Related
Hi guys, i have little/big problem. I have bricked hermes, SPL 2.03, before with no radio message... when i try to flash some rom, it stucks and restart at 1%, when i try sd card flash, i get red 00062008 error, or 00028002 error. when i was trying official shipped rom, it seems good, until it was flashing radio part, then it stucks... so.. is possible to help? and, is possible to find some shipped rom without radio? KITL is not supported by the phone now... any solution please? even it i can use it as a pda only... thanks very much for quick replies
Do a search on here for a program called Rom Koch. You can pull the radio out of your stock rom. Then reflash and use as a PDA.
Cheers...
Yes, i tried it before, but without success, because if i modify original rom this way, herm doesn't recognize it as a stock rom, but as a cooked rom (even if i set the same cid as stock rom), and i get red error again... this does't work..
Hello all!
I am in desperate need of some help from you all, and the great rom chefs here.
What exactly happened:
From past 2-3 roms (pandora 1.0, 1.1, PDAVIET-v6,v7) i have been having regular MANILA freezes. it would freeze within 12 hours of flashing, and in the last 2 flashes, it froze within 1 hour, without me installing anything.
Titanium worked fine. untill that started hanging too.
So i tried reflashing the 1.6 official rom, thinking that might clear up some bugs as its the official rom.
while trying to flash it (from my sd card directly) it gave up an error - Invalid DEVICE.
I restarted and went into bootloader again, and then i started getting this error :
UPGRADE ROM CODE ERROR
PLEASE TRY AGAIN
Now i have tried reflashing from the computer, and also from the sd card directly, 1.6 official , pandora 1.1, pdaviet v7, but to no success.
All the time it still gets stuck on that screen.
I have tried hspl'ing it again, it was successful - the hspl procedure, but then still no rom loads onto it.
Even tried using the sspl, but still nothing happens. With SSPL, it shows flashing as 0%, and stays there forever!
PLEASE HELP guys!
in a real bad situation!
Thanks!
so what is the device status currently?
can u boot into a main manilla or titanium screen?
Can you get to bootloader? Were you flahsing ROMs using SSPL or HSPL?
hi..
i dont know if this might work, try to get stock rom, xxx.exe, rename xxx.exe to xxx.rar and unpack it. you should see RUU_signed.nbh and rename to leoimg.nbh. put leoimg.nbh in the root of your sd card. and flash use vol down+power button.
oh, there was a mistake!
When you firstly flashed your device with 1.6 official from sd card, this removed hspl and the device checked your rom's region id. I guess you have used offical roms from other areas. So the process stopped when the device checked the cid.
At this stage, you should find out the offical rom from your area, and re-flash it from sd card, then everything will be fine.
But you didn't, you tried re-hspl and sspl...and i don't know what the consequence will be.
So? Did you get it fixed mate?
Any update? if you haven't fixed it yet PM me.
If it is de wrong region rom you tried to flash do you might need to flash it with a goldcard?
hope you got it sorted
Just flash your original rom using htc ruu will do. been there, done that
yeah flash the 142 or 148 rom that is appropriate for your device.. and use teh exe/ruu that came with it rather than sdcard.
what's the betting you needed the goldcard to flash 161? which is why you're having issues trying to reflash it ?
HSPL
Hi,
You could try this,
1) flash HSPL first.
2) flash the stockrom one more time from storage card.
This will erase hardspl so if you want to flash custom roms again you need to flash HSPL one more time after you flashed the stockrom.
Succes,
Leo
I have the same problem and I need the official 1.42 rom... do u know where I can find it?
_JuSteR_ said:
I have the same problem and I need the official 1.42 rom... do u know where I can find it?
Click to expand...
Click to collapse
Link from Dutty:
http://rapidshare.com/users/258XUJ
Your Leo was probably locked on your operator
at this point You've got to flash HTC official ROM with a Golcard.
Or your operator's rom directly from bootloader.
yep. I'm actually trying to get a gold card...
I've tried to create a gold card and hard reset but the setup fail
00018003
LEOIMG.nbh - FAIL
RADIO_V2 - RSA FAIL
rcust -
bootloader -
splash1 -
os -
configdata -
Update terminate
Update FAIL
Click to expand...
Click to collapse
maybe is the gold card wrong?
_JuSteR_ said:
I've tried to create a gold card and hard reset but the setup fail
maybe is the gold card wrong?
Click to expand...
Click to collapse
Did you try flashing thru boatloader official Rom (from your region) ?
I tried to install the latest HTC official rom but the setup stops at 9%
"Error [290]: invalid command"
It seems a problem of Radio... not rom...
_JuSteR_ said:
I tried to install the latest HTC official rom but the setup stops at 9%
"Error [290]: invalid command"
It seems a problem of Radio... not rom...
Click to expand...
Click to collapse
You have to flash 1.43 of your Region thru boatloader. If boatloader does not work thru goldcard.
