[Q] XT910 AP Flash Boot Failure - Motorola Droid RAZR

After an update failure I got the AP Fast Boot Failure screen, this part I figured out in how to attempt to fix the issue using the RSD Lite 11/11 completed, Finished reboot however it takes me back to the AP Fast Boot Failure screen and same with any other type of boot up. now am I suppose to do something else in order complete the installation or what ?
Motorola Razr XT910 Retail British (no carrier)
any help is appericated
Thanks in advance

Can you power down the device and enter Boot Mode Selection screen (Volume UP+DOWN+Power)?
If can you should try enter the recovery, get a wipe and try reboot.

recovery boot mode
Recovery Boot Mode gave
Invalid Flash Mode Boot Failure
0A.6C
Device is Locked, Status Code: 0
Battery Ok
Ok to Program
Transfer Mode:
USB Connected
Invalid CC OTV CG: Webtop Invalid SP DATA
Invalid CG HAB CG: Webtop, status 0X0056
Invalid CG OTV CG: Webtop

Same problem here. Trying for two days without success. First problem was low battery, but I fix that(open and charge). Now this webtop thing killing me, any help? Please
---------- Post added at 01:01 AM ---------- Previous post was at 12:38 AM ----------
There is some progress. Downloaded Brasilan Retail ICS and tried to flash without success... But this ICS upgraded 0A.6C to 0A.74, after that I flashed UK Retail ICS... And WORKED, AFTER TWO DAYS! :victory:

Try this to get rid of the ap fastboot flas failure screen:
http://forum.xda-developers.com/showthread.php?t=1634223

razror said:
Recovery Boot Mode gave
Invalid Flash Mode Boot Failure
0A.6C
Device is Locked, Status Code: 0
Battery Ok
Ok to Program
Transfer Mode:
USB Connected
me too help me
Click to expand...
Click to collapse

Another one with this problem :S
I was trying some JB ROMs with Us kernel. After restoring my CID and flashing an ICS kernel, I tried to restore and nandroid and when it finished, I rebooted and the phone went to that boot failure screen.
I'm able to flash ICS via RSD, but on first reboot it goes back to that evil screen
And I don't understadn what does that "invalid cg: webtop" mean, as webtop is not used on ICS
---------- Post added at 04:36 PM ---------- Previous post was at 04:29 PM ----------
Well, I'll try this guide from therazrguy posted here http://forum.xda-developers.com/showthread.php?t=2078021
If you guys want to go back to ICS, then
1. Flash the fastboot files using rsd lite
2. Reboot using bp tools
3. Root your device
Remember while rooting when the tool reboots your device press the vol- and vol at the same time when the phone switches off to enter in boot menu mode and reboot using bp tools mode, other wise u will see a black screen everytime u reboot.
4. Once done restore your cid using terminal emulator.
code: dd if=/sdcard/cid.img of=/dev/block/mmcblk1p18
Click to expand...
Click to collapse

blackhawk_LA said:
Another one with this problem :S
I was trying some JB ROMs with Us kernel. After restoring my CID and flashing an ICS kernel, I tried to restore and nandroid and when it finished, I rebooted and the phone went to that boot failure screen.
I'm able to flash ICS via RSD, but on first reboot it goes back to that evil screen
And I don't understadn what does that "invalid cg: webtop" mean, as webtop is not used on ICS
Click to expand...
Click to collapse
This means exactly you lost your webtop partition. hsd pilot already posted the solution somewhere... so search in the forum or ask him
Sent from my XT910 using Tapatalk 2

You may be right, but I think that the main problem is that my phone thinks he is a CDMA one, as it shows so when connected to RSD lite.
So I'm not sure if it will be related to webtop partition or is a "secondary" effect.
I'll search and try that solution anyway, thanks!

blackhawk_LA said:
You may be right, but I think that the main problem is that my phone thinks he is a CDMA one, as it shows so when connected to RSD lite.
So I'm not sure if it will be related to webtop partition or is a "secondary" effect.
I'll search and try that solution anyway, thanks!
Click to expand...
Click to collapse
so, how it`s going, did you fix it? i`m thinking about to return to ics kernel too,and i`m afraid for that problem

