Hi, after installing the Debian Package for the Webtop and some playing around with it I now no longer have the App Tray or any of the other system panels. It starts up with the mobile view and thats it.
Please help?
What exactly did you do to it?
Did you changed something on the startup file?
Did you installed the HDMI Mirror hacked files?
Please elaborate a bit more...
Sent from my Atrix using Tapatalk
Hi there,
Yes I made some modifications. After I got Debian on it I installed synaptic and from there the xfce4 desktop. From there i modified the start-oshwt2.sh file so it would load it up instead of the awm. That didnt work out as I wanted to.
Then I undid the modifcations to the startup file and rebooted and since then all is gone....
I am using a Dock and no HDMI hack. Also standard 2.2.2 software on a Int Atrix.
check to make sure phoneportal isn't broken.
Well, as you already discovered, it's not possible (as far as I know) to boot directly to Debian with that hack. For it to work, you have to use the webtop2sd method. Which I haven't been able to perform due to lack of microsd space.
Also, did you manage to fix apt dependencies? Did all go well with the apt dependency fix? (most people get in trouble on this step). There are some nice scripts already that do this. (sorry don't have the links handy at the moment).
Here's what I would do:
1. Check the start file to see if in fact changes where reverted to default.
2. Re-install Webtop through CWM (search Webtop-Joe.zip on the forums, that is the original Webtop) and start from scratch
3. If that fails too, then search and install through CWM webtop-mod_v1.zip
Good luck!
Rayan
Ok here is what happened:
1. I Checked the start file and it was all in default. But something was still holding back the load of the Webtop GUI.
2. I then found the post with the webtop-joe.zip and downloaded it and installed trough Tenfars CWM. When it was done I rebooted and now I am stuck with the following message:
Failed to boot 4
Starting RSD mode
I understand that this is some sort of soft brick but I have no clue what to do from here.
I recently bought a lapdock, and I've been fighting and moving through to try and get the mod to work, but now I've hit a dead end that I can't beat.
I'm on the latest "lite" version of the WetDream ROM and I'm using the webtop that was preinstalled with it. I've got a 2gb partition set up on webtop2sd. My problem is that I can't get LXterminal to launch. Webtop configurator successfully installed Synaptic; firefox and AWN manager work fine as well, but I am at a dead end without a terminal. I tried installing others from synaptic, but even the simplest one (xvt) had a single, unfulfilled dependency. I've tried everything that I know how to try, including multiple installs of the ROM and of Webtop2sd.
Can anyone lend a hand?
EDIT: I also tried flashing the webtop-mod from this thread: [WEBTOP] 2.3.4 webtop fixed image [CWM Install] V1 . It gives me the same problem with lxterminal.
(Note, I would have posted here but I don't have enough posts.)
Thanks.
Please excuse the double post; I'm not intentionally bumping my thread.
I have found a "solution." I'm in the process of repairing my webtop now. My situation seems to be very unique, but I'd like to document it in case anyone comes along and has it again.
The trick I used was completely external to my Atrix, though. Without a terminal, I couldn't access tar or bash, but I could run single commands by making a custom entry on the modified AWN. So, here we go.
For anyone who has tried repeatedly to use Webtop2sd but has always lacked terminal access, here's my method.
Requirements: Access to a linux system, rudimentary knowledge of the terminal, or any other method of mounting your webtop2sd partition on a system with access to tar and permission changing methods.
****WORKING Awn Manager in webtop
Download the Dependency fixing scripts.
Mount your Webtop2sd partition and manually extract the scripts to their location in /usr/share/WebTopScripts/
Boot your device to webtop and setup a custom entry in Awn Manager with the following command:
"sudo bash /usr/Share/WebTopScripts/fix-apt-get.sh" (This should work with most versions of the script; also, no quotes in the actual command.)
That was enough to get Lxterminal working and gives me access to all the other mod methods on the forum that assume you have access to a working terminal. It's not really very helpful for Windows or Mac users, but it's the only thing that I could manage.
Feel free to close the thread, mods.
You gotta make sure to install LXTerminal from the Webtop Configuration applet where you installed Synaptic.
Sometimes it refuses to install at first so you have to try several times until it budges.
Try closing and opening the configuration window until you see both synaptic and LXTerminal buttons greyed out.
Sent from my Atrix 4G using Tapatalk
I'm almost certain that it was installed before (it was marked as present in synaptic), but just refusing to launch.
However, I broke my webtop just before getting it how I wanted it, so when I have time to give it another try, I'll see if being a little more persistent with it this time will work.
