Related
ok so ive just tryed to flash the uk generic .184;
flashing failed because stupidy i forgot to enable usb debugging tryed to boot phone to enable sony ericsson screen loads then a screen with an explanation mark and a phone appears and it turns off again
someone please help!!
Try using PC companion or seus to repair it
Sent from my R800i using XDA App
yea im gonna try that now cheers i hope it works!!!
ok so pc compainion repair didnt work said to go to support online?! trying again now but doesnt look good!
my phone is still under warrenty right because i havent unlocked bootloader or anything?
EDIT OKSO I DOWNLOADED THE UDATE SERVICE FROM SONY REINSTALLS AND SEEMS TO BE WORKING AS SHOULD AGAIN THANK ****!
NOW DEBATING TRYING IT AGAIN HAHA
Give it a shot. Just enable the Dev mode.
As long as your bootloader is locked SEUS can reapir the phone all day and night from being bricked.
Follow the guide here, i did with no problems. I didnt have usb debugging on before flashing .184 and it worked fine.
Maybe it didnt properly install the first time. When done it should say something like flash successful turn on phone.
Or maybe your USB cable came out of the phone. I know mine doesn't feel secure when plugged in.
yea not sure what is was but flashed again an now im rooted with 2.3.3
cheers for the help people!
Cool, have fun.
the story is simple
i was unlocking my BL using the BL unlocking tool
but during the beginning of the progress my laptop craches
my phone does nothing anymore not even the led when
i press the powerbutton nothing happens
when i charge no led activity
with flashtool or connecting to pc nothing happens
can somebody help me out
i bought a new one but i would like to make it work again
kkdamion said:
the story is simple
i was unlocking my BL using the BL unlocking tool
but during the beginning of the progress my laptop craches
my phone does nothing anymore not even the led when
i press the powerbutton nothing happens
when i charge no led activity
with flashtool or connecting to pc nothing happens
can somebody help me out
i bought a new one but i would like to make it work again
Click to expand...
Click to collapse
**** happens when use a PC instead a laptop
out of joke.
Let it charge for a few hours and after that try to turn it on. if you feel the vibration maybe you´re able to start all over again...flash a stock rom.
if you can´t feel any vibration, well...you may start to think buy a new phone and a laptop
i charged it for 5 hours but i cant feel a thing
i bought a new x10 and i put a fullycharged battery in it but nothing
i think i have a expensive dummy phone
maybe if somebody know if car restore it trough adb or something
Try to use sony's pc companion....
when you connect your phone to laptop it won't see it.
click on the left icon in pcc.. a window will open,.. on my laptop there is a link to REPAIR PHONE....
if you click on it... it will say what to do..
You will have the stock rom on your x10!!
it worked for me.... only thing is... it's stock again.. (so unrooted)
hope it works for your
kkdamion said:
the story is simple
i was unlocking my BL using the BL unlocking tool
but during the beginning of the progress my laptop craches
my phone does nothing anymore not even the led when
i press the powerbutton nothing happens
when i charge no led activity
with flashtool or connecting to pc nothing happens
can somebody help me out
i bought a new one but i would like to make it work again
Click to expand...
Click to collapse
Sir you hard bricked your phone. and the only thing you can do to this is to "JTAG" it.
5 months ago I bought my Xperia Ray, unlocked the bootloader, rooted it, flashed aire's kernel and rom and everything was good until yesterday. A friend was using it, he was playing fieldrunners and all of a sudden it sort of froze with only the white LED on and the screen off. I tried holding the power button to shut it off with no avail. I then took the battery out then back in to restart it and no response at all. Tried connecting the charger but the LED would not turn on and since then, my ray has been like that. I don't know what to do, flashtool, update service or pc companion can't recognize the phone, but when I plug it in, it appears on the device driver manager as ZEUS flash drive (which I think is normal), but it is just not recognized and the LED doesn't even turn on when charging or connected to the pc. I want to know if it's fixable or not
Any help would be very appreciated! Thanks in advance.
Try full charge ur phone? Maybe is just battry drop or flash it using seus? Fastboot mode working?
Sent from my ST18i using xda premium
The thing is I don't know if it's really charging, no LED when I connect it. I already left it charging for a whole day and still nothing... I will try to charge the battery using a different phone. And no fastboot or fastmode at all, no LED to know if it's on either.
Did you overclocked it?if yes you could have burn the cpu
Inviato da me!
Unfortunately I did, to the typical 1.4, I wasn't sure if it was that, because it wasn't even warm when it happened, but that was the one answer I did not want to hear u.u. Is there anything that can be done?
