[Q] Unlock Recently and have links? - Motorola Photon 4G

Anyone here recently unlock their Photon and have updated links? It seems a lot of the links on the Pudding Unlock page are broken. I'm hoping to unlock bootloader, root and get onto CWM w/ CM7.2.

I have the files on my pc at home i could share with drop box. A lot of sharing sites are going down. Government going after people. Which bites because we are not doing anything illegal. It is those who pirate stuff that cause the problems.
Sent from my MB855 using XDA App

Cool. I did find RSDLite 5.6 - does that work instead of RSDLite 5.5?
Also, under this step:
Root:
A moto-fastboot flashable /system image with su already in /system/bin (pre-reooted) This is based of the system in Yay4jugg's thread (NB: you need to be unlocked to flash this .)
Instructions:
0) Make sure your phone is charged.
1) Boot your phone in to fastboot mode, connected to PC.
2) At the prompt/cmdline type moto-fastboot flash system system.img
3) Make sure you have superuser app installed from market.
4) Enjoy!
Click to expand...
Click to collapse
Could I just flash CM 7.2 for this step or is there another flashable system image I could use instead? This and RSD Lite are two of the links that are dead (along with stock recovery.)

jeggen said:
Anyone here recently unlock their Photon and have updated links? It seems a lot of the links on the Pudding Unlock page are broken. I'm hoping to unlock bootloader, root and get onto CWM w/ CM7.2.
Click to expand...
Click to collapse
There is a sticky in the dev section:
!!!LOOK HERE FIRST!!! Motorola Photon Compendium a.k.a. all things MoPho 1/08/12
As the title states, it is a thread for (almost) everything relating to the MoPho. SBF's, RSD lite, unlock files, ROM's and so on. Almost every SBF and all the needed software that is linked in that thread is hosted on my site.

So probably a pretty basic question... On these unlock/root/relock steps...
If I want to unlock bootloader and install CM7 can I just stop with the step of installing CWM and then install CM7.2 for the Photon? (I don't care if I have 4G - no 4G even near me.)

Flashing CWM Recovery will be the last step taken. After which you will have the ability to flash custom ROM's

Related

Brandless Atrix, how to start flashing

Hi,
I ordered an Atrix 4g yesterday on amazon.de and since flashing a custom rom on my previous phone was such and improvement I wanted to do the same with the atrix. But after reading some threads in the dev section I must admit i'm very confused and I have some questions.
- How do I know if my phone is unlocked? if not how to unlock?
- I think it ships with 2.2, update to 2.3.4 or just flash custom rom?
- Can anyone tell me all the steps I need to do to go from stock 2.2 to a custom rom? (CM7 Mod ICS FINAL or Neutrino ROM 1.4-S) (including unlocking, recovery etc) this part is very confusing because a lot of roms have different types of flashing and some are talking about fastboot, does my phone have this?
- How do I know what version of the phone I have? ATT? Tmobile?
- Is there any chance of bricking when doing this? With my previous phone you could ony soft brick.
I'm sorry if these things are already written somewhere but I just couldn't find em.
Thnx for all info you can tell me.
Check the noob guide in the gerenal section, its at the top of the forum,
To figure out your software version just go to settings >about phone
As for bricking you can only hard brick if you use the ota gingerbread update THEN use rsd to downgrade. So if you only use rsd to unlock then you are safe
sent from my Atrix via XDA premium
So I got my atrix a few days ago and have been looking to unlock/flash it since.
I read most posts/guides and I think I know what to do, but I'm still scared of bricking so I wanted to dubble check if I got it right
My atrix:
System: 45.31.0.MB860.Retail.en.DE
Android: 2.3.4
Build number: 4.5.2A-74_OLE-31
What I think I have to do:
1st: Flash SBF file (the IHOP file from the house of pudding) with RSDlite
2nd: Fastboot unlock
3th: Install clockworkmod with Fastboot like in:
ww w.addictivetips.com/mobile/how-to-install-clockworkmod-recovery-on-motorola-atrix-4g/
(remove the space between the WWW, not enough posts to post a link)
4th: Do a backup with clockworkmod
5th: Flash a custom ROM with clockworkmod and clear cache,dalvik cache and data.
Could someone plz comfirm that all this is correct?
Greetings!
That sounds about right
Be sure to follow any specific installation instructions for the Custom ROM you choose. Some prefer you wipe via fastboot, some want you to wipe certain partitions *after* installation, etc.
phnord said:
That sounds about right
Be sure to follow any specific installation instructions for the Custom ROM you choose. Some prefer you wipe via fastboot, some want you to wipe certain partitions *after* installation, etc.
Click to expand...
Click to collapse
ok, i'll be sure to pay attention to that, one more question.
Do I need root for any of this?
M_K_ said:
ok, i'll be sure to pay attention to that, one more question.
Do I need root for any of this?
Click to expand...
Click to collapse
ofcourse you would you can just download the gingerbreak.apk from this site; )
Sent from my MB860 using Tapatalk
OK, this all worked perfect and have been running Neutrino's since. But I wanted to try darkside now, can I just flash this in clockwork? Because I read somewhere when you flash an earlier version you get brick and neutrino's is 2.3.7 and darkside 2.3.5?

