Hey guys,
This is my second atrix. My first suffered the repeated reboot cycle of death. Never could ge tit to work after that. I've had this one about 2 weeks then all of a sudden today while using tapatalk it just rebooted itself and is stuck at the startup logo screen. Its the stock rom, its unlocked (got it that way) and have not done anything crazy to it. I can not access fastboot or recovery. Fastboot tells me the battery is too low. Which its not, it was close to 100% charge when it rebooted itself. Recovery just says 'entering android recovery mode' and it never loads. Any ideas??
Thanks guys.
Things to try
Try to flash recovery with fastboot. Put phone in RSD mode and use RSD Lite to flash SBF.
fdaconta said:
Try to flash recovery with fastboot. Put phone in RSD mode and use RSD Lite to flash SBF.
Click to expand...
Click to collapse
That's a negative. I get "Battery too low" even when plugged in or using a spare FULL battery.
:cyclops:
fdaconta said:
Try to flash recovery with fastboot. Put phone in RSD mode and use RSD Lite to flash SBF.
Click to expand...
Click to collapse
slowjett said:
That's a negative. I get "Battery too low" even when plugged in or using a spare FULL battery.
Click to expand...
Click to collapse
Correction. I can access the phone in RSD mode. Can't find a download link for 1.2.6 though
After an update failure I got the AP Fast Boot Failure screen, this part I figured out in how to attempt to fix the issue using the RSD Lite 11/11 completed, Finished reboot however it takes me back to the AP Fast Boot Failure screen and same with any other type of boot up. now am I suppose to do something else in order complete the installation or what ?
Motorola Razr XT910 Retail British (no carrier)
any help is appericated
Thanks in advance
Can you power down the device and enter Boot Mode Selection screen (Volume UP+DOWN+Power)?
If can you should try enter the recovery, get a wipe and try reboot.
recovery boot mode
Recovery Boot Mode gave
Invalid Flash Mode Boot Failure
0A.6C
Device is Locked, Status Code: 0
Battery Ok
Ok to Program
Transfer Mode:
USB Connected
Invalid CC OTV CG: Webtop Invalid SP DATA
Invalid CG HAB CG: Webtop, status 0X0056
Invalid CG OTV CG: Webtop
Same problem here. Trying for two days without success. First problem was low battery, but I fix that(open and charge). Now this webtop thing killing me, any help? Please
---------- Post added at 01:01 AM ---------- Previous post was at 12:38 AM ----------
There is some progress. Downloaded Brasilan Retail ICS and tried to flash without success... But this ICS upgraded 0A.6C to 0A.74, after that I flashed UK Retail ICS... And WORKED, AFTER TWO DAYS! :victory:
Try this to get rid of the ap fastboot flas failure screen:
http://forum.xda-developers.com/showthread.php?t=1634223
razror said:
Recovery Boot Mode gave
Invalid Flash Mode Boot Failure
0A.6C
Device is Locked, Status Code: 0
Battery Ok
Ok to Program
Transfer Mode:
USB Connected
me too help me
Click to expand...
Click to collapse
Another one with this problem :S
I was trying some JB ROMs with Us kernel. After restoring my CID and flashing an ICS kernel, I tried to restore and nandroid and when it finished, I rebooted and the phone went to that boot failure screen.
I'm able to flash ICS via RSD, but on first reboot it goes back to that evil screen
And I don't understadn what does that "invalid cg: webtop" mean, as webtop is not used on ICS
---------- Post added at 04:36 PM ---------- Previous post was at 04:29 PM ----------
Well, I'll try this guide from therazrguy posted here http://forum.xda-developers.com/showthread.php?t=2078021
If you guys want to go back to ICS, then
1. Flash the fastboot files using rsd lite
2. Reboot using bp tools
3. Root your device
Remember while rooting when the tool reboots your device press the vol- and vol at the same time when the phone switches off to enter in boot menu mode and reboot using bp tools mode, other wise u will see a black screen everytime u reboot.
4. Once done restore your cid using terminal emulator.
code: dd if=/sdcard/cid.img of=/dev/block/mmcblk1p18
Click to expand...
Click to collapse
blackhawk_LA said:
Another one with this problem :S
I was trying some JB ROMs with Us kernel. After restoring my CID and flashing an ICS kernel, I tried to restore and nandroid and when it finished, I rebooted and the phone went to that boot failure screen.