EDIT: Wow, the next 2 times that I had to install webtop, lxterminal worked just fine. Now I just have to get the scripts to actually fix all the dependencies and not end up with a broken webtop after installing software.
Has anyone had any luck running webtop2SD on this rom?
Sent from my MB860 using xda premium
yes, you have to instal bussybox installer form Google Play Store, then you need to change permissions of busybox in/system/bin/
Open permissions and uncheck "Set GID" permission, save changes.
Specifically, BusyBox by JRummy16, thats the one I used and it worked without modifying permissions . Just download it, and install BusyBox
When i attempt to install busy box, i lose super user permissions??? I have to reflash to get SU back?
What info do i need to grab to help me, help you, help me? Lol
Sent from my MB860 using xda premium
johng75 said:
Has anyone had any luck running webtop2SD on this rom?
Sent from my MB860 using xda premium
Click to expand...
Click to collapse
I just set this up today and am a relative noob about such things. Rather than download busybox, I used the following advice from Milestonefail on Nottachtrix.com, and it worked fine.:
***Use Root Explorer. Go to /system/bin. Scroll down to busybox. Click "Mount R/W" in the top right corner. Long press busybox. Choose "Permissions." Uncheck "Set GID"
Then I followed the XDA guides to the letter, and it worked great, with the exception of a TZ error at the end that caused difficulty when installing a new desktop and openoffice package. Easily solvable with a search though.
Bottom line on Nottachtrix 1.3.1, webtop 2 SD works great.
which version of W2SD did you use? for me version 1.1.0 loades but never sees the sd-card to format and move the webtop to, and 2.0.1 fails to load...
johng75 said:
which version of W2SD did you use? for me version 1.1.0 loades but never sees the sd-card to format and move the webtop to, and 2.0.1 fails to load...
Click to expand...
Click to collapse
I've got the exact same problem, i followed the guide partitioned my sd card but the webtop2sd 1.1.0 never sees the card, the 2.0.1 also fail to load. Could someone please help us with that?
EDID:
I did what ovitz said and everything went fine, i am executing the script now.
I used 2.0.1, which FC'd until I set the permissions on the busybox file. I did not install the Jrummy version, but rather just tweaked the permissions as noted above. I am running Nottachtrix 1.3.1 and webtop 2.3.6. It seems that a lot of folks still get bound up at this point, and I am not well-versed enough to know why that would be, but this worked for me.
Thanks, I reinstalled busybox and now webtop2sd is working. I didn't use any busybox installer.
Sent from my MB860 using XDA
ok, i installed the JRummy16 busybox and changed the premissions, i was then able to run version 2.0.1 of webtop2sd it finished
ran into issues running webtop config from the webtop, busybox was missing from /system/etc/webtop2sd folder so i added it there too and it ran fine...
after installing LXterminal i ran the webtop scripts
(http://forum.xda-developers.com/showthread.php?t=1192488)
then i added XFCE interface to replace default webtop
(http://forum.xda-developers.com/showthread.php?t=1420376)
last change really needed to install programs was to lock the 'tzdata' version in Package Manager
then edit the file to get rid of errors during installs
(http://forum.xda-developers.com/showthread.php?t=1420376)
all i can say is WOW, what a difference... thanx everyone... hopefully someone else that was missing steps like me can benefit from this...
Does anyone know how do I get lentras with accents on the laptop program in Openoffice? I refer to these accents á â â à é è ê õ and, is mainly and Ç. I really need the openoffice and, as my language (en) have these accents, the keyboard would have to have English-International (en-US) accentuating like any other en-US.
My system is usually accentuating the letters out of Openoffice, only Ç who did not enter.
Please help me ...
i have tried several times and i still get missing awn dock. I'm testing out gentop for a while.
Sent from my MB860 using XDA
el_venga said:
i have tried several times and i still get missing awn dock. I'm testing out gentop for a while.
Sent from my MB860 using XDA
Click to expand...
Click to collapse
I am having the exact same issue, how is gentop?
Edit: Fixed it, in your webtop2sd busybox set permissions to allow write from groups and others, then re-flash from webtop2sd app, reboot and see if that works.
webtop config not opening
Can anyone please point me in the right direction to fix this?
I have unchecked Set GID permissions in busybox and still webtop config will not load on lapdock. I have the awn manager and LXTerminal icons as well but they also do not load.
