Related
Battery Life on a SmartPhone - The Riddle, The Enigma
Attaining 20+ hours of battery life is not only possible it is totally attainable with most phone configurations. The secret to making this happen is, understanding what are the contributing factors are and knowing what to do first.
This guide will help. After reading this guide, you will be able to understand how to end power eating culprits and answer those same questions we see over and over in the threads...... that is .... solving the passive battery drain and get the 20 hours of battery life we all want and desire.
I have tried to get almost everything I can think of and put it in one place. We have all seen the threads that say, “Please help with my battery issue”, “Does undervolting save you battery life” or “Getting horrible battery life” (and yes I did use the…SEARCH Button…and these are titles directly from the Q & A section).
Post 1: Tips and Tricks
Post 2: Roms/Kernels, OverClocking/Undervolting and Memory Management
Post 3: Apps (for your download pleasure)
I will be using satirical stories and anecdotes to get my point across below. Not meant to offend or point fingers at anyone. I am just using real life references to get to the point. Also I am not much for fancy colors. I tried it at the top here but not so much further down. If there is something specific I want to call attention too, I will BOLD it and maybe RED it too.
This is not a GUIDE to get better battery life but rather a GUIDEline to get it. What is the difference, you say? A Guide is a step by step process that you must/should follow to get the outcome that the person who created it wanted you to get [A+B+C+D should = E]. A Guideline is more of a recommendation that allows some choice or flexibility in the understanding, execution or use [A +B-(C+D) can = E].
As we all know, all Vibrants are not created equal and so if something works for one person and not the other, then is it a software, hardware or human error. Chances are it is a combination of all three. Hopefully this can slim those down a bit and answer some questions that you might have or have seen.
**Special thanks to NOOB_IN_N33D for his help in gathering info, especially the MIUI/CM7 parts below. Do yourself a favor and hit up his Guide- Easily Flash MIUI for Vibrant. It has themes, modems, kernels,… and he really put a lot of time and effort into it. It is stickied in the QA section so it shouldn’t be too hard to find. Hit his thanks button please.**
TopShelf10 has this to say about getting the most out of your battery life
the problem is, people want to believe that they can save battery without changing their usage habits. this simply is not possible. no rom or kernel will realistically do this for you. if you remove 1 brick from a bag full of 15 bricks, the bag will be lighter, but still very heavy. you need to download "spare parts" or "process monitor" from the market and start analyzing the way your apps are acting. also look into data syncs that are happening in the background. apps that stay open behind your back/what they are doing 9an app called "autostarts" can prevent apps from self-running under certain scenarios). animation speed. polling for notifications. gps. wifi scans. overclocking. cpu/ram usage. proper sleep. widgets. brightness. 2g/3g. data usage. call time. text volume. - THESE are the things that really affect your battery life.
bottom line is, if you truly want to save battery you are going to have to get your hands dirty...there simply isnt a one-click (or one-flash) solution.
Click to expand...
Click to collapse
Below is a list of fundamental things that can be done without rooting or custom ROM/Kernels. (Standard disclaimer applies: You use it, you set it and you are responsible)
1. Be Realistic -
Do you really think that you can get two whole days out of your battery? If you do, then you must have a very important pile of papers it is sitting on to not even pick up your phone for that long. These are phones. These are mini-computers. These are arcade games. And they want, dare I say, need to be played with, talked on or downloaded to. USE YOUR PHONE.
2. Syncing –
I know you are very important and you need to know what LeBron is doing right now, just in case you get a cup for a coffee and he might be in Starbucks at the same time and you get your picture taken with him and upload it to Facebook, Twitter or Google+. That is fine and I applaud you for it and will probably download the picture and Photoshop myself in your place. This is not the problem. Syncing your accounts is. That is what is causing battery drain. Do you really need to have your FB widget (see widgets section) streaming all day long? Does Kim K.’s endorsement of a potato chip really affect your everyday life? I doubt it. Kill them (not LeBron or Kim K. but rather the auto-syncing). Every time you “friend” someone their numbers, contact info gets sync’d to your phone. Also, there are settings in Facebook, Twitter and Google+ that you can upload pictures instantly. Don’t do that. Once you do, it is out in the Ether-World and just swallowed a bunch of battery doing it too.
Settings>Accounts and Sync>Auto-sync>uncheck it
3. Widgets –
They look cool. But widgets are nothing more than RAM and battery hungry monsters that you purposely put in your home screen. Think about it. What does a widget really do? All it really does is monitor an app that you have running. So not only is it running and taking up battery and RAM but the app that it is linked to is running in the background al’ a Facebook, Twitter, Google+, CNBC, MSNBC, BBC,… the list goes on and on because they want us to put THEM on our home page. What a great marketing campaign the widget is. “Hey look at me new home screen” “Cool. Hey what widget is that?” “Oh, it is X” “Nice, I’ll have to download that tonight when I get home” and then and there they have you and your battery.
4. Apps –
You have to pay attention to your apps. I repeat. You have to pay attention to your apps. Especially if they run in the background. This can be anything from a harmless .99c game to a monster like Live Wallpaper. The battery drain threat is twofold here because the app is running in the background but it could also be using its anonymous data collection abilities and sending that back to the Mothership. Ever wonder why you have a H with up and down arrows in your status bar when your phone is just sitting there? This is because some app is transmitting data, whether you are using it or not. There are apps in the market that monitor these situations like Watchdog or kill the data link when the lock screen is enabled like Juice Defender (see Apps below) or you can adjust app permissions like LBE Privacy Guard. Data transfer is #2 on the What Kills My Battery list.
5. Display/ Wifi/ Airplane Mode/ Animations –
Display:
#1 when it comes to what is eating your battery. Always has been and always will be. Accept it and try to do something about it. This part is easy. Just lower the brightness. You can use Auto or set it as a brightness that is low but you are still able to see well enough to function. Live Wallpapers fall into this category. They are cool to look at but static ones take up less RAM and also less display because they are not running all the time in the background. These screens are bright at 100%, so tone it down. (see Apps below).
WIFI:
Another helpful tip is setting your WIFI sleep policy to Never. This can be done by going here Setting>Wireless>WIFI> Menu key>Advanced>WIFI Sleep Policy and set it to Never.
Airplane Mode Toggle:
NOOB_IN_N33D found this helpful trick too. Phazeman...
"Toggle the airplane mode on/off 3 times in a row, that will reduce your Cell Standby battery usage.
It should only be necessary to do it once after flashing but if you think Cell Standby uses too much power at some stage you could toggle again the airplane mode"…Phazeman
Animations: Set Settings > Display > Animations to "Off or Med. animations.