[q] a noob's quest to unlock 2.3.4

sorry if i am asking a question asked for too many times already,but i can't seem to find a solution to my case,or either the thread is no longer active since the TS did not update his results,thus making me confused if he hassuccessfully or unsuccessfully rooted his atrix
i'm using atrix mb860 ofw 2.3.4.and i'm trying to install neutrino 2.2 rom gt
so here are what i had done until now:
1.rooted my atrix using Pete's One Click Root : http://forum.xda-developers.com/showthread.php?t=1258599
2.installed titanium backup and backed up batch of everything.superusered.
3.Installed cwm from market and got superusered.
4.flashed cwm recovery for atrix 4g
5.tried to install romracer using cwm.selected to restore previous roms and also chosen both wipes but failed.atrix reboots and shows "failed to boot , starting rsd mood"
what my concern is about,is just "rooting" enables me to already install roms?if it does,what did i do wrong in my steps?if it does not,please show me the way.i do not know if i should or should not flash my sbf files and bootloader
also,i read that to show that my atrix is rooted,it shold show at the top right corner during boot.but i don't see any
please help me because i really don't know what i'm doing here.i'm still new and the guides provided by the developers are for experienced people.it does not provide the detailed steps.also,please do explain some of the terms used like what is the difference between rooted and unlocked devices.
if you are too tired to explain everything all over again,then just give me the required links.i'll learn my way.btw,if you are able to give me a working link,and updated threads that would be very hopeful since some don't re-edit their first post,thus needs us to find the answer in a 1000++ replies
thank you in advance
You need to unlock your bootloader. The text you're referring to in the upper left corner of the Motorla screen is "unlocked" and it only appears after you unlock.
You can do it manually. See here.
Or automatically. See here.
You CANNOT install a CWM without unlocking your bootloader first. Rooting does not let you install ROMS, unlocking the BL does.
thanks for the reply.so that's what i'm missing.is it necessary to flash my sbf?and since neutrino rom gt changes my kernel(i think).
so after unlocking my bl,i can then install romracer->neutrino then?i'll update again and see what happens
graphidz said:
thanks for the reply.so that's what i'm missing.is it necessary to flash my sbf?and since neutrino rom gt changes my kernel(i think).
so after unlocking my bl,i can then install romracer->neutrino then?i'll update again and see what happens
Click to expand...
Click to collapse
Yes, the pudding unlocker is a small 10mb sbf file. After flashing that with RSD, you'll run the fastboot oem unlock commands.
The kernel (boot.img) is completely different from the bootloader. (if I'm reading your ? correctly).
Correct: Unlock BL>install romracer CWM> BACKUP! > install your ROM of choice
okay,this is starting to get on my nerves.i went to pudding,then scrolled down to "RSDLite/Windows Drivers/Sbf_flash"->go to hxxp://goo.gl/vfUXc link->tried but failed as it's for at&t.mine is international then.just great!
went back topudding's thread.read again..."unlock"...YES!solution for international phone!heck,this is an sbf file,what am i going to do with an sbf file?if it's just copy and paste,that will be easy.
ok,so what i really need now is a real solution to an international atrix and not at&t's atrix.or is there actually another thread for just international atrix?i just don't understand at all.please help
http://www.youtube.com/user/TheSmokingAndroid
Ck the earlier videos that he has posted on unlocking the atrix, helped me quite a bit.
FINALLY DID IT!now to install neutrino gt!thanks for all your help guys!.this guide was indispensable:
hxxp://forum.xda-developers.com/showthread.php?t=1302423
a new question : how do i install romracer?the guide did say to install itbut i don't see the app?
nvm,finally able to install neutrino.thanks a lot guys!now where's the close thread button...
no wait,again another problem!i wanna ask at neutrino's thread but this stupid 10 posts rule is preventing me.so i need to ask here.after installing neutrino,my internal memory is left with 2gb only.where is the other 8gb?when i plugged into usb,i did find them.
to note,i used cwm to install neutrino gt.the zip file was in internal.does that have anything to do with it?any way to get it back?do i need to flash neutrino again?if so,please teach me
also,how to get the market back?

[Q] how to unlock boot loader and install roms (2.3.6)