Gusion00 said:
Unfortunately I did, to the typical 1.4, I wasn't sure if it was that, because it wasn't even warm when it happened, but that was the one answer I did not want to hear u.u. Is there anything that can be done?
Click to expand...
Click to collapse
Wait,i'm not totally sure of that,but is possible,however if none of the other method worked i think the last resource is sony service,if you are lucky is possible they give you a new phone without investigate about bootloader,kernel etc...many people have reported that,good luck,and happy new phone!:beer:
Inviato da me!
Well... I unlocked the bootloader the official way :s I don't know if they check the iem before receiving it.
Gusion00 said:
5 months ago I bought my Xperia Ray, unlocked the bootloader, rooted it, flashed aire's kernel and rom and everything was good until yesterday. A friend was using it, he was playing fieldrunners and all of a sudden it sort of froze with only the white LED on and the screen off. I tried holding the power button to shut it off with no avail. I then took the battery out then back in to restart it and no response at all. Tried connecting the charger but the LED would not turn on and since then, my ray has been like that. I don't know what to do, flashtool, update service or pc companion can't recognize the phone, but when I plug it in, it appears on the device driver manager as ZEUS flash drive (which I think is normal), but it is just not recognized and the LED doesn't even turn on when charging or connected to the pc. I want to know if it's fixable or not
Any help would be very appreciated! Thanks in advance.
Click to expand...
Click to collapse
Maybe a OTA Update ?! - When you try to turn it on does the LED flash When yes, try to use Flashtool to unbrick it.
(Unlock BL or something in Flashtool)
I'm sure you burned your CPU. The Same Happens to my Friend - Just a LED Notification and BlackScreen 4ever LOL
....never exagerate with overclock....
Inviato da me!
Yeah, I'm sure it's burned, but no LED at all! Too bad I can't even replace it through the company since I unlocked the bootloader the official way ... Oh and I didn't exaggerate with the OC, it was the regular 1.4 which I assume most rooted ray users use it at... or am I wrong? :s
Do it step by step;
-First uninstall all sony pc companion components.All sony drivers.
-Then download SEUS from this link.http://db.tt/jpD87GkM
-Install and run.After updating the program close.
-Then download pda.net drivers from here:http://junefabrics.com/android/download.php and install.
-Download and install latest flashtool from the topic.
-After all of these you must relock ray because you need to SEUS to unbrick your phone and it requres locked bootloader.
-Download this ftf file and flash this file via flash tool.http://www.mediafire.com/?g1b5j712ajx4yjd .(Your device must be seen after installing pda.net drivers in green flash mode)So your phone is have locked bootloader.
-So every think is ready.Open SEUS than select your ray that is it.For this step:http://forum.xda-developers.com/showthread.php?t=1492805
-You can unlock your phone again if you want than
Thanks, but still flashtool and SEUS do not recognize the phone. With no LED to tell me if it's either on flashboot or flashmode no flashing can be done. Chances are the cpu really is busted
Hi,
i have problem with SE Xperia Mini Pro (SK17). All of a sudden, screen went black when I was using it. Ever since, I cannot even start the phone. I tried to turn it off, but it doesnt work. I also put the battery out of it, waited for a little while and then put it back - but it still doesnt work. When i try to turn it on, only black screen is what I see.
I tried some repair shop and they told that it is problem with Software and that it needs to be reloaded, I mean that SW has to be replaced with the new one.
Can anybody please help me do that?
Thanks a lot guys
zanex60 said:
Hi,
i have problem with SE Xperia Mini Pro (SK17). All of a sudden, screen went black when I was using it. Ever since, I cannot even start the phone. I tried to turn it off, but it doesnt work. I also put the battery out of it, waited for a little while and then put it back - but it still doesnt work. When i try to turn it on, only black screen is what I see.
I tried some repair shop and they told that it is problem with Software and that it needs to be reloaded, I mean that SW has to be replaced with the new one.
Can anybody please help me do that?
Thanks a lot guys
Click to expand...
Click to collapse
Did it brick while a software update or really just while using it? It's not battery related?
Is your bootloader locked and are you using a custom kernel or rom?
You will have to flash the original firmware again using flashtool. For that download flashtool from the development section and install it. Go to the installation folder > drivers and install all drivers for all devices.
Afterwards download the 4.0.2.A.0.42 .ftf for SK17i from here and place it in the flashtool folder > firmware. Delete all other files in firmware folder.
Open flashtool, click on the flash and select flashmode -> ok. Select the 4.0.2.A.0.42.ftf and click okay. Let your phone turned off and hold volume down and while you hold volume down just connect usb to pc. Don't power phone on, just connect to pc while holding volume down. Flashtool will automaticly flash the firmware. I hope your battery status is more than 25%
Don't disconnect your phone while it's flashing. Afterwards plug phone off and reboot, it should be alive again
Thank you, I will try it.
