[Q] Xperia X10 Wifi Connection - XPERIA X10 Q&A, Help & Troubleshooting

Hi all,
I got my Xperia X10 July 2010.
I updated from 1.6 to 2.1 and 2.3.3.
For 1.6 and 2.1, my wifi was working very fine, but it got problem after i updated to 2.3.3.
I connect to wifi once, then after off it and on again, it will keep on scanning.
Sometimes i off and on then can geet connected. But it take a long long time.
I try to flash back 2.1, then wifi very fine, but update again, same problem come to me.
Urgent need help.
Thank you.

That's a weird issue. You can try flashing another ROM (It could be a corrupt download), repair with SEUS or check your router.

yii3 said:
Hi all,
I got my Xperia X10 July 2010.
I updated from 1.6 to 2.1 and 2.3.3.
For 1.6 and 2.1, my wifi was working very fine, but it got problem after i updated to 2.3.3.
I connect to wifi once, then after off it and on again, it will keep on scanning.
Sometimes i off and on then can geet connected. But it take a long long time.
I try to flash back 2.1, then wifi very fine, but update again, same problem come to me.
Urgent need help.
Thank you.
Click to expand...
Click to collapse
out of curiosity what router are you connecting to (model / as much info as you can give me) there have been a few issues like this and i am trying to find out why.
Pvy.

My wife has the same issue, on any custom 2.3 ROM she's tried but it's intermittent. Haven't tried going back to 2.1 to see if it's any better.
It happens with our Orange Livebox, and her Dad's SKY router (not sure of the brand)

thank for reply.
i tried with stock rom 2.3.3 also same problem.

Try reflashing it us sony ericsson pc companion.. Then click on support zone and click repair..
Sent from my X10i using xda premium

Related

I just rooted my x10a, so...

First, I followed this guide here: Newbies Guide to Rooting X10 and giving you the newest firmware!
I went through all the steps except for the market fix, because I had no problem with it. The only problem I had was that dumb java error, but that was no problem.
I am enjoying this x10 ALOT more. The touch screen seems more responsive, or atleast the keyboard usage is SO SO much nicer, and the new interface over SE "Home" is a lot nicer.
I have a few questions.
1. My x10a, rooted, still says "x10i" even though I did that last patch thing that was supposed to fix it. Will it hurt my phone to state it is a x10i instead of an x10a?
2. My firmware version states 1.6. Is this normal or am I supposed to show 2.1? Is my next step to run SUES and do the actual update?? Or do I already have the update? I have the 5 home screens.. wasn't that in the update? <-- confused
3. I knew I would lose my camera/video capabilities. Are we close to receiving a fix soon?
I found that when I enter the default contacts app, I could use the camera via "edit contact>add photo>camera". That is better than nothing!!
4. I installed debranded generic firmware?
..X10a and X10i are nothing special different (no need to worry)
..Run SEUS or flashtool for 2.1
..Use camera illusion if you want 2.2 from Z
..only with flashtool is debranded firmware
Hope this helps.
iMatth3w said:
..X10a and X10i are nothing special different (no need to worry)
..Run SEUS or flashtool for 2.1
..Use camera illusion if you want 2.2 from Z
..only with flashtool is debranded firmware
Hope this helps.
Click to expand...
Click to collapse
@iMatth3w
Thanks for the info
Incidentally, I managed to get the the camera/video function back along with mediascape player. I can't believe ATT would butcher this phone like they did.
u lost camera and camcorder after updating to 2.1 ?
what why ?
lol....nothing like that happened to me.
i lost camcorder on 2.2 but videocam illusion fixed that.

[Q] Voice control & WiFi Issues on 2.3.3

I updated an X10a yesterday from 2.1 to 2.3.3 generic originally for X10i
The flashing was OK and the OS is working fine, but there are some issues. The Wifi works from time to time, the voice control isn't working (I don't know if that's because I have to download it from Market or it's integrated).
What can I do?
If I would like to change the firmware, which one is working fine and you recommend?
Thanks,
PS: Is there any guide to give a lookout on the themes thing?
WiFi doesn't work with me either.. This problem was from the beginning of official 2.1.. my wifi can't support WPA/WPA2 host..
with the provided 2.2 ROM's here, it works like a charm, but now after the official update 2.3 it doesn't work any more