im already rooted (used the old fashion command way)
i also need a good recovery (someone recommend the best one) ( i need to be able to do nan droid backups )
im going for jokers ICS rom ^.^
so please i need walk throughs that work with my version of atrix
system version = 4.5.141.mb860.att.en.us
model= mb860
android version=2.3.6
baseband = n_01.77.37p
webtop (not that i care) =wt-1.2.0-110_oly-6
kernel=2.6.32.9 [email protected] #2
build#=4.5.141
i appreciate the help!
also what is the downside to this? would i not be able to use the official ICS update?
http://forum.xda-developers.com/showthread.php?t=1154600
This is a great thread for new users. I suggest you read it thoroughly. If you have questions ask after you have read up on the process that you are asking about.
Sent from my MB860 using XDA App
Well I did read that ,actually if you look in my signature I already have a backflop running 2.3.4 on cm7. I am looking for what people think is best for the atrix. and the process for the new 2.3.6 update that caused some upset.
*EDIT* I'm sorry I did realize this wasn't posted from my computer
Sent from my Transformer Prime TF201 using Tapatalk
if ur on at&t !!
the best way to unlock is to use the automatic bootloader unlocker !!
http://forum.xda-developers.com/showthread.php?t=1182871&highlight=automatic
for how to do it, here's a youtube video describing the same !!
http://www.youtube.com/watch?v=S6a0BWquqAc
also do some research before doing it !!
and be sure, never flash sbf files or use rsd lite after unlocking the bootloader !!!
i unlocked my bootloader using the automatic unlocker (but i was on 2.3.4[4.5.91]) !!!
Well i need to unlock that to load custom roms right?
Sent from my Transformer Prime TF201 using Tapatalk
It has been a while since I rooted/unlocked the bootloader of my phone, but if I remember correctly, I followed similar steps as these.
Currently, I am using CWMs Touch Recovery, can be downloaded from their site, then flashed to the recovery partition using fastboot, I'm sure you know how to do this if you rooted the phone via command prompt. Do a google search, otherwise and current recovery image will do find for what you need, but read the reviews before flashing, some fail hard.
Once that is all done, you pretty much are all set, CWM Touch allows for backups to be completed, flashes to occure and wipes to happen.
I would also suggest that instead of just sticking with just jokersax, I would also suggest to check out turls, also available from jokers site. I personaly find turls to be a little more stable, and I seem to have minimal issues with turls, but everytime I see an update is available, I still jump to that one just to see what is up, then I may or may not jump back down, only because I can
After using turls and jokers ICS images, I haven't seen any downsides compared to stock, CM7, or any variants of the like, I love me my ICS. As far as official updates go, I wouldn't be too concerned about that, unless if somewhere else documented, I don't think the ATRIX will be seeing any official updates, but if something does show up, there is a script available on this site to resotre back to stock, then updates should work just fine. This tool seems to do the trick, I've used it personaly myself, got me right back to the stock moto install.
Stock ics from moto is official for q3 its on there site ^.^. But i want is sooner. Im just worried the new 2.3.6 update might of changed something
Sent from my MB860 using Tapatalk
You have to flash an SBF File to your phone Via RSDLite your phone will reboot a few times don't be scared
Then go to command prompt and type in command
fastboot oem unlock
Will give you Unique ID
Then type in
fastboot OEM unlock ############ unique ID
Then bam Unlocked bootloader
Make sure you use the correct SBF File for AT&T
And make sure you have A fastboot.exe file in your android sdk
To flash CWM flash it through the app first then flash it to your phone via Command Prompt
On command prompt type
fastboot flash recovery recovery press shift should auto correct make sure it is in the same folder as your Fastboot.exe
CM9 Bell Atrix using XDA App
thank you so much! how hard is it to reverse this? ( the boot loader unlock) say if i need to RMA it to AT&T or something...also what do you guys use as a recovery and or what do you recommend?
Once you unlock your bootloader - you cannot reverse it - its permanent... you can never re-lock it.
so no more OTA updates?
Not easily - it can be done.... Most NEW Roms are built off the OTA's and are better than the stock releases..... OTA's are not really a big deal. Biggest issue with unlocking your bootloader is that it instantly voids any/all warranties.
*sigh* i know but mine is up as far as i know and i am already two years with the phone....so im just waiting for quad cores...
i was able to return my unlocked Atrix to AT&T by flashing the stock 2.3.4 blah.blah.91 sbf. This does not re-lock it but gets rid of the Unlocked msg at boot screen
thank you ! that's what i needed to know!
so can i install a new recovery before i unlock the boot loader? which would you recommend? as i need to do a nandroid >.< , i did all this on my moto backflip...a while ago..and well....it didnt need an unlock..
ianwardell said:
*sigh* i know but mine is up as far as i know and i am already two years with the phone....so im just waiting for quad cores...
Click to expand...
Click to collapse
Atrix 4G has only been out for a year a and a few days..... lol.
They gave me an upgrade ......that's odd
Sent from my Transformer Prime TF201 using Tapatalk
Wrong Version?
I am sure you guys are trying to help out, but most are missing an important fact in his request. I noticed this because I am looking for the same answer for the same version as the OP. 2.3.6
The solutions posted so far all refer to 2.3.4 and do not work with 2.3.6. The one updated thread with a link to a site that claims to work on 2.3.6, does not list the Atrix MB860 with 2.3.6, it does list it with 2.3.4.
This does not work, it gets an dialog box error "failed to chmod file: /data/local/tmp", then another that says "failed to get shell root"
The one thread that users claim it does work with 4.5.141.MB880.ATT.en.US, but that's not an option in the script. And they don't give a clue as to what steps they followed.
EDIT: Took a leap of faith, man that turned my stomach ( this is my wife's phone, I don't want to brick it ). I can confirm that the latest link past page 85 of http://forum.xda-developers.com/showthread.php?t=1182871&highlight=automatic is valid as of 03/01/2012 and it is what I used. Followed the OP instructions and then then followed the prompts in the script. It did unlock, then I rooted and flashed CWM, option two.
Its the same as the 2.3.4 way. I figured it out an now have ics jokers rom
Sent from my MB860 using Tapatalk

How to take Motorola Photon 4g out of the grave?

