[ROM] (WIP) Cyanogenmod 9.0.0 Rezound Alpha 2 (February 12, 2012) - HTC Rezound

*Disclaimer
*Liscense
*Features
*Thanks
*Donate To Me
*Instructions (Post 2)
*Downloads (Post 2)
*Mirrors (Post 2)
*Changelog (Post 3)
*Known Issues (Post 3)
*Old Downloads (Post 3)
Click to expand...
Click to collapse
DISCLAIMER:
Code:
#include
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
Click to expand...
Click to collapse
Copyright 2012 dmeadows013
Licensed under the Apache License, Version 2.0 (the "License");
you may not use this file except in compliance with the License.
You may obtain a copy of the License at
http://www.apache.org/licenses/LICENSE-2.0
Unless required by applicable law or agreed to in writing, software
distributed under the License is distributed on an "AS IS" BASIS,
WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
See the License for the specific language governing permissions and
limitations under the License.
Click to expand...
Click to collapse
FEATURES:
-Android Ice Cream Sandwich 4.0.3
-Cyanogenmod Built
-Based off of Joel9614's port for the Evo 3D
-Full CM
-Deodexed
-Zipaligned
-Rooted
-Busybox
-Amazing
Click to expand...
Click to collapse
THANKS:
-Joelz9614 for the base, helping with fixes and things, and just being awesome
-Werdna87 for the Rezound ICS leak
-Droid Vicious for Things to Come
-Wildstang83 for showing me the ropes for developing
-XDA
-RootzWiki
-AndroidPassions
-Everybody that supports me (You are the reason I do this )
-HTC
-Google
-Anyone I missed
Click to expand...
Click to collapse
DONATE:
Donations are never expected but are always accepted!
Click to expand...
Click to collapse
End of post 1. Look in post 2 for the DL links

HOW TO INSTALL:
You MUST Have HTCDEV Unlock!!!!!!!!
Click to expand...
Click to collapse
To Install Premade Zip:
1. Download the Prebuilt zip at the end of this post.
2. Place the file on your SD card and flash.
3. Follow the instructions later in this post to flash the kernel
To Flash the Kernel:
1. Download the prebuilt kernel zip for your specific OS (Windows, Mac OSX, or Linux)
2. Unzip the file
3. Open Command Prompt or Terminal, depending on your operating system.
4. On your device, reboot to HBOOT (Volume Down + Power when device is off)
5. Select the Fastboot option on your device's HBOOT menu (You will know you are in HBOOT if your device has a red-highlighted banner that says 'FASTBOOT' or 'FASTBOOT USB')
6. Plug your phone into your computer if it is not already plugged in
7. When the red banner mentioned above says 'FASTBOOT USB', proceed to the next step
8. Run the following commands on command prompt/terminal
Code:
cd *Path/to/your/downloaded/kernel/folder*
(For Windows) ./fastboot.exe flash boot boot.img
(For OSX and Linux) ./fastboot flash boot boot.img
9. When this completes and says done, reboot and enjoy!
DOWNLOAD LINKS:
-Alpha 2
-Kernel
Mirrors
-Alpha 2
-Kernel
Click to expand...
Click to collapse
​

Changelog:
Code:
**Alpha 1
-Original port
**Alpha 2
-Fixed UI glitches
-Fixed camera
-New base
-Added Gapps
Click to expand...
Click to collapse
What Works:
-Everything that doesn't
Click to expand...
Click to collapse
What Doesn't Work:
-Data
-Phone
-Wifi (Turns on but can't find network)
-Bluetooth
-Texting
Click to expand...
Click to collapse
Old Downloads:
Code:
These downloads are of previous versions that are no longer supported.
For full support and functionality, download the latest version of the rom.
New downloads will also be faster.
-Alpha 1
Click to expand...
Click to collapse
​

noice noice noice

Are we allowed to post yet ?
Sent from my PG86100 using xda premium

the_plattypus said:
Are we allowed to post yet ?
Sent from my PG86100 using xda premium
Click to expand...
Click to collapse
Unless joel is done with his reserves lol

Nice!!!!!!
Sent from my ADR6425LVW using XDA App

And so it begins!
Sent from my Transformer TF101 using Tapatalk

Omg!!!!!! I love you bro lol. I know this is going to be good
sent from my sexy Htc Rezound

hmmm.... interesting/ working/ not working?
edit:
nm ready posts 2 and 3

Oh man, so excited! It's too bad I'll be traveling for work soon and need my phone to be stable!
Keep up the good work all you awesome devs!