[Q] xperia x10 mini pro wifi problem

hello all
i have a xperia x10 mini pro running 2.3.5 gingerbread mini cm7 pro v13 final custom rom,
recently i noticed my wifi messes about and i dont know whats the problem,
it used to work before,
now it either goes in a loop ( connecting, disconnecting, scanning)
, it simply just says error and when it does connect after few min the connection drops,
would anyone able to help me with this problem
i tried barnacle, blade wifi fix, wifi fixer etc...
kashem58 said:
hello all
i have a xperia x10 mini pro running 2.3.5 gingerbread mini cm7 pro v13 final custom rom,
recently i noticed my wifi messes about and i dont know whats the problem,
it used to work before,
now it either goes in a loop ( connecting, disconnecting, scanning)
, it simply just says error and when it does connect after few min the connection drops,
would anyone able to help me with this problem
i tried barnacle, blade wifi fix, wifi fixer etc...
Click to expand...
Click to collapse
you're right wifi doesn't work on v 13, but now in v 16 worked perfectly.
is the v16 final?
theres new versions every second hard to keep up!
kashem58 said:
is the v16 final?
theres new versions every second hard to keep up!
Click to expand...
Click to collapse
No, v 16 is the pre-final.
but so far everything is working perfectly, you should try it.

[Q] X10 Mini Pro, MiniCM7 Pro v21 and Parrot ck3000 problems

Hi everybody
I have a problem with Cyanogen MiniCM7Pro v21 ROM and my CK3000 evolution. They pair and connect, spearkes and microphone work, so I can talk with them, but buttons in the parrot don't work, I have to pick up and down calls pressing on the phone the screen.
Comment that before installing this ROM, with the latest original firmware (2.1) it worked perfectly. Parrot has the 5.25c firmware version (it has been installed a month ago) and I already tried to reset its memory and reconnect devices, but nothing works.
I suppose it is a problem in the ROM, but I am not sure about.
Could anybody help me?
Thanks
PD: Sorry about my english, it is not my natural language
hi. It worked for you on 2.1?
On MiniCM7 Pro there can be problems. Try SonyStyle
paul-xxx said:
hi. It worked for you on 2.1?
On MiniCM7 Pro there can be problems. Try SonyStyle
Click to expand...
Click to collapse
Hi Paul, sorry for answer so late, and thanks for the help.
With the original firmware 2.1 it worked perfect, and if I restore it with the CWM it works again.
Now I have installed your latest version of SonyStyle and the ck3000 still doesn't work right. Buttons don't work. The same as MiniCM7 Pro.
Is there any way to restore old bluetooth tools or something similar?
Well
A long time ago has this thread started, but I have some news.
Parrot ck3000 buttons are working (at least the red one). I don't know which one was the difference but they started to work this time, the last one I tried to instlall MiniCM7 Pro v21.
The only difference I found, maybe, is that this time I wiped every possible thing with the clockworkmod options and after installing the rom I restarted a couple of times the phone before synchronising it with the bluetooth. I don't know if it has been the thing to fix all.
I have to say that I tried to install several times this ROM and there were times that things did not work propertly, like the screen, and it was becaus I used xRecovery to install it and not CWM. But I am pretty sure that the last three times I tried to install it was with CWM and only the last one works with the handsfree.
That is all, I hope somebody else could find it useful.
Thanks for all, specially to Paul-xxx

[Q] Wifi and bluetooth problem

Hello all,
My friend has a sony xperia ray.
When he's trying to turn on the wifi, it says "connecting" and after a while it disconnect automatically.
The same thing is happening with the bluetooth.
Does anyone else have this problem?
At the time, he was running gingerbread 2.3.4. He updated to ICS 4.0.4 but the problem still exists.
He told me that he dropped his phone and that problems began after that.
If that's the case, does anyone have a disassembly tutorial which shows where the wifi and bluetooth modules are in the phone? I searched on youtube, but it didnt say where the modules where.
Thanks in advance..
irvan90 said:
Hello all,
My friend has a sony xperia ray.
When he's trying to turn on the wifi, it says "connecting" and after a while it disconnect automatically.
The same thing is happening with the bluetooth.
Does anyone else have this problem?
At the time, he was running gingerbread 2.3.4. He updated to ICS 4.0.4 but the problem still exists.
He told me that he dropped his phone and that problems began after that.
If that's the case, does anyone have a disassembly tutorial which shows where the wifi and bluetooth modules are in the phone? I searched on youtube, but it didnt say where the modules where.
Thanks in advance..
Click to expand...
Click to collapse
1. which kernel u use? stock(installed by sonys pc updater ) or custom (have to be downloaded and flashed)
2. how he updated the rom?? orginal with a sony program or u use cm9/custom ROM???
if u on stock(from sony) 4.x.x ROM AND kernel, u can flash stock_ics_wifi_modules (search on forum; b'cuz i'm unable to share links at now:silly
then wipe dalvikcache/cache THEN wifi must work!!!, otherwise its a hardware or very,very strange problem...
----> hope it helps.

Categories

Resources