These are 5 fundamental things that you can do to help reduce battery drain and get some more life out of your phone. Anyone can do these. All you have to do is watch your phone and use some common sense. “Why does my battery drain after only 6 hours? All I was doing was checking Facebook.” Do you really need to be on Facebook for that long of a time? I doubt it. How many services do you have running? How many tasks do you have running? (Android does a good job of shutting down tasks on its own, but if you are using a task killer, it takes more juice to start up an app than to turn it back on, so to say.) Think of it like an airplane. Takes more fuel to get up in the clouds, but once you are up there, it is pretty much coasting along with way less burn.
Special thanks to Oka1, NOOB_IN N33D and chamonix
****************************************************THE PETITION ** We need your support!!!
Click the above link to find out more
Hit the thanks button
ROMs/Kernels, Overclocking/Undervolting and Memory Management
ROMs are key things to think about when it comes to battery life. They can be fully established and working fine, can be RCs and still in development or they can be Alpha/Betas and completely experimental or just beginning. Choosing the best ROM or Kernel is going to depend on what YOU want out of your phone. Do you want a stable 2.2 ROM that has great battery life but not the customizability as MIUI or CM7? Do you want a Gingerbread AOSP ROM that has memory leak issues? There is the rub because CM7 and MIUI have fantastic customization possibilities Gingerbread is well Gingerbread but it has its own issues, and 2.2’s are about as basic as they come. However 2.2’s, because they are so old and overworked, have been Optimized to their fullest and some outstanding tweaks have really brought them to the forefront in daily drivers. Again, the choice is up to you.
Kernels go hand-in-hand with your ROM. Does the kernel support Overclocking or Undervolting. How much RAM and what tweaks are included in the kernel? Does THIS kernel work with THAT ROM? These are all spelled out for you in the OP of each kernel (and ROM) for you to find out. Read them because if you don’t, you’ll bork your phone and then your next post will be, “Help. I Bricked my phone”.
Froyo Kernels (see here) and read their OPs. Many can be Overclocked and some can be Undervolted
Battery Friendly Kernels for MIUI/CM7:
Glitch and Bali-CM (there are others but NOOB_IN_N33D gave me these to put in here). Read their OPs to find out more of what they do.
Overclocking/Undervolting –
If you don’t already know what Overclocking is, well it is pretty much self-explanatory. You can Overclock your CPU above the clock-speed that Samsung, T-Mobile governed it at. This can be done with apps like Tegrak’s Overclock (for stock kernels), SetCPU (here and here), CPUtuner,…Generally have to be ROOTed to do these but if you are flashing ROMs and Kernels then you probably already are. UnderVolting is basically what it sounds like too. You are Undervolting your CPU to conserve battery.
This can be one of the best ways for a more advanced user to save battery. Overclocking is great to see those really cool Quadrant scores. Wow!!! But it also ramps up the battery drain, as well as temperature which can shorten your battery’s TOTAL life. If you want to Overclock to 1.2-1.7 just to see what you score on Quadrant or SmartBench, then do it for that time. Most ROMs/Kernels run stable and smooth at or about 1.0-1.2 with minimal effects on battery (as long as you do tweaks in above post). If you decide to Undervolt you can use Pimp My CPU or Voltage Control to do this but take care to step it down slowly until you find the right settings for you or you will see random reboots or phone freezes and those suck trying to diagnose.
***Please note that whether you Overclock or Undervolt, do NOT “Set on Boot” until you know that they are going to work. Otherwise if it doesn’t work and your phone randomly reboots, you will get into a boot cycle (not a bootloop) because you put them in “Set on Boot”. You must test before you should do this.***
Glitch (Kernel for MIUI/CM7) –very brief overview-See its OP for more
- Up to 1.7GHz CPU OC with added bus/GPU OC (Thanks to morfic for the great base of work)
- Undervolting using Pimp my CPU or Voltage Control
Bali_CM (Kernel for MIUI/CM7) –very brief overview-See its OP for more
- OC/UV up to 1.4GHz (Safe boot to 1GHz) [require SetCPU from market]
- Multiple CPU governor, smartass included (default: ondemand)
- Multiple IO scheduler (default: BFQ)
- CIFS support
- Support SetCPU screen off 100/400 profile
NOOB_IN_N33D is running MIUI and is having great battery life for a 2.3.x ROM. He has given me his settings for Overclocking and Undervolting to put in this guide.
**Please note that these are HIS settings for HIS set-up. They may not work for you but it is a good idea to see what I am talking about when it comes to OC/UV**
N00B_IN_N33D's OC/UV
N00B_IN_N33D said:
These are my SetCPU settings for my phone running MIUI + Glitch (High Leakage)...
Main:
Max: 1000 Max: 1200
Min: 100 OR Min: 100
Scaling: smartassV2 or conservative Scaling: smartassV2 or conservative
Profiles:
Screen Off Max: 400 Charging Max: 800
Min: 100 Min: 100
Scaling: lazy Scaling: Conservative
Voltage:
1500 MHz -25 mV
1440 MHz -75 mV
1400 MHz - 75 mV
1200 MHz - 75 mV
1000 MHz - 125 mV
800 MHz - 150 mV
400 MHz - 175 mV
200 MHz - 225 mV
100 MHz - 250 mV
Click to expand...
Click to collapse
KaintFM's OC/UV
KaintFM said:
Rom MIUI-NB
Kernel Glitch v12 ML
Modem KB5
Main:
Max: 1400
Min: 100
Scaling: Performance
Profiles:
Screen Off Max: 200
Min: 100
Scaling: On-Demand
Voltage:
1400mhz - 75uv
1300mhz - 75uv
1200mhz - 75uv
1000mhz - 100uv
800mhz - 125uv
400mhz - 150uv
200mhz - 250uv
100mhz - 475uv (can't believe it's stable, but it is-his words, not mine)
Click to expand...
Click to collapse
Memory Management
Did you know that you can also free up some internal memory space by just basic maintenance? You can install a Cache Cleaner from the market. I use Cache Cleaner NG (root) and CacheMate (root) which will clear your cache for you, Cache Cleaner NG will even clear your cache on your SDcard. Open Root Explorer and if you see a bunch of free floating cache files, those need to go. Wasted space. Small in the scheme of your SDcard, but still wasted.
