Hey everyone at xda im new here. I have an lg optimus p500 and everytime i try to overclock to 806 it crashes how come that happens?. Im using francos kernel on cm7 rc1 sonygenmod rom. Im not bew to rooting or overclocking..
Sent from my LG-P500 using xda premium
raygarcia95 said:
Hey everyone at xda im new here. I have an lg optimus p500 and everytime i try to overclock to 806 it crashes how come that happens?. Im using francos kernel on cm7 rc1 sonygenmod rom. Im not bew to rooting or overclocking..
Sent from my LG-P500 using xda premium
Click to expand...
Click to collapse
First, I have to tell you that I own an HTC Inspire so I am not certain that this will actually help, but I have seen many cases when people try to overclock their cells and experiencing crashes. The main reason is that your Rom might be overclocked already and then the app you are using might be in conflict with the script in the kernel. The other reason, might be that you phone can´t be overclocked to 806 and therefore you should try a bit less. As I said before I do not own an LG but I am pretty sure that CM7 is overclocked in its kernel...hope it helps.
Another reason can be that your chip can't work at this speed without problems. There's a reason why manufacturers use a certain frequency for their processor, it's a ratio between power consumption, heat, and maybe reliablility... Some processors can handle perfectly the overclock, some don't...
.
Thread moved. Would advise you to read forum rules and post in correct section.
Failure to comply with forum rules will result in an infraction and/or ban depending on severity of rule break.
raygarcia95 said:
Hey everyone at xda im new here. I have an lg optimus p500 and everytime i try to overclock to 806 it crashes how come that happens?. Im using francos kernel on cm7 rc1 sonygenmod rom. Im not bew to rooting or overclocking..
Sent from my LG-P500 using xda premium
Click to expand...
Click to collapse
O1 cannot run @ 806mhz...
Tune down ur frequency to 729mhz..
Thanks for all the advice everyone.. i can get the processor clocked at 787 stable without crashin.. ive read reports that they have managed to clock this phone to 806mhz stable no crash. Lol guess in askin my phone for 2 much already huh.
Sent from my LG-P500 using xda premium
I think the stable is 768mhz
Sent from my ATRIX 2 using XDA App
raygarcia95 said:
Thanks for all the advice everyone.. i can get the processor clocked at 787 stable without crashin.. ive read reports that they have managed to clock this phone to 806mhz stable no crash. Lol guess in askin my phone for 2 much already huh.
Sent from my LG-P500 using xda premium
Click to expand...
Click to collapse
The most stable frequency is 729mhz and since you are a n00b, u shud use it since higher frequencies may give you random reboots after an hour and stuff.. different phones have different capabilities... some have even gone to 864mhz which is impossible on 99.9% optimus ones... rest 0.01% are lucky...
for u stable is 787...
everyphone is different and stable at different frequencies...
u can try 806 with franco gamer v20
Lol ik im a n00b. But yeah ive been using 787 without any issues. But i decrease it once in a while when not home to save battery
Sent from my LG-P500 using xda premium
do you think you could provide a link for franco gamer v20? it would really help.
Thanks in advance
Related
So i am running milks CM7 and his kernal as well i used franko's tweeks as seen here
http://forum.xda-developers.com/showthread.php?t=999064 and i was clocking 1200-1300 on Quadrant my CPU persentage of use was very little when i would look on android assistant with like 97% free CPU and i started to notice my scores going down (last time was at 900) and i looked on adroid assistant and my cpu is being used by the user 97% and i dont know what it is i can feel my phone getting slower any ideas????
ok i think i fixed it does anyone know how to delete posts????
dislplin01 said:
ok i think i fixed it does anyone know how to delete posts????
Click to expand...
Click to collapse
How did you fix it?
Sent from my LG-P500 using Tapatalk
Nand backup I had right after I flashed milks CM7 6.3
Sent from my LG-P500 using XDA Premium App
Some ROM's permitted to overclock the Optimus One to 867 MHz,but my one,cant do even 787 MHz,because appear an Kernel panic and they Shutting down,WHY? how to overclock more? and the difference between .32 and .35 kernel?(what are that numbers ?)
787 is stable ..
Overclocking beyond that will reduce the lifetime of the phone and its capacity to withstand overclocking ..787 is quite sufficient ..
from my LG-P500 using xda premium
but mu Optimus the maxium without Kernel panic is 768 MHz,if i put 787 MHz a random time they "kernelPanic" and shutdown uff why? i cant keep it at 787
Might be it has lost its stability ..keep it @600for a few days and try overclocking later..
(806 used to give me kernel panics before but now it doesn't)
Sent from my LG-P500 using xda premium
androidusero1p500 said:
Might be it has lost its stability ..keep it @600for a few days and try overclocking later..
