[Q] HDMI Input - HTC Amaze 4G

My question is, is it possible for the Amaze to use It's HDMI capabilities as an input? The reason being is I was curious if I would be able to use the Amaze as a field monitor for my DSLR. I understand that the adapters you need to use require a power source but I'm sure It's nothing a battery pack can't handle. Thanks in advance.

Yes it is possible but will require some hacking. Anyway thanks. It will be a nice feature to have in the project I am now leading
Sent from my HTC Amaze 4G

What sort of hacking?

Related

HTC Evo 3d sense ui

I have read that the bluetooth stack is not same as og evo. I am curious if anyone had info on this. If it its true it might and I stress might allow us to use bt devices such as wii or ps3 controllers. Now with full hdmi mirroring this could make for the ultimate gaming phone for those into emulation. What are ur thoughts?
Sent from my PC36100 using XDA App
Vvlioncourtvv said:
I have read that the bluetooth stack is not same as og evo. I am curious if anyone had info on this. If it its true it might and I stress might allow us to use bt devices such as wii or ps3 controllers. Now with full hdmi mirroring this could make for the ultimate gaming phone for those into emulation. What are ur thoughts?
Sent from my PC36100 using XDA App
Click to expand...
Click to collapse
Sheer joy, if it's true.
Any knowledge or opinions would be much appreciated.
Sent from my PC36100 using XDA App
i use a wiimote on my evo4g now. Just have to run an AOSP rom not SENSE.
I love the idea of emulating from my phone like I do now, playing Final Fantasy 3/6, 7, Tactics with a wiimote is already epic on the phone, couldn't imagine on a huge TV so easily now too. I ned a tv worth it though.
I have not found any custom roms I trust enough to void my warranty for. I have ran cm6 and cm7 and I did like them but as many phones as I have went through especially my hero last year ill stick with stock sense and hope evo 3d will allow such bt devices such as wii or ps3 remotes to work
Sent from my PC36100 using XDA App
what does the thread title and the OP have to do with each other?
The Evo 4G supports bluetooth profiles like A2DP for wireless stereo headsets, and FTP and OPP (object push) for file transfers. But when it comes to connecting an interface device, it does not support bluetooth HID (human interface device) profiles. It only supports SPP (serial port protocal).
Which is why things like the MSI BGP100, and the FreedomPro Keyboard work with it. Both of these devices use SPP bluetooth profiles. Drivers were created and released in the market, and a stock Evo 4G can connect to these.
Everyone blamed the HTC Sense interface for why we couldn't connect HID devices, (Wii Mote, and several keyboards, mice, etc). Which is why the OP mentions Sense 3D, because he still thinks it was sense that did it. It wasn't actually Sense that did it. HTC just never built bluetooth HID profiles into the phone.
AOSP roms don't have sense, but they are also built from ground 0, so they have HID profiles built into them. A lot of people have mistakenly thought that it was taking Sense completely out, that brought bluetooth HID back in, but it was really just coincidence.
For example, iPhones don't come with HID profiles, but someone in Cydia released an app that alters the bluetooth stack for you, and adds additional profiles. Theoretically, someone could have done this for the Evo 4G, but no one has yet.
That being said, I have seen several sites, including HTC's own, showing bluetooth HID under the specs for the Evo 3D. This isn't something I was ever able to find for the Evo 4G.
Don't quote me on it, but I am banking on all the WiiMote apps, bluetooth keyboard apps, and any other bluetooth input device, working properly with the Evo 3D right out of the box.
Thank you bradley. that is exactly what I was curious about. u answered my question and educated me at same time. that was much appreciated.
Sent from my PC36100 using XDA App
Vvlioncourtvv said:
Thank you bradley. that is exactly what I was curious about. u answered my question and educated me at same time. that was much appreciated.
Sent from my PC36100 using XDA App
Click to expand...
Click to collapse
No problem. If you get a chance, hit my thanks button.

USB Host Possible?

Does anyone have specs of the Evo 3D processor to determine whether or not this might be possible in the future? My friend has stated that Android 2.3.4 has USB host built into the operating system. However, the hardware has to have that capability.
So does our processor have the capability for USB host mode, and was our micro USB wired to allow it? Anyone know for sure either way?
I'm sorry if this was brought up before, I've actually done an extensive (unsuccessful) search on the topic.
I know you can do this with honeycomb. Wouldnt see why we couldnt do it with the evo. Any devs have any idea
No one know for sure if the hardware is capable? To be honest, I consider that the only definite advantage the SGS2 has right now.

RAID? Bluetooth 3.0 capabilities?

Forgive me if these questions are elementary or if they don't even make a lot of sense. I'm not claiming to be a hardware genius by any means, in fact I'm quite the opposite.
My first question is whether or not it is possible on an android device to RAID the internal partitions in any formtat? I think this would require two flash sources and my question then is whether or not, if the hardware was theoretically able to support it, the operating system would support a situation attempting to boost read/write speeds utilizing a RAID setup. Maybe there isn't even a benefit to doing this with flash? If there is, what would be some of the benefits, and conversely, drawbacks of this?
The next question I have is what the capabilities of bluetooth 3.0 are. Specifically, can BT 3.0 be used for 1080 video playback? And can BT be used in something like fastboot?
Thanks in advanced to anyone willing to field these.
Sent from my Gummy Charged GBE 2.0 using XDA App

[Q] External Touchscreen Display

For the past few days I have been racking my brain and searching multiple forums for the answer(s) and I finally turn to XDA to hopefully help answer.
The thought: I would love to be able to take my DroidX connect it via HDMI to a 7" monitor in my car to have a nice view of the navigation, access to my music and all of the other items that the phone has to offer (which include data connection and accurate GPS). Sure I can buy an android based headunit or build a carPC but why when I have what all of that has to offer in my pocket? Then I got to thinking, to take it a step further, why not use a 7" touchscreen monitor so that I am not just passing video and sound via the HDMI but that the monitor registers touches to the phone.
WebTop is a great middle of the road solution as it would output the HDMI and allow the user to utilize the phone as the mouse touchpad on the screen. Sadly it is only offered for a select few phones. So on to my questions.
1. Did I some how miss a WebTop project being worked on that would do what I am talking about?
2. Am I wrong in thinking that drivers need to be worked out depending on the phone AND which 7" TS was used?
3. Most, if not all, android phones have video out capabilities, so outputting to the screen would be workable, but is there a better way to get the input hurdle worked out.. not a question just an open suggestion box.
Looks like a few more days or looking would have helped. Customgadz has what I need.
so what did you find? I searched for Customgadz, with no results. did you use hdmi mirroring with Android, or does this work with webtop?
Looks like the australian website has a solution to control an android device with a 4 wire external touchscreen using a module.
search for "customgadz remote touch"
Only pre-order now and the website states they start delivering end of januari

How to add USB OTG Host capabilities to a kernel?

Right now, I'm using an HTC EVO 4G LTE, running ICS. Now the source code is out, however, no one has yet to add USB host capabilities to their kernel, so I figure I might as well do it myself. I read on kernel development, and I have a surface level understanding, but I'm just interested in adding the USB host capabilities. So how would I go about doing that? Thanks.
IIRC ICS should have OTG that works for keyboard and mouse. Of course the microUSB port on your phone needs to have the hardware to support OTG and also may or may not supply power.
Yeah, the hardware on the EVO supports it, it's just that HTC never enables it in their kernel.

Categories

Resources