No, at the moment I really don't know what to do...
At least, things didn't get worse and I have a factory cable.
But don't know what to do now... Tried flashing with RSD Lite, from fastboot, tried to get into recovery with that "empty_radio" and no way.
I'm only waiting for someone to reupload the webtop files by hsd-pilot. If this doesn't work, I will start thinking that this is a true brick...

blackhawk_LA said:
No, at the moment I really don't know what to do...
At least, things didn't get worse and I have a factory cable.
But don't know what to do now... Tried flashing with RSD Lite, from fastboot, tried to get into recovery with that "empty_radio" and no way.
I'm only waiting for someone to reupload the webtop files by hsd-pilot. If this doesn't work, I will start thinking that this is a true brick...
Click to expand...
Click to collapse
as I see your device boot only into bootloader? you cannot boot in to recovery and your device wont start usin BP tools?

You're right. I only can boot into that "fastboot flash mode (flash failure)", that is the one the loads automatically on every boot, or I can power on using vol+ and vol- and select "ap fastboot mode" and the i boots in the usual fastboot screen.

blackhawk_LA said:
You're right. I only can boot into that "fastboot flash mode (flash failure)", that is the one the loads automatically on every boot, or I can power on using vol+ and vol- and select "ap fastboot mode" and the i boots in the usual fastboot screen.
Click to expand...
Click to collapse
did you tried to flash eternity project ICS fastboot package?
http://forum.xda-developers.com/showthread.php?t=1747800&highlight=eternity
it always help me in the similar situations..

Yes, I already tried. the process is OK, but then the phone reboots and it gos again to the fastboot flash failure screen

Well, can you connect the phone and see it with RSD Lite ?
If so, i have a suggestion..
Try flashing to the fastboot gingerbread rom.
I had a similar problem here, and that was my solution
After flashing to GB with RSD , phone started to work again with no problems...
I think this will solve your problem.
Cheers

Were you able to fastboot flash GB coming from ICS? I thought it was not possible...

try flash RSD from another PC,also try to charge phone with wall charger .. not the best solution, but I`ll try it..

blackhawk_LA said:
Were you able to fastboot flash GB coming from ICS? I thought it was not possible...
Click to expand...
Click to collapse
Hmm
No. When i flashed back to GB, i was running JB.
Also, my phone is special, something like that.
Becoz i have more options on the recovery menu than normal phones.
Like BP Vendor Flash
And my AP FastBoot Menu, instead of S there's an SE.
I've also posted something around here asking what it was

febanovsky said:
Same problem here. Trying for two days without success. First problem was low battery, but I fix that(open and charge). Now this webtop thing killing me, any help? Please
---------- Post added at 01:01 AM ---------- Previous post was at 12:38 AM ----------
There is some progress. Downloaded Brasilan Retail ICS and tried to flash without success... But this ICS upgraded 0A.6C to 0A.74, after that I flashed UK Retail ICS... And WORKED, AFTER TWO DAYS! :victory:
Click to expand...
Click to collapse
@febanovsky could you please tell me what file did you use? Thanks!
---------- Post added at 08:11 PM ---------- Previous post was at 07:48 PM ----------
FIXED!
Thanks to HSD-pilot!
Just follow the part in this tutorial to flash webtop:
http://forum.xda-developers.com/showthread.php?t=1792955

Related

Stuck in AP Fastboot Flash Mode PLZ HELP!