So here we go (best part is at the bottom though):
Ok so you go into XDA on your phone, go to the themes page and look at what and how people are theming their phones or see some pix of someone's SetCPU profiles. All those develop a cache that takes up space on your phone. Now lets say that you go to the market and look through some apps or update your apps (more on this later). This also generates cache, usually up to 2-4mb. Ever try to download something from the market and it says something like "not enough space". This not needed cache may be some of the reason.
Here are some tricks and apps that some of you may know and also some tricks that I have found that I am sure most don't know about.
SOME GOOD LOW MEMORY APPS:
Cache Cleaner NG and Cache Mate (both root and free-Cache Mate has a paid but the free one works just fine.)
Diskusage (free) ~ This one will show you a graphical version of your /data/apps and also you SD card to show you exactly what is taking up so much space. You can click on that item and hit "Show" and it will take you to the app's page in Manager Applications. It also has a root function too that will allow you to see what is in /system, /cache, /data,…
Some sort of file manager to get to some things I'll mention below. (I use Root Explorer)
SOME MEMORY CLEARING TIPS AND TRICKS:
Home Launcher ~ If you have a 3rd party home launcher, see if it has the ability to long-press an icon to take you to its screen in the Manage Apps section. I use ADWex and if you long-press on say Market, it takes me to the same place as is I were to go to Settings->Applications->Manage Apps->Market. Instead of all that, just long-press on the icon and BAM! it takes you there. Here you can clear out your cache for the market or delete the data (if you need to do that). Or clear the cache of the XDA app b/c you looked at too many pix.
Browsers ~ These develop cache that takes up memory and space, especially the stock browser. If you use a 3rd party, you can get the settings to clear cache, cookies, passwords,…on exit. I use Dolphin, but I am pretty sure that most have something like this on them. (side note: most 3rd party browsers once exited will not run in the background unlike the stock one)
Media ~ So you download a bunch of mp3's from the net or click on some pix and save it to your SD card. Or maybe you just felt like wiping your card and having a fresh start. Every time you reboot, you phone will scan media. No big deal, but the more you criss-cross things from PC to phone and back again, it can create a bunch of double files in your media cache on the phone. With the proper placement of .nomedia files (this prevents your media scanner from doing just that, scanning media- i.e. pix, jpegs,…Don’t place a .nomedia in your music, album art or DCIM files**bad).
Every once in a while, I'll hit the Diskusage or go to Manage apps and clear the media cache. Then I got to my file manager and the DCIM->Thumbs and delete the .Thumbnails files (should be 2). Unmount the SD card and remount to start the media scan, pull up the Gallery and wait for the thumbs to come back (depending on how many you have, this could take awhile). By doing this you can get almost 5 mb back if you have a bunch of double scans in your media folder.
AND NOW FOR SOME TIPS THAT MOST COULD NOT KNOW:
LOSTDIR - Lets say that you have your phone plugged into your PC and for some reason you, in a fit of rage, jerk the plug out without unmounting it first. This creates a file that is put into your LOST DIR folder on your SD card. Anytime you don't safely unmount the SD card, it will create a file in that folder. In the scheme of the SD card, it isn't too much, but I don't like having useless items free floating about.
TOMBSTONES - So you are downloading an update from the market and for some reason your phone freezes and the Force Close-Retry-Wait doesn't work out for you. You have to do a battery pull. Frustrating I know and the memory takes a hit too. Every time you have to do a battery pull because of a freeze up or something of the like, it creates a TOMBSTONE file in /data. These are useless and can be deleted. If you are flashing ROMs and are constantly having to do battery pulls b/c market crashes or an app freezes, then you are creating a Tombstone file.
**Here is where your file manager (with root) will help. Go into /data and scroll all the way to the bottom and open /tombstone. There should be some files in there and depending on how many there are, I could be a nice chunk of wasted memory. Just select all and delete. They are not needed. Your internal memory should go up by doing this.
LOST & FOUND - Same scenario, but now go into /data/ cache or /cache and you'll see Dalvik-Cache (don’t mess with this), Lost & Found and Recovery. If you tried to download an app and it got frozen for some reason and had to do a battery pull, the apk will be free floating in there, uninstalled (free floating radical). You can delete this. While it isn't in the Dalvik-Cache folder, it is taking up space. Once you are able to download something completely and correctly from the market, it will populate into Dalvik-Cache correctly and won't be a free radical, as I like to say.
Change Log:
1/23/12 - Added more MIUI OC/UV settings; memory management tips, tricks, apps.
Hit this thanks button too
Useful Apps to prolong battery life
These are some apps that will help you get the most of your battery life. I will put a brief descpition of them and you can also click on their names to take you directly to their market link. Note that some of these are ROOT apps and almost all of them also have PAID versions that greatly expand their functionality. Use the free ones and see how you like them and then kick in for the PAID ones if you want. The only one that I really suggest paying for right out of the gate to get the most out of your battery is Juice Defender Plus.
Batstat Widget –
I know, I know. Above I said that widgets were nothing more that monitoring apps on your home page, but this one works great, has low memory and is very, very simple. It shows Charge in %, Volts to know when you are FULLY charged and Temperature F/C to tell you that your phone is getting hot and exactly how hot it is.
BetterBatteryStats –
This app will show you what exactly is eating at your battery. Processes, Running Services, Wakelocks, Partial Wakelocks. It is a PAID app but for XDA users it is free. See here for more extensive details, instructions, screenies, change-logs,... and credits go to Chamonix and his development team for this app.
Batter Calibrator –
When you flash a new ROM, it is always best to wipe the old battery stats associated with that ROM, so you can start fresh as a daisy. How this works is you plug you phone in and charge to 100%, do not mess with it or surf the net (I do this overnight). While still plugged in, hit the apps, grant SU permission and hit the Calibrate Battery button. Grant SU permission again and once done, unplug your phone. Your Batterystats.bin has been deleted. You running your phone down by just using it normally. Most say to run it until it shuts off, but I have had bad experiences doing this, so I let it get to 10-15% and plug it in then. Charge fully up to 100% (again no surfing or games) and you will notice a dramatic increase in battery life.
**Note that this can be done two other ways. You can boot into CWR or Custom Recovery and go to Advanced Settings and there will be the Wipe Batterystats.bin option. Or you can do it manually by going into /data/system/ and deleting the batterystats.bin in there. Any of the three methods work to get the entirely same result in the end. I just like using the app or manually myself. **
Why battery calibration is important and what it is doing.
The app and what it does is more for when you are flashing a ROM and have around 60% and then once booted up fully, you charge it up to 100%. Decided you don't like your ROM and go back to your original ROM via backup, it will show 60% instead of the 100 or 90% you had before you went back to back up b/c you backed up the batstat bin when you nandroided your original ROM.