(806 used to give me kernel panics before but now it doesn't)
Click to expand...
Click to collapse
you can use your optimus with 806?????' HOW? *.*
You can't that means you can't. Don't expect miracles, and currently i see no actual need for overclocking as system is smooth enough
androidusero1p500 said:
Might be it has lost its stability ..keep it @600for a few days and try overclocking later..
(806 used to give me kernel panics before but now it doesn't)
Sent from my LG-P500 using xda premium
Click to expand...
Click to collapse
O sh*t!!!! I can only go upto 727 mhz :X I stretch the slider above 727, and it suddenly crashes............
Sent from my LG Optimus One P500 using XDA App
672.. enough juice... i fear overheat
Wrong thread, nothing such as Opimus One.
HawkeyeWPR said:
but mu Optimus the maxium without Kernel panic is 768 MHz,if i put 787 MHz a random time they "kernelPanic" and shutdown uff why? i cant keep it at 787
Click to expand...
Click to collapse
You're better off sacrificing the ~2% difference for better stability.
Different CPU's have different tolerances.
Why so much God dammit! 729 is like waaaaay more than enough.
Sent from my LG-P500 using xda premium
Hey guys,
My ace crashes when its overclocked even a little to about 802 mhz..
I use this kernel: [email protected] AOA110#1
Do i have to change something or are there any other OC kernels?
Thanks
EDIT:Useful comments are appreciated
Sent from my GT-S5830 using xda premium
jdgreat4 said:
Hey guys,
My ace crashes when its overclocked even a little to about 802 mhz..
I use this kernel: [email protected] AOA110#1
Sent from my GT-S5830 using xda premium
Click to expand...
Click to collapse
Uhh. Okay.
Is there a question in there somwhere.
If you were asking for advice, I'd offer 2 points:
1. Don't overclock.
2. Buy a better phone.
so? its normal for overclock, make phone unstable.
hell it can even damage your phone.
u should read about overclock more.
Your ace made in china...hahaha mine can up to 883mhz without prob...blazing fastor....thnks ketut...im using same kernel blackhawk...
Sent from my GT-S5830 using xda premium
It doesn't mean that just because we share the same type of device, the result will also be the same...some ace users can oc that far and become stable(i think) but some cannot..there are many factors for it.. so just find the right tweaks for your phone and enjoy
I'm running the stock ROM rooted and all. After using cynogenmod for a bit I switched back to stock and I can no longer overclock past 1200. Can someone explain or help me out.
Sent from my kickass SAMSUNG-SGH-I777 using xda premium
I think we cannot over clock (OC) with stock kernel. Try Entropy's kernel or Siyah. I am using CM and Siyah and I can OC. I didn't try with stock kernel however.
Thank you. I'll try it and get back
To you
Sent from my SAMSUNG-SGH-I777 using xda premium
Worked like a charm. Thank you
Sent from my SAMSUNG-SGH-I777 using xda premium
the_psykloz said:
I'm running the stock ROM rooted and all. After using cynogenmod for a bit I switched back to stock and I can no longer overclock past 1200. Can someone explain or help me out.
Sent from my kickass SAMSUNG-SGH-I777 using xda premium
Click to expand...
Click to collapse
I was able to overclock to 1.452 stock rooted with Zedomax kernel using Tergrak Overclock from Android Market... give that a try
Sent from my SAMSUNG-SGH-I777
Kernel bro. You need a kernel with the abilities to overclock. Stock kernel can't.
Tegrak in the market. Buy the ultimate version for oc as high as ya want + core and internal voltage tweaks.
The free version lets you oc a little & no voltage adjustments.
Sent from my SAMSUNG-SGH-I957 using XDA App
This may sound a bit patronizing but if you cannot over clock due to the wrong kernel and not realize it, it may be best to do more research and make sure you understand what's going on before trying to over clock.
Sent from my GT-I9100 using xda premium
It does sound patronizing, but I can't blame you for trying to warn him/her. A lot of people have experience with computer OCing though, and may be new to Android.
Quadra_Slam said:
It does sound patronizing, but I can't blame you for trying to warn him/her. A lot of people have experience with computer OCing though, and may be new to Android.
Click to expand...
Click to collapse
I understand that people overclock their computers, but overclocking an android device is different since you cannot just boot into the bios, thus I encourage people to research before trying something they may be unfamiliar with. Otherwise someone will have to end up hoping their warranty/phone insurance or whatever will cover something going wrong due to overclocking.
you can only overclock with a kernel that is compatible with overclock
Do you really need to over clock? I haven't seen a reason to on this beast of a phone. Its not like the captivate was.
Sent from my SGH-I777 using XDA App
You mean there's no option anywhere, or that setcpu won't let you?
