[MOD] [AD2SDX] Increase Internal Memory of XPERIA NEO - Sony Ericsson Xperia Neo, Pro

After hours of experimenting... finally... AD2SDX on XPERIA NEO
thanks nakchea for informing me about init.d support
thanks for adiktz for informing me about ext4 as requirement
and thanks to adridu59 for answering many of my questions
thanks for the developer of this mod
original thread by amarullz
http://forum.xda-developers.com/showthread.php?t=1310309
and to ShyamSasi
as my basis that this will also work on or XPERIA NEO
http://forum.xda-developers.com/showthread.php?t=1333379
heres the port of this MOD for NEO.
REQUIREMENTS:
-Bootloader Unlocked
-Inteks Kernel
-Stock .42 rom of xperia NEO
-Root
-Busybox
-CWM
-sd card with 2 partition (for normal use of sd and the other one is EXT4)
-make sure u put this mod on your sd card after making 2 partition
-remove your sim card (ill xplain later why [Note1])
PART 1
ok heres what i did
I have my .42 rom, i installed root, busybox & cwm here.
I reboot my phone to CWM recovery
clear/format data, cache, sd-ext
Then i make a Backup of rom (its a fresh rom now cuz u format data, cache, sd-ext)
Then i format system after backup (so everything is clear now - system, data, cache, sd-ext)
PART 2
Then restore/flash your rom again using CWM.
After restore dont exit CWM without flashing this mod. (You should flash your clean rom and this mod on the cmw recovery at the same time)
PART 3
then boot.
first boot will bootloop 4-7 times then it will boot normaly. [Note1]
restart phone. it will bootloop again 4-7 times.
then look at your appmanager.
you'll see its working...
you can now insert your sim
----------------------------------------------------------------------------
[Note1] ok heres why we need to remove sim card
At the moment after normal booting
"WITH" sim card - boots into this (look at first picture below) without no progress, you will stuck in here.
To prevent this we must remove sim
"WITHOUT" sim this will happen again but only for 3-5 minutes then it will bring you to your homescreen
after 2 sucessive boot, you can now insert your sim and everyting is normal now with this mod
look at the second picture for the result...
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

So finally you've got it to work... congrats!
Sent from my MT15i

Does it work with other kernels or it only works on inteks kernel?
Sent from my MT15i using Tapatalk

Ok I have a problem here, I tried to format everything again via cmw and im trying do it again for verification that this is realy working.
But why it bootloops again continuosly,abt half an hr waiting but it bootloops only. thats the question I wil try to find out. Am I just lucky to do that Yesterday night? Or theres a bug? Or I just did somting wrong now I tried it again? This project is not yet perfect but everyone can try. Post here your xperience using this mod. If sumone can make it work again, please share things on how u did it. Thanks.
To protocol11, just found some info that for this to work, u need a kernel dat suport init.d and ext4.

Lin2SD is more easier

Link2sd links only apk and dalvik. But with dis mod the data partition can be moved at sd card. Look at the 2nd pic of my post, dont u want to have that storage? U can resize dat dpending on how much partition u made on ext4.

I have only got this to work a few times also / more times ending up with strange results
Sent from my MT15i using xda premium

this script was not stable that's why i settled with link2sd

ok thanks to your comments, so its not only me xperiencing this effects. ok i'll try to find out some solution for dis to work on just a first try.

Does it bootloop everytime we restart phone or just first few times?

apps in internal memory is much stable and battery saved than in card. so no need to move all data to card,especially data in /data/data . move apk and dalvik is enough

Flash neo v ftf excluding kernel.. That will increase internal memory

What's the problem with link2sd?
It's much better.
Sent from my MT11i using xda app-developers app

what about internal 400mb partition...

You could try to root the device and make the complete installation in that SD card or limit u r memory space and also try making a separate partition .....
Sent from my Xperia U using xda app-developers app

Hmm how about this?: http://forum.xda-developers.com/showthread.php?t=1716124
But i did not try it in GB rom yet. I only tested it in ICS and 4.1.2 SJB rom(it works)..
For me Linus Torvalds is the greatest man on earth

Hi, I using CM 10 and Fusion 5.5 kernel.
But mod not work. Please help me.
My rom : http://forum.xda-developers.com/show....php?t=2111941

ncdtkrts said:
Hi, I using CM 10 and Fusion 5.5 kernel.
But mod not work. Please help me.
My rom : http://forum.xda-developers.com/show....php?t=2111941
Click to expand...
Click to collapse
you can try link2sd, its more easier

shinubie said:
you can try link2sd, its more easier
Click to expand...
Click to collapse
How will i do? Please help me.