How about this for an example:
ROM: Deranged9 70% (and you made a backup) Then went to Zendroid, charged and hit calibrate battery at 100%. Used Zendroid for a few hours and decided it wasn't your bag. Your battery is at 50%. You flash back to your Deranged ROM and you know for a fact you had 50% before you flashed back, but now once totally booted, you are showing 70%. This is why you use the battery calibrator after you flash a ROM. Gotta create a new batstat bin for you "fresh" ROM (even though it is a backup).
Recently there has been information debunking this process. I will post it below, however I know what it says, but I also know what I've seen/experienced too. Here is the post by Dianne Hackborn, a Google Dev on her G+ account.
Dianne Hackborn - Jan 12, 2012 - Public
Today's myth debunking:
"The battery indicator in the status/notification bar is a reflection of the batterystats.bin file in the data/system/ directory."
No, it does not.
This file is used to maintain, across reboots, low-level data about the kinds of operations the device and your apps are doing between battery changes. That is, it is solely used to compute the blame for battery usage shown in the "Battery Use" UI in settings.
That is, it has deeply significant things like "app X held a wake lock for 2 minutes" and "the screen was on at 60% brightness for 10 minutes."
It has no impact on the current battery level shown to you.
It has no impact on your battery life.
Deleting it is not going to do anything to make your more device more fantastic and wonderful... well, unless you have some deep hatred for seeing anything shown in the battery usage UI. And anyway, it is reset every time you unplug from power with a relatively full charge (thus why the battery usage UI data resets at that point), so this would be a much easier way to make it go away.
Click to expand...
Click to collapse
JuiceDefender (Plus) [Since I use JD+, that is what I am going to refer too.]
This app’s ability to kill Radio/Data has NO EFFECT on phone calls or messaging. You will still get that call in the middle of the night you were expecting.
If you set it to custom, the go into the settings tab on the right and then all the way at the bottom, there is two buttons to push, The first in Interactive which will pull up Juice Defender for up for any app that isn't already configured and the other is Configure Apps. This is the one that you can customize on an app-to-app basis where if you are no using an app and the screen is locked, it kills the radio/data traffic for that app.
Say you are listening to IHeartRadio, this you would want either Enable or Enable/off (which means the screen will be locked but the radio/data will be working). Now take the browser. If you are not using the browser, then you don't need it transmitting data right? So you would set that one to Enable (which means that it will only enable data traffic when that app is being used).
Juice Defender only works when the screen is locked (WidgetLocker lock screens interfere with JuiceDefender), don't forget and all widgets are battery drains b/c all they really are is a monitoring app and if it is tied to something like Facebook or Google+, then that data will be running constantly.
Settings:
Enable = Radio/data on when app is in use (front)
Enable/off = Radio/data on for background apps (when screen is locked)
Disable = Disables radio/data traffic completely when that app is running
Do Nothing = What is says
Examples:
Angry Birds = Disable (Here is a little known trick that I use for this and any game with Ads. With this and something like Adfree, no more ads in Angry Birds even though the ads are embedded in the .apk)
Pandora/Jango/ Tune-in = Enable/Off (this will keep your battery temp down when streaming)
Browser/ Market = Enable (not enable/off b/c then it will keep your radio/data open)
Beautiful Widgets = Enable/off
mClock/Clockr = Enable/off
SMS/MMS = Enable or Do Nothing (why would you push disable)
I have been using JD+ for over a year on 3 different phones and multiple ROMs and have noticed a considerable difference in battery life. Just takes some time to figure out YOUR settings and what YOU like. I have also used it on Stock kernel and had no problems either.
LBE Privacy Guard
This will go good with JuiceDefender, as they both prevent unwanted data transfer. Protect your privacy by controlling the permission of each application to access your sensitive data. Block malicious operation from Mal-wares and Trojans. Block unwanted network traffic if you don’t have a unlimited data plan. Find out which application is trying to steal your privacy by checking the security log.
RAM Munchers eat battery too. These will fix that for you.
Autostarts (paid-CAUTION this is for advanced users)
Keep control over your phone: See what applications do behind your back.
Shows you what apps run on phone startup, and what other events trigger in the background. Root users can disable unwanted autostarts and speed up their phone boot.
Watchdog
See what is eating your RAM. Hint: if it is using RAM,then probably it is also using battery too.
Spare Parts
Spare Parts allows you to enable some settings
that are not found in the default setting menu
Process Monitor
List the running process on your Android device.
Long click item to kill application or open application.
Fastboot –
This is a handy little app that kills all your services at once and lets them restart back up. I use this right before I hit the lock screen, so that if any app-services are running that I don’t have configured in Juice Defender Plus they will be killed, frees up about 50-70mb of memory, and then I lock the screen and JD takes over. This one is optional if you want it or not. I like it just fine and it works for me.
Matte Screen Filter –
Puts a sort of Dim setting on your screen. Almost like a display overlay, ok? And I did mean to rhyme those. I don’t use it because I have my display set how I want it but you can.
And might as well hit this thanks button too for the Hat Trick
Change Log:
12/22/11 - Per chamonix (BetterBatteryStats dev) took out apk and input his thread to get most updated version, stats, change log [still free for XDA users though]
1/9/12 - Took out actual APKs and put in market links. Click on the name and it will direct you to the market link for the free version that app.
1/23/12 - Added more battery apps and some RAM monitoring/killing apps.
Very helpful post, Thanks.
I was one of the people asking about this and I just wanted to thank you a ton im gonna try some stuff you suggested, mainly my widgets I have about 3 pages haha. Anyways thanks for the guide
Sent from my SGH-T959 using XDA Premium App
Also just wanted to ask a question but first thanks to your no widgets getting I get 20% more life . But to my question, does having alot of apps on a home screen eg.more pages,more apps,etc. Use more battery just like the widgets?
Sent from my SGH-T959 using XDA Premium App
sneakysnake16 said:
Also just wanted to ask a question but first thanks to your no widgets getting I get 20% more life . But to my question, does having alot of apps on a home screen eg.more pages,more apps,etc. Use more battery just like the widgets?
Sent from my SGH-T959 using XDA Premium App
Click to expand...
Click to collapse
I don't think having more apps on your home screen uses more battery, but having more page does use more RAM. I use only 3 pages but I have 4 or 5 folders set up too. Games for instance has 12 games in it. Social has 3 (you know what they are).
Glad to see it is working for you. Use the apps too and if you decide to get JD+ let me know and I will help you set it up correctly.