Sent from my SGH-I777 using XDA
How does this thread keep getting bigger? Problem solved in 2nd post, finished in the 4th. Lock it down, Red5.
Good evening guys. I started this thread because I'm a bit confused on what is the best OC for our SGA. Can someone help on this?
I´m using No-frills CPU Control. If it is the best, don´t know but it works and it is free
ebmrulez said:
I´m using No-frills CPU Control. If it is the best, don´t know but it works and it is free
Click to expand...
Click to collapse
How high can you go? with respect to the stability.
The overclock capabilities depend on the kernel the app will just help you access the them
Ketuts Blackhawk kernel offers 902MHz overclock
----------------
Sent from my Ace. Galaxy Ace
jumbobombo said:
The overclock capabilities depend on the kernel the app will just help you access the them
Ketuts Blackhawk kernel offers 902MHz overclock
----------------
Sent from my Ace. Galaxy Ace
Click to expand...
Click to collapse
Thanks sir.
pakeronjay said:
How high can you go? with respect to the stability.
Click to expand...
Click to collapse
Some can go higher than others. Mine can reach 940 stable maybe yours can or cannot
Doo:DAce said:
Some can go higher than others. Mine can reach 940 stable maybe yours can or cannot
Click to expand...
Click to collapse
What ROM are you using?
pakeronjay said:
How high can you go? with respect to the stability.
Click to expand...
Click to collapse
I don´t use OC Kernel atm and i never tried out how high my Ace can go.
There are differents in how high u can go, try out at your own Risk
My phone gets into a boot loop if I overclock it to 883MHz, so be careful while overclocking. You might kill your ace
Sent from my GT-S5830 using Tapatalk
I will try to run No-frill CPU Control and post some feedback later or tomorrow. Thanks guys. Suggest different apps, for me to observe what is better for may SGA.
Samsung tests their processors to work stable at 800Mhz only.
Stable OC is a kind of lucky draw.... My Ace is stable max at 921-940Mhz......
Sent from my GT-S5830 using xda premium
pvrx said:
Samsung tests their processors to work stable at 800Mhz only.
Stable OC is a kind of lucky draw.... My Ace is stable max at 921-940Mhz......
Sent from my GT-S5830 using xda premium
Click to expand...
Click to collapse
+1
I use setcpu i dont know if its the best but is enough for me
I feel lucky because i can get 960mhz stable with cm9, almost 1ghz.
But be careful and do it by your own risk as i said i feel "lucky"
Enviado desde mi GT-S5830
Pepper95 said:
+1
I use setcpu i dont know if its the best but is enough for me
I feel lucky because i can get 960mhz stable with cm9, almost 1ghz.
But be careful and do it by your own risk as i said i feel "lucky"
Enviado desde mi GT-S5830
Click to expand...
Click to collapse
I can do 960 but it force restarts when ever it gets hot.. so 940 is stable for me... guess you are lucky after all..
Sent from my GT-S5830 using XDA
you can use setCPU application. You can buy it from market. But I prefer not to OC my phone as its drains battery and harmful too...
I'm using SetCPU (I love it since it allows to create profiles, like charging, screen off, etc...). I'm overclocked to ~860Mhz without any problems.
syed.sayeed96 said:
I can do 960 but it force restarts when ever it gets hot.. so 940 is stable for me... guess you are lucky after all..
Sent from my GT-S5830 using XDA
Click to expand...
Click to collapse
overclocking is too much desired.... but in a hot condition .... keep ur ace cool at normal MHZ of 800 else u can end up of excessive battery heating ,, retarding battery life...and may be a processor burn ....
ambujpriyadarshi1991 said:
overclocking is too much desired.... but in a hot condition .... keep ur ace cool at normal MHZ of 800 else u can end up of excessive battery heating ,, retarding battery life...and may be a processor burn ....
Click to expand...
Click to collapse
I know.. now I am sticking to 600..
Sent from my GT-S5830 using XDA
Jean1501 said:
I'm using SetCPU (I love it since it allows to create profiles, like charging, screen off, etc...). I'm overclocked to ~860Mhz without any problems.
Click to expand...
Click to collapse
Then what d hell is use of governers........
Sent from my GT-S5830 using xda premium
Mine stable at 940Mhz
Sent from my GT-S5830 using xda premium
Pepper95 said:
+1
I use setcpu i dont know if its the best but is enough for me
I feel lucky because i can get 960mhz stable with cm9, almost 1ghz.
But be careful and do it by your own risk as i said i feel "lucky"
Enviado desde mi GT-S5830
Click to expand...
Click to collapse
wow...my ace kindda weird i thought or the kernel is the fault because when i using cm7 with ketut's kernel i can get 960 but in cm9 can only get 940..
both using set cpu with performance governor..