Related

data2sd with 1GB storage! (Experimental! Try on your own)

has anyone tried a bigger data.img than 512MB?
using this tool to resize the data.img to say 1GB, with z's script?
I have just created a 1 GB img and testing it on wolf's latest v05 with 53 patch!
I will update if anything goes wrong! so far looks safe!~
I have just created an xrecovery with 1GB. it's basically z's script with data.img resized to 1GB.
All the credits to Z and the other dev's who involved in data2sd development.
Steps: (You should install this with a fresh ROM installation, don't flash in xRecovery on a previously installed ROM)
free x10 z's rom:
1, Boot into xRecovery, do a factory reset, clear cache and in advanced wipe dalvik and battery stats.
2, Install FreeX10-beta4.zip through xRecovery
3, Reboot and wait until radio and data works(it may reboot autmatically)! don't boot into xRec until you saw the radio working and it's stable.
4, Do nothing now just boot into xRecovery and install the gapps_FreeX10.zip via xRecovery don't reboot install the FreeX10-data2sd.zip without rebooting.
5, Reboot and wait for sometime till it settles down. Then install all the hotfixes, patches, new market etc.
wolf's rom:
1, Boot into xRecovery, do a factory reset, clear cache and in advanced wipe dalvik and battery stats.
2, Install CM 6.1.3 [v05].zip via xRecovery
3, Without rebooting install the CM Update v053.zip
4, Now install the FreeX10-data2sd.zip without rebooting.
5, Reboot now and wait for somtime till it settles down. Then you can install all the patches, themes and new market etc.
If you reboot in between, you'll end up in a reboot loop. So don't reboot before installing data2sd while installing wolf's rom! In z's freex10 reboot only once after the rom.
Don't restore data from xRecovery. Do a fresh install for optimal performance.
Even though I am testing with a Class 2 SD, minimum of class 4 or 6 is recommended
also I'm following this method to bulletproof my launcher!(Experimental try on your own, and please don't modify this file.)
I've attached the local.prop
use
"adb push local.prop /data"
or you can try installing using the zip file for xRecovery!
(I would suggest using the adb method)
Disclaimer: I am not responsible for any damage to your phone or data loss. Please do a complete backup of your sdcard and apps before trying it out.
note to mod's: please move this to dev or app threads if it's not appropriate in Q&A
Good luck on your quest.
Can you try if it work on Series 2 SD?
FYI! I am right now testing on my old class2 card only!
any good news?
will post the screens of benchmarks soon!
here are the screens!
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
score might've take a hit due to class2
my class 6 8GB used to give me in the region of 2600 in quadrant.
this is my titanium, here you can see the internal storage space!
This seems great. NOW IS THE BIG QUESTION: HOW IT HANDLES WOLFBREAK ROM???
Does it lags or freezes as Z data2sd?
it's running smooth with no crashes almost for around 18 hours! the no crash and smoothness may be due to wolf's effort as well.
I am running the bulletproof home tweak and imported the fugu's tweak files in the rom zip of wolf.
when you are ready I can give it a try!!!
can you make it just Z zip file so I can installed it via xrecovery?
updated the zip files on my first post!
I am having some problems here. I got no service after installind data2sd.
plus now you cannot unmount sd card as the phone just reboot itself.
you installed data2sd on a fresh rom or a previously installed rom?
i followed your procedure letter by letter. i have been installing, flashing ROMS since I enter to XDA.
Still, now I am trying to give it a second chance. but the fact that the rom get's installed in the SD, mounting SD in PC will make the phone reboot.
go into xRec and partition tools, mount usb storage!
delete the data.img in the xRecovery folder!
no the ROM is not installed in SD, it's only the data partition...
ok. Just trying it once again. hope better luck this time
Still I do believe that you have done a great job.
p.s got service now. trying with the rest how it reacts etc etc etc. i also downloaded and installed your prop file.
oh okay! that's good! which ROM you are testing with?
if still it's not working, download the data2sd again from the first post! I have added a new file.
I am using Wolfbreak last rom. with respective update...
I am also using the wolf's rom! it's working fine for me.
hope you are understanding that this is all testing stuff!
data2sd will put more strain on your sd card than app2sd or others. just test this on your old/soon to be dead SD! if you like the performance and stability then try this on your regular SD!
Erm. sorry...i just wan ask sth b4 trying it. I tried data2sd(without changing anything) using class2...and it lag like hell.
So..by changing the storage, or size like u did, is there any laggness? or isit smooth n fast?
I am planing to buy a 32gb class 10 card very soon.
what's the joy of trying something new if you can not from the old experiences and mistakes