Guide looks awesome bro!
Update: Also, thanks for including a link to my guide! Really appreciate that!
Sent from my SGH-T959 (Samsung Vibrant)
I think im gonna get it cause so far about 7 hours so so far its a 1 hour increase in life. And ok good to know as of now i only have 1 page but normally i have 3.
Sent from my SGH-T959 using XDA Premium App
Bigger Battery:
For anyone interested here's a thread on buying a larger 1800mAh battery (400mAh more then the stock batteries) that are cheap and fit nicely. Check out this thread here.
Can you imagine... The extended juice of an Epic 4G battery + Woodrube's epic guideline!? ...That would be two epic's combined to =
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I got juice defender ultimate would that help? And how do i use it if you wouldnt mind telling me. I have it set to basic
Sent from my SGH-T959 using XDA Premium App
Ill type you up something and PM you tonight or tomorrow. If you could PM me a general list of your apps, that would help.
I'm like a crack dealer. First answer is free, the second one costs you (a thanks).
Did you know that you can also hit the THANKS button from your XDA Premium app? Just tap the post.
Ok ill do that and i didnt know that ill be sure to thank you you helped me alot so far thanks for the tip
Sent from my SGH-T959 using XDA Premium App
Updated some links and a few things in post #2
Awesome, your guide is from now on "stickied"!
N00B_IN_N33D said:
Awesome, your guide is from now on "stickied"!
Click to expand...
Click to collapse
i think you need to tell me your secret haxor ways to get it stickied too.
Lol, there's no "haxor" skills needed to get a guide stickied.
Sent from my SGH-T959 (Samsung Vibrant)
I am going to be updating this sometime this weekend, so if anyone has any suggestions, let me know and I'll take a look at them. I also have found another miui kernel OC/UV set up too that I'll put in there as well.
Woodrube said:
I also have found another miui kernel OC/UV set up too that I'll put in there as well.
Click to expand...
Click to collapse
For which kernel?
Sent from my SGH-T959 (Samsung Vibrant)
It is Glitch also but the OC isn't as high as yours but the UC is fairly different especially in the lower frequencies. I think that I might put in something about memory management too but still undecided about that yet. Are you working on the new BIBLE? Talk about a monster task. Let me know it you need help and want to colabo on it. PM me your thoughts. Always here to help bro.
ps: Digging your new graphics too. You've come quite a long way.
Hi Xda forum,
I sent my Prime for repair after the hdmi port was not working. Right now, I'm am getting lags when swiping between homescreens quickly and i'm in balanced mode.The lag seem to improve when I switch to performance mode but it still exist. And also when clicking on the app drawer there is slight lag as well.
I would like to know if any of you guys are having the same issues as me ?
Please try it out for me, I really want to know if its a defective hardware problem.
Thanks
Regards,
Venz
my prime works great in balanced mode. when I'm not overclocked, I always use the 1.2Ghz balanced mode. no lag at all. everything moves fast as far as swiping thru homescreens, launching apps, loading web browser pages, scrolling thru web browser pages, etc...
try a fresh reboot to see if it clears things up. if sounds like you installed a bad app or widget or something. check the last things you downloaded. then uninstall one by one to see if it clears issue.
Ya,I've tried all types of reset.There always a very small lag when swiping across screens quickly and sometimes when clicking the app drawer.I find the prime pretty smooth hefore the repair.Confused.
Thats not normal.....i dont even see any lag when im on power save.
i run it in balanced and everything is super smooth. i have not been able to make it lag yet. only while using Wifi certain games(Glu) will lag.
other than that Nothing.
I've found the biggest thing that affects homescreen performance is the number of screens and widgets. Are your screens pretty cluttered? What launcher are you using?
Hi Guys,
Thanks for the reply, I really appreciate it.
I don't run Launchers or have numourous number of widgets on my homescreen.Even after a factory reset/Wipe/hard reset, I get slight lag that appears when sliding across homescreens.
I told the asus service staff about this but their reply was "It passed all the required test and there's nothing wrong with your tablet"
Regards,
ven
venkadesh3 said:
Hi Guys,
Thanks for the reply, I really appreciate it.
I don't run Launchers or have numourous number of widgets on my homescreen.Even after a factory reset/Wipe/hard reset, I get slight lag that appears when sliding across homescreens.
I told the asus service staff about this but their reply was "It passed all the required test and there's nothing wrong with your tablet"
Regards,
ven
Click to expand...
Click to collapse
Do you mean you are having lag on HDMI? Because I think everyone misunderstood you here and think that you are having lag while using the touch screen. I don't have an HDMI cable to test your problem out though...
I run my tablet always on the balanced mode. I have never see any lag while swiping. In fact I am using multipic live wallpaper with random effects. Since last one week I am using Go Launcher HD Beta. Give a try with different launcher.
litetaker said:
Do you mean you are having lag on HDMI? Because I think everyone misunderstood you here and think that you are having lag while using the touch screen. I don't have an HDMI cable to test your problem out though...
Click to expand...
Click to collapse
Yes,I'm having lag while using the touchscreen.Not a big one just small stutters.It doesn't really show up when i'm in performance mode.
sly.cooper said:
I run my tablet always on the balanced mode. I have never see any lag while swiping. In fact I am using multipic live wallpaper with random effects. Since last one week I am using Go Launcher HD Beta. Give a try with different launcher.
Click to expand...
Click to collapse
Okay, sure.I will try to see if using an launcher solves the problem.
venkadesh3 said:
Okay, sure.I will try to see if using an launcher solves the problem.
Click to expand...
Click to collapse
you shouldnt have to do that with the prime in my OP anyway. i mean if it fixes it great. but this thing should not have any lag as far touch screen flipping through home screens. i even cluttered my screens up last night after reading your post with pictures, and widgets and live wallpaper to have have as much going on as possible. and didnt see any lag on any cpu setting.
i would try and find a way of getting it replaced.
that would bug the hell out of me........
Live wallpaper? If you a live wallpaper such as the Asus Water ones it will lag a little bit especially when the animation is starting after you wake up your screen.
Sent from my Transformer Prime TF201 using Tapatalk
i didnt use that one. just simply because i do not like it.....but i will use that one to test with when i get to the house.
and he was only talking about flipping through home screens.....not the start up lag. so thats what i was reffering too.
the2rrell said:
you shouldnt have to do that with the prime in my OP anyway. i mean if it fixes it great. but this thing should not have any lag as far touch screen flipping through home screens. i even cluttered my screens up last night after reading your post with pictures, and widgets and live wallpaper to have have as much going on as possible. and didnt see any lag on any cpu setting.
i would try and find a way of getting it replaced.
that would bug the hell out of me........
