[Q] Eng hboot - HTC EVO 3D

Sorry if this has been ask but I'm on the phone and not coming up with much through the search. I've only had this phone for a little more then a day.
I've found this thread.
http://forum.xda-developers.com/showthread.php?p=16198978
But it hasn't been updated in a while and I'm just wondering if that is the only and or the best eng hboot available.
I'm on a CDMA Evo 3D rooted with revolutionary I had hboot 1.30 but after root I now have 1.40 s-off.
I do a lot of flashing and just want to be able to fully use fastboot in case I need it so any help would be great.
Also while I'm posting in here does anyone have any recommendations on radios I'm on the ones that came with the phone 0.97.00.0518 and from looking at the radio thread they seem to be a little old.
TIA for any help or replies.
Sent from my Mikrunny Evo 3D using tapatalk

linsalata28 said:
Sorry if this has been ask but I'm on the phone and not coming up with much through the search. I've only had this phone for a little more then a day.
I've found this thread.
http://forum.xda-developers.com/showthread.php?p=16198978
But it hasn't been updated in a while and I'm just wondering if that is the only and or the best eng hboot available.
I'm on a CDMA Evo 3D rooted with revolutionary I had hboot 1.30 but after root I now have 1.40 s-off.
I do a lot of flashing and just want to be able to fully use fastboot in case I need it so any help would be great.
Also while I'm posting in here does anyone have any recommendations on radios I'm on the ones that came with the phone 0.97.00.0518 and from looking at the radio thread they seem to be a little old.
TIA for any help or replies.
Sent from my Mikrunny Evo 3D using tapatalk
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=1192306
The ENG hboot in that thread is the one I'd think you want to use. As far as the radios go, I'm not super sure. I'm on the same as you, and haven't upgraded nor seen a need to update at this point. My signal and speeds are great, so I figure just leave well enough alone. If you do decide to update to the latest radios, don't flash just the radio. You need to find an all in one zip by xHausx or freeza to flash all the necessary firmware. There may be even more all in one zip's floating around, but I know those two definitely have one. Good luck.

k2buckley said:
http://forum.xda-developers.com/showthread.php?t=1192306
The ENG hboot in that thread is the one I'd think you want to use. As far as the radios go, I'm not super sure. I'm on the same as you, and haven't upgraded nor seen a need to update at this point. My signal and speeds are great, so I figure just leave well enough alone. If you do decide to update to the latest radios, don't flash just the radio. You need to find an all in one zip by xHausx or freeza to flash all the necessary firmware. There may be even more all in one zip's floating around, but I know those two definitely have one. Good luck.
Click to expand...
Click to collapse
Thanks
Do you know of a thread for hboots? I know the evo 4g had one.
Sent from my PG86100 using xda premium

linsalata28 said:
Thanks
Do you know of a thread for hboots? I know the evo 4g had one.
Sent from my PG86100 using xda premium
Click to expand...
Click to collapse
hey I remember you from my OG EVO i'm s-off 1.4 hboot and for radios's I used freeza's all in one, worked like a charm. Loving viperROM if you want a suggestion
link: http://forum.xda-developers.com/showpost.php?p=21374142&postcount=131

twister99403 said:
hey I remember you from my OG EVO i'm s-off 1.4 hboot and for radios's I used freeza's all in one, worked like a charm. Loving viperROM if you want a suggestion
link: http://forum.xda-developers.com/showpost.php?p=21374142&postcount=131
Click to expand...
Click to collapse
That looks like a whole ROM. Is there a PG86IMG.zip of just all the radios?
Thanks again for the reply.
Oh as for the hboot I found what I was looking for.
Sent from my Mikrunny Evo 3D using tapatalk

linsalata28 said:
Thanks
Do you know of a thread for hboots? I know the evo 4g had one.
Sent from my PG86100 using xda premium
Click to expand...
Click to collapse
The one he linked you is the only one I know of. Has the Eng Hboot and 1.40 in it. There may be other threads, haven't seen them though.

linsalata28 said:
That looks like a whole ROM. Is there a PG86IMG.zip of just all the radios?
Thanks again for the reply.
Oh as for the hboot I found what I was looking for.
Sent from my Mikrunny Evo 3D using tapatalk
Click to expand...
Click to collapse
it's not a whole rom lol when you download it the file is a pg186img.zip or whatever it's called. this is everything that was updated with the recent OTA, firmware, radios etc...won't relock your phone either...