justreboot said:
hmmm.... interesting/ working/ not working?
Click to expand...
Click to collapse
Third post lol... Joel and I will get data/calls/texts working when he gets his Rezound though

when i download this later,
do i install the kernel before or after installing the rom?

qudwis said:
when i download this later,
do i install the kernel before or after installing the rom?
Click to expand...
Click to collapse
Doesn't matter

dmeadows013 said:
Third post lol... Joel and I will get data/calls/texts working when he gets his Rezound though
Click to expand...
Click to collapse
is there a date set for the rezound?

dmeadows013 said:
Third post lol... Joel and I will get data/calls/texts working when he gets his Rezound though
Click to expand...
Click to collapse
Was Joel able to nab a Rezzy?

localceleb said:
is there a date set for the rezound?
Click to expand...
Click to collapse
In the next week Joel will get his phone. Then we will do some edits and voila lol

Awesome... always good when we get experienced devs working together.

dmeadows013 said:
In the next week Joel will get his phone. Then we will do some edits and voila lol
Click to expand...
Click to collapse
Cm9 with working data/calls/text oh baby...

Ohh look uploaded lol. Strange issue on boot is when the softkeys light up, you have to lock and the unlock the phone. I think it is kernel related though

Related

[ROM][GT-I9100][4.0.4] CyanogenMod 9 nightly builds | DEVELOPMENT THREAD

DEVELOPMENT THREAD
FOR DEVELOPERS ONLY​
DISCUSSION THREAD FOR USERS:
http://forum.xda-developers.com/showthread.php?t=1419102​
CyanogenMod is a free, community built, aftermarket firmware distribution of Android 4.0 (ICS), which is designed to increase performance and reliability over stock Android for your device.
Code:
#include <std_disclaimer.h>
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*
* Submitting bug reports on nightly builds is the leading
* cause of male impotence.
*/
CyanogenMod is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. Linked below is a package that has come from another Android project that restore the Google parts. CyanogenMod does still include various hardware-specific code, which is also slowly being open-sourced anyway.
All the source code for CyanogenMod is available in the CyanogenMod Github repo. And if you would like to contribute to CyanogenMod, please visit out Gerrit Code Review. You can also view the Changelog for a full list of changes & features.
SOURCES
Click to expand...
Click to collapse
General:
http://github.com/CyanogenMod
Device:
http://github.com/CyanogenMod/android_device_samsung_galaxys2
Kernel:
https://github.com/CyanogenMod/android_kernel_samsung_smdk4210
HOWTO BUILD
Click to expand...
Click to collapse
http://teamhacksung.org/wiki/index.php/CyanogenMod9:How_to_build
HOWTO SEND PATCHES
Click to expand...
Click to collapse
Getting Started:
http://wiki.cyanogenmod.com/wiki/Howto:_Gerrit
Example:
- cd ~/android/system
- repo start branchname CyanogenMod/android_device_samsung_galaxys2
-- Make your changes at device/samsung/galaxys2
- cd device/samsung/galaxys2
- git add -A
- git commit -a
- cd ~/android/system
- repo upload CyanogenMod/android_device_samsung_galaxys2
Navigate to http://review.cyanogenmod.com , click your commit and add codeworkx and xplodwild as reviewer.
placeholder
why not release one with the 2.6x kernel that has a lot less bugs but no mic in calls too?
thanks
EDIT
OH Dear LORD this is the smoothest thing i have ever used... calling works fine for me !!
qwerty warrior said:
why not release one with the 2.6x kernel that has a lot less bugs but no mic in calls too?
thanks
Click to expand...