No, it is not battery related, I checked battery. And it didnt happen during SW upadte, it happend during regular usage. Al of a sudden...
Thanks again for your reply, I will try it as soon as I can. I hope I will be able to do it despite the fact, I have no experiences in such things... (I use iOS, this Android phone belongs to my girlfriend)
zanex60 said:
Thank you, I will try it.
No, it is not battery related, I checked battery. And it didnt happen during SW upadte, it happend during regular usage. Al of a sudden...
Thanks again for your reply, I will try it as soon as I can. I hope I will be able to do it despite the fact, I have no experiences in such things... (I use iOS, this Android phone belongs to my girlfriend)
Click to expand...
Click to collapse
If you have any questions or need screenshots, just tell me I will post them for you
So I did everything as you wrote, but it didnt help Phone was flashed correctly I guess, there were no errors in report. Should I try some different mode or something else? Anything?
Or does it mean, that it is not software failure?
Thanks anyway
Did it vibrate, When you power on the phone?Can you see the boot logo?try to repair it through sony pcc.if the problem still exist then its hardware related. You have to replace the display.....
Sent from my ST15i using xda premium
I think it is your display or ribbon problem.All the sliding phones have this ribbon problem.
Yes, it did vibrate. Im not sure it is display problem, because the display shines, but only black color - it is not as black as if it is turned off.
And no, I can not see boot logo. Only vibration and shining black color
zanex60 said:
Yes, i did vibrate. Im not sure it is display problem, because the display shines, but only black color - it is not as black as if it is turned off.
And no, I can not see boot logo. Only vibration and shining black color
Click to expand...
Click to collapse
try to repair it through Sony PC Companion. if it doesn't work then your display is dead
Beforing that flashing, PC Companion wasnt able to recognize phone - now it does. It immediately recognized, that there s xperia mini pro plugged-in.
So does it mean, that SW is fine and the display is messed up? Now i m trying to repair through pc companion, i ll see if it helps.
Thanks guys anyway for all the help
zanex60 said:
Beforing that flashing, PC Companion wasnt able to recognize phone - now it does. It immediately recognized, that there s xperia mini pro plugged-in.
So does it mean, that SW is fine and the display is messed up? Now i m trying to repair through pc companion, i ll see if it helps.
Thanks guys anyway for all the help
Click to expand...
Click to collapse
Looks like display's got a problem. So try to repair via pc companion (guess bootloader is locked if pcc recognizes your phone) and if that doesn't help bring it to service
PC Companion didnt help. It has just loaded the latest software to the phone, but it is still same - i try to turn it on, it vibrates and then black screen is shining.
So I guess you guys might be right - display might be dead.
What does it mean that bootloader is locked? The phone was recognized, I also updated the SW via PC Companion
zanex60 said:
What does it mean that bootloader is locked? The phone was recognized, I also updated the SW via PC Companion
Click to expand...
Click to collapse
Yes it means your bootloader is unlocked and display is dead
Sent from my ST15i using xda premium
well... display + ear loudspeaker (or flex cable can it be, i m not sure)...
i m not sure if it s worth repairing (I bought it second hand, i dont have warranty certificate)
You mean warranty for phone? Ask at service center how much it is to repair without warranty certificate...
And: No if pcc recognizes phone the bootloader is locked!
Sent from my SK17i running Jelly Bean via CM10
Try this:
Download UnbrickingXperia2011.zip file from here: http://www.mediafire.com/?s166qsg8qaaxc43
Unpack the .zip file and place the .ftf file in Flashtool\firmwares folder.
Open Flashtool.
Get your phone to flashmode, make sure it is turned off, press down Volume DOWN button and connect USB cable.
In Flashtool, click the lightning button, pick Flashmode and choose the Xperia_2011_FreeXperia_ALL.ftf file.
Let Flashtool finish.
Now do what mihahn said.
I hope it helps, if not then it is a display problem
Eventually, there was nothing left to try, so I went so mobile repair service a had it diagnosed.
The only problem was flex cable. They also told me that it is quite common problem for slide phones. Fortunately, display was OK.
Hi all,
It seems my X10 mini pro is completely bricked.
Firstly I root my phone
after that I copied the xrecovery and made a restart, till then everything was rolling smoothly.
I backed up and reseted to factory settings. loaded the new update.zip and after the restart that was needed my phone briked
it's not a common brick. I can't use flashtools to recover it.
here is the problem that appears...
