Hello There
For those who don't know what this, boot loop, is when after boot up image (Samsung galaxy ace s 5830 bla bla bla ... ) the phone stucks at the boot animation and it doesn't pass from there ... and keeps on showing it time after time over and over again endlessy until you pull your bat off.
This can happen for a many reasons most know are:
- When you try to change the boot animation on a stock samsung rom ( which was my case )
- When you trade rom, and some apps are left behind ande generate a conflict.
If you are in this situation dont pass out! its only a soft bick and its reversable!
You have only two solutions!
1 - Remove bat. whait a bit, put it back again, start your ace in recovery mode ( power + center button )
- Choose the option factory reset, and Wipe cache (This will clean all Your Data) and that ... should do it ... if like me after this process everything is good but you have no boot animation just undo what you've done to set the new boot animation and it should be good!
2 - If step one had no result's there is only one option left ... Install a new rom (stock or custom )
If you dont know how to do, it i'll leave a link to use odin tuturial and install custom rom tuturial
http://forum.xda-developers.com/showthread.php?t=810130 (Odin for stock roms)
http://forum.xda-developers.com/showthread.php?t=645253 (CWM for Custom Rom)
Tuturials or made by another members of this great comunity
You can find stock roms for your ace at sammobile.com.
this is all!
cumps
any question just ask and i will try to answer as soon as possible
Galaxy Ace 2.3.6 Using:
Stock 2.3.6
PDA: S5830XWKT6
PHONE: S5830XWKT3
CSC: S5830OXXKT3
Related
Hi there..
Just want to ask, last time My P7500 (10.1/3G) is REPAIRED (Replace LCD & Mainboard) @ Samsung Service Center before that i use a few custom kernel plus install CWM but after REPAIRED i saw somethng strange on "Samsung Galaxy Tab Boot Logo" the something like a KEY @ @ the bottom "Samsung Galaxy Tab Boot Logo" at first i think it's normal cause i doesn't to root or isntall cutom rom yet but when the time i want to root or even install CWM the progress is OK but when i ENTERING CWM menu the screen suddenly is RUNNING UP SIDE DOWN so FAST so i cannot see the screen normaly but i still try to root & install custom rom on my Gtab & DONE...!! but when it's Boot the screen is far than normal it split into two screen & sometimes it running up side down again like on CWM menu does anyone know what happen to my Gtab P7500...?? is it cause My Bootloader is Locked by Samsung & how to Unlock it cause i cannot ask "them" about this condition cause it happen just when i try to root & install custom rom and when entering cwm menu but when i flash official rom from random release ALL is BACK to NORMAL & nothing stange happen to my P7500
Please advise..
Regard's
soomat said:
Hi there..
Just want to ask, last time My P7500 (10.1/3G) is REPAIRED (Replace LCD & Mainboard) @ Samsung Service Center before that i use a few custom kernel plus install CWM but after REPAIRED i saw somethng strange on "Samsung Galaxy Tab Boot Logo" the something like a KEY @ @ the bottom "Samsung Galaxy Tab Boot Logo" at first i think it's normal cause i doesn't to root or isntall cutom rom yet but when the time i want to root or even install CWM the progress is OK but when i ENTERING CWM menu the screen suddenly is RUNNING UP SIDE DOWN so FAST so i cannot see the screen normaly but i still try to root & install custom rom on my Gtab & DONE...!! but when it's Boot the screen is far than normal it split into two screen & sometimes it running up side down again like on CWM menu does anyone know what happen to my Gtab P7500...?? is it cause My Bootloader is Locked by Samsung & how to Unlock it cause i cannot ask "them" about this condition cause it happen just when i try to root & install custom rom and when entering cwm menu but when i flash official rom from random release ALL is BACK to NORMAL & nothing stange happen to my P7500
Please advise..
Regard's
Click to expand...
Click to collapse
Anyone can help me about this...??
cause right now i still cannot do anything with my p7500 ..
Thanks
Have you tried this?
http://forum.xda-developers.com/showthread.php?t=1555984
Sent from my GT-N7000 using Tapatalk 2
Hello everybody,
I have been digging around for a solution but nothing, the symptoms of flashing an incorrect boot image as stated on GALAXY s3 TOOLKIT (restarting in loop mode / stuck on boot logo sometimes and surely Bluetooth is not functioning). I flashed JB 4.1.2 but nothing, cland and wipd dalvik an cache from boot mods and then tried JB 4.1.1 again an finally ICS 4.0.4 ... all gave th same result...
do i need to repartition the handset and do a new flash via Odin ?
is there any solution ?