Hey Guys
I was flashing my phone using RSD Lite, when suddendly the flash program got stuck. So i powerd off my phone, but now everytime I start it the AP Fastboot Flash Mode (S) (Flash Failure) screen comes up.
What to do?!
Nevermind, the flash worked now
How did you get it to work? Same thing just happened to me and can't figure out how to reflash, RSDLite fails and so does Kholk's alternative
I am having the same problem. stuck at the AP fastboot flash mode
says invalid cdt
at the bottom it says
invalid cg version (cg:cdt)
PLZ any help before my battery dies
I also used rsd lite
Oh I was using the search and seen he was having the same problem but did not notice he has the razor I have the Bionic
Hey Man...power down the phone. Go to the dev thread of razr and look for my one click restore and download it.. my tool should solve ur problem
Sent from my DROID RAZR using XDA App
Do you have a link as i can't find it...
I am having the same problems...
Thank you
cool-freebies
coolfreebies said:
Do you have a link as i can't find it...
I am having the same problems...
Thank you
cool-freebies
Click to expand...
Click to collapse
Just search for his name in that forum.
http://forum.xda-developers.com/showthread.php?t=1451205&highlight=globed
Refreshing
Got the same problem.
Stuck in AP Fastboot mode while charging my mobile. I'm currently runing stock ICS for UK.
I can flash razr via RSD Lite, but nothing happend even if rsd says passed.
Can run Boot mode selection menu, but can't chose any option
If reset the phone with power+volume down it gets again in AP Fastboot
Does anyone can help me. Please!
Can you provide more details ?
jazzone said:
Refreshing
Got the same problem.
Stuck in AP Fastboot mode while charging my mobile. I'm currently runing stock ICS for UK.
I can flash razr via RSD Lite, but nothing happend even if rsd says passed.
Can run Boot mode selection menu, but can't chose any option
If reset the phone with power+volume down it gets again in AP Fastboot
Does anyone can help me. Please!
Click to expand...
Click to collapse
hi mate,
provide more details + some screenshots, and definitely someone ( if not me ) can get you out of this.
Also try to move this thread to Q&A section
I can't make any screen shot couse i stuck in AP Fastboot mode. I can't flash my phone via RSD Lite. Battery is OK, USB connected.
What kind of inormation do You need?
Thanks for help.
I know the thread is in wrong section but I didn't start it.
I'm asking Mods to move it please to CandA place.

FAILED TO BOOT 0x1000 Help me please!!!

I bricked my phone by Flashing pudding with RSD LITE before I unlock my bootloader. Someone told me I should flash pudding to unlock bootloader. Flashing procedure has failed and I got this at the end : http://tinypic.com/r/2lfk1/6
I was on gingerbread 4.5.91, rooted ATT device. I bought it from USA and I'm in Turkey now. I cant send it to warranty.
Is that a soft or hard brick? Can I fix it?! Please say yes.
Please, Help me! I am waiting your answers.
(I'm so noob about the phone, please tell me with more informations)
Does this look like a hard brick to you?
(If you can't tell, the answer is no.)
---------- Post added at 09:07 PM ---------- Previous post was at 09:06 PM ----------
Wait, what SBF did you use? This **** is important.
i think you can still unlock your bootloader through fastboot,
and then flash system image..
Boot into fastboot mode and use the fastboot OEM unlock code from your computer, please read all the instructions in the pudding thread before panicking
Sent from my MB860 using xda premium
Lol! Don't panic, I just got out of the same situation a few hours earlier. Get your atrix into fast boot mode by pressing power and vol up buttons while placing the battery. Then proceed to unlocking your bootloader. Flash a boot image to get your atrix to boot into OS again, follow this http://www.android-advice.com/2012/flash-the-motorola-atrix-4g-back-to-stock-4-5-91-rom/ if you break your wifi like I did, just follow "Alaq's" Moto-Fastboot: Stock Restore. http://forum.xda-developers.com/showthread.php?t=1421522 or you can just flash the 2.3.6 from this https://sites.google.com/site/motosbf/atrix-sbf-files using rsd lite, open rsd lite, turn on your atrix and connect to your computer, you'll see rsd will still recognize your atrix, then flash the sbf file.
Sent from my Atrix 4G
Too many problems on here result from the people that don't read. You have eyes for a reason!
I'm in Thailand. My phone is show FAILED TO BOOT 0x1000 for 3 second then black screen. Is my phone paper weight or not?
term4802 said:
I'm in Thailand. My phone is show FAILED TO BOOT 0x1000 for 3 second then black screen. Is my phone paper weight or not?
Click to expand...
Click to collapse
This isn't very specific. Can you get a picture?
seem that u have bricked your [email protected]@
Sent from my MB860 using Tapatalk 2
nerfman100 said:
This isn't very specific. Can you get a picture?
Click to expand...
Click to collapse
Thank you for your kind. sorry I am new XDA's user . my clip in youtube
/watch?v=muujX75TVm0
Eek. I'm not sure if you can solve this. If holding Power+Volume Down after the green light shines displays the word Fastboot, there might be hope.
Thanks
eowyn said:
Lol! Don't panic, I just got out of the same situation a few hours earlier. Get your atrix into fast boot mode by pressing power and vol up buttons while placing the battery. Then proceed to unlocking your bootloader. Flash a boot image to get your atrix to boot into OS again, follow this http://www.android-advice.com/2012/flash-the-motorola-atrix-4g-back-to-stock-4-5-91-rom/ if you break your wifi like I did, just follow "Alaq's" Moto-Fastboot: Stock Restore. http://forum.xda-developers.com/showthread.php?t=1421522 or you can just flash the 2.3.6 from this https://sites.google.com/site/motosbf/atrix-sbf-files using rsd lite, open rsd lite, turn on your atrix and connect to your computer, you'll see rsd will still recognize your atrix, then flash the sbf file.
Sent from my Atrix 4G
Click to expand...
Click to collapse
Exactly...I too tried to flash my phone, OS got corrupted and followed the same procedure to recover my phone, without any single data loss I got back my phone.
Main thing that we want to note while flashing the phone is Version of the flash file which we are trying to flash, if it is downgraded version then there is 80% of chance for OS corruption. so before flashing check the version.
It's a softbrick
get into fastboot using volume rocker keys.
use command line on windows
fastboot oem unlock
fastboot oem unlock ################
done.
Thanks,
Jinesh