Click to expand...
Click to collapse
Thanks alot Guys! I have returned my prime back to the service center.Furthermore, I tried out a Prime display set and noticed no lags whatsoever.
The lagging bothers me so much !
Hi Forum, I just got back my prime from Asus. It got it's motherboard replaced again. But i'm still finding lags and stutters ....I don't what is the issue..seems like Asus can't figure it out too.
Do you have any suggestions on what could it be ?
Build Number : 9.4.2.15
Kernel version 2.6.39.4
AnTuTu Benchmark v2.7.1 (In performance mode) : 10610
CPU frequency : 1600 MHz
your score seems right for your device. you have something going on in the background causing lag. try this. go into settings. then developer options. then turn of window and transition animations. then force gpu rendering. that should speed you up. although that's not required as my out the box setup was lag free, that will speed device up. as far as ui n such goes. do you have any oddball Widgets on homescreens or anything? also download a free app called system panel. it will show you what apps are running. this shows alot more than Asus task manager. if you see something running that's active, and you not using it or shouldn't be running, just kill it.
demandarin said:
your score seems right for your device. you have something going on in the background causing lag. try this. go into settings. then developer options. then turn of window and transition animations. then force gpu rendering. that should speed you up. although that's not required as my out the box setup was lag free, that will speed device up. as far as ui n such goes. do you have any oddball Widgets on homescreens or anything? also download a free app called system panel. it will show you what apps are running. this shows alot more than Asus task manager. if you see something running that's active, and you not using it or shouldn't be running, just kill it.
Click to expand...
Click to collapse
Hi Demandarin, thks for the suggestion. I tried it but there isn't any improvements. I just noticed one thing, there isn't any lag when I click on the sides...the homescreen shifts smoothly but whenever I swipe it across the screen, there's a very small stutter during the transition period.
venkadesh3 said:
Hi Demandarin, thks for the suggestion. I tried it but there isn't any improvements. I just noticed one thing, there isn't any lag when I click on the sides...the homescreen shifts smoothly but whenever I swipe it across the screen, there's a very small stutter during the transition period.
Click to expand...
Click to collapse
Hi Demandarin, just one question...I launched system panel lite app, settings > Dev info > Under the CPU section : Processors/Cores : 4
SYSFS CPUs Present : 4
Processor : 3 << Is it suppose to be like this ?
both powersave and balanced modes limit the framerate to 35fps, it is not totally unreasonable that some people are able to see the difference, while the vast majority do not.
venkadesh3 said:
Hi Demandarin, just one question...I launched system panel lite app, settings > Dev info > Under the CPU section : Processors/Cores : 4
SYSFS CPUs Present : 4
Processor : 3 << Is it suppose to be like this ?
Click to expand...
Click to collapse
I don't think its anything to be worried about. maybe just false reporting in the dev. info section.
This thread will be dedicated to improving the user experience of the Sony Xperia S.
It can be either software, hardware or even accessory related. Please keep contributions to this thread simple and 'to the point' to avoid cluttering the pages.
I'll start:
- Sliding your finger over the capacitive buttons instead of pressing on them will give you 100% accuracy.
- Installing the app "Battery" by Macropinch will allow you to have your remaining battery percentage appear in the notification bar.
- Go to Settings -> Network Settings -> Mobile Network -> Network Mode -> (by selecting either WCDMA only OR GSM only modes will reduce battery consumption, as opposed to having the phone decide for you)
- Go SMS Pro (the best SMS app)
- Dolphin HD (the best browser app)
Feel free to add.
I was going to start that thread, but u raced me to it
Anways, great job!!
Others :
- Install quick settings by APS for those who like settings' shortcuts in the status bar
- Don't apply other screen protectors on the device, there's one already installed
- Choose a still wallpaper, live ones eat up battery
- Badass battery monitor is a cool alternative
Edited : Summary for tips and tweaks ..... http://forum.xda-developers.com/showthread.php?t=1577181&page=7
Sent from my LT26i using XDA Premium App
Use wallpaper images that are 1440x1280. Because of wallpaper scrolling android wants a wallpaper double the screen width even if you disable wallpaper scrolling.
Darken the wallpaper or/and use a warm filter. The screen shows the wallpapers to cold when compared to a calibrated display.
Set the wallpaper using quickpic. The stock android gallary will make the wallpaper look blurry.
My favorite browser is Opera Mobile, nice looking and smooth
Some good tips here guys, cheers ;-)
Sent from my Xperia S via a quantum leap
I noticed the list of unnecessary services running in the background is quite long.
I tried uninstalling them but they keep appearing in the Google Play list.
Also killing them doesn't help as they relaunch immediately.
It seems I'll have to unlock and root my phone to remove them
I didn't check how they contribute to cpu load, but I think getting rid of those will only help improve battery life and responsiveness.
Check the screenshots for a snapshot of system processes and background services for the software ver. 73
Use the power saver that comes with the phone to save battery automatically at night (set up Timed Saver) and when battery is about to dry (default 25% battery saver).
Set it to turn off everything during power saving to achieve maximum batt life.
With this on, I only get about 5% power loss in the morning after a full charge the night before.
I think this is a very good feature sony has add to its phones.
Install GO TaskManager, IMO a very well designed task manager app, functionality is great too.
About the screen,
one, don't put on a screen protector, it degrades the quality of the display
it is strong enough to withstand most scratches.
two, backlight is not really necessary during daytime, 50% brightness is very pleasant to view and saves a lot of juice.
---
Now, I really want to replace the Sony bridge for mac with other software to copy musics movies and other files onto my device.
The Bridge is very buggy, and slow as hell.
I've tried a few apps outside that claims to able to connect devices with MTP mode, but no luck with the Xperia S.
Any suggestions?
The solution for all the xperia S users for file transfer from/to phone :
Install wifi file explorer pro (uses wifi for the transfer)
Brilliant utility IMO!!
sevoflurane said:
The solution for all the xperia S users for file transfer from/to phone :
Install wifi file explorer pro (uses wifi for the transfer)
Brilliant utility IMO!!
Click to expand...
Click to collapse
It's great there's wifi file transfer...but at my place I can only connect to wifi one device at a time (University housing), which basically makes all these wireless transfer useless...
I really want to know if there's a better wired file transfer option.
Just right now the Sony Bridge hanged again when I tried to copy my 700 songs into it...
Seriously Sony, can't I just mount the device like I use to do with all my previous Android devices?