Click to collapse
with 2.6.x kernel there are a lot more bugs.
muppetterror said:
can't flash it it say installation aborted
Click to expand...
Click to collapse
Instructions for ODIN:
- Extract it
- Copy GApps and Faceunlock ZIPs to your internal SDCard
- Reboot into Download Mode
- Flash Bootloader, Code and Modem using Odin
- After flashing pull battery and reinsert it
- Boot into Recovery
- Flash GApps and Faceunlock ZIPs
- DO A DATA WIPE / FACTORY RESET (otherwise your calendar sync will not work)
- Reboot
muppetterror said:
can't flash it it say installation aborted
Click to expand...
Click to collapse
i love you!!!
codeworkx said:
i love you!!!
Click to expand...
Click to collapse
sorry for beeing a noob... lol i don't read much
Damn it, Vodafone. Y U NITZ?
Thanks for the release codeworkx, you're awesome!
- Boot into Recovery
- Flash GApps and Faceunlock ZIPs
sdcard cannot be mounted in this recovery.
/EDIT:
My bad, I should placed them on sdcard before flashing in odin. XD
It would be great to open a separated help thread, so we can read the updates from this thread easily.
We will get 100 pages of users asking for help in a few hours...
Is it possible to make the phone not crash if you disable the auto update of time and other informations over your mobile network? As far as i can tell, this is mostly what it is used for. It also provides some networking information but maybe switching to manual fixes that? Anyone tried?
http://en.wikipedia.org/wiki/NITZ
i got an error with the cwm zip.
random offset: 0x195
Guys 28.8 is the latest gapps?
Sent from my GT-I9100 using Tapatalk
hervelo said:
It would be great to open a separated help thread, so we can read the updates from this thread easily.
We will get 100 pages of users asking for help in a few hours...
Click to expand...
Click to collapse
Really, if OP allow...
marcelotorres said:
Really, if OP allow...
Click to expand...
Click to collapse
there will be no updates
qasq said:
just one noobish question. is it possible to make one rom from those two that are avalible now? I mean take working mic in calls from this one, and put that into the one that is sometime avalible already, and than make fully funtctional frankenstein from both of them? would be great.
Click to expand...
Click to collapse
no. you ever tried to use half win xp + half win 7? ;-)
MariusWildfire said:
is it possible to use it without a simcard? just playing a bit with ics using wifi for an internet connection ?
Click to expand...
Click to collapse
yes
ddpruel said:
Thanks so much !!
hows the phone function working (cant hang up, no mic, etc) ?
Click to expand...
Click to collapse
works as long as your provider doesnt support nitz
Where is the face unlock zip?
Sent from HydrOG3N MOD S2.
Technology Evolves, Android Evolves.
HydrOG3N is THE Revolution.
Is there a list of supported & non supported providers for nitz? I'd like to know if my provider supports nitz or not. Awesome work guys keep it up! Oh & merry Christmas too all!
Sent from my GT-I9100 using Tapatalk
marcelotorres said:
Really, if OP allow...
Click to expand...
Click to collapse
@ Codeworks
I understood that as an indirect question.
Like: Do you allow somebody to start another thread (without official support of course) for people ask their questions without spamming here, so the community (and not the devs) may be able to try and answer questions/share their experiences)...
Anyway, fröhliche Weihnachten
And thanks to the whole team,
you guys are great
Paradoxxx said:
Where is the face unlock zip?
Sent from HydrOG3N MOD S2.
Technology Evolves, Android Evolves.
HydrOG3N is THE Revolution.
Click to expand...
Click to collapse
in the odin package