6/030/2013 18:30:20 - ERROR - ERR_SEVERITY="MAJOR";ERR_CLASS="SECURITY_CLASS";ERR_DYNAMIC="SIN header verification failed"
16/030/2013 18:30:20 - ERROR - Error flashing. Aborted
Click to expand...
Click to collapse
phone is not responding to any command. Plus it needs to be turned off if you wanna restore the backup you saved previously...when I try to flash it, phone turns ON
I read many guides in this forum to unbrick it but didn't find anything that suits to my occasion.
If any other detail is missing from my report please ask me to add it.
Sorry for my english
Thanks in advance.
Use SEUS to restore Download from:
SEUS
Dont forget to pull of your battery for 4 seconds, for turn off your phone before connect your phone.
gnickz0r said:
Hi all,
It seems my X10 mini pro is completely bricked.
Firstly I root my phone
after that I copied the xrecovery and made a restart, till then everything was rolling smoothly.
I backed up and reseted to factory settings. loaded the new update.zip and after the restart that was needed my phone briked
it's not a common brick. I can't use flashtools to recover it.
here is the problem that appears...
phone is not responding to any command. Plus it needs to be turned off if you wanna restore the backup you saved previously...when I try to flash it, phone turns ON
I read many guides in this forum to unbrick it but didn't find anything that suits to my occasion.
If any other detail is missing from my report please ask me to add it.
Sorry for my english
Thanks in advance.
Click to expand...
Click to collapse
Press home and power buttons together, it will restart the phone, then start pressing the back-button repeatedly to get back into recovery and restore your previous rom from there. (Come to think of it, following my last paragraph below, you probably don't have recovery on your phone anymore, so, as Rempty mentioned above, repairing with SEUS or PC Companion would be the start to recover your phone to a usable state,.)
The error flashtool gave you is because you didn't unlock the bootloader and didn't change the kernel on your phone. It can't flash any non-sony kernel on a locked bootloader.
What is this 'update.zip' you're talking about? Most full roms have more informational names to distinguish between different zips. An update.zip is usually only for hotfixes to ROMS already flashed, and not a complete ROM.
Thanks a lot guys. I solve my problem with SEUS.
Phone completely formated.
Love you guys
Hey guys I hve instaled xrecovery and minicm9 too on my x10 mini pro I hve wiped chache,etc nd when I reboot , it hangs on SE logo plz help me
SE logo?? You forgot to install nAa kernel, do you unlock bootloader??, remember that minicm9 is not for stock kernel.
Sorry for my bad english
Sent from my iPhone6 using xda business
W'll when I try to unlock the bootloader it gives error can u plz help me
william chauhan said:
W'll when I try to unlock the bootloader it gives error can u plz help me
Click to expand...
Click to collapse
use flash tool to unlock ur bootloader
make sure ur fone is rooted
Sent from my U20i using xda premium
I'm already using flashtool bt it's nt working
william chauhan said:
I'm already using flashtool bt it's nt working
Click to expand...
Click to collapse
What's your phone's build date? Ex.11w37(written on the stick placed on the back )
Sent From My BEAST , I mean X8
My build no. Is 2.1.1.A.0.6
Plzz help me..
Plz help me.. I try to unlock the boot loader .. and the phone bricked !!!! what am i going to do??
i try the PC COMPANION but my phone did not detect it..
this is what i did to bring back life to my x10 mp.
Switch phone completely off then if not already running start pc companion. then this step really got to me because of the phone constantly restarting, to get pc companion to detect the phone, i pressed and held the back key down and connected the usb cable just like flashing a new kernel. pc companion then detected the phone as x10. doesnt matter. then start the update and you must do the same thing again to force update service to detect the phone and to give the option to repair. then once thats done follow the prompts through update service, it will then ask you what phone you have, choose x10 mini pro and update.its a long process but be patient and your phone will work again.
Hey guys I used the flashtool to unlock the bootloader and I also followed the steps too but problem is when the phone was rebooted it didnt read the sim card now what should I do ? Please help
thas911 said:
this is what i did to bring back life to my x10 mp.
Switch phone completely off then if not already running start pc companion. then this step really got to me because of the phone constantly restarting, to get pc companion to detect the phone, i pressed and held the back key down and connected the usb cable just like flashing a new kernel. pc companion then detected the phone as x10. doesnt matter. then start the update and you must do the same thing again to force update service to detect the phone and to give the option to repair. then once thats done follow the prompts through update service, it will then ask you what phone you have, choose x10 mini pro and update.its a long process but be patient and your phone will work again.
Click to expand...
Click to collapse
my phone is in HARD BRICKED.. my phone is dead the phone didnt charge and totally dead.. what should i do?? help me??
i also have a hard bricked,even when i put it to charge the phone its not blink the led
help