R64 said:
Use wallpaper images that are 1440x1280. Because of wallpaper scrolling android wants a wallpaper double the screen width even if you disable wallpaper scrolling.
Darken the wallpaper or/and use a warm filter. The screen shows the wallpapers to cold when compared to a calibrated display.
Set the wallpaper using quickpic. The stock android gallary will make the wallpaper look blurry.
My favorite browser is Opera Mobile, nice looking and smooth
Click to expand...
Click to collapse
wow mate thanks for the "QuickPic" app tip xd i was so angry about wallpapers that they are so blured .... now they are sharp thank u mate ^^
BTW. This should be sticked . useful post
sevoflurane said:
The solution for all the xperia S users for file transfer from/to phone :
Install wifi file explorer pro (uses wifi for the transfer)
Brilliant utility IMO!!
Click to expand...
Click to collapse
Nice, I'm going to have to try this.
MyPhoneExplorer is propably the best app i run in to. Good app to connect the phone an sync calls, sms, contacts etc.
Sent from my LT26i using XDA
pixy132 said:
Use the power saver that comes with the phone to save battery automatically at night (set up Timed Saver) and when battery is about to dry (default 25% battery saver).
Set it to turn off everything during power saving to achieve maximum batt life.
With this on, I only get about 5% power loss in the morning after a full charge the night before.
I think this is a very good feature sony has add to its phones.
Install GO TaskManager, IMO a very well designed task manager app, functionality is great too.
About the screen,
one, don't put on a screen protector, it degrades the quality of the display
it is strong enough to withstand most scratches.
two, backlight is not really necessary during daytime, 50% brightness is very pleasant to view and saves a lot of juice.
---
Now, I really want to replace the Sony bridge for mac with other software to copy musics movies and other files onto my device.
The Bridge is very buggy, and slow as hell.
I've tried a few apps outside that claims to able to connect devices with MTP mode, but no luck with the Xperia S.
Any suggestions?
Click to expand...
Click to collapse
I agree on most of it.
However:
1. Why do you really need extra task manager on this device? Everything is there.
2. The only app on X S which doesn't work properly is email. Because there was an #@&! there at Sony who made the app store 25 emails per account on device. What makes this app totally useless in any situation. Use K9 email which apparently is profi. It's a pity one has to replace native app, because stock X S email app looks great and handles emails great too.
3. Install X-Plore! It's the best file xplorer you can have really.
If you're using the standard music application, go to settings and use "custom equalizer". Tweak it a bit while listening to music from the genre you listen to the most, it'll make a huge difference overall.
If ur phone rooted, add this line to build.prop for faster, smoother transition:
windowsmgr.max_events_per_sec=160
Then reboot, or you can increase vm heap size to 64m.
Gửi từ LT26i của tôi bằng cách sử dụng Tapatalk
sevoflurane said:
The solution for all the xperia S users for file transfer from/to phone :
Install wifi file explorer pro (uses wifi for the transfer)
Brilliant utility IMO!!
Click to expand...
Click to collapse
wifi file explorer is great, but i recomend also try Samba Filesharing by funkyfresh and File Expert (FTP/HTTP server) which i use with FileZilla on PC - superb fast copying, moving etc.
senne-vdb said:
If you're using the standard music application, go to settings and use "custom equalizer". Tweak it a bit while listening to music from the genre you listen to the most, it'll make a huge difference overall.
Click to expand...
Click to collapse
What settings did you set in equalizer?
So far I haven't seen any benefit to running a task manager. Honestly wouldn't bother with it.
georgebest said:
What settings did you set in equalizer?
Click to expand...
Click to collapse
From left to right sliders: 6, 4, 7, 6 and 10, and clear bass +10.
keunhuvac said:
If ur phone rooted, add this line to build.prop for faster, smoother transition:
windowsmgr.max_events_per_sec=160
Then reboot, or you can increase vm heap size to 64m.
Gửi từ LT26i của tôi bằng cách sử dụng Tapatalk
Click to expand...
Click to collapse
Nice, I want to root my Xperia S but I might wait first.
Awesome app
Widgetsoid is an amazing alternative for toggle switching in notification bar, hard to customize though!
Download it from market.
Here is an overall demo on it....
http://jaumard.android.free.fr/widgetsoid/help_widgetsoid.php?lang=en_EN
Just wondering what apps I can use to improve the performance of my YPG1 US version without installing a ROM. I have installed a couple roms before but was a bit frustrated by losing certain functions and one of them actually made it slower.
Device is rooted atm but only rooted apps I think are SetCPU, AdFree, and Superuser.
I use it mainly for video and reading so I would love to be able to change the brightness from the dropdown menu. I also have a problem with XBMC crashing when I use the Navi-X program most of the time or going very very slowly when running Navi-X so would love to be able to use that, I think it has to do with ram usage even though I don't have that many background apps running.
Sportfreunde said:
Just wondering what apps I can use to improve the performance of my YPG1 US version without installing a ROM. I have installed a couple roms before but was a bit frustrated by losing certain functions and one of them actually made it slower.
Device is rooted atm but only rooted apps I think are SetCPU, AdFree, and Superuser.
I use it mainly for video and reading so I would love to be able to change the brightness from the dropdown menu. I also have a problem with XBMC crashing when I use the Navi-X program most of the time or going very very slowly when running Navi-X so would love to be able to use that, I think it has to do with ram usage even though I don't have that many background apps running.
Click to expand...
Click to collapse
Just a heads up, but have you tried REDD? It is literally a modified version of our stock rom, and you don't lose any functions.
Firstly, you can install a custom kernel if you want. It does help with performance (you get a boost in available ram), and will give you more options with setCPU. Now if you don't want to install anything then you can still setup your min frequency to at least 400 mhz, and keep max at 1000mhz on setCPU. This should keep things zippy.
Another thing you can do is change out the launcher. Many people don't realize this, but using a different launcher can vastly increase the performance of pretty much any android device. I recommend using Holo Launcher, since it is light on ram, and gives a pretty decent performance boost. However, many people love ADW Launcher https://play.google.com/store/apps/details?id=org.adw.launcher&hl=en, or Launcher Pro https://play.google.com/store/apps/details?id=com.fede.launcher&hl=en so if you haven't changed out your launcher then try that as well.
Our players have a knack for using too much ram. For some reason, it may say you don't have that many background apps running but you actually do (you just can't see them in the task manager). For me, I found an app called auto memory manager https://play.google.com/store/apps/details?id=com.lim.android.automemman&hl=en. This app is really simple to use. Basically you set a threshold for each category of apps, and once the available ram goes under that threshold it automatically frees up ram. When I was running it on REDD I almost always had 100mb-150mb free. It kept my device very smooth. I still use it on the JB roms. I had mine set like this 40, 70, 100, 120, 140, 160.
