Cracked Galaxy Ace Digitizer - Just a quick question :) - Galaxy Ace S5830 General

Hi,
I have dropped my Galaxy Ace and the digitizer cracked. I have found a replacement on ebay and was just wondering if I could just take the old digitizer off and slip the new one in, or would I need to stick something on the digitizer for it to stay on?
Thanks.

I think you just have to replace it...
Sent from my GT-S5830 using xda premium

bi think you just need to replace it O.O or just wayc from youtube. That saved 2 phones I have handled lol. but if your not rooted I really suggest usin warranty

Doo:DAce said:
bi think you just need to replace it O.O or just wayc from youtube. That saved 2 phones I have handled lol. but if your not rooted I really suggest usin warranty
Click to expand...
Click to collapse
You can't get the phone fixed under warranty since it was caused myself and not Samsung. The person who I purchased the digitizer from included a adhesive sticker just incase I needed it.

Related

Galaxy S3 huge crack

Hi! Unfortunately i dropped my phone and now it has huge cracks all over the screen. Do you think samsung covers for accidents like this?
Yes, ask them and you should get a new one, with a spare for next time you drop it too (saves on postage costs).
worlds85 said:
Hi! Unfortunately i dropped my phone and now it has huge cracks all over the screen. Do you think samsung covers for accidents like this?
Click to expand...
Click to collapse
Only if they are a very very stupid company .
You damaged you pay unless its covered by insurance of course .
jje
As above, insurance or repair as it was your own fault.
Screen replacement below.
http://www.youtube.com/watch?v=_70-W9JjVjg&feature=youtube_gdata_player
Sent from my GT-I9300 using xda premium
Thanks :/
Motogp1 said:
As above, insurance or repair as it was your own fault.
Screen replacement below.
http://www.youtube.com/watch?v=_70-W9JjVjg&feature=youtube_gdata_player
Sent from my GT-I9300 using xda premium
Click to expand...
Click to collapse

Digitizer Strangeness

Well, I'd resigned my fate to needing to replace my digitizer. Have a couple dead strips about 3/8 in wide, that go all the way across the screen. The first to appear is about 2/3 the way up, and the other near the bottom which came a week or so later. Soft keys work fine. Get crazy screen action periodically and freezes that can only be ended by screen off/unlock. Here is the strangeness though. Today the dead spots seemed to work, other than a hairline on either side of the dead spots. Noticed this when a city on my weather app loaded that was previously unaccessable (no rotation in app). Checked and confirmed dead spot anomaly with a multitouch utility. Anyway after a little use the full dead spots seem to be back. Any ideas as to what's up? Haven't heard of this happening. Could this be an indicator of a torn ribbon? Has anyone experienced this? Thanks.
Sent from my MB860 using xda app-developers app
Sent from my MB860 using xda app-developers app
You can flash PSDFIX or send your Atrix to service, cause propably it's hardware issue.
ovitz said:
You can flash PSDFIX or send your Atrix to service, cause propably it's hardware issue.
Click to expand...
Click to collapse
What is psdfix?
Sent from my MB860 using XDA Premium HD app
it's for digitizer, it can help with some issues
Thanks. Figured it was probably HW. No warranty. Will have to fix myself. Any pointers, warnings, advice, for success?
Sent from my MB860 using xda app-developers app
Hi to all, i've the same problem.
where can i get more information about this fix software for the the digitizer??? more information pls help!
I got the same Problem, about 3/10 of my touchscreen is ****ed up :/ is there a easy way to fix it (and ofc cheap way) ?
Thanks
Sent from my MB860 using xda app-developers app
Probably not. It's very likely a hardware failure, so it's kinda like asking how do you fix a burnt lightbulb.
Ironman1965 said:
Thanks. Figured it was probably HW. No warranty. Will have to fix myself. Any pointers, warnings, advice, for success?
Sent from my MB860 using xda app-developers app
Click to expand...
Click to collapse
http://www.youtube.com/watch?v=grqz-3LdIEk
Can somebody tell me what parts I need to buy, for repairing my Atrix at home? Has somebody experience in fixing this problem?
Sent from my MB860 using xda app-developers app
There are digitizers on ebay for a reasonable price. I just ordered one that comes with the digitizer, half a dozen tools and a precut adhesive to attach the new digitizer for about $60 us. Seems to be an all inclusive. Just search "atrix 4g digitizer" filter new and buyitnow an.d you'll find it no problem.
Sent from my MB860 using xda app-developers app
http://www.ebay.de/itm/OEM-Motorola...ultDomain_0&hash=item3ccaaa2112#ht_4500wt_952
Is this the right Item?
I just need the digitizer, right or do i need anything else?
Thanks
http://www.ebay.com/itm/300711342762
This is the one I bought. Has everything including tools. Need adhesive which is included in this auction.
Got My GS3 I9300 now so not using Atrix anymore (good thing too). Replaced digitizer myself and Atrix is like new. Not more than a couple days after the atrix repair was complete, my daughter got her 2 week old iphone stolen so I sent it to her to use. Some douchebag kid asked her to use her phone to call his mom and as soon as she gave it to him the [email protected]#!$%^ little piece of sh!t took off like the wind. Hope some day the little prick tries it on some olympic blackbelt with no conscience who then proceeds to slowly dismantles him piece by piece, or at least make his hands permanently unusable. Anyway the link I provided is a good source for atrix digitizers.
Thanks all and good luck!
Ironman1965 said:
Got My GS3 I9300 now so not using Atrix anymore (good thing too). Replaced digitizer myself and Atrix is like new. Not more than a couple days after the atrix repair was complete, my daughter got her 2 week old iphone stolen so I sent it to her to use. Some douchebag kid asked her to use her phone to call his mom and as soon as she gave it to him the [email protected]#!$%^ little piece of sh!t took off like the wind. Hope some day the little prick tries it on some olympic blackbelt with no conscience who then proceeds to slowly dismantles him piece by piece, or at least make his hands permanently unusable. Anyway the link I provided is a good source for atrix digitizers.
Thanks all and good luck!
Click to expand...
Click to collapse
Do you have some tips to share about digitizer replacing? does it need glue or some adhesive?
Thanks in advance. I want to do it but too scared that some screw or somewting will turn bad
Much appreciated
jhonnyx said:
Do you have some tips to share about digitizer replacing? does it need glue or some adhesive?
Thanks in advance. I want to do it but too scared that some screw or somewting will turn bad
Much appreciated
Click to expand...
Click to collapse
It's really simple. You only need adhesive (glue, double-sided tape) if you're getting just the digitizer, without the frame. I wouldn't advise that since it can get messy. Other than that, you only have to pay attention to the rather short and fragile flat cable that connects it to the motherboard. Just follow the disassembly videos carefully and don't be lazy to remove extra components like the screen, even if it seems unnecessary. It might make all the diference in the world.