I'm able to flash ICS via RSD, but on first reboot it goes back to that evil screen
And I don't understadn what does that "invalid cg: webtop" mean, as webtop is not used on ICS
Click to expand...
Click to collapse
This means exactly you lost your webtop partition. hsd pilot already posted the solution somewhere... so search in the forum or ask him
Sent from my XT910 using Tapatalk 2
You may be right, but I think that the main problem is that my phone thinks he is a CDMA one, as it shows so when connected to RSD lite.
So I'm not sure if it will be related to webtop partition or is a "secondary" effect.
I'll search and try that solution anyway, thanks!
blackhawk_LA said:
You may be right, but I think that the main problem is that my phone thinks he is a CDMA one, as it shows so when connected to RSD lite.
So I'm not sure if it will be related to webtop partition or is a "secondary" effect.
I'll search and try that solution anyway, thanks!
Click to expand...
Click to collapse
so, how it`s going, did you fix it? i`m thinking about to return to ics kernel too,and i`m afraid for that problem
No, at the moment I really don't know what to do...
At least, things didn't get worse and I have a factory cable.
But don't know what to do now... Tried flashing with RSD Lite, from fastboot, tried to get into recovery with that "empty_radio" and no way.
I'm only waiting for someone to reupload the webtop files by hsd-pilot. If this doesn't work, I will start thinking that this is a true brick...
blackhawk_LA said:
No, at the moment I really don't know what to do...
At least, things didn't get worse and I have a factory cable.
But don't know what to do now... Tried flashing with RSD Lite, from fastboot, tried to get into recovery with that "empty_radio" and no way.
I'm only waiting for someone to reupload the webtop files by hsd-pilot. If this doesn't work, I will start thinking that this is a true brick...
Click to expand...
Click to collapse
as I see your device boot only into bootloader? you cannot boot in to recovery and your device wont start usin BP tools?
You're right. I only can boot into that "fastboot flash mode (flash failure)", that is the one the loads automatically on every boot, or I can power on using vol+ and vol- and select "ap fastboot mode" and the i boots in the usual fastboot screen.
blackhawk_LA said:
You're right. I only can boot into that "fastboot flash mode (flash failure)", that is the one the loads automatically on every boot, or I can power on using vol+ and vol- and select "ap fastboot mode" and the i boots in the usual fastboot screen.
Click to expand...
Click to collapse
did you tried to flash eternity project ICS fastboot package?
http://forum.xda-developers.com/showthread.php?t=1747800&highlight=eternity
it always help me in the similar situations..
Yes, I already tried. the process is OK, but then the phone reboots and it gos again to the fastboot flash failure screen
Well, can you connect the phone and see it with RSD Lite ?
If so, i have a suggestion..
Try flashing to the fastboot gingerbread rom.
I had a similar problem here, and that was my solution
After flashing to GB with RSD , phone started to work again with no problems...
I think this will solve your problem.
Cheers
Were you able to fastboot flash GB coming from ICS? I thought it was not possible...
try flash RSD from another PC,also try to charge phone with wall charger .. not the best solution, but I`ll try it..
blackhawk_LA said:
Were you able to fastboot flash GB coming from ICS? I thought it was not possible...
Click to expand...
Click to collapse
Hmm
No. When i flashed back to GB, i was running JB.
Also, my phone is special, something like that.
Becoz i have more options on the recovery menu than normal phones.
Like BP Vendor Flash
And my AP FastBoot Menu, instead of S there's an SE.
I've also posted something around here asking what it was
febanovsky said:
Same problem here. Trying for two days without success. First problem was low battery, but I fix that(open and charge). Now this webtop thing killing me, any help? Please
---------- Post added at 01:01 AM ---------- Previous post was at 12:38 AM ----------
There is some progress. Downloaded Brasilan Retail ICS and tried to flash without success... But this ICS upgraded 0A.6C to 0A.74, after that I flashed UK Retail ICS... And WORKED, AFTER TWO DAYS! :victory:
Click to expand...
Click to collapse
@febanovsky could you please tell me what file did you use? Thanks!
---------- Post added at 08:11 PM ---------- Previous post was at 07:48 PM ----------
FIXED!
Thanks to HSD-pilot!