[ROM] [WIP] Pure AOSP [4.0.3!!] 1/21/2012 Beta 2

*Disclaimer
*Liscense
*Github
*Features
*Thanks
*Donate To Me
*Instructions (Post 2)
*Downloads (Post 2)
*Changelog (Post 3)
*Known Issues (Post 3)
*Mirrors (Post 3)
*Old Downloads (Post 3)
Click to expand...
Click to collapse
DISCLAIMER:
Code:
#include
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
Click to expand...
Click to collapse
Copyright 2012 dmeadows013
Licensed under the Apache License, Version 2.0 (the "License");
you may not use this file except in compliance with the License.
You may obtain a copy of the License at
http://www.apache.org/licenses/LICENSE-2.0
Unless required by applicable law or agreed to in writing, software
distributed under the License is distributed on an "AS IS" BASIS,
WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
See the License for the specific language governing permissions and
limitations under the License.
Click to expand...
Click to collapse
GITHUB:
We are now on Github. You can download the Github source and contribute fixes, add new features, and improve stability. If I do not feel that what you have done to the code improves the rom, I can take it down. With that, go to our GitHub project page listed https://github.com/dmeadows013/Vigor-AOSP-Project​
Click to expand...
Click to collapse
FEATURES:
-Android Ice Cream Sandwich 4.0.3
-Based off of Joel9614's port for the Evo 3D
-Full AOSP
-CM9 Launcher
-Face Unlock (I think)
-Deodexed
-Zipaligned
-Rooted
-Busybox
-Amazing
Click to expand...
Click to collapse
THANKS:
-Joelz9614 for the base, helping with fixes and things, and just being awesome
-Werdna87 for the Rezound ICS leak
-Demond for the kernel that will come soon and for some fixes
-Wildstang83 for showing me the ropes for developing
-XDA
-RootzWiki
-AndroidPassions
-Everybody that supports me (You are the reason I do this )
-HTC
-Google
-Anyone I missed
Click to expand...
Click to collapse
DONATE:
Donations are never expected but are always accepted!
Click to expand...
Click to collapse
End of post 1. Look in post 2 for the DL links
HOW TO INSTALL:
You MUST Have HTCDEV Unlock!!!!!!!!
Click to expand...
Click to collapse
To Install Premade Zip:
1. Download the Prebuilt zip at the end of this post.
2. Place the file on your SD card and flash.
3. Follow the instructions later in this post to flash the kernel
To Flash the Kernel:
1. Download the prebuilt kernel zip for your specific OS (Windows, Mac OSX, or Linux)
2. Unzip the file
3. Open Command Prompt or Terminal, depending on your operating system.
4. On your device, reboot to HBOOT (Volume Down + Power when device is off)
5. Select the Fastboot option on your device's HBOOT menu (You will know you are in HBOOT if your device has a red-highlighted banner that says 'FASTBOOT' or 'FASTBOOT USB')
6. Plug your phone into your computer if it is not already plugged in
7. When the red banner mentioned above says 'FASTBOOT USB', proceed to the next step
8. Run the following commands on command prompt/terminal
Code:
cd *Path/to/your/downloaded/kernel/folder*
(For Windows) ./fastboot.exe flash boot boot.img
(For OSX and Linux) ./fastboot flash boot boot.img
9. When this completes and says done, reboot and enjoy!
DOWNLOAD LINKS:
-Flashable Rom Beta 2​
Changelog:
Code:
**Beta 2
-New Rebase
-Fixed GPS
-Added Rom Control
-Newest CM9 Launcher
-Got a little closer on Camera
-Got a little closer on USB Mount to PC
-Got a little closer on WiFi
-Rom now installs kernel for you
**Beta 1:
-Original port
Click to expand...
Click to collapse
What Works:
-Everything that doesn't
Click to expand...
Click to collapse
What Doesn't Work:
-Data
-Phone
-Wifi
-Camera
-Bluetooth
-Texting
Click to expand...
Click to collapse
Mirrors
-Beta 2
Click to expand...
Click to collapse
Old Downloads:
Code:
These downloads are of previous versions that are no longer supported.
For full support and functionality, download the latest version of the rom.
New downloads will also be faster.
-Beta 1
Click to expand...
Click to collapse
​
/reserved for boner
Freaking out here meadows.... @chuggz
sent from a newly unlocked and ROMd Rezound!
just had one of those nerdgasm's everyone has been having lmao cant wait!!!! you my friend just made my night...well you and the snow outside lmao
nfrederick said:
/reserved for boner
Click to expand...
Click to collapse
I just went to bed and i already have morning wood thanks to this
sent from a newly unlocked and ROMd Rezound!
Are you Jesus?
Very excited for this. Can't wait.
Lol many things not working. No data, phone, texts, external storage, bluetooth, sound, camera to name a few... Looks like most other things work though...
Man I needed to get some work done tonight. Now I'll just be refreshing my screen.
Sent from my Rezound using xda premium
You already answered this question, thread picked up steam quick.
Haha its funny how true this is
Sent from my ADR6350 using XDA App
dmeadows013 said:
Lol many things not working. No data, phone, texts, external storage, bluetooth, sound, camera to name a few... Looks like most other things work though...
Click to expand...
Click to collapse
Whats left... The calculator ? XD just kidding bro great job! Can't wait til the bugs get ironed out and i can use this daily!
sent from a newly unlocked and ROMd Rezound!
Omfg... I just crapped my pants.
dmeadows013 said:
Lol many things not working. No data, phone, texts, external storage, bluetooth, sound, camera to name a few... Looks like most other things work though...
Click to expand...
Click to collapse
Make sure you put that in the OP or all hell will break loose, lol
IM sure you got some tricks up your sleeve that will help you get this work 100%
Good job dude!
agentofchaos said:
Whats left... The calculator ? XD just kidding bro great job! Can't wait til the bugs get ironed out and i can use this daily!
sent from a newly unlocked and ROMd Rezound!
Click to expand...
Click to collapse
Yeah many issues are kernel related because this was built off the Sense kernel. When we get a strong AOSP kernel a lot of things will be fixed.
Without the help of Joelz9614 the phone would turn off as soon as you unplugged it
awesome cant wait
Omg!!! Ok, this might be worth leaving Ineffabilis for just a little bit. Gotta try this out for sure. Cannot wait!