Nottachtrix 1.3.1
Webtop2sd 2.0.1
Faux 123 1.3 Ghz
32 GB w/ 10GB ext3 partition
edit: I have also tried through terminal emulator:
su
/usr/bin/sudo -H -u adas bash
export DISPLAY=:0
python /usr/local/bin/webtop-configurator.pyc
and I get
[sudo] password for adas:
again I am new to this so if anyone has any pointers as to some positive direction I can go to figure this out it would be most helpful and I will pray to the gods of linux that you receive many blessings
I also have a problem with webtop configurator. Webtop2sd installed everything successfully, but after the reboot when I click on the webtop configurator it does not starts. Just flashing for some seconds and that's all. Is there anybody who knows how to fix it?
International Atrix
Nottachtrix 1.3.1
Faux 1.0 GHz kernel
Webtop version: WT-1.2.0-110_OLY-6
In the terminal after these commands
su
/usr/bin/sudo -H -u adas bash
export DISPLAY=:0
python /usr/local/bin/webtop-configurator.pyc
I get this message:
Traceback (most recent call last):
File "./webtop-configurator.py", line475, in <module>
File "./webtop-configurator.py", line337, in _init_
AttributeError: 'module' object has no attribute 'Builder'
EDIT:
For me it is working now. I decided to go back to 2.3.4 webtop instead of fixed 2.3.6 webtop (fastboot erase webtop, install zip from CWM, install webtop2sd again) and now everything seems to be ok
I'm on the latest ics, is it possible for me to erase webtop 3.0 and put Ubuntu on it?
anyone know?
You don't need to erase webtop 3.0 because is not on webtop partition anylonger. Webtop partition is empty now. Full ubuntu will be possible when kholk release Kexec for ICS, then we will be able to run custom kernel on RAZR
Hi
Sorry I maybe missing something basic.
I wanted to be able to use Linux Ubunto on my Atrix 4g webtop
I installed webtop2sd according to your post http://forum.xda-developers.com/showthread.php?p=15109355#post15109355
I get my old webtop with the addition of 3 icons:
- Awn manager
- webtop configurator
- LXTerminal
I run the webtop configurator It says : Not implemented yet
I enter Administration and after I answer yes to update the APT sources list and a second question (that I don't remember exactly)
Then I successfully (I think) install LXTerminal (It runs a prompt : [email protected]:/data/home/adas$)
Then I install Synaptic , I can't tell if it works or not since I don't get any feedback.
As in your post [http://forum.xda-developers.com/showthread.php?t=1119557] I can tell you that I am booted from the SD card
However I do not see any means to get the GUI of ubunto
The only side issue is that now the webtop file manager can't access the sdcard-ext . In fact under sources does not display nothing more than Phone Images Phone Music Phone Video and Downloads.
However the SD is mounted and I can access it trough ESfile manager on the Mobile view
What I am missing, or what I need to do in order to get Linox Ubunto GUI ?
Thanks
Eli
No response on full ubuntu
elijacob said:
Hi
Sorry I maybe missing something basic.
I wanted to be able to use Linux Ubunto on my Atrix 4g webtop
I installed webtop2sd according to your post http://forum.xda-developers.com/showthread.php?p=15109355#post15109355
I get my old webtop with the addition of 3 icons:
- Awn manager
- webtop configurator
- LXTerminal
I run the webtop configurator It says : Not implemented yet
I enter Administration and after I answer yes to update the APT sources list and a second question (that I don't remember exactly)
Then I successfully (I think) install LXTerminal (It runs a prompt : [email protected]:/data/home/adas$)
Then I install Synaptic , I can't tell if it works or not since I don't get any feedback.
As in your post [http://forum.xda-developers.com/showthread.php?t=1119557] I can tell you that I am booted from the SD card
However I do not see any means to get the GUI of ubunto
The only side issue is that now the webtop file manager can't access the sdcard-ext . In fact under sources does not display nothing more than Phone Images Phone Music Phone Video and Downloads.
However the SD is mounted and I can access it trough ESfile manager on the Mobile view
What I am missing, or what I need to do in order to get Linox Ubunto GUI ?
Thanks
Eli
Click to expand...
Click to collapse
I found that I can run synaptic, but it warns me "without administrative privileges".
Also what I should do with the 24 broken packages?
If I mark them to re-install is needs to remove a lot (hundreds) of other packages. Should I agree?
Still no help
elijacob said:
I found that I can run synaptic, but it warns me "without administrative privileges".
Also what I should do with the 24 broken packages?
If I mark them to re-install is needs to remove a lot (hundreds) of other packages. Should I agree?
Click to expand...
Click to collapse
I corrected 23 broken packages using WebTopScropts-1.7 and the remaining one manually after running
sudo synaptic
What I need to do/install in order to get the clasic full ubunto desktop instead of the default webtop screan?