[GUIDE] Fix Mainver Error - HTC Rezound

I am in no way, shape, or form held responsible if you brick your phone from this fix.
Well, i finally have something useful for the community!!!
this will take your main version to whatever you want, i took mine down to 1.00.000.0 and it worked!!
I was at 3.whatever ics is, but not anymore!! its fixed!!!
here are the steps
Before you start, disable HTC Sync
1.Connect phone to computer, enable charge mode
2.Open adb cmd and type : adb shell
3.Type su
4. if you get # symbol continue
5.Type : dd if=/dev/block/mmcblk0p24 of=/sdcard/misc.img (YOU CAN COPY THE IMG TO EITHER sdcard, which is internal memory, or sdcard2, which is removal card)
6. Switch to USB mode
7.copy misc.img from the root of the sdcard to your computer
8.Open misc.img with HeX Editor XVI32
9.Find the version and change it. it will be the first area in the the upper right in the screen of the app
10.change the number in whatever you want. (has to be in the form of.. x.xx.xxx.x
11.Save it and upload it to the root of the sdcard with miscnew.img name
12. Switch to charge mode
13.Type adb shell, su dd if=/sdcard/miscnew.img of=/dev/block/mmcblk0p24
14.Reboot and you are READY TO ROLL!
Once your done. And you wanna flash the new radio and hboot and all that fun stuff. Do a backup of your Rom http://db.tt/0UfbfrIs click that. Then relock your hboot, then flash that file in hboot and you let it update. then unlock once done installing. Then reflash your recovery.. and restore your Rom and your golden
Feel free to donate if you'd like,

---

Now that's some good info for everyone. Thanks for posting this. I will ne adding a link to your thread in my Rom threads

---

spread the word man, it worked liked a charm, got the new radio and everything to load just fine. im happy

---

You sir are a god! Now I want to be home to do it
Sent from my ADR6425LVW using XDA App

---

I can't find the image within the sdcard for some reason. I see the process when it writes it but its nowhere to be found??
Edit:Nvm found it, turned out I had to be in USB mode.
Before step one like always ( disable htc sync/ in usb/develop mode)
-After step 4 switch to USB mode
-After the 1st 8# (lol) switch back to USB mode lol
some little steps you may add
Edit#2: Very nice, worked out well, though instructions can include a little more detail, but all-in-all good find Mainver 1.00.000.0 lol. Now I'm back in business again and start flashing again.

---

Posting this in a few threads... Great job!

---

Remember that sdcard is actually the internal sd, sdcard2 is for external
Sent from my ADR6425LVW using XDA App

---

This is awesome. I cant wait to do this. Thanks man!!!

---

dejahboi said:
Before step one like always ( disable htc sync/ in usb/develop mode)
-After step 4 switch to USB mode
-After the 1st 8# (lol) switch back to USB mode lol
some little steps you may add
Click to expand...
Click to collapse
there ya go, updated OP

---

mrbracht said:
there ya go, updated OP
Click to expand...
Click to collapse
Nice If i were admin, I'd sticky your thread LoL. It's seriously useful method in the long run.

---

dejahboi said:
Nice If i were admin, I'd sticky your thread LoL. It's seriously useful method in the long run.
Click to expand...
Click to collapse
Yes it is. I'm no dev but I was trying to figure it out for the past 5 hours. Finally got it and now I'm going to bed. Ha
Sent from a cellular telephone

---

mrbracht said:
spread the word man, it worked liked a charm, got the new radio and everything to load just fine. im happy
Click to expand...
Click to collapse
Wooooooo hold up .....New radio to install?
Sent from RezROM ICS

---

lllboredlll said:
Wooooooo hold up .....New radio to install?
Sent from RezROM ICS
Click to expand...
Click to collapse
Yeah. From the new ota... I took the firmware.zip and renamed it PH98IMG.zip and flashed it. New hboot and radio and what not..
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
It also gives ya hboot 2.11
Sent from a cellular telephone

---

Updated op with a ghetto instructioned radio flash.
Sent from a cellular telephone

---

the numbers after clear auto image
i dont see any version
says clear autoimage 2.10.xxx.11
is that what i change? to 1.00.000.0?

---

stoffelck said:
i dont see any version
says clear autoimage 2.10.xxx.11
is that what i change? to 1.00.000.0?
Click to expand...
Click to collapse
I'm not around a computer right now, but there would be no x's in the number groups. It should be one of the first numbers listed in the upper right hand.
Sent from a cellular telephone

---

sorry i put the xxx in because i had already changed the number. ok i wrote it back .
thanks for the reply

---

stoffelck said:
sorry i put the xxx in because i had already changed the number. ok i wrote it back .
thanks for the reply
Click to expand...
Click to collapse
Not a problem. Let me know how it turns out for ya.
Sent from a cellular telephone

---

Also. Just to make sure. The xxx are just examples. Obviously you enter numbers instead of x's
Sent from a cellular telephone

---

mrbracht said:
Also. Just to make sure. The xxx are just examples. Obviously you enter numbers instead of x's
Sent from a cellular telephone
Click to expand...
Click to collapse
I did step by step but my mainver wont change!!