fixed internal memory/market problem (cant install apps)

hi guys
the one day i was using minicm7pro v21 with zp kernel
i switched to try flame.gdx ics did all the wipes but surprised that some of the apps still there and when i tried to update any i had to remove then reinstall
i switched to stornmix v2 and then the same apps where there and cant install anything from the market
i tried going back to stock kernel and then rom+kernel
i still cant , i went back to gdx v17 and now on gentonic.se 2.5.1 (the apps where always there) i tried delete them and the flash rom again i install sm apps , the same !!
i installed sm apps and then the same i cleared cache/dalvik cache i tried marketfix and the method here http://forum.xda-developers.com/showpost.php?p=16038744&postcount=13 (or smthn like it)
nothing works i always end up the same place , please please i need help
sm times i get " the package file is invalid " and others " insufficient storage available "
solution :
go to cwm recovery
in mounts and storage
i unmounted the sd card (u have to format it on ur pc then)
later i formated the sd and the sd-ext and the cache from the same menu (mounts and storage )
its working like charm now
here is screens
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Hey
Have you tried full wipe + sd card wipe ?
Maybe there is some problem with internal/external storage?
Sent from my awesome Mimmi with official XDA Android app
ImInMunichBitch said:
Hey
Have you tried full wipe + sd card wipe ?
Maybe there is some problem with internal/external storage?
Sent from my awesome Mimmi with official XDA Android app
Click to expand...
Click to collapse
dude is there any sd card wipe option in cwm or xrecovery ? cant find it !
Nope there isn't one.
U have to wipe it with your pc
Like every ohter external memory.
Hope you get it workin'
Sent from my awesome Mimmi with official XDA Android app
apion said:
dude is there any sd card wipe option in cwm or xrecovery ? cant find it !
Click to expand...
Click to collapse
go to mounts and storage -> format /sdcard
axpira said:
go to mounts and storage -> format /sdcard
Click to expand...
Click to collapse
Ok learned something new
Didn't know that.
Sent from my awesome Mimmi with official XDA Android app
ImInMunichBitch said:
Nope there isn't one.
U have to wipe it with your pc
Like every ohter external memory.
Hope you get it workin'
Sent from my awesome Mimmi with official XDA Android app
Click to expand...
Click to collapse
axpira said:
go to mounts and storage -> format /sdcard
Click to expand...
Click to collapse
i formated the sd and the sd-ext and the cache using the mount menu
it worked ppl
thx alot im gonna change the title

[Q] Xperia S Phone Memory = 0.00B?