Screen cracked(india)

Fell on floor.. got a big crack...
Can someone confirm what has happened..
I mean everything is working fine.. just there is crack on screen so perhaps only the glass above screen has cracked...
Can someone suggest what to do...
And someone from India what will the glass cost ???
Sent from my GT-I9100 using xda premium
Hi Pal!
The S2 glass will come with digitizer so you cant get the replacement glass alone. you have to get new Display which will come with glass. sorry pal...
here is the ebay link
and there is another option but i don't guarantee this DX.COM
once you got the replacement LCD follow this link for replacement
saurabh.2561 said:
Fell on floor.. got a big crack...
Can someone confirm what has happened..
I mean everything is working fine.. just there is crack on screen so perhaps only the glass above screen has cracked...
Can someone suggest what to do...
And someone from India what will the glass cost ???
Sent from my GT-I9100 using xda premium
Click to expand...
Click to collapse
hi, i can share your pain because the same thing happened to me few weeks back! but sadly they jus dont replace the glass alone as pointed out by #ssnalugu. I got it repaired at a private samsung servicing store, it costed me around rs 9,500, he replaced the whole lcd panel, everything fine now
A Samsung service centre told me it will cost 6500rs
I am thinking to use it as it is for few weeks then buy a new phone...
Sent from my GT-I9100 using xda premium

[Q] Best way to fix screen?

My drunk idiot self managed to completely smash my screen last night. Any suggestions as to the best way to replace it?
Sent from my SCH-I605 using xda app-developers app
You can replace it yourself, there are a few videos online however the lcd is very close to the glass screen. I tried doing it and was not too careful and ended up running the lcd. I replaced the screen on my note 10.1 so I was confident that I'd be able to do this one but it didn't work out as planned for me. I paid for the replacement through the insurance and sent back the broken one.
I just wrote you a note!

Replacement Phone question.

My S4 was dropped and the screen was cracked so I had it replaced. I was still have other issues with the phone. Has anyone here got a replacement phone and had there screen replaced? I just don't want to be billed $500 for so physical damage. The phone now only has a nick in the corner where is was dropped.
Thanks for any feedback!!
joe2018 said:
My S4 was dropped and the screen was cracked so I had it replaced. I was still have other issues with the phone. Has anyone here got a replacement phone and had there screen replaced? I just don't want to be billed $500 for so physical damage. The phone now only has a nick in the corner where is was dropped.
Thanks for any feedback!!
Click to expand...
Click to collapse
I got a replacement from Verizon and best of all it came with MDK for rooting and recovery.
Sent from my SCH-I545 using xda app-developers app
blackra1n said:
I got a replacement from Verizon and best of all it came with MDK for rooting and recovery.
Sent from my SCH-I545 using xda app-developers app
Click to expand...
Click to collapse
I know its easy to get a replacement I'm just worried about them saying I had physical damage. The screen is new but did have it repaired.
joe2018 said:
My S4 was dropped and the screen was cracked so I had it replaced. I was still have other issues with the phone. Has anyone here got a replacement phone and had there screen replaced? I just don't want to be billed $500 for so physical damage. The phone now only has a nick in the corner where is was dropped.
Thanks for any feedback!!
Click to expand...
Click to collapse
I had an S3 replaced through Sprint that had the screen replaced. I was having issues with the USB port but I felt the need to be honest and told them the screen had been replaced. They told me that 1) That should not have an affect on the USB port and 2) they seemed surprised that the screen had been replaced because they said it didn't look like it had been.
joe2018 said:
My S4 was dropped and the screen was cracked so I had it replaced. I was still have other issues with the phone. Has anyone here got a replacement phone and had there screen replaced? I just don't want to be billed $500 for so physical damage. The phone now only has a nick in the corner where is was dropped.
Thanks for any feedback!!
Click to expand...
Click to collapse
9.9 times out of 10 vzw either destroys phone or they ship back to Samsung...the later half being most used.
I assume you have no insurance?
Sent from my SCH-I545 using Tapatalk 2

Categories

Resources