Recently I ordered Motorola 4g from US.... It was with stock Sprint Sunfire OS.
System Version : 45.4.13.MB855.Sprint.en.Us
Model MB855
Android 2.3.5
Baseband N_01.29.10R
Webtop 1.2.0-180
Kernel [email protected] #2
Build 4.5.1A-1_SUN-254_13
So what I did, I was trying to install custom rom on that. Steps I had taken
Rooted phone via installing SuperUser and various rooting methods like ClickOnce, Photon -Torpedo but no one seems successful , while executing I got errors everytime. But after day or two I came to know about that my phone is rooted. As I was getting SuperUser popups on root operations. Then I installed CWM and tried to install the ROM from there but everytime I got stucked at Yellow Triangular icon (recovery mode).
Repeated step on rooting process and unlocking the bootloader by applying pudding.rar and fastboot commands and every time i got the error and Starting RSD Screens, but anyhow my phone recovers itself to its original boot state afetr pulling out battery and manually restrating.
Finally one day I use some other Recovery Tool , i am unable to recall the name. It installed and rebooted successfully in the recovery mode. I then wipe the dalvik cache, wipe factory reset and then tried to installl the custom rom that MIUI 2.68 i think . I was happy to see some designer screens on my phone and then it said rom installed successfully.
I then reboot my phone and found it in the Failed To Start2 , Starting RSD mode
I tried various way to restore...
Installing pudding.rar using RSD lite but everytime I got sec_exception : sec_exception : b655, eddc,eb
I then tried reinstalling SBF : 1FF-sunfire-user-2.3.4-4.5.1A-1_SUN-198_7-CM-release-keys-signed-Sprint-US.sbf and sunfire-2.3.5-4.5.1A-1_SUN-254_4 but while enumerating phone I got error sec_exception febe 4e 4e
I have also tried nopudding4u.sbf but the same result.
Please,, help me and my phone out .. as its going to be more than a week... i feel handicaaped...
Please guide me through the step by step , which file and when and please do provide the links of the files to download.
**Update OTA with 2.3.5 before murdering.....**
Most of those sticky threads are outdated, without important informations. You need to search in whole dev section, there are the answers, how to recover your bricked Photon.
bring it ON..............please
peetr_ said:
Most of those sticky threads are outdated, without important informations. You need to search in whole dev section, there are the answers, how to recover your bricked Photon.
Click to expand...
Click to collapse
Thanks for your reply peetr_.. I would like to know on the basis of my exceptions , Is my phone recoverable or become as useless as a paperweight. I can see fastboot modes and RSD modes and can even swicth between them. In some other forum , I came to know that ,I can reover my phone back but for that I need a locked bootstrap for 2.3.5 and then reflash using the stock sbf.
So could you please tell me how to do that and where to find those files. I am digging XDA Forums and AndroidForum.com past two weeks for the solution...
amitranjan said:
Recently I ordered Motorola 4g from US.... It was with stock Sprint Sunfire OS.
System Version : 45.4.13.MB855.Sprint.en.Us
Model MB855
Android 2.3.5
Baseband N_01.29.10R
Webtop 1.2.0-180
Kernel [email protected] #2
Build 4.5.1A-1_SUN-254_13
So what I did, I was trying to install custom rom on that. Steps I had taken
Rooted phone via installing SuperUser and various rooting methods like ClickOnce, Photon -Torpedo but no one seems successful , while executing I got errors everytime. But after day or two I came to know about that my phone is rooted. As I was getting SuperUser popups on root operations. Then I installed CWM and tried to install the ROM from there but everytime I got stucked at Yellow Triangular icon (recovery mode).
Repeated step on rooting process and unlocking the bootloader by applying pudding.rar and fastboot commands and every time i got the error and Starting RSD Screens, but anyhow my phone recovers itself to its original boot state afetr pulling out battery and manually restrating.
Finally one day I use some other Recovery Tool , i am unable to recall the name. It installed and rebooted successfully in the recovery mode. I then wipe the dalvik cache, wipe factory reset and then tried to installl the custom rom that MIUI 2.68 i think . I was happy to see some designer screens on my phone and then it said rom installed successfully.
I then reboot my phone and found it in the Failed To Start2 , Starting RSD mode
I tried various way to restore...
Installing pudding.rar using RSD lite but everytime I got sec_exception : sec_exception : b655, eddc,eb
I then tried reinstalling SBF : 1FF-sunfire-user-2.3.4-4.5.1A-1_SUN-198_7-CM-release-keys-signed-Sprint-US.sbf and sunfire-2.3.5-4.5.1A-1_SUN-254_4 but while enumerating phone I got error sec_exception febe 4e 4e
I have also tried nopudding4u.sbf but the same result.
Please,, help me and my phone out .. as its going to be more than a week... i feel handicaaped...
Please guide me through the step by step , which file and when and please do provide the links of the files to download.
**Update OTA with 2.3.5 before murdering.....**
Click to expand...
Click to collapse
Should have read around a bit before you attempted all of this. Go to the general and QA section of the photon forums and search the first few pages of each. There will be 5 or 6 different threads with people who have experienced the same problems in which we have completely outlined the steps you would need to take.
Is this what I have to do ????
Acvice said:
Should have read around a bit before you attempted all of this. Go to the general and QA section of the photon forums and search the first few pages of each. There will be 5 or 6 different threads with people who have experienced the same problems in which we have completely outlined the steps you would need to take.
Click to expand...
Click to collapse
Step by step 2.3.5 unbrick:
1)Flash this SBF (http://d-h.st/XGJ). Now you'll have stock 2.3.5 for Electrify. But you need Sprint services (I assume), so you don't stop here. -
Flashing ,Using RSD Lite
Click to expand...
Click to collapse
2) Download bootstrap from DroidX2 forum, and get it working. Of course you need to root your photon first.
3) Flash this ROM (http://forum.xda-developers.com/showthread.php?p=30332325) from bootstrap. Please follow the instructions for this ROM carefully, you don't wanna flash the SBF again.
From bootstrap means - adb fast boot, am i right????/
Click to expand...
Click to collapse
4) Flash 254_13 modules (http://d-h.st/aAi) with bootstrap. you need them.
5) Flash 2.3.5_254_13 sv2 boot, recovery and cdrom image sbf (http://d-h.st/TeB) with RSD Lite.
6) Flash 254_12 libmoto_ril.so (http://d-h.st/BmX) with bootstrap. You don't need to flash the radio SBF.