KB112 said:
The one he linked you is the only one I know of. Has the Eng Hboot and 1.40 in it. There may be other threads, haven't seen them though.
Click to expand...
Click to collapse
LOL I didn't notice the link at first but I found it thanks.
Sent from my Mikrunny Evo 3D using tapatalk

twister99403 said:
it's not a whole rom lol when you download it the file is a pg186img.zip or whatever it's called. this is everything that was updated with the recent OTA, firmware, radios etc...won't relock your phone either...
Click to expand...
Click to collapse
Oh I got it , I was confused by the title of the thread but I noticed it was posted within a thread.
Thanks again for the help sorry I'm all out of thanks for the day.
Oh and thanks for the ROM suggestion I've already downloaded it but I'm trying out mikrunny atm and thats next on my list.
Sent from my Mikrunny Evo 3D using tapatalk

Related

HBOOT upgrade/downgrade

Hello XDA Users,
I got for 3 Days my EVO 3D.
The first thing I did was updating my EVO 3D to get some nice 3D Games.
Well after a quick search on the market I got an app that want root access for my EVO 3D.
My HBoot Version is currently 1.49.0018 so I want to root it.
Is there a way to downgrade it to 1.49.0007 - 8 or upgrade the Hboot Version to 1.50 to get root access?
best regards
Don't update to 1.5 whatever you do. If you still ahve the 1.49 go ahead and look in the 3D general forum at the stickies for a good rooting guide.
Sent from my PG86100 using Tapatalk
Here's one that looks promising. Please read everythig through before actually starting the process.
http://forum.xda-developers.com/showthread.php?t=1196131
Sent from my PG86100 using Tapatalk
YoMaMa7467 said:
Here's one that looks promising. Please read everythig through before actually starting the process.
http://forum.xda-developers.com/showthread.php?t=1196131
Sent from my PG86100 using Tapatalk
Click to expand...
Click to collapse
Only for 1.30 and 1.40
Try... http://forum.xda-developers.com/showthread.php?t=1316578
xHausx said:
Try... http://forum.xda-developers.com/showthread.php?t=1316578
Click to expand...
Click to collapse
for 1.49.0009 Users ;S
push,...............

S off? hboot 1.5?

Ok so I've had this question forever and I'm not sure its ever been addressed.
I rooted via revolutionary so I have s off.
for whatever reason I decided I wanted to have h boot 1.5.
I know about the kernel dilemma with hboot 1.5.
Does anyone if that would still affect me even with s off?
Does anyone have a link to unit 1.4 that I can try and flash through recov?
Thanks guys,
RJ
Sent from my PG86100 using xda premium
Sent from my PG86100 using XDA App
cant flash back to a previous version of hboot. tried it lol
Don't flash to hboot 1.5 sir its a one way street.you have already an S off
Sent from my PG86100 using XDA App
I really want to know what possessed you to want hboot 1.5
What benefit is there to flashing hboot 1.5?
DarkManX4lf said:
What benefit is there to flashing hboot 1.5?
Click to expand...
Click to collapse
There is no benefit. Its locked down so there is absolutely no reason to upgrade unless you don't like having root access.
Sent from my PG86100 using XDA App
If you ever wanted the newer hboot version (I don't see why anyone would ever want it) you could flash it but I don't know if it will keep S-Off. If it does, it will be locked so you might have to use HTC unlock to get the features of S-Off. Even then, you might still have to flash kernels via fastboot.
TLDR: Don't flash HBOOT 1.50.
Wanna trade phones? I've got 1.5 and I really wish I didn't.
Sent from my PG86100 using xda premium
SolsticeZero said:
I really want to know what possessed you to want hboot 1.5
Click to expand...
Click to collapse
Haha because 1.5 is obviously a bigger number than 1.4 right!? The bigger the number the cooler you are. Example you have 1.4 million dollars I have 1.5 million dollars. I'm living large. End of story
Um... Yeah I have s off with 1.5 so idk
Sent from my PG86100 using xda premium
Musik847 said:
Haha because 1.5 is obviously a bigger number than 1.4 right!? The bigger the number the cooler you are. Example you have 1.4 million dollars I have 1.5 million dollars. I'm living large. End of story
Um... Yeah I have s off with 1.5 so idk
Sent from my PG86100 using xda premium
Click to expand...
Click to collapse
No need to get pissy, I was simply asking if you think there are any advantages of having the 1.5 hboot over the 1.4 or the ENG hboot. I mean, there are no new featrues. In fact, if you wanted all of the hboot features, then the ENG hboot is your best bet.
wrapkgb said:
There is no benefit. Its locked down so there is absolutely no reason to upgrade unless you don't like having root access.
Sent from my PG86100 using XDA App
Click to expand...
Click to collapse
So basically the only reason htc updates its hboot is to keep phones locked?
DarkManX4lf said:
So basically the only reason htc updates its hboot is to keep phones locked?
Click to expand...
Click to collapse
That's exactly right.
@soltice i was jk. I didnt at all mean to sound rude. I just did it cause i wasnt thinking and i saw "hboot 1.5, the newest out there" and i said to myself i gotta have it.
Sent from my PG86100 using xda premium
Musik847 said:
@soltice i was jk. I didnt at all mean to sound rude. I just did it cause i wasnt thinking and i saw "hboot 1.5, the newest out there" and i said to myself i gotta have it.
Sent from my PG86100 using xda premium
Click to expand...
Click to collapse
Ah, good to know. It can be rather difficult to convey and understand sarcasm on the internet, especially on these forums. Anyways, as long as you have S-OFF, that's all that matters. However, if you want all the features possible, you want the ENG hboot. Haus has a thread on how to install it in the dev forums.
I did what you did, had 1.40 and flashed the wrong update, got 1.50 LOCKED with S-off. You can still flash ROMs and Kernels with no issues. I just had to reload TWRