Can someone please help me.
I am trying to port a rom over to my devices but everything I try flashing I get
E:error in /sdcard/cm7.zip
(Status 0)
Installation aborted.
I think it may have something to do with the update-script or update-binary?
I tried changing out the whole META-INF folder and replaced it with my update.zip and the rom flashed successfully, but when I rebooted it went right back into clockworkmod? This is really frustration!
If anyone could help I would greatly appropriate it.
Thanks and God Bless!
Related
I am new to the flashing rom thing.
Well what happened was....I thought was flashing the viper rom, and I had to use my recovery to unscrew what I didy. Can someone give a short tutorial on flashing roms? I am not a complete **** nugget btw haha.
I loaded the zip file on my SDcard and used the TWRP to flash from zip. Was that wrong?
install error with teamwin recovery.
e:error in /tmp/sideload/package.zip
(status 1)
That is what i got. I read that binary thing was not the updated.
Hey guys. So I tried flashing the HC 3.1 stock package from the LOOK HERE FIRST thread, but it keeps giving me a status 7 aborted error. Not sure why. I was on StarBurst KME and I installed that after an OTA to KME. Can anyone help me flash this to stock? Gotta exchange it, can't risk anything!
heres what i did:
if this is the error you are getting:
assert failed: getprop("ro.bootloader") == "P7100BUKB7"
E:Error in sdcard/hc-3.1_ota-full_sam_tab_10.1.zip
(Status 7)
Installation aborted.
do the following:
first thing, i re-rooted my tab.(following the directions in the LOOK HERE POST)
once re-rooted, i flashed the hc-3.1_ota-full_sam_tab_10.1.zip
then i did used ODIN to flash the stockrecovery file. (everything you need is ont the files for dummies zip
on the tab re-booted, it was stuck in a bootloop.
so i got back into recovery and did a factory/data reset/wipe.
tab rebooted and everything is working fine. back on stock.
hope this helps.
happyhourtx said:
heres what i did:
if this is the error you are getting:
assert failed: getprop("ro.bootloader") == "P7100BUKB7"
E:Error in sdcard/hc-3.1_ota-full_sam_tab_10.1.zip
(Status 7)
Installation aborted.
do the following:
first thing, i re-rooted my tab.(following the directions in the LOOK HERE POST)
once re-rooted, i flashed the hc-3.1_ota-full_sam_tab_10.1.zip
then i did used ODIN to flash the stockrecovery file. (everything you need is ont the files for dummies zip
on the tab re-booted, it was stuck in a bootloop.
so i got back into recovery and did a factory/data reset/wipe.
tab rebooted and everything is working fine. back on stock.
hope this helps.
Click to expand...
Click to collapse
I have one question. Will I get a triangle like on the Galaxy SII? It has the same warning as the SII before going into download mode AND a counter.
Haloruler64 said:
I have one question. Will I get a triangle like on the Galaxy SII? It has the same warning as the SII before going into download mode AND a counter.
Click to expand...
Click to collapse
It didn't, my bad. Thanks for the help, trying now!
happyhourtx said:
heres what i did:
If this is the error you are getting:
assert failed: Getprop("ro.bootloader") == "p7100bukb7"
e:error in sdcard/hc-3.1_ota-full_sam_tab_10.1.zip
(status 7)
installation aborted.
do the following:
first thing, i re-rooted my tab.(following the directions in the look here post)
once re-rooted, i flashed the hc-3.1_ota-full_sam_tab_10.1.zip
then i did used odin to flash the stockrecovery file. (everything you need is ont the files for dummies zip
on the tab re-booted, it was stuck in a bootloop.
So i got back into recovery and did a factory/data reset/wipe.
Tab rebooted and everything is working fine. Back on stock.
hope this helps.
Click to expand...
Click to collapse
stock is flashing! Thank you so much!!!
Im trying to flash Cool ICS v5 and when it gets to Installing SYSTEM Partition I get an error E:Error in /tmp/sideload/package.zip (status 0) does anyone have any ideas on how to get around this? I would really like to use this rom. I unlocked the bootloader using HTC unlock and then i flashed the boot.img included in Cool-ICS-v5-EvoC.zip.
error in /tmp/sideload/package.zip status 0
Help some 1 walk me through this mess. Matts download is taking 10 hours to download. Is there an external link I can use>?
n30r3b3l said:
Im trying to flash Cool ICS v5 and when it gets to Installing SYSTEM Partition I get an error E:Error in /tmp/sideload/package.zip (status 0) does anyone have any ideas on how to get around this? I would really like to use this rom. I unlocked the bootloader using HTC unlock and then i flashed the boot.img included in Cool-ICS-v5-EvoC.zip.
Click to expand...