4) and 6) is not needed, if you install rom 3)
amitranjan said:
Step by step 2.3.5 unbrick:
1)Flash this SBF (http://d-h.st/XGJ). Now you'll have stock 2.3.5 for Electrify. But you need Sprint services (I assume), so you don't stop here. -
2) Download bootstrap from DroidX2 forum, and get it working. Of course you need to root your photon first.
3) Flash this ROM (http://forum.xda-developers.com/showthread.php?p=30332325) from bootstrap. Please follow the instructions for this ROM carefully, you don't wanna flash the SBF again.
4) Flash 254_13 modules (http://d-h.st/aAi) with bootstrap. you need them.
5) Flash 2.3.5_254_13 sv2 boot, recovery and cdrom image sbf (http://d-h.st/TeB) with RSD Lite.
6) Flash 254_12 libmoto_ril.so (http://d-h.st/BmX) with bootstrap. You don't need to flash the radio SBF.
4) and 6) is not needed, if you install rom 3)
Click to expand...
Click to collapse
Im pretty sure thats right. However, I have never faced this problem first hand so i would wait for a second opinion before going forward. Peetr will know, hopefully he will chime in.
Yes. Exactly those steps.
Bootstrap is bootstrap CWM recovery, you must download the apk and install, following the instructions.
peetr_ said:
Yes. Exactly those steps.
Bootstrap is bootstrap CWM recovery, you must download the apk and install, following the instructions.
Click to expand...
Click to collapse
Thanks for the confirmation of the steps.
Few more things:
1. I have still my bootloader locked i think. So will these these steps work.
2. Flash this SBF (http://d-h.st/XGJ). Now you'll have stock 2.3.5 for Electrify. But you need Sprint services (I assume), so you don't stop here. - What If I dont want Sprint Services? I am here in India and there is no sprint network. We have VodaFone, Airtel and Other operators, still on 3G. No 4G here. Can I stop @ 1.
3. Can I install , other custom roms on it, in future If I want?
No cause you will have a photon radio with electrify modules won't work.
Unable to boot into recovery
peetr_ said:
Yes. Exactly those steps.
Bootstrap is bootstrap CWM recovery, you must download the apk and install, following the instructions.
Click to expand...
Click to collapse
I have installed the SBF correctly and too roooted the phone. Also installed the DroidX Bootstrap by Koushik Dutta. but I am unable to boot into recovery. Can I try ClockWorkMod Recovery... that we generally used to flash roms or strictly bootstrap is necessary. I have tried System recovery by Tenfar but it wont boot into recovery...
Please help
It's recovery for DroidX2. Not DroidX.
And you must be connected to wall charger, to boot into it.
Photon is now Electrified with LIFE ----
Thanks a TON to all the Photon Guys, especially peetr_. :highfive::highfive::highfive::highfive::good::good::good::victory::victory::victory::victory::victory::victory::victory::victory::victory::victory::victory::victory::victory::victory::victory::victory::victory: Now my photon and ELECTRIFIED and has a SPRINTing LIFE....
But still I am curious about the custom rom installation.
1. Is it possible and safe or I have to stick with the stock rom.
2. Wait for motorola / sprint for their another update if they allow us to installl custom roms (well its not possible, I know)
You can try some custom roms for locked bootloader. You can always sbf back.
Can you provide me some links for my phone as i am facing some unusual restarts withis rom...
Sent from my MB855 using xda app-developers app
Also i am facing Sleep Of Death issue after waking up this dead phone from grave....
Earlier it was working fine. Generally i face one or two a day.
Is rom upgradation a solution? I hv experienced whenever it goes to sleep the back panel gets heated up than normal. Also when i use wifi 3g the same thing happens...
Sent from my MB855 using xda app-developers app
amitranjan said:
Step by step 2.3.5 unbrick:
1)Flash this SBF (http://d-h.st/XGJ). Now you'll have stock 2.3.5 for Electrify. But you need Sprint services (I assume), so you don't stop here. -
2) Download bootstrap from DroidX2 forum, and get it working. Of course you need to root your photon first.
3) Flash this ROM (http://forum.xda-developers.com/showthread.php?p=30332325) from bootstrap. Please follow the instructions for this ROM carefully, you don't wanna flash the SBF again.
4) Flash 254_13 modules (http://d-h.st/aAi) with bootstrap. you need them.
5) Flash 2.3.5_254_13 sv2 boot, recovery and cdrom image sbf (http://d-h.st/TeB) with RSD Lite.
6) Flash 254_12 libmoto_ril.so (http://d-h.st/BmX) with bootstrap. You don't need to flash the radio SBF.
4) and 6) is not needed, if you install rom 3)
Click to expand...
Click to collapse
This seems like a lot of work just to get a softbricked Photon 4G to work. Didn't Motorola release a soak test about two months ago? Do we have an SBF for that? If so then couldn't someone with a bricked Photon 4G (running 2.3.5 stock) just flash the soak test files and get the Photon working fine?
Also if someone does follow these instructions, will they be able to get the latest OTAs from Sprint when ICS/JB goes official?
sub2k1 said:
This seems like a lot of work just to get a softbricked Photon 4G to work. Didn't Motorola release a soak test about two months ago? Do we have an SBF for that? If so then couldn't someone with a bricked Photon 4G (running 2.3.5 stock) just flash the soak test files and get the Photon working fine?
Also if someone does follow these instructions, will they be able to get the latest OTAs from Sprint when ICS/JB goes official?
Click to expand...
Click to collapse
This is the only way, there is no sbf for the latest soak. And honestly, this process doesnt take very long. If you cant spare an hour to unbrick a phone then people shouldnt be tinkering with their phone in the first place. And nope, you will remain locked, no way to unlock and install ics/jb.
"Say Apple one more MoPho'n time..."
I'm currently struggling with this process. I flashed the .sbf via rsdlite. It gets to 100% but then it says error because phone failed to re-enumerate. I installed RockoDev's ROM last night and phone was bricked all night while I naively thought it would load. Was stuck at the NOW screen when I went to bed and hadn't changed when I woke up.
Acvice said:
And nope, you will remain locked, no way to unlock and install ics/jb.
Click to expand...
Click to collapse
I believe you misunderstood my final question but that is okay.
InsanePostman: Are you also known as huntingoctopus on other sites?
sub2k1 said:
I believe you misunderstood my final question but that is okay.
InsanePostman: Are you also known as huntingoctopus on other sites?
Click to expand...
Click to collapse
I am not. It used to be an old gamer tag that I used for various games. On a side note I still can't get past step 1. Phone fails to re-enumerate after flashing .sbf file.