Just follow the part in this tutorial to flash webtop:
http://forum.xda-developers.com/showthread.php?t=1792955
Sorry i did not have the kernel or most information about the phone but ill explain the problem if anyone can help out it'd be a blessing
i have a U.S cellular Motorola electrify running 2.3.5 ( which recently found out was unrom-able)
i got it rooted using one touch method--
Then not thinking -- ( ive rooted and installed roms on other phones never a Motorola) didn't know it needed a unlocked bootloader to function and get roms installed.
i knew i needed a clockworkmod on the phone and i read about the app that boots into clockworkmod bootstrap--apk
did that and it worked--
here is the problem..
didn't install the bootloader.. and tried installing Cyanogenmod10 unofficial rom from photon development forum
rebooted-- got Failed to Start2- starting rsd mode -- if i dont press anything
if i press down it says NV recovery but does nothing
if i press UP it goes into Starting usd recovery ( sorry not exact words not with my phone at the moment)
ive been reading guides.. downing the lock unlock from the bricked guide.. RSD lite would read the phone in the usd recovery
try flashing the offical us cellular back but get an error
wont show up in command prompt
not sure what to do.. please help its hard to function without a phone i hope its not fully bricked
Can you get into fast boot by pressing power and volume-down? If so, you just need to wipe everything using "fastboot -w" and rebooting into RSD mode to flash the uscc sbf.
When you flashed cm10, the kernel is not compatible with the bootloader you're on.
If anyone has the 2.3.5 electrify boot.img, you could probably flash it through fastboot if it'll let you
Sent from my sunfire using xda premium
hoslayer13 said:
Can you get into fast boot by pressing power and volume-down? If so, you just need to wipe everything using "fastboot -w" and rebooting into RSD mode to flash the uscc sbf.
When you flashed cm10, the kernel is not compatible with the bootloader you're on.
If anyone has the 2.3.5 electrify boot.img, you could probably flash it through fastboot if it'll let you
Sent from my sunfire using xda premium
Click to expand...
Click to collapse
Thank you for the reply.. when I press volume down and boot on it says " nv flash mode" then turns off unless hooked in a computer then just stays on that screen
If I press volume up and turn on it says fast boot protocol support and Is half recognized in rsd ITE
If I just power no volume press on it says failed to boot 2 starting RSS mode..
I'm sort of new to everything and need more details.. tryed wiping using fast boot u downloaded but gives error.. same with flashing yes cellular sbf in RSd lite trying all 3 button combos that work
Please I need this phone working.. I messed up someone's phone saying I could put cm10 it for Christmas! Any help would be awesome
Today I looked at my phone and it said there is an update available so i clicked install. After it installed, my phone doesn't want to boot up. All I see is the red Motorola sign and then the phone shuts off. As of now, I can feel the phone is warm but it isn't on. Someone please help me out. I tried pressing the power/volume- & power/volume-&+. Nothing is working...
someone please help me. I've been searching google all day and can't find a solution. My phone only shows the red motorola dual core screen. I don't even have a bootloader. Someone please I would really appreciate it.
Boot into ap fastboot mode and flash using rsdlite
Sent from my XT910 using xda premium
Steven87 said:
Boot into ap fastboot mode and flash using rsdlite
Sent from my XT910 using xda premium
Click to expand...
Click to collapse
thanks for the reply. So far i tried going into apfastboot but I don't know what fastboot files to use. Before all this **** happened, I tried using the firmware update that showed up in my notifications. I don't know if it was a JB update or an update for ICS(which i was on).
UPDATE:
as of now I got my phone working. I used RSDlite and cdma_spyder_9.8.2O-72_VZW-16_1ff.xml
Hello everyone, this is my second post in the community and as above, I draw you before the serious problem that has my cell phone and that despite the help of all of you still not solved enclose descriptions videos and fails the steps and followed over time. :crying::crying:
All this happened when installing from retail jb rom ics one Chinese, after the installation the cell began to discharge too fast to the point of completely unloaded and not turn over, the next thing was wired switch it could enter the factory and then recovery only restarted.
after the above procedure to unbrick with Unbrick method & switch to 982.124.14.XT910.Retail.en.EU with which obtube not any response, after that a user community graciously offered to assist and I sending the same procedure but with the files for my region (Latam) after that the phone showed the motorola logo and restarted but at times passed motorola logo and showed the animated logo motorola, encendia the lights cell buttons and screen bottom came out "Wait a minute" restarted (enclose one. rar with videos of procedures performed and detailed information.