I have rooted my XS, and tried various roms, but all come up with the same issue, no phone memory. there are no extra apps on there, and the internal storage is pretty much empty, so i cant figure why this is.
even flashing pre-rooted stock versions give the same result.
help pleeease
thanks
Format the sd card.
Sent from my LT26i using Tapatalk 2
through the recovery?
man if its that simple will i feel stupid
thanks!
In the settings:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Sent from my LT26i using Tapatalk 2
Clear internal storage? unfortunately that does nothing to phone memory
EDIT: ok sorry stratch that, after repeating both several times i have phone storage again! Thanks!
ishamm said:
Clear internal storage? unfortunately that does nothing to phone memory
Click to expand...
Click to collapse
I think it's the same memory with 2 partitions,all you have to do is trying or maybe a factory reset?
You have this problem even without rooting the phone?maybe try another firmware?
Edit: good
Sent from my LT26i using Tapatalk 2
i dont know if its related to the memory issue, but trying to install the DoomKernel wifi modules works fine in the recovery, but causes instant crash and reboot when wifi is turned on
ishamm said:
i dont know if its related to the memory issue, but trying to install the DoomKernel wifi modules works fine in the recovery, but causes instant crash and reboot when wifi is turned on
Click to expand...
Click to collapse
Which kernel do you have cause doom kernels install the wifi modules with the zip package so no need to install it separately.
Sent from my LT26i using Tapatalk 2
DooMKernel [Rel:v04a]
without the modules zip i get Error, with it i get reboot.
ishamm said:
DooMKernel [Rel:v04a]
without the modules zip i get Error, with it i get reboot.
Click to expand...
Click to collapse
That's impossible cause the package includes the right wifi modules.
Which firmware do you have or maybe a custom rom??'
Sent from my LT26i using Tapatalk 2
KA06 SSPeed ROM, if this is known to have issues i will change to any you can recommend, this was just the one i downloaded to test rooting/bootloader unlock, im not wedded to it particularly
ishamm said:
KA06 SSPeed ROM, if this is known to have issues i will change to any you can recommend, this was just the one i downloaded to test rooting/bootloader unlock, im not wedded to it particularly
Click to expand...
Click to collapse
Maybe a bug in this rom not sure,did you follow the instructions in the relevant thread.
I didn't tried any custom rom till now so I'm on stock rom.
Sent from my LT26i using Tapatalk 2
The same problem!
ishamm said:
I have rooted my XS, and tried various roms, but all come up with the same issue, no phone memory. there are no extra apps on there, and the internal storage is pretty much empty, so i cant figure why this is.
even flashing pre-rooted stock versions give the same result.
help pleeease
thanks
Click to expand...
Click to collapse
Hi, i have the same problem, i just unlock my bootloader and install the doomlord kernel, after that, aways my phone reboot i need to set the language like the first time i turn on my phone, and the phone memory appers "total space 0.00b" too... need help :/
thanks for talk about the same problem i have!
Wrong forum to ask question about Xperia S mister !
:::[ Pandemic ..:: JB MoonBreakers 4 Ever :.
Sent From My Xperia P !! Which Old Dinky Toy Device Else !!

[GENERAL][JB]Unofficial CyanogenMod 10 'Jellaxy' Discussion Thread

For more information about the ROM, check out the original
development thread
CyanogenMod 10 'Jellaxy'
General Discussion Thread
* This thread can be used to answer or ask any questions that you may have *
* This thread is for discussion of CM10 development by the 'Jellaxy' team *
* This thread is to prevent spam in the original development thread *
For latest gapps, click here
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Hey good idea! I have a question: i installed this rom and my rom don't boot. Where I am wrong ? Procedure of installation
First goto CWM recovery
Wipe data
Wipe cache
Then chose zip from SD
Install zip
Wipe data again
Wipe cache again
Then chose reboot system now
And still not boot
cydef said:
Hey good idea! I have a question: i installed this rom and my rom don't boot. Where I am wrong ? Procedure of installation
First goto CWM recovery
Wipe data
Wipe cache
Then chose zip from SD
Install zip
Wipe data again
Wipe cache again
Then chose reboot system now
And still not boot
Click to expand...
Click to collapse
Try partitioning your SD card.
Kattra said:
Try partitioning your SD card.[/Q]
Any link to tutorial ?
Thanks for this quick reply
Click to expand...
Click to collapse
Kattra said:
Try partitioning your SD card.[/Q]
Any link to tutorial ?
Thanks for this quick reply
Click to expand...
Click to collapse
Go to CWM > advanced > partition SD card and select ext & swap sizes (I did 1024M & 0M), but you can chose what you want (also make sure to wipe Dalvik cache).
I tried what you saing but still i see only logo, so bad (
Tommy.35 said:
I tried what you saing but still i see only logo, so bad (
Click to expand...
Click to collapse
Hmm, not quite sure what is the problem here. Did you do full wipe? Also what version of CWM you have?
Kattra said:
Hmm, not quite sure what is the problem here. Did you do full wipe? Also what version of CWM you have?
Click to expand...
Click to collapse
Yea, i does Full wipe, of everything, also battery xD) But, too in CM9 i have this problem now. I have CWM 5.0.2.6
EDIT: OK, NOW I STARTED CM9, WHUAA!
Hello! I have one question: Does deep sleep perform properly? Also thank you for bringing this project to our Ace!
easy way to install Tommy.35
partition your sd card using minitool partition wizard and create ext4 partition
wipe everything
install
wipe again
reboot
it works
pulbereluca said:
Hello! I have one question: Does deep sleep perform properly? Also thank you for bringing this project to our Ace!
Click to expand...
Click to collapse
So far deep sleep works fine for me.
@Tommy.35
Try to follow instructions in the post above me.
Google now, voice search and gapps
https://hotfile.com/dl/169621182/0a80b83/gapps-jb-20120815-KonstaKANG.zip.html
installing gapps doesnt install google now....is this a bug or am i doing something wrong?
google now did installed
dont mount system
limxyz said:
google now did installed
dont mount system
Click to expand...
Click to collapse
I've flashed the file you provided and I can confirm that Google Now didn't install for me either.
not mounting system causes setup wizard to force close on boot...
I flashed this rom is really smoth, script as2sd works, i have problem with freezing camera..( good settings btw), and miss google now and some other gapps. Keep the good work devs:thumbup:
Sent from my GT-S5830 using xda app-developers app
After flashing gapps, i have google now. I think u all only think u dont have it, google now is only google blue icon in apps section.
yoker86 said:
After flashing gapps, i have google now. I think u all only think u dont have it, google now is only google blue icon in apps section.
Click to expand...
Click to collapse
which gapps did you flash the one provided above or the 83MB one from goo.im/gapps??
Partitioning SD card deletes data right? :\