[ROM][4.3][YP-G70]CyanogenMod 10.2 - M1 Release

CyanogenMod is a free, community built, aftermarket firmware distribution of Android 4.3 (Jelly Bean), which is designed to increase performance and reliability over stock Android for your device.
Code:
#include <std_disclaimer.h>
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
CyanogenMod is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. Linked below is a package that has come from another Android project that restore the Google parts. CyanogenMod does still include various hardware-specific code, which is also slowly being open-sourced anyway.
All the source code for CyanogenMod is available in the CyanogenMod Github repo. And if you would like to contribute to CyanogenMod, please visit out Gerrit Code Review. You can also view the Changelog for a full list of changes & features.
Hey guys, so after a few days of work, ive gotten a build of cm-10.2 booted. Please keep in mind that this is a WIP and there may be some things broken.
Whats changed from 4.2?
http://www.funkyandroid.com/aosp-JDQ39-JSS15J.html
Click to expand...
Click to collapse
Whats working?
Touchscreen
Wifi
Bluetooth
GPS
Storage
Recovery
FM Radio
Click to expand...
Click to collapse
Whats not working?
Back facing camera. Panorama mode does work, however.
Click to expand...
Click to collapse
Source
Device: https://github.com/iurnait/android_device_samsung_venturi/
Kernel: https://github.com/iurnait/android_kernel_samsung_venturi/
Click to expand...
Click to collapse
Thanks to:
@android1234567
@JackpotClavin
@Mevordel
@zaclimon
Installation instructions:
Please note that if you are on a GB rom and you get a status 7 assert error when trying to flash this rom, first flash a cm9 rom, power off the device, and boot into recovery again.
Click to expand...
Click to collapse
Download rom and gapps (and us kernel zip if necessary)
reboot into recovery
MAKE A BACKUP
wipe data, cache, dalvik cache
under mounts and storage, wipe /system and /system_app
flash rom
flash gapps
(flash us kernel zip)
reboot and enjoy
If you are updating from a previous build of cm-10.2, please wipe cache and dalvik
Downloads
Current recommended build (M1 Snapshot)
ROM: cm-10.2-20131105-UNOFFICIAL-venturi.zip - 155.03 MB
US Kernel: pac_venturiusa_kernel-nov4.zip - 5.26 MB
Gapps: http://d-h.st/users/ZordanKV/?fld_id=22749#files
Click to expand...
Click to collapse
Previous version
Rom:cm-10.2-20130911-UNOFFICIAL-venturi.zip - 167.52 MB
Gapps: http://forum.xda-developers.com/showthread.php?t=2012857
US Kernel: cm-10.2-USA-Kernel-REV3.zip - 5.09 MB
Click to expand...
Click to collapse
Check out my github in the device folder, I've got the storage working with some fstab magic
Sent from my DROID RAZR M using xda app-developers app
This is is destined for epic-icity. :laugh:
I always chuckle when I see this- * you point the finger at me for messing up your device, I will laugh at you.
JackpotClavin said:
Check out my github in the device folder, I've got the storage working with some fstab magic
Sent from my DROID RAZR M using xda app-developers app
Click to expand...
Click to collapse
I wish I could give you over 9000 thanks.
You is awesome
That didn't take long.
Build uploaded. This includes the INTL kernel; a US kernel is building right now. AFAIK, this rom currently wont work with other custom kernels. check second post for flashing instructions and keep in mind that this is a beta build, so things may go wrong.
Everything seems okay, I just cant get root access
An1mus said:
Everything seems okay, I just cant get root access
Click to expand...
Click to collapse
Issue is addressed in the OP. Use SuperSU.
Sent from my YP-G70 using Tapatalk 4 Beta
iurnait said:
Issue is addressed in the OP. Use SuperSU.
Sent from my YP-G70 using Tapatalk 4 Beta
Click to expand...
Click to collapse
Hmm it's telling me that the binary failed to ,so still no SU
I'll just wait I guess
An1mus said:
Hmm it's telling me that the binary failed to ,so still no SU
I'll just wait I guess
Click to expand...
Click to collapse
flash this: http://download.chainfire.eu/supersu
Ive uploaded a new build that should fix superuser and has a few more changes from Mevordel that I had forgotten to merge. Ive also changed the link to the gapps package to a more comprehensive zip, so it is best to do a full wipe if coming from the build earlier today to avoid duplicate apps showing up.
ROM:
http://d-h.st/38D
GAPPS:
gapps-jb-20130729.zip - 80.91 MB
US Kernel (new version):
check op
Can't wait to flash this ROM!
Sent from my YP-G70 using xda app-developers app
iurnait said:
Ive uploaded a new build that should fix superuser and has a few more changes from Mevordel that I had forgotten to merge. Ive also changed the link to the gapps package to a more comprehensive zip, so it is best to do a full wipe if coming from the build earlier today to avoid duplicate apps showing up.
ROM:
http://d-h.st/38D
GAPPS:
gapps-jb-20130729.zip - 80.91 MB
US Kernel (new version):
uploading
Click to expand...
Click to collapse
And there go our chances of getting rid of the extra partition hack by using a smaller gapps package
Sent from my Galaxy Nexus
The ROM boots up fine. Scrolling and going into the app drawer has a huge drop in frame. Doesn't matter if it's trebuchet or Nova, still very laggy when scrolling. Other than, the ROM is great
Great job getting 4.3 to work Keep up the good work!
I noticed that scrolling in general on the web browser, Facebook,etc has a drop in frames.
sultan kernel
can i flash the sultan kernel?
angelos208 said:
can i flash the sultan kernel?
Click to expand...
Click to collapse
No. Wait for r6 of his kernel.
iurnait said:
No. Wait for r6 of his kernel.
Click to expand...
Click to collapse
ok man thanks! tou rock! im your bigest fan!
Hmm, any kernel repo with commits I should add to the kernel to boot it on 4.3?
4.3 probably changes nothing here on yp-g70 but still I would like to test it
Wysłane z mojego Nexus S za pomocą Tapatalk 4