Please help me further
Best Regardds
Hi,
I'm really a noob, I was searching a few hours for a solution but I didn't find that. So...
I got my GT-P1010 from my friend, there was 2.3.6 with some addons like jelly bean keyboard, animations from this software, and some my friends apps, so I decided to make a factory reset to delete those addons (I thought that tab with it is getting slooow), I had read about factory reset from CWM menu (my tab has that) so I made it. After that I made a reboot and my tab stucks in animation with triangles.
I had read that I must put my device into a download mode and install new rom with Odin. but in every tutorial there is a yellow box in odin after plug in device, my colour is light blue. Kies can't connect too (connecting.... with no end)
I want to have original clean firmware 2.3.6 on my device, I dont need "hacking" apps like that, no non-official addons etc after all.
in summary I have CMW recovery menu (if it's required) and I can use that, windows 8 is on my laptop.
Please help me, i need that tab as soon as possible.
greetings!
P.S. i cant find firmware for my tab, every link is on hotfile and dead.
Hi All,
This is the first time I ever tried to install CWM in order to install Lollipop in my Samsung Galaxy Note 1 (N7000) [India]. I flashed ROM "T210.CWM.6.0.4.5.recovery.tar" (attached with thread) using Odin. Uncheked Auto-Reboot option. When I re-started my mobile it shows Samsung Galaxy Note N7000 in startup screen with exclamaion (warning) symbol on startup. After a couple of seconds I can see only horizontal lines and phone shuts down. I see battery charging screen for a second and then device get shutdown. Now Odin cannot detect it and ADB sometimes shows it as offline. Is there any way to fix this problem? Please reply asap. Thanks in advance.
Warm Regards
You need to boot into recovery and flash the ROM from TWRP
Most stock Samsung ROMs dont support custom recovery
Chuck the ROM and the other things you want (Gapps, SuperSU) but make sure they are the right ones for the device and then put them on an external sd card and insert it, there are plenty of tutorials on flashing too
I noticed that the recovery you linked is for a T210, by my knowledge thats for a Galaxy Tab 3 7.0? Which i have running NoleKat 4.4 btw
If it is for another device than yours then its not great news.
Sent from my iPod touch 5 using Tapatalk
As P_Wheeler said, your recovery file is for a different phone , this will create unstable systems / bootloops / errors.... F
irstly make sure you can get your phone back to stock, then flash the right recovery tru ODIN, and install your ROM in recovery...
My problem: samsung galaxy s2 gt i1900, rooted for the first time yesterday by someone not so experienced (me). After rooting, it worked well until I did a factory reset from phone menu. After that, it got stucked on boot, samsung logo with the yellow triangle. It only works now in download mode - I cannot acces the reset/recovery menu - it restarts over and over. Odin recognizes the phone.
I have read many threads here , but I didn`t find a real step by step solution. Could be my fault. Anyway, I need your kind help before making another wrong move.
From what I understood so far, I could download the original firmware from : www.sammobile.com, then Download mode - Odin - PDA - load the original firmware - start. If this is right, I have a few questions:
1. In odin what options must be un / checked?
2. After this step (if I`m right so far) can I still root the phone after fixing the problem? If so, please recommend me a safe firmware. Or if it`s possible to load directly a custom rom (not the original one but a safe, working one), please tell me (link).
If I`m wrong so far please teach me how to fix this frustrating issue.
Please excuse my english and thank you.
ania_90 said:
My problem: samsung galaxy s2 gt i1900, rooted for the first time yesterday by someone not so experienced (me). After rooting, it worked well until I did a factory reset from phone menu. After that, it got stucked on boot, samsung logo with the yellow triangle. It only works now in download mode - I cannot acces the reset/recovery menu - it restarts over and over. Odin recognizes the phone.
I have read many threads here , but I didn`t find a real step by step solution. Could be my fault. Anyway, I need your kind help before making another wrong move.
From what I understood so far, I could download the original firmware from : www.sammobile.com, then Download mode - Odin - PDA - load the original firmware - start. If this is right, I have a few questions:
1. In odin what options must be un / checked?
2. After this step (if I`m right so far) can I still root the phone after fixing the problem? If so, please recommend me a safe firmware. Or if it`s possible to load directly a custom rom (not the original one but a safe, working one), please tell me (link).
If I`m wrong so far please teach me how to fix this frustrating issue.
Please excuse my english and thank you.
Click to expand...
Click to collapse
Hi,
Follow this guide as it is to make your phone in working condition.
http://www.ibtimes.co.uk/samsung-galaxys2-i9100-unroot-official-jellybean-firmware-460777
After this step, you can root your phone anytime, and even try custom ROMs on your i9100.
Regards.