[Q] Need help simi/bricked motorola electrify

Sorry i did not have the kernel or most information about the phone but ill explain the problem if anyone can help out it'd be a blessing
i have a U.S cellular Motorola electrify running 2.3.5 ( which recently found out was unrom-able)
i got it rooted using one touch method--
Then not thinking -- ( ive rooted and installed roms on other phones never a Motorola) didn't know it needed a unlocked bootloader to function and get roms installed.
i knew i needed a clockworkmod on the phone and i read about the app that boots into clockworkmod bootstrap--apk
did that and it worked--
here is the problem..
didn't install the bootloader.. and tried installing Cyanogenmod10 unofficial rom from photon development forum
rebooted-- got Failed to Start2- starting rsd mode -- if i dont press anything
if i press down it says NV recovery but does nothing
if i press UP it goes into Starting usd recovery ( sorry not exact words not with my phone at the moment)
ive been reading guides.. downing the lock unlock from the bricked guide.. RSD lite would read the phone in the usd recovery
try flashing the offical us cellular back but get an error
wont show up in command prompt
not sure what to do.. please help its hard to function without a phone i hope its not fully bricked
Can you get into fast boot by pressing power and volume-down? If so, you just need to wipe everything using "fastboot -w" and rebooting into RSD mode to flash the uscc sbf.
When you flashed cm10, the kernel is not compatible with the bootloader you're on.
If anyone has the 2.3.5 electrify boot.img, you could probably flash it through fastboot if it'll let you
Sent from my sunfire using xda premium
hoslayer13 said:
Can you get into fast boot by pressing power and volume-down? If so, you just need to wipe everything using "fastboot -w" and rebooting into RSD mode to flash the uscc sbf.
When you flashed cm10, the kernel is not compatible with the bootloader you're on.
If anyone has the 2.3.5 electrify boot.img, you could probably flash it through fastboot if it'll let you
Sent from my sunfire using xda premium
Click to expand...
Click to collapse
Thank you for the reply.. when I press volume down and boot on it says " nv flash mode" then turns off unless hooked in a computer then just stays on that screen
If I press volume up and turn on it says fast boot protocol support and Is half recognized in rsd ITE
If I just power no volume press on it says failed to boot 2 starting RSS mode..
I'm sort of new to everything and need more details.. tryed wiping using fast boot u downloaded but gives error.. same with flashing yes cellular sbf in RSd lite trying all 3 button combos that work
Please I need this phone working.. I messed up someone's phone saying I could put cm10 it for Christmas! Any help would be awesome