Motorola atrix 4g stops booting at logo and flashes red light

Hi,
I have a Motorola atrix 4g. The phone will not boot up. It turns on and the Motorola logo come then the red light stars blinking. after a minute or so the phone restarts and repeats the process. I tryed factory hard reset but no luck.
i fount this on the web http://forum.xda-developers.com/showthread.php?t=966405 but has no idea how to do this.
Pleas help me
thank you
Pgeorge
It happens if there is somthing wrong when you install a rom
try to find another rom and flash it if you unlocked the bootloader
or flash ATT 4.5.91 Rom via RSD Lite ONLY IF YOU HAVE LOCKED BOOTLOADER
Jack Krauser said:
It happens if there is somthing wrong when you install a rom
try to find another rom and flash it if you unlocked the bootloader
or flash ATT 4.5.91 Rom via RSD Lite ONLY IF YOU HAVE LOCKED BOOTLOADER
Click to expand...
Click to collapse
hi,
thank you for the fast replay. I have rsd installed, but where can i find this rom
Softbrick
Is bootloader unlocked? Says on m logo?
Sent from my MB860 using xda premium
stevendeb25 said:
Softbrick
Is bootloader unlocked? Says on m logo?
Sent from my MB860 using xda premium
Click to expand...
Click to collapse
It is not unlocked. There is nothing on the logo. Only the m
help
kinggeorge3287 said:
It is not unlocked. There is nothing on the logo. Only the m
Click to expand...
Click to collapse
help please
go here to download any atrix related files
visit that site, it contains everything for the atrix and the best place to get roms, tools, utilities, mods, tweaks, and so forth....
but first download the zip file below this message. I uploaded the zip file for you that has adb, fastboot & moto-fastboot(lets you install .img over 100mb), the necessary dll files & atrix recovery image & command.bat which just opens the command prompt window for you and puts you into the folder so you dont have to navigate anywhere in command prompt to located folders.
first try this, download the zip file, extract to any folder like c:\fastboot
then run the command.bat file to quickly bring up a command prompt and type these commands
Code:
fastboot -w
fastboot flash recovery recovery.img
fastboot reboot
that may solve your issue if your kernel installed properly and the boot.img file was properly written to the boot partition. If it doesn't solve your problem, go to that link above to find the kernel for whatever rom you're on, att, cm7 or cm9. Get the correct kernel thats compatible, pull out the boot.img from that zip file and also place it into your fastboot folder, then go to fastboot mode again and type "fastboot flash boot boot.img" and then fastboot reboot.
android-DEP said:
go here to download any atrix related files
visit that site, it contains everything for the atrix and the best place to get roms, tools, utilities, mods, tweaks, and so forth....
but first download the zip file below this message. I uploaded the zip file for you that has adb, fastboot & moto-fastboot(lets you install .img over 100mb), the necessary dll files & atrix recovery image & command.bat which just opens the command prompt window for you and puts you into the folder so you dont have to navigate anywhere in command prompt to located folders.
first try this, download the zip file, extract to any folder like c:\fastboot
then run the command.bat file to quickly bring up a command prompt and type these commands
Code:
fastboot -w
fastboot flash recovery recovery.img
fastboot reboot
that may solve your issue if your kernel installed properly and the boot.img file was properly written to the boot partition. If it doesn't solve your problem, go to that link above to find the kernel for whatever rom you're on, att, cm7 or cm9. Get the correct kernel thats compatible, pull out the boot.img from that zip file and also place it into your fastboot folder, then go to fastboot mode again and type "fastboot flash boot boot.img" and then fastboot reboot.
Click to expand...
Click to collapse
Hi,
I tryed doing this, but i get a error " Failed to process command flash: recovery error (0x180002)
I think when i tried to flash rom with RSD LIght may have done something to the files. and it was no help. I dont get a flashing red light now. only the phone stops booting at M logo.
Now How do i flash new rome ? Do i use RSD Light or something else. I know that RSB Requires .sbf file but all the files i see in the site you gave me are .zip.
i also tryed the fastboot flash boot boot.img and no luck, it gvies me the error "Failed to process command flash: recovery error (0x180002)"
thank you for the replay
Pgeorge
do you have clockworkmod recovery installed or any custom recovery installed? if not, then thats why it wont flash, your bootloader is locked.
the whole idea behind using clockworkmod recovery is to avoid using RSD to flash sbf files which can brick the phone easily. Its best to avoid using RSD to flash sbf files on your phone at all costs and leave only as a last resort method if you just cannot recover the phone.
Flashing a new rom would normally be done by already having your phone rooted and unlocked with clockworkmod recovery or some other custom recovery installed so you can boot into recovery and choose "install from zip" and point to the zip file that has the rom. The custom recovery does the flashing for you and its a safer method of flashing roms on the phone than RSD.
If you got no other choice and I know what thats like, i been there too. Download RSD Lite v5.6, should be a free download online somewhere, and then search online for "1FF-olympus-user-2.3.6-4.5.141-111212-release-keys-signed-ATT-US-GAS_NA_OLPSGBATTSPE_P012.sbf", then use RSD to flash that sbf onto phone.