Along with auto memory manager, you can also install clean master https://play.google.com/store/apps/details?id=com.cleanmaster.mguard&hl=en, it's pretty much the ccleaner of android. It cleans up junk files that clutter up your device, and you can also set it to free up ram along with auto memory manager. It works awesome.
You say you want to still be able to hange the brightness from the dropdown? There's an app for that lol. Notification Toggle https://play.google.com/store/apps/details?id=de.j4velin.notificationToggle&hl=en, is pretty much like power toggles on other roms. I have to say it doesn't look exactly like that on GB (that's what it looks like on ics+ roms). It looks like this; You can set this up almost anyway you like and add almost any toggles you want
Hope this helps.
I think you should try an app called Greenify that is available on the Play Store. It "hibernates" apps that are not running so those apps won't run in the background and take up valuable ram or drain your precious battery. (You can pick what apps you want to hibernate)
You should try it out
Sent from my YP-G1 using xda app-developers app
Think I'm gonna install that notification toggle along with a kernel. Can anyone recommend which kernel would improve performance the most (ignore battery life).
Sportfreunde said:
Think I'm gonna install that notification toggle along with a kernel. Can anyone recommend which kernel would improve performance the most (ignore battery life).
Click to expand...
Click to collapse
To be honest they are all about the same performance wise. I went with Klin's R3 kernel, because for me Terrasilent was giving me an issue where it would boot into recovery, and wipe all my data.
You do not need to install anything in order to be able to adjust the brightness from the dropdown menu. I only know for sure that this works on the yp-g1( stock rom), and that it does not work on yp-g70. Other models I do not know about.
All you have to do is when you put your finger on the top of the screen as if pulling down the menu, just press and hold until the shade that pops up dissapears, at wich point you can slide your finger left or right to decrease or increase the brightness. Hope this helps.
AEVAREX said:
You do not need to install anything in order to be able to adjust the brightness from the dropdown menu. I only know for sure that this works on the yp-g1( stock rom), and that it does not work on yp-g70. Other models I do not know about.
All you have to do is when you put your finger on the top of the screen as if pulling down the menu, just press and hold until the shade that pops up dissapears, at wich point you can slide your finger left or right to decrease or increase the brightness. Hope this helps.
Click to expand...
Click to collapse
Wow thanks that worked. It doesn't adjust it through the full range I think but that's nice and easy, I couldn't get the toggle thing working.
Think I am gonna put a kernel in though to try and avoid Dolphin or XBMC from crashing so often.
Awesome post
Sent from my YP-GI1 using xda app-developers app
Trying to get my S3 to be as responsive as possible (when I click on something, I want it to launch as fast as possible).
What would be the most responsive approach if battery life is not important?
Thanks!
Probably AD 3.1 with performance governor.
Thanks! I'll certainly try!
I'm currently on cm 5.1 + boeffla zzmove insane. Wonder if there is going to be a noticeable difference.
Been trying to pinpoint some tweaks and/or kernel settings that would prioritize app launch speed at all costs, but haven't been able to so far.
Will try AD/perf and report back
Gabeloooooo said:
Thanks! I'll certainly try!
I'm currently on cm 5.1 + boeffla zzmove insane. Wonder if there is going to be a noticeable difference.
Been trying to pinpoint some tweaks and/or kernel settings that would prioritize app launch speed at all costs, but haven't been able to so far.
Will try AD/perf and report back
Click to expand...
Click to collapse
AD with ArchiKernel is the must, only in my kernel performance turns on all cores and set them to max frequency.
None of the roms will do as you ask after a week or two of installing and uninstalling apps.
The lack of responsiveness is caused by hardware limitations, mainly the 1GB of ram.
Changing your launcher can help slightly as touchwiz caches everything before displaying which causes latency.
Sent from a stolen HTC M9
shivadow said:
None of the roms will do as you ask after a week or two of installing and uninstalling apps.
The lack of responsiveness is caused by hardware limitations, mainly the 1GB of ram.
Changing your launcher can help slightly as touchwiz caches everything before displaying which causes latency.
Sent from a stolen HTC M9
Click to expand...
Click to collapse
That was my understanding, but I was wondering if there was a way to force a behavior that would speed up things. Say I only use 4 apps (phone, mail, calendar, and the game threes). Say I never need to run 2 of these apps at once. I was wondering if there was a way to set an aggressive behavior to make sure that when I launch any of these apps, everything else 'dies' to free up ressources for these.
I found that indeed switching to a non-google now launcher makes a HUGE difference when coming back from apps. Been trying to find the lightest launcher that exists.
Activate developers options and set lmk to aggressive (do not keep apps).
Sent from a stolen HTC M9
shivadow said:
Activate developers options and set lmk to aggressive (do not keep apps).
Sent from a stolen HTC M9
Click to expand...
Click to collapse
Thanks! Will try and report back!
JustArchi said:
Probably AD 3.1 with performance governor.
Click to expand...
Click to collapse
Combination of AD3.1 + dev options to no keep apps + nova launcher + disabling all animations has made a world of difference
But I played around with the GPU values in synapse without writing them down. Is there a list of the default values for the GPU speeds? (the voltages and % all have the default values in the app, but not the GPU speeds)
Thanks!!
Gabeloooooo said:
Combination of AD3.1 + dev options to no keep apps + nova launcher + disabling all animations has made a world of difference
But I played around with the GPU values in synapse without writing them down. Is there a list of the default values for the GPU speeds? (the voltages and % all have the default values in the app, but not the GPU speeds)
Thanks!!
Click to expand...
Click to collapse
Synapse has an option to restore default settings.
JustArchi said:
Synapse has an option to restore default settings.
Click to expand...
Click to collapse
That's the thing, I'm probably super stupid, but I can't for the life of me find the reset defaults option in synapse
Gabeloooooo said:
That's the thing, I'm probably super stupid, but I can't for the life of me find the reset defaults option in synapse
Click to expand...
Click to collapse
You see a box right on the right upper corner(the multi select icon). Tap it and then select the settings you want to revert to default. Then tap at the arrow on the top right
eatsleep said:
You see a box right on the right upper corner(the multi select icon). Tap it and then select the settings you want to revert to default. Then tap at the arrow on the top right
Click to expand...
Click to collapse
A million thanks (and apologies for my being stupid)!!