[Q] Xt910 charging problem and consumer id error

I'm a second user of this phone, and the user before me tried to flash a rom from some other phone and it won't boot or access recovery, now when I connect phone to the wall charger it displays:
Consumer ID error. Contract Dealer
Boot to suspend/TCMD mode:dead:0007:00000000:000000cc (I will attach pics.)
After 6-7 sec it goes off. When it's connected to PC the white led is on, but when I try to turn it on or access recovery the led goes off.
I've seen posts with Consumer ID.... 0004 but nothing about 0007..
Yesterday I've tried to charge it with wires while charger being plugged in wall, it sat there for hour and half and after that still couldn't boot, and when again plugged to normal charger it displayed same error again. What should I do?? Please help!
can u boot to bootloader menu (which has options like ap fastboot recovery etc)
this error means its cid is erased, ask ur seller if he got backup of cid, also whats the region of the phone, us uk and last time which rom was it using ics or jb
---------- Post added at 09:53 AM ---------- Previous post was at 09:53 AM ----------
can u boot to bootloader menu (which has options like ap fastboot recovery etc)
this error means its cid is erased, ask ur seller if he got backup of cid, also whats the region of the phone, us uk and last time which rom was it using ics or jb
faheemakbar18 said:
can u boot to bootloader menu (which has options like ap fastboot recovery etc)
this error means its cid is erased, ask ur seller if he got backup of cid, also whats the region of the phone, us uk and last time which rom was it using ics or jb
---------- Post added at 09:53 AM ---------- Previous post was at 09:53 AM ----------
can u boot to bootloader menu (which has options like ap fastboot recovery etc)
this error means its cid is erased, ask ur seller if he got backup of cid, also whats the region of the phone, us uk and last time which rom was it using ics or jb
Click to expand...
Click to collapse
Would that be power+vol down+vol up?
He didn't back it up, it is from US , and I am in Croatia, the last one was JB.
^^ yes it is then select BP tools and boot Then Root the phone and install bmm it will bypass CID error
3n3rg1c said:
^^ yes it is then select BP tools and boot Then Root the phone and install bmm it will bypass CID error
Click to expand...
Click to collapse
I can't get to the bootloader. Can it be due to dead battery or maybe dead mobo, because the guy flashed the rom of other phone, could that maybe kill it, because of other voltage and cpu frequency's? Or it could it be the usb cable(it worked before cutting). Should I try with plugging it in PC instead? Thanks.
I've charged it for few minutes with normal charger and now it starts randomly and displays Consumer ID.... and when I put it under my shirt I can see that screen lights green and it has some black spots, and it's not visible at light. This is what I now get when I connect phone via usb..
After installing software loading, it fails right when screen gets on and displays message Consumer ID..... With RSD lite 6.0 I actually managed to detect device, also until screen gets on.
Hi how can root device launched only after in bp menu?
Try this guide : http://forum.xda-developers.com/showthread.php?t=2372614
It had helped me!