[ROM][5.0.2][Lollipop][Official] NamelessROM 2.0 [ALPHA] [20141228][Blazing Fast]

What is NamelessROM?
NamelessROM Gerrit Review
What is NamelessROM ?
Simple - NamelessROM is opportunity.
An opportunity to have a voice to the development team of the after-market firmware that you run on your device.
The main goal of NamelessROM is to provide quality development for android devices, phones and tablets alike.
NamelessROM developers are available nearly 24/7 and respond to bug reports and feature requests almost instantly.
This availability will allow you, the end-user, to have direct input into exactly what features and functions are included on the firmware that YOU run.
NamelessROM maintains features and functions of several well-known open-source, AOSP-based ROMs, as well as many features of our own.
Visit our website for more detailed information.
NamelessROM = endless possibilities. Unless you have an iPhone, then you're out of luck.
Click to expand...
Click to collapse
ANNOUNCEMENT: We are looking for Device Maintainers to expand our support, please visit our IRC channel or PM @Evisceration, or @jumoog @dhiru1602 for information.
Disclaimer
#include <std_disclaimer.h>
*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you. Hard. A lot.
*/
Click to expand...
Click to collapse
Working:
Everything (including hardware composer)
Click to expand...
Click to collapse
Got a bug report? Want to request a feature? Need extended support?
https://nameless-rom.org/
https://plus.google.com/communities/111682533298374492637
https://jira.nameless-rom.org/
Click to expand...
Click to collapse
Installation Instructions
FROM OTHER ROMS
Factory Reset/Wipe Data
Format System
Format Dalvik Cache
Install ROM
Install Gapps
Reboot
Profit
UPDATE FROM NamelessROM TO NEWER RELEASE
Just download the zip and flash it. You will NOT need to wipe anything.
Optionally you can also use our own OTA Updater
Click to expand...
Click to collapse
Contributions and Credit
Android/Google/AOSP
AOKP
AOSPA
CyanogenMod
OmniROM
SlimROMs
ALL OF OUR AWESOME TESTERS
Click to expand...
Click to collapse
Downloads
Rom:
https://mega.co.nz/#!Mc0U0ShL!uF6i1NsYJbthAROkZeE0GmLcx8waHdLAtI3UHitdag0
Gapps for 5.0:
https://s.basketbuild.com/gapps
Gapps mirror:
https://mega.co.nz/#!5R0D1B4L!1zP2aiDzlBAQ05I4UkgTNaVVLQME9Yjj1Fl7nwAPzs0
Click to expand...
Click to collapse
​
Reserved. Just in case...
wow cool,,, im trying to compile cm12, not booting, stays on cm bootanimation, maybe we could work together with @infrag too to get this awesome device up-to-date
Can you get me a logcat? Then I'll try to fix it in the evening
Edit: now I think you are talking about your build for i9305, not mine. Please clarify
im trying to do adb shell cat /proc/last_kmsg > kmsg.txt
but it says device not autherised,, im acutally building for both devices
Any particular gapps package we need to install?
i think PA has a gapps package for 5.0...... somewhere lol
---------- Post added at 09:41 PM ---------- Previous post was at 09:38 PM ----------
sawdoctor said:
Any particular gapps package we need to install?
Click to expand...
Click to collapse
does it bootup @sawdoctor
sawdoctor said:
Any particular gapps package we need to install?
Click to expand...
Click to collapse
I used these on my HTC http://forum.xda-developers.com/showthread.php?p=56810851
Sent from my GT-N7105 using XDA Free mobile app
winxuser said:
im trying to do adb shell cat /proc/last_kmsg > kmsg.txt
but it says device not autherised,, im acutally building for both devices
