it for work. I flashed the wrong Stock-Rom.
No when I connect the Phone to the Computer it appears as Qualcomm HS-USB QDLoader 9008.
Is there anywhere an Option to repair it?
Thank you for your attention.
Click to expand...
Click to collapse
If you can't re-flash a stock ROM with LG UP, perhaps you can take matters in your own hand. But you have to viod the warranty for this. Also, you have to be able to enter fastboot mode.
Since you are from GB, I assume that you have the European H850, which can be bootloader-unlocked.
If so, you can try the following:
- Unlock bootloader
- Flash TWRP
- Flash the complete 10E ZIP file
I don't know if this works, but if your phone is messed up anyways, you can as well try this before throwing it away.
I can't do anything no charging, no turning on. Nothing. The only thing is that it is recognised as Qualcomm
Fix guide for xiaomi
If it's possible for xiaomi can't see why there isn't a way for lg.
http://en.miui.com/thread-226426-1-1.html
Did you try this
http://www.androidbrick.com/ultimat...agons-are-unbrickable-qhsusb_dload_qpst_qfil/
Sounds like you can use miflash/xiaomi tool for any qualcomm snapdragon device.
jazz452 said:
If it's possible for xiaomi can't see why there isn't a way for lg.
http://en.miui.com/thread-226426-1-1.html
Did you try this
http://www.androidbrick.com/ultimat...agons-are-unbrickable-qhsusb_dload_qpst_qfil/
Sounds like you can use miflash/xiaomi tool for any qualcomm snapdragon device.
Click to expand...
Click to collapse
Bumping
Yes, but the tool are not for the phone and won't recognise it
you didnt specify what happens when you plug in usb. the only thing you said was that you can do it instead of turning on or anything else.
When i plug in the phone the phone is still dead only the processor will be recognised. I need a tool to flash the software through QHUSB. I found boarddiag but no systemimage.tot File for the phone
Follow these steps:
1. Remove the battery
2. Put back the battery
3. Hold the volume Up and connect the USB
What happens after that? Do you have the "firmware update" screen on your phone or is still death?
Still death
RingeHD said:
Yes, but the tool are not for the phone and won't recognise it
Click to expand...
Click to collapse
The second link says for any Qualcomm processor.
Did you disable driver signature? Damn only for g3
It's looking like service centre I'm afraid.
http://forum.xda-developers.com/tmobile-lg-g5/help/qualcomm-t-mobile-hs-usb-hs-qdloader-t3391520
if you still have phone inhand conntact me for check phone...
RingeHD said:
Yes, but the tool are not for the phone and won't recognise it
Click to expand...
Click to collapse
Hey check Windows Certificate Manager (certmgr.msc). Remove ANY Certifications with "USB [something] TEST003" from "Trusted Publishers and Trusted basic certificate something (sorry I have to translate it but it is the 2nd from Current User Directory.
If you have ANY Quallcom drivers (uninstall it).
Find Qualcomm HS-USB QDLoader 9008 device under Ports (COM & LPT) and note the COMxy port (in my case it is COM3).
the same happened to me, you could solve it if you were telling me how please ...
the same happened to me, you could solve it if you were telling me how please ...
I think is possible to recover the LG G5 with this tool, but require a full compatible rom in that format, impossible to find.
Here another LG G5 bricked without the "Download" mode screen, only recognizer in USB with "Qualcomm HS-USB QDLoader 9008".
i wanted flash my phone so i follow this guild on youtube.
/watch?v=naQX9Was6DY
after flashing it got red light. it was fine before. i try the vol down +power and volume up and down + power but nothing works.
the computer recognize it as "Qualcomm HS-USB Diagnostics 900E"
i manage to get it to display " Qualcomm HS-USB QDLoader 9008" but dont know how to proceed from here.
Specs Before Dead:
Miui 7.012
Android 5.6
32 Gb Rom,3 Gb Ram (kenzo)
update:
i end up fixing my phone. it was in EDL Mode. i had Flash Using DFC Cable or Xiaomi EDL Cable. i made one from an youtube video ( it was one with button i made, it allow to get get QDLoader 9008 with consistency and without removing the back cover.)
afterthat i just flash it miflash tool with "kenzo_global_images_8.11.22_20181122.0000.00_6.0_global " it had to be DEVELOPER VERSION thought. i dont know if i can do it a second time because it might be a flute that it was able to flash at all LOL. and this is the only phone i have and i dont want to use an Iphone7. one thing i dont like is it wont let me flash twrp or OrangeFox- ( it said it can not found file flash_all.bat) cause when went push vol up + power it just give me standard xiami menu.
when i have a compatible phone on the same cell network, i'll try to flashing a diff rom cause the xiami rom has lots of ads. .
Bluesaky said:
i wanted flash my phone so i follow this guild on youtube.
/watch?v=naQX9Was6DY
after flashing it got red light. it was fine before. i try the vol down +power and volume up and down + power but nothing works.
the computer recognize it as "Qualcomm HS-USB Diagnostics 900E"
i manage to get it to display " Qualcomm HS-USB QDLoader 9008" but dont know how to proceed from here.
Specs Before Dead:
Miui 7.012
Android 5.6
32 Gb Rom,3 Gb Ram (kenzo)
please help
Click to expand...
Click to collapse
I think you have locked your bootloader. Well if that is the case try flashing TWRP again it will solve your problem.
Refer to this tutorial https://www.youtube.com/watch?v=xExKvog5RP4
LoadOP2 said:
I think you have locked your bootloader. Well if that is the case try flashing TWRP again it will solve your problem.
Refer to this tutorial watch?v=xExKvog5RP4[/url]
Click to expand...
Click to collapse
from you tube
tried it, didnt work. it said flash success. but the phone will not power on. VOL up +power not working, vol down + power not working either
Bluesaky said:
i wanted flash my phone so i follow this guild on youtube.
/watch?v=naQX9Was6DY
after flashing it got red light. it was fine before. i try the vol down +power and volume up and down + power but nothing works.
the computer recognize it as "Qualcomm HS-USB Diagnostics 900E"
i manage to get it to display " Qualcomm HS-USB QDLoader 9008" but dont know how to proceed from here.
Specs Before Dead:
Miui 7.012
Android 5.6
32 Gb Rom,3 Gb Ram (kenzo)
please help
Click to expand...
Click to collapse
Are you able to boot your device into EDL mode? If not, try to boot into EDL using the test point method if default method doesn't work. If you're successful in booting up in EDL, Follow the below forum to recover the bootloader and recovery.
Link to the test point method tutorial: https://www.youtube.com/watch?v=_jv1ZVQ95Ng
Follow this after you enter the EDL mode successfully: https://forum.xda-developers.com/redmi-note-3/how-to/unlock-unofficially-install-zcx-twrp-t3586778