[Q] HELP / PROBLEM - Fastboot Loop and Error flashing with XT910

Hi all, so i´ts my first time here posting but I´ve been following this forums long ago and touching stuff with my phones.
Today (well today... i´m working on this since yesterday) I´ll need the help of the most veteran users since I can´t solve this on my own.
I Have an XT910 Razr Moto. Yesterday I charged it with it being off, but to my surprise when I powered it on, I got the Fastboot screen saying the device is locked. Here´s the complete error:
-----------
AP Fastboot Flash Mode (S)
0A.74
eMMC Info: Size 16G
To return to normal mode - first press power key to power down
Device is LOCKED. Status Code: 0
Battery Ok
Ok to Program
Connect USB Data cable.
-----------
So, after getting this, obviously I thought, well, power off, or force power off, then power it on, and lets go... Well, nothing, I constantly get into Fastboot again.
What I figured out is that if I power it off, then hold vol down + vol up and power at the same time, I actually CAN get into boot menu but It will not let me select anything, it will just show it and boot in Safe Mode for me.... Tried factory reset also, so i could backup everything...
After going through all that I decided to give it a try and go for RSD with stock firmwares from sbf.droid-developers.org. I got like 4 and they all stucked at cdt.bin flashing part... Giving me an error about 6/18 process that can´t flash cdt.
So far I´ve tried LOTS LOTS of stuff like some .zip going around there to fix the CDT, with no luck...
THen I ran into this post
http://forum.xda-developers.com/showthread.php?t=1651596
Which was very usefull to have some progress, like completing the flash by erasing some lines in the xml about the cdt. system (cause it hung a lot there and gave error again)...
However, the error still persists, I boot up my damn phone and it goes into AP Fastboot. When i go into Safe Mode I see that everything has been wiped so its like a factory phone now, but still in safe and powering it off won´t make the difference.
I´m kinda desperate and about to throw this phone out of the window. Is there any pro savior out there who can give me more tips?
Thanks!!!!!!!!!
-Musashi- said:
Hi all, so i´ts my first time here posting but I´ve been following this forums long ago and touching stuff with my phones.
Today (well today... i´m working on this since yesterday) I´ll need the help of the most veteran users since I can´t solve this on my own.
I Have an XT910 Razr Moto. Yesterday I charged it with it being off, but to my surprise when I powered it on, I got the Fastboot screen saying the device is locked. Here´s the complete error:
-----------
AP Fastboot Flash Mode (S)
0A.74
eMMC Info: Size 16G
To return to normal mode - first press power key to power down
Device is LOCKED. Status Code: 0
Battery Ok
Ok to Program
Connect USB Data cable.
-----------
So, after getting this, obviously I thought, well, power off, or force power off, then power it on, and lets go... Well, nothing, I constantly get into Fastboot again.
What I figured out is that if I power it off, then hold vol down + vol up and power at the same time, I actually CAN get into boot menu but It will not let me select anything, it will just show it and boot in Safe Mode for me.... Tried factory reset also, so i could backup everything...
After going through all that I decided to give it a try and go for RSD with stock firmwares from sbf.droid-developers.org. I got like 4 and they all stucked at cdt.bin flashing part... Giving me an error about 6/18 process that can´t flash cdt.
So far I´ve tried LOTS LOTS of stuff like some .zip going around there to fix the CDT, with no luck...
THen I ran into this post
http://forum.xda-developers.com/showthread.php?t=1651596
Which was very usefull to have some progress, like completing the flash by erasing some lines in the xml about the cdt. system (cause it hung a lot there and gave error again)...
However, the error still persists, I boot up my damn phone and it goes into AP Fastboot. When i go into Safe Mode I see that everything has been wiped so its like a factory phone now, but still in safe and powering it off won´t make the difference.
I´m kinda desperate and about to throw this phone out of the window. Is there any pro savior out there who can give me more tips?
Thanks!!!!!!!!!
Click to expand...
Click to collapse
What fastboot files did you tried to flash?Were you on ICS or JB before the brick?Where are you from?
Error 6 means that you are trying to flash wrong firmware,for example,you was on JB and now you want to flash ICS.
Here are JB Fastboot files http://forum.xda-developers.com/showthread.php?t=2231289,just flash one for your region.
welder73 said:
What fastboot files did you tried to flash?Were you on ICS or JB before the brick?Where are you from?
Error 6 means that you are trying to flash wrong firmware,for example,you was on JB and now you want to flash ICS.
Here are JB Fastboot files http://forum.xda-developers.com/showthread.php?t=2231289,just flash one for your region.
Click to expand...
Click to collapse
I´m from Argentina. And you are totally correct, I downloaded FB files for 4.0.4 , but now I tried running the phone in Safe Mode, went to sys info to take a look at it. And found I have 4.1.2
So question is, from that list you gave me, the "Retail Brazil" should do it? as well as UK retail or any other?? Which one should I chose
Thanks!!!!!!!! a lot
welder73 said:
What fastboot files did you tried to flash?Were you on ICS or JB before the brick?Where are you from?
Error 6 means that you are trying to flash wrong firmware,for example,you was on JB and now you want to flash ICS.
Here are JB Fastboot files http://forum.xda-developers.com/showthread.php?t=2231289,just flash one for your region.
Click to expand...
Click to collapse
Ok so I have made quite a progress here. I was able to get a Brazilian version which is from LATAM and RSD flashed straight like a charm. Now I have the clean new firmware.
And even I can read in the fastboot 0A.77 instead of 0A.74 version
HOWEVER: problem with the Fastboot still persists. Even the phone itself when it restarts goes into Fastboot and when I´m able to make a boot menu I can´t choose anything and it goes directly to Safe Mode.
Now that the system´s """""fixed"""" and I could flash it.... Any tips on taking this off? I cant start the phone in normal mode :S

Categories

Resources