Before trying that, goto http://samcripp.com/files/ and in the folder OTA Updates, download the first file named Blur_Version_91.4.5.141.MB860.ATT.en.US.zip and put it into the fastboot folder, boot into fastboot again and try "fastboot update Blur_Version_91.4.5.141.MB860.ATT.en.US.zip" and you may be able to get away with just using fastboot to flash that update onto the phone to restore corrupt files. I would try this before using RSD to flash the phone
android-DEP said:
do you have clockworkmod recovery installed or any custom recovery installed? if not, then thats why it wont flash, your bootloader is locked.
the whole idea behind using clockworkmod recovery is to avoid using RSD to flash sbf files which can brick the phone easily. Its best to avoid using RSD to flash sbf files on your phone at all costs and leave only as a last resort method if you just cannot recover the phone.
Flashing a new rom would normally be done by already having your phone rooted and unlocked with clockworkmod recovery or some other custom recovery installed so you can boot into recovery and choose "install from zip" and point to the zip file that has the rom. The custom recovery does the flashing for you and its a safer method of flashing roms on the phone than RSD.
If you got no other choice and I know what thats like, i been there too. Download RSD Lite v5.6, should be a free download online somewhere, and then search online for "1FF-olympus-user-2.3.6-4.5.141-111212-release-keys-signed-ATT-US-GAS_NA_OLPSGBATTSPE_P012.sbf", then use RSD to flash that sbf onto phone.
Before trying that, goto http://samcripp.com/files/ and in the folder OTA Updates, download the first file named Blur_Version_91.4.5.141.MB860.ATT.en.US.zip and put it into the fastboot folder, boot into fastboot again and try "fastboot update Blur_Version_91.4.5.141.MB860.ATT.en.US.zip" and you may be able to get away with just using fastboot to flash that update onto the phone to restore corrupt files. I would try this before using RSD to flash the phone
Click to expand...
Click to collapse
Well i tryed everything you provided, but no luck. I tryed the RSD but it dont go past the M logo after flash. any other way you know?
thnak you
pgeorge
http://forum.xda-developers.com/showthread.php?t=1163342
you said that site doesnt have any SBF files to download, this is a good example of why the owner decided against posting the sbf files online. A lot of people from what I heard, were either soft bricking their phones into temporary hat weights or going full out hard into brick city on a one way ticket joy ride. Flashing sbf files is very risky and RSD tool isn't really meant for the public to be downloading to use at home and flash full roms over their devices. Thats a Motorola utility and it's not exactly a risk-free method of flashing the rom inside these phones. Plus getting SBF files online, you rarely know 100% if its compatible with your model phone or where came from exactly and that it's integrity can be checked for 100% consistency that nothing half-way through the file is missing any chunks of code or is corrupt. Try sticking to only using fastboot & adb & get clockworkmod recovery to make FULL and complete devices backups.
Now that I learned my lesson a few times, no matter what, first thing I always do in recovery is make a backup before I flash anything at all, just in case of just in case, its better to measure twice and cut once.
try that link above and restore stock gingerbread 2.3.4, phone doesnt need to be unlocked or root, and make sure to use "moto-fastboot.exe" it lets you push\pull & install files larger than 200MB onto phone through fastboot, the regular fastboot has some limit on file sizes
Hi,
to give you a update noting worked. The link you provided dont have any working lnks to download. I tryed some other once and no luck. It gave me "failed to boot 1". so i flashed this file "1FF-olympus-user-2.3.6-4.5.141-111212-release-keys-signed-ATT-US-GAS_NA_OLPSGBATTSPE_P012.sbf" it went away, but no boot after the logo. I don't know what i am doing wrong. Any other ideas?
Thank you
Pgeorge
android-DEP said:
http://forum.xda-developers.com/showthread.php?t=1163342
you said that site doesnt have any SBF files to download, this is a good example of why the owner decided against posting the sbf files online. A lot of people from what I heard, were either soft bricking their phones into temporary hat weights or going full out hard into brick city on a one way ticket joy ride. Flashing sbf files is very risky and RSD tool isn't really meant for the public to be downloading to use at home and flash full roms over their devices. Thats a Motorola utility and it's not exactly a risk-free method of flashing the rom inside these phones. Plus getting SBF files online, you rarely know 100% if its compatible with your model phone or where came from exactly and that it's integrity can be checked for 100% consistency that nothing half-way through the file is missing any chunks of code or is corrupt. Try sticking to only using fastboot & adb & get clockworkmod recovery to make FULL and complete devices backups.
Now that I learned my lesson a few times, no matter what, first thing I always do in recovery is make a backup before I flash anything at all, just in case of just in case, its better to measure twice and cut once.
try that link above and restore stock gingerbread 2.3.4, phone doesnt need to be unlocked or root, and make sure to use "moto-fastboot.exe" it lets you push\pull & install files larger than 200MB onto phone through fastboot, the regular fastboot has some limit on file sizes
