carinlynchin gave me an idea to start this thread. Although I highly doubt it, is there any way to speed up boot time???
I downloaded blade buddy, free from the market, and in there, there is an option to disable boot animation completely. It helped considerably for me.
Did that cut boot times???
Does that remove both the dual core factory moto logo and the carrier logo or just the carrier (or I guess ROM) logo? How much faster would you say? Is it just a black screen while it boots?
As soon as the screen jumps and the Motorola logo starts moving up and down with a puddle rffect around it, and the Sprint bootscreen, believe it or not, those two are one bootscreet. As for faster time, I'd like to know, myself.
Related
Hello!
I flashed my HD2 a few times to try to get a ROM that was flawless, but that unfortunately didn't happen. All of the ones I tried were really slow and now I'm thinking it might just be the phone I need to replace. Maybe I got a bad unit.
Anyway, when I went to go to send it in I realized that there were custom boot screens from the ROMs I installed, however I got rid of them all except for ONE SCREEN that appears when the phone boots to the screen that shows you all of the ROM information (The three lines that start with R in the first line, G in the second line and D in the third line) where it's the LEODragon ROM wallpaper from a prior ROM I had and I can't get it to disappear no matter what I do! HELP!
Thanks for your help in advance!
those numbers remain there ! and they were there since the beginning u got ur phone ! so dont worry ! just give it for service! everyone has those numbers from the day 1 !
you mean the second, non standard splash screen, before the animation, see the watermarking your leo link in my sig for more info
i did exactly the same, you need to make asecondary splash identical to the first, so it all looks like one splash.
So, the droidx and droid 2 can use an app https://market.android.com/details?id=com.jrummy.dxd2.logo.replacer to change the splash screen (not the boot animation) when starting the phone, and I was curious if the same were possible for us, since we're all in the motorola family?
the motorola "M" just doesnt do it for me
So far I think the following is the only boot screen logo change for the Atrix on these forums:
http://forum.xda-developers.com/showthread.php?t=1089432
Might help you change your own to something else.
Thanks much, that's exactly what I was looking for, its a good start
So I made my first boot animation. There are some great tutorials out there but it still took me about 4-5 hours of constant tweaking and I still am not where I want to be with it. I have embedded a video. Between the splash screen and my boot ani there is several seconds of black screen. Is there anyway to speed up the gap between the two?
Anyway, let me know what you guys think. I can make it available to those that want it.
hi,
thanks to all the great threads on here I have really enjoyed tinkering with the boot animation on my Motorola Razr i
my problem is in timing - I have a sound file of just 20 seconds, but the boot animation completes after about 14 secs
I have tinkered with the frames per second in desc.txt (attached) and tried from 10 - 100 frames set as infinate - but all to no avail.
I 'm beginning to think that it is a result of having unlocked the boot loader at Motorola website
this adds a warning screen to the boot up, which has never bothered me before, and what I now have is 3 screens in my boot sequence -
a Motorola Logo that stays on for about 4 secs, a 12 secs warning screen and 14 secs of my boot animation (pics attached)
I quite like the logo, but would ideally love to get rid of that warning screen as the extra 12 secs would be great to have.
does anyone know if removing it is possible - or if there is any other way to get my animation to last 20 secs or so?
any help would be really appreciated.
for moderators .... is this thread perhaps in the wrong forum?
would it be better suited in the Razr i forum here: http://forum.xda-developers.com/razr-i/themes-apps
if so, please move it.
thanks
I'm close to jumping off a bridge
:crying:
I really am still struggling with this and any help would very welcome ... after having extracted the bin files from the XT890 stock firmware I got here:
http://forum.xda-developers.com/showthread.php?t=2239706
I followed this thread to dedicated to the Razr i to the letter: http://forum.xda-developers.com/showthread.php?t=2340194 .... but failed (see attached pic)
the stocklogo.img file the OP referred in case of a failure was not available, and despite ages of googling I cannot find one
so now I am completely stuck! ... and a tad baffled ... even if I did somehow succeed, what really bothers me is that whilst the OP's say these methods work,
(and apparently replace the 'nag' screen with the Motorola 'M' logo) I currently have both - so would I end up with 2 red 'M' logos? perhaps I'm misreading it all.
whatever, I am now at my wits end and feel quite the fool having never before failed to implement such 'tweaks' found at XDA
My phone suddenly locked. I rely heavily on my phone as i use the android reminder system on my calendar as I have ADHD and cannot remember medication dose times so I set reminders and alarms, but now that my screen is locked onto bootloader unlocked white screen with red letters, I cannot use my phone.
I am having to set a big old fashioned alarm clock, which is horrible to wake upto.
I rooted it a year ago, even though I am very tech niaave, I watched a youtube vid and did it successfully, I wanted to get rid of moto bloatware, but didnt succeed
anyway, I a stuck on bootloader unlocked screen.
Somehow, i dunno how, i have managed to get onto the TWRP screen where I am presented with a number of options in the form of rectangles with one corner cut off.
I just wanna get back into my phone, but dunno which option to choose from these TWRP files, and which button to press to select the right option so i can get back into my phone.
I choose the reboot option on the TWTP screen after swiping it, and the screen just went black.
Every time I try to switch the phone off using the power button I just get this white bootloader unlocked scren again.
All was working well until my phone locked.
I had used ccleaner today and got rid of loads of junk clogging up my system, but phone worked fine after that, it was some auto download that happened later, that seemed to stop things, and lock my screen which was on calendar at the time.
I messed about with it, tried to google and get it to boot up normally, but i get stuck cos of all the jargon as I am tech naiive and amazed i was able to root the phone in the first place.
I just wanna get back into my phone and rid of this white booloader unlocked screen.
to complicate matters more, my battery runs out quickly so its always on charge.
So, if anyone can get me back into my moto E first gen as soon as possible, i would be most appreciative. thanks in advance and sorry for the urgency but i rely heavily on my phone as I am vulnerable and isolated without it.
Those who dont do facebook cant get hold of me.
I also downloaded unlocked bootloader warmin.zip but got stuck in cmd screen on 'waiting for device' so I abandoned that. I was never clear on when to have the phone plugged into the laptop usb.
So, at the moment, it is on a bright white booloader unlocked screen and migt as well be a brick until some kind soul can talk me through in a dummy fashion, on how to get back into my 1st gen moto E.
PS I prefer first gen as it has 2gb as opposed to 1gb internal memory so apps don't keep dissappearing, and I dont get low space messages despite having an sd card like I did with my old 1gb phone.
Please can someone help.