Click to expand...
Click to collapse
I still don't know if you are talking about mine build, or yours.
If you are talking about yours, try replacing adb binary with insecure one
DerTeufel1980 said:
I still don't know if you are talking about mine build, or yours.
If you are talking about yours, try replacing adb binary with insecure one
Click to expand...
Click to collapse
sorry yeah im talking about mine lol,
winxuser said:
i think PA has a gapps package for 5.0...... somewhere lol
---------- Post added at 09:41 PM ---------- Previous post was at 09:38 PM ----------
does it bootup @sawdoctor
Click to expand...
Click to collapse
Flashed it without gaps to see if it boots and stuck on the devil splash screen. Going to try a battery pull see if it helps
sawdoctor said:
Flashed it without gaps to see if it boots and stuck on the devil splash screen. Going to try a battery pull see if it helps
Click to expand...
Click to collapse
doesnt help i tried with my s3 lte with my compiled cm12 and it didnt do anything
sawdoctor said:
Flashed it without gaps to see if it boots and stuck on the devil splash screen. Going to try a battery pull see if it helps
Click to expand...
Click to collapse
Still not booting but when you press the screen the soft keys light up so there is some life there
sawdoctor said:
Flashed it without gaps to see if it boots and stuck on the devil splash screen. Going to try a battery pull see if it helps
Click to expand...
Click to collapse
Thanks. It's just sitting on devil logo forever?
I guess adb isn't working?
DerTeufel1980 said:
Thanks. It's just sitting on devil logo forever?
I guess adb isn't working?
Click to expand...
Click to collapse
i have the same with cm12 on i9305
I think I probably didn't disable selinux in kernel.... I'll upload a new build in about 6 to 7 ours.
DerTeufel1980 said:
I think I probably didn't disable selinux in kernel.... I'll upload a new build in about 6 to 7 ours.
Click to expand...
Click to collapse
haha just my thoughts just then,, i just changed the i9305 defconfig to disable selinux
mine might take a little longer to compile lol, ,i only use 4 cores out of 6 to compile,,
edit: btw which kernel sources are you using,, im using JustArchi's kernel sources, has lots of kernel fixes
DerTeufel1980 said:
Thanks. It's just sitting on devil logo forever?
I guess adb isn't working?
Click to expand...
Click to collapse
Didn't try adb sorry I wasn't at home to connect pc. I'll be home from work at 5pm UK time I'll glady test anything you want this evening and pull any logs you need
DerTeufel1980 said:
I think I probably didn't disable selinux in kernel.... I'll upload a new build in about 6 to 7 ours.
Click to expand...
Click to collapse
when you upload new build? thanks.
winxuser said:
haha just my thoughts just then,, i just changed the i9305 defconfig to disable selinux
mine might take a little longer to compile lol, ,i only use 4 cores out of 6 to compile,,
edit: btw which kernel sources are you using,, im using JustArchi's kernel sources, has lots of kernel fixes
Click to expand...
Click to collapse
I am using my kernel for building i9300, N7100 and t0lte. Never ported it to i9305 though.
sawdoctor said:
Didn't try adb sorry I wasn't at home to connect pc. I'll be home from work at 5pm UK time I'll glady test anything you want this evening and pull any logs you need
Click to expand...
Click to collapse
Thanks. If you'd have some time to try adb would be great. I'll start working on it again at about 6 pm German time [emoji1]