Click to expand...
Click to collapse
kinggeorge3287 said:
Hi,
to give you a update noting worked. The link you provided dont have any working lnks to download. I tryed some other once and no luck. It gave me "failed to boot 1". so i flashed this file "1FF-olympus-user-2.3.6-4.5.141-111212-release-keys-signed-ATT-US-GAS_NA_OLPSGBATTSPE_P012.sbf" it went away, but no boot after the logo. I don't know what i am doing wrong. Any other ideas?
Thank you
Pgeorge
Click to expand...
Click to collapse
when rds end flashing the sbf the phone gets a bootlop or failed to boot error again?
lucamibel said:
when rds end flashing the sbf the phone gets a bootlop or failed to boot error again?
Click to expand...
Click to collapse
it starts up, the M logo comes and it freezes there. To turn the phone off i have to pull the battery.
thank you
Pgeorge
Restore Your Motorola Atrix 4G Back to 4.5.91 Stock Firmware
it helps to remove any problem related to rom..
With so many Android phones literally flooding the market these days, it’s no wonder that there are also so many firmware upgrades and custom firmware being developed and released every now and then. A superior device with great stuff neatly packed into it, the Motorola Atrix 4G is one of the devices for whom developers have devoted significant firmware love.
One reason for the attention that devs give to the Atrix 4G is that it is a fantastic device with a dual-core Nvidia Tegra 2 processor and robust ability for handling impressive graphics and video without choking. Together with its powerful processor and 1 GB of RAM, the Atrix 4G is a mean powerhouse that can be further exploited with the use of third-party applications and custom ROMs.
In an age where technology is constantly changing at an alarming pace it is important to always have a trusted source to get your updates in a timely fashion. Custom ROMs and factory firmware updates have played a crucial role in the development in many of our devices.
For those of you who have rooted your Atrix 4G and already have installed custom ROMs, then you might already have some bad experiences with regards to unofficial firmware sources. Unofficial firmware such as custom ROMs are literally filled with many bugs and disabled features. In many cases, these ROMs are not stable for daily use.
Luckily for owners of the Motorola Atrix 4G, there’s an escape hatch for reverting to stock, functioning firmware and return the phone to its factory state.
In this tutorial, you will learn how to roll back your Motorola Atrix 4G to the official firmware version 4.5.91, regardless of your current firmware
HERE IS THE LINK FOR YOUR PROBLEM....BEST OF LUCK
kinggeorge3287 said:
it starts up, the M logo comes and it freezes there. To turn the phone off i have to pull the battery.
thank you
Pgeorge
Click to expand...
Click to collapse
then you can now try unlocking and flashing cwm recovery and flash a custom rom to avoid using rds again
sikkijazz said:
Restore Your Motorola Atrix 4G Back to 4.5.91 Stock Firmware
it helps to remove any problem related to rom..
With so many Android phones literally flooding the market these days, it’s no wonder that there are also so many firmware upgrades and custom firmware being developed and released every now and then. A superior device with great stuff neatly packed into it, the Motorola Atrix 4G is one of the devices for whom developers have devoted significant firmware love.
One reason for the attention that devs give to the Atrix 4G is that it is a fantastic device with a dual-core Nvidia Tegra 2 processor and robust ability for handling impressive graphics and video without choking. Together with its powerful processor and 1 GB of RAM, the Atrix 4G is a mean powerhouse that can be further exploited with the use of third-party applications and custom ROMs.
In an age where technology is constantly changing at an alarming pace it is important to always have a trusted source to get your updates in a timely fashion. Custom ROMs and factory firmware updates have played a crucial role in the development in many of our devices.
For those of you who have rooted your Atrix 4G and already have installed custom ROMs, then you might already have some bad experiences with regards to unofficial firmware sources. Unofficial firmware such as custom ROMs are literally filled with many bugs and disabled features. In many cases, these ROMs are not stable for daily use.
Luckily for owners of the Motorola Atrix 4G, there’s an escape hatch for reverting to stock, functioning firmware and return the phone to its factory state.
In this tutorial, you will learn how to roll back your Motorola Atrix 4G to the official firmware version 4.5.91, regardless of your current firmware
HERE IS THE LINK FOR YOUR PROBLEM....BEST OF LUCK
Click to expand...
Click to collapse
Hi,
doing this gave me SVF:108:1:2
fail to boot 3
starting rsd mode
lucamibel said:
then you can now try unlocking and flashing cwm recovery and flash a custom rom to avoid using rds again
Click to expand...
Click to collapse
So how do i go about doing this? is there a link i can use?
thank you
Pgeorge
kinggeorge3287 said:
So how do i go about doing this? is there a link i can use?
thank you
Pgeorge
Click to expand...
Click to collapse
help please
kinggeorge3287 said:
help please
Click to expand...
Click to collapse
I am able to get into android recovery. It has a option to update from sdcard. Can i do something with this?
Pleas help
Pgeorge

Categories

Resources