[SCRIPT] Swap External SDCard with Internal Storage (CM9 based)

i wrote this script, cause i try this script but it's seems only works for stock ROM only...
so, how about CM9 based users? don't worry... you can use this script to swapping your real SDcard to Internal storage ^^
INSTRUCTIONS :
Flash this zip into CWM, fix permission and wipe dalvik cache... and enjoy the real SDCard
DOWNLOAD :
attached ^^
If you appreciated to my work, please hit Thanks button or donating to me
thanks for this.. but im not likely still be using it, i have a low class sdcard at the moment
How to revert this? thanks!
ccortina said:
How to revert this? thanks!
Click to expand...
Click to collapse
well… i forgot to make some script to reverting it...
for now, you're only can edit it manually
Sent from my MT27i using xda premium
not work fxp 206
This does not work on FXP 205 :crying:
OK, will fix it soon ^^
R: [SCRIPT] Swap External SDCard with Internal Storage (CM9 based)
Hi hitachilinux i see that script now =] and i have some questions:
1 it can work with FXP209, and vengeance kernel?
2 I have samsung SD 16Gb class 10 what happens with this script? Format SD?
3 this script copy automatically /sdcard/android folder to ext?
4 When i connect phone to PC with msc what happen?
5 with root explorer the real SD remains the same? (/external_SD/)
Sorry for my english and for many questions
Sent from my Xperia Sola using xda app-developers app
mtmattia said:
Hi hitachilinux i see that script now =] and i have some questions:
1 it can work with FXP209, and vengeance kernel?
2 I have samsung SD 16Gb class 10 what happens with this script? Format SD?
3 this script copy automatically /sdpcard/android folder to ext?
4 When i connect phone to PC with msc what happen?
5 with root explorer the real SD remains the same? (/external_SD/)
Sorry for my english and for many questions
Sent from my Xperia Sola using xda app-developers app
Click to expand...
Click to collapse
1. yes you can, it's an universal CM9 script and don't worry about version or your CM9
2. no, it's will not formating your external SDCard! it's only swapping your internal with SDCard
3. automatically.
4. it's will be inverted on explorer... so, your Internal Storage will be read on 16 GB and SDCard will be read on 4 GB
5. no, it moved to /sdcard!
yoroshiku ^^
itachilinux said:
1. yes you can, it's an universal CM9 script and don't worry about version or your CM9
2. no, it's will not formating your external SDCard! it's only swapping your internal with SDCard
3. automatically.
4. it's will be inverted on explorer... so, your Internal Storage will be read on 16 GB and SDCard will be read on 4 GB
5. no, it moved to /sdcard!
yoroshiku ^^
Click to expand...
Click to collapse
excellent!!
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
xD
i'm waiting for the reversible script =P
EDIT ok i'm tryng xD
someone can test my script? i fixed this script...
if it worked, please considering to tell me ^^
hello brother, thanks for your work i'll try and have a test on it
itachilinux said:
someone can test my script? i fixed this script...
if it worked, please considering to tell me ^^
Click to expand...
Click to collapse
Had anyone test this and tried revert script? Please reply.
Sent from my Xperia Sola
no change.
Since we are moving vold.fstab to system/etc can't we just follow these steps below?
1.Make backup of original vold.fstab. Using root explorer or es file explorer make a copy of the vold.fstab in some other place and rename it to something else.
2.copy the modded vold.fstab (modded by itachilinux) to system/etc and set right permissions.
3.reboot phone
will try, on fxp216.
:fingers crossed:
Is this script working?

Categories

Resources