[ROM][HI6210SFT] Haky86's AOSP 7.1.2 for Huawei P8 Lite

Android is an open source software stack created for a wide array of devices with different form factors. The primary purposes of Android are to create an open software platform available for carriers, OEMs, and developers to make their innovative ideas a reality and to introduce a successful, real-world product that improves the mobile experience for users.
Code:
#include
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
Change Log:
29/05/2017:
Download the latest source.
Reset device tree developments.
Progress
Android system.
Audio: it was working great on 7.1.1, will investigate on the problem once get a stable marshmallow device tree to use for nougat then android o.
Display.
Bluetooth (Bluetooth Share fc is fixed).
Camera: sometime crash.
GPS.
Graphics: hwcomposer has been disabled.
NFC.
Sensors.
Storages.
Wifi
Source Code to make other roms
Device Tree: https://github.com/hak86/android_device_huawei_hi6210sft
Kernel GPLv2 compliant Kernel: https://github.com/hak86/android_kernel_huawei_hi6210sft
Click to expand...
Click to collapse
Downloads AOSP 7.0:
Gapps: click here.
ROM: click here.
Install ROOT:
Download the flashable from here.
Reboot to TWRP.
Click on Install.
Choose SR3-SuperSU-v2.79-SR3-20170114223742.
Confirm the action to start install.
Wait a few seconds until installation is done before reboot.
Your device should be rooted now.
Installation via TWRP:
Download the latest version.
Copy the rom into memory card.
Do a backup to your sdcard before flash the rom.
Click on Wipe.
Choose Cache, Dalvik, Data and System .
Slide the screen to wipe.
Click on Install.
Choose the rom you copy on sdcard.
Slide the screen to install.
Reboot, enjoy.
Contributors
@haky 86
Source Code: https://android.googlesource.com
ROM OS Version: 7.x.x Nougat
ROM Kernel: Linux 3.10.x
ROM Firmware Required: 5.0 or up
Version Information
Status: beta
Created 2017-01-01
Last Updated 2017-29-05
haky 86 said:
-snip-
Click to expand...
Click to collapse
Great! I'll probably test it tomorrow, but by then you might have received more feedback
Reserved
Will take a look to boot.img tomorrow and reduce blobs to the minimal one needed for graphics.
XePeleato said:
Great! I'll probably test it tomorrow, but by then you might have received more feedback
Click to expand...
Click to collapse
thanks bro, i did the fault to send the device under holidays.. but should be ready soon. :angel:
Hi haky i Will test it now so stay tuned now i will make up some adb stuff for logcat
Spineshankumb said:
Hi haky i Will test it now so stay tuned now i will make up some adb stuff for logcat
Click to expand...
Click to collapse
I hope to get worked
Ciao
haky 86 said:
I hope to get worked
Ciao
Click to expand...
Click to collapse
Basketbuild connection is low maybe if i can help u after download i will upload on my Drive folder for a better connection...10 minutes for finish and i'm on 100mbps
Hello mate. A question does not need a base eg the b052 to install it? Or there is no problem from any other version .. Greetings Happy New Year !!
@haky 86 in my case, i installed it on my 4X (che2-l03, hi6210sft), and it shows the logo (not bootanimation), then restarts itself on recovery/twrp
btw, i was using an P8 Lite rom, so i guess that isn't a problem (ALE-L21C432B568)
I don't know if i can do something more to help
Ok after a full wipe and flash the device automatically reboot it self into recovery mode :S
Whats working and whats not working?
Sent from my ALE-L21 using Tapatalk
daaasek said:
Whats working and whats not working?
Sent from my ALE-L21 using Tapatalk
Click to expand...
Click to collapse
We don't know.
The OP (Haky 86) can't test it because his phone is bricked, he is waiting to get it back from repair. He needs feedback from users.
Spineshankumb said:
Ok after a full wipe and flash the device automatically reboot it self into recovery mode :S
Click to expand...
Click to collapse
That's mean it's a selinux issue, I will check cm-14.1 tree configuration and re-upload only boot image.
Spineshankumb said:
Ok after a full wipe and flash the device automatically reboot it self into recovery mode :S
Click to expand...
Click to collapse
Same for me, after wipe and flash it reboot into recovery.
haky 86 said:
That's mean it's a selinux issue, I will check cm-14.1 tree configuration and re-upload only boot image.
Click to expand...
Click to collapse
I recommendyou to use my ESAL kernel, aosp-7.0 branch, it includes the SeLinux patches.
what??? 02-02-2017
juanche007 said:
what??? 02-02-2017
Click to expand...
Click to collapse
It's my fault
panchovix said:
@haky 86 in my case, i installed it on my 4X (che2-l03, hi6210sft), and it shows the logo (not bootanimation), then restarts itself on recovery/twrp
btw, i was using an P8 Lite rom, so i guess that isn't a problem (ALE-L21C432B568)
I don't know if i can do something more to help
Click to expand...
Click to collapse
haky 86 said:
It's my fault
Click to expand...
Click to collapse
Hi @haky 86 is this the newest boot.img with selinux fixed?
https://basketbuild.com/devs/haky86/HuaweiP8Lite/Roms/AOSP/7.1.1/boot
thank u for ur time i'm ready with log cat cause we need to fix more than boot
Spineshankumb said:
Hi @haky 86 is this the newest boot.img with selinux fixed?
https://basketbuild.com/devs/haky86/HuaweiP8Lite/Roms/AOSP/7.1.1/boot
thank u for ur time i'm ready with log cat cause we need to fix more than boot
Click to expand...
Click to collapse
Even with new boot.img device reboots in recovery for me, did you get it working?
Lemon476 said:
Even with new boot.img device reboots in recovery for me, did you get it working?
Click to expand...
Click to collapse
i was making a backup of my current clean ROM so now i will try but i think the error is still the same. Have u flashed using option in TWRP flash img or have u putted it using adb?

Categories

Resources