I tried with italian 1.43 official rom also but the setup keeps stopping... Tried also using a goldcard, created using qmat
Hi guys, hope you can help me.
I have a Hd2 and have flashed it with sspl and a custum rom etc. i managed this as the post in question gave a link to the flashing program, but the new version does not provide a link, so questions:
1) are flashing programs gneric? as in can i just replace the nbh file next to the flasher program and it will flash the new rom or is each flasher tied to the rom 9such as each one writes different data depending on the rom)
2) is the flashing program for a radio the same as the one for a rom? can i use a flasher program to flash a radio and the same one to flash a rom?
3) is the flasher for other HTC devices the same as the one for the HD2? i have an image file from a older HTC device, could i replace the nbh file in that with the one i want to flash and it works?
P.s. the rom i use is atemidis and i am interested in dutty`s new rom as the new artemdis has problems with things missing.
dutchtrance said:
Hi guys, hope you can help me.
I have a Hd2 and have flashed it with sspl and a custum rom etc. i managed this as the post in question gave a link to the flashing program, but the new version does not provide a link, so questions:
1) are flashing programs gneric? as in can i just replace the nbh file next to the flasher program and it will flash the new rom or is each flasher tied to the rom 9such as each one writes different data depending on the rom)
Click to expand...
Click to collapse
not sure, they may be, but why risk it since all(most)roms come with a customruu.exe anyway
2) is the flashing program for a radio the same as the one for a rom? can i use a flasher program to flash a radio and the same one to flash a rom?
Click to expand...
Click to collapse
yes, however you said you used sspl, , , sspl wont work for radios.
3) is the flasher for other HTC devices the same as the one for the HD2? i have an image file from a older HTC device, could i replace the nbh file in that with the one i want to flash and it works?
Click to expand...
Click to collapse
the nbh file is the actual ROM, if you flash a rom from a different phone, , well, just dont.
P.s. the rom i use is atemidis and i am interested in dutty`s new rom as the new artemdis has problems with things missing.
Click to expand...
Click to collapse
dutchtrance said:
1) are flashing programs gneric? as in can i just replace the nbh file next to the flasher program and it will flash the new rom or is each flasher tied to the rom 9such as each one writes different data depending on the rom)
Click to expand...
Click to collapse
As far as I know they are, as in you should be able to use any of them to flash any ROM onto the HD2 (I've done this plenty of times, though alot of times I will use the one that comes with the ROM). Note that not all of them are the same as some will perform task29 before flashing the ROM or another trick.
Thanks for the help thus far.
You've confirmed what i thought.
I installed the new spl-2.08.HSPL, then installed the recomended radio.
I`ve then flashed the athedies v28 gen 2 but it wont boot into windows, it just hangs at the red/orange screen with the big windows logo where it says its setting up the today screen.
I gather that i can flash a new image as i have the hspl, but how do i go about doing this as i cannot get an activ sync connection in windows to launch the flasher.
I assume i can hold down the down key to get into the HSPL menu and then flash from there some how? does this mean i have to do a flash from the memory card?
I have managed to flash by holding down the down key and getting into the 3 colours screen and then i can flash from there, but the thing still hangs at the red/orange screen. think its the rom
I have a standard HTC HD2 I want to flash.I am upto date with the official updates.Everytime I try to flash with a custom rom I follow the rom loader instructions but I keep getting a error. This is Error 262 communications error. Dont understand whats going on or what I am doing wrong.
Any help would be great.
Many thanks
Hi, and welcome to the Forum.
Fist of all if you want to flash read this http://forum.xda-developers.com/showthread.php?t=713977
is the first Theard !!
2. If you are up To Date with your Rom also up to 3.14 Rom then HSPL won't work.
In this Case you need GoldCard.
Ghostrider
communications error....
usual hints are...
put phone into bootloader yourself before you start. connect usb and only then run your flash.
when it first times out, don't touch phone just rerun the flash.
try different usb ports.
always mention in your posts if using 64bit win.
Hello, I am having trouble flashing other roms on my phone. I have CWM and Cyanogenmod running, but whenever I try to flash another rom, the phone just boots back into Cyanogen. Am I missing a step here? My phone is a Samsung Galaxy S 4G, and I am trying to flash the latest ICBINB rom. I've been reading other threads but I just can't seem to find a solution.
Thanks
wheredoesitgo said:
Hello, I am having trouble flashing other roms on my phone. I have CWM and Cyanogenmod running, but whenever I try to flash another rom, the phone just boots back into Cyanogen. Am I missing a step here? My phone is a Samsung Galaxy S 4G, and I am trying to flash the latest ICBINB rom. I've been reading other threads but I just can't seem to find a solution.
Thanks
Click to expand...
Click to collapse
Could you provide a bit more information? Does the attempt to flash the ROM fail? Do you get any errors when trying to flash a new ROM? If a ROM flash is successful, there is no possible way for the device to boot up with a previous ROM since the system would be completely erased.