Click to collapse
you have two options...one is redownload the zip file from a different site or open up the one you have and manually delete that zip file from there and it should bypass and continue on... what it ma do to the rom is on you ... if you extract the package.zip and then open it youll see what files the zip contains...if it contains no files it is likely corrupt and need to download a new rom...what site did you download the ROM from and are you a cdma or gsm model phone?
see im having the same problem i tried the [Cool Sense] Rom and the ZR3D-XL SENSE Rom and TeamGenesisRom3d and it all gave me the Error in /tmp/sideload/package.zip (status 0) so i had to install my old rom back MikVirgin Rom. Can it be because im still using twrp recovery and not 4EXT Recovery Control
ishsed said:
see im having the same problem i tried the [Cool Sense] Rom and the ZR3D-XL SENSE Rom and TeamGenesisRom3d and it all gave me the Error in /tmp/sideload/package.zip (status 0) so i had to install my old rom back MikVirgin Rom. Can it be because im still using twrp recovery and not 4EXT Recovery Control
Click to expand...
Click to collapse
I've noticed all the people who get that error are using twrp. So I recommend using 4ext.
Read, Search, Read again, ... Then Ask with Tapatalk 2
Need help getting this tablet back to factory stock.
Current Tablet State:
I get get to recovery (CWM v6.0.3.6) and install zips, but the only ROM that it will boot into is cm-10.1-20131020-NIGHTLY-p4vzw.zip... which is a verizon build. Seems like any other version of CWM causes a looping screen.
I can get to downloading mode and use Odin. Only file that works here with cm-10.1-20131020-NIGHTLY-p4vzw.zip is this file here -> PDA_SIGNED_P7105.tar.md5. With this combo I can actually boot into cm and I have wifi, but it's not what I am looking for here.
I get invalid binaries on the modem.bin or lte_modem.bin when using Odin if I try using any other PDA file. I can't find the U.S. Cellular version of the firmware anywhere on the internet.
if I try an install hc-3.1_ota-full_sam_tab_10.1.zip from recovery I get this error:
assert failed: getprop("ro.bootloader") == "p7100BUKB7"
E:Error in /tmp/update.zip
(status 7)
Installation aborted.
I have tried about every single method on these forums and am unable to get this thing back to stock. Any help would be much appreciated. And whomever helps me fix it will be rewarded with some bitcoins
Hey guys.
So, I need some help here... I am trying to flash the PPX Stock V3 rom for Galaxy S3 but I always get the (status 7) error. I tried with another roms and it is the same problem. But I got to flash the ones with aroma installer and it works fine, but I want exactly this PPX Stock rom... I was using the Clockwordmod Touch Recovery and it wasn't working (getting this error) and I've changed to PhilZ Touch and it the problem continues...
Do you have some ideas on what to do?
So, thanks to all.
[EDIT]~
By the way, the problem starts in this line while flashing the .zip
Pure Performance X Firmware
Installing System...
Simlinking...
set_perm: some changes failed
E: Error in /storage/sdcard1/[ROM~[XXUGNA7][4.3.1] PPX Stock V3.zip
(Status 7)
Installation aborted.
vncsalencar said:
Hey guys.
So, I need some help here... I am trying to flash the PPX Stock V3 rom for Galaxy S3 but I always get the (status 7) error. I tried with another roms and it is the same problem. But I got to flash the ones with aroma installer and it works fine, but I want exactly this PPX Stock rom... I was using the Clockwordmod Touch Recovery and it wasn't working (getting this error) and I've changed to PhilZ Touch and it the problem continues...
Do you have some ideas on what to do?
So, thanks to all.
[EDIT]~
By the way, the problem starts in this line while flashing the .zip
Pure Performance X Firmware
Installing System...
Simlinking...
set_perm: some changes failed
E: Error in /storage/sdcard1/[ROM~[XXUGNA7][4.3.1] PPX Stock V3.zip
(Status 7)
Installation aborted.
Click to expand...
Click to collapse
Make sure u are using the latest version of cmw... Most of the status 7 fails have to do with this.
Sent from my GT-I9300 using xda app-developers app
I am using the most updated... and tried with other recoveries but no sign of progress. And I have read some threads with some possible solutions but still stuck... :/
vncsalencar said:
Hey guys.
So, I need some help here... I am trying to flash the PPX Stock V3 rom for Galaxy S3 but I always get the (status 7) error. I tried with another roms and it is the same problem. But I got to flash the ones with aroma installer and it works fine, but I want exactly this PPX Stock rom... I was using the Clockwordmod Touch Recovery and it wasn't working (getting this error) and I've changed to PhilZ Touch and it the problem continues...
Do you have some ideas on what to do?
So, thanks to all.
[EDIT]~
By the way, the problem starts in this line while flashing the .zip
Pure Performance X Firmware
Installing System...
Simlinking...
set_perm: some changes failed
E: Error in /storage/sdcard1/[ROM~[XXUGNA7][4.3.1] PPX Stock V3.zip
(Status 7)
Installation aborted.
Click to expand...
Click to collapse
Try reading the FAQ for philz recovery