I count on your help and already thank you very much for reading my topic and I hope to get my phone I need too :crying:
:victorydt: my apologies for the bad drafting but all this is performed with English translator (I'm from chile) :laugh::laugh:
Hi,
Based on your video, I haven't see you flashed with RSD Lite and fastboot file.
You can give a try based on this thread:
http://forum.xda-developers.com/showthread.php?t=2231289
Download LATAM fastboot file (Chile should be latam right?) and download also latest rsd lite ver 6.1.4
Good luck and hope it will unbrick your phone.
idwijayaku said:
Hi,
Based on your video, I haven't see you flashed with RSD Lite and fastboot file.
You can give a try based on this thread:
http://forum.xda-developers.com/showthread.php?t=2231289
Download LATAM fastboot file (Chile should be latam right?) and download also latest rsd lite ver 6.1.4
Good luck and hope it will unbrick your phone.
Click to expand...
Click to collapse
reaches the motorola dual core logo and restarts :crying::crying:there some method other than by fasboot?, or some solution?
Have you download fastboot files that match with you region? if yes then you have same issue with me
So far what I know to flash is use batch file that developed by awesome developers here and RSD lite.
Have you try this:
- Go to boot menu (the way you get AP Fastboot menu) but this time try to select BP Tools
- and wait will your phone able to boot into system or not... If you able to boot into bp tools, get your phone root (JB is able for root now, get the thread in development), then install BMM to have it normal boot .. I got this suggestion but never able to have my phone boot in BP Tools, so I never know this works or not so good luck
- When you choose BP Tools and your phone still on M logo turn it off (you should wait only 10 or 15 minutes max) then turn off your phone and put it in boot menu to select BP HW Diag.. then.. we have same issue.. be prepare your phone only able to phone call , sms , taking camera, cannot access data only rely wifi , USB debugging not working, some fastboot files makes your phone not able to charge (I have to turn off my phone then charge)
I still strugling to have my phone back to normal also..
idwijayaku said:
Have you download fastboot files that match with you region? if yes then you have same issue with me
So far what I know to flash is use batch file that developed by awesome developers here and RSD lite.
Have you try this:
- Go to boot menu (the way you get AP Fastboot menu) but this time try to select BP Tools
- and wait will your phone able to boot into system or not... If you able to boot into bp tools, get your phone root (JB is able for root now, get the thread in development), then install BMM to have it normal boot .. I got this suggestion but never able to have my phone boot in BP Tools, so I never know this works or not so good luck
- When you choose BP Tools and your phone still on M logo turn it off (you should wait only 10 or 15 minutes max) then turn off your phone and put it in boot menu to select BP HW Diag.. then.. we have same issue.. be prepare your phone only able to phone call , sms , taking camera, cannot access data only rely wifi , USB debugging not working, some fastboot files makes your phone not able to charge (I have to turn off my phone then charge)
I still strugling to have my phone back to normal also..
Click to expand...
Click to collapse
did not work :crying::crying: still coming to dual core logo and restarts, other help......
Esto.Vir said:
did not work :crying::crying: still coming to dual core logo and restarts, other help......
Click to expand...
Click to collapse
Reflash the appropriate fastboot once again and then reboot into stock recovery and do fill wipe data and chaches . It may fix ya problem
Thx
Hit the thx button if i helped ya in anyways
anurag.dj2u said:
Reflash the appropriate fastboot once again and then reboot into stock recovery and do fill wipe data and chaches . It may fix ya problem
Thx
Hit the thx button if i helped ya in anyways
Click to expand...
Click to collapse
and tested with the brazil retail rom, fido, rogers ye had the same problem, my question is, if all the rom's the same that another problem will have my phone? , I can enter the ap fastboot recovery and all that d the stock recovery, my phone stayed brick to install a Chinese jb rom this tutorial :
http://www.chileandroid.com/t16992-romxt910jelly-bean-jelly-bean-41-2-china-retail-oficial
, Change kernel and everything that goes in the guide, that will be a problem? I hope you can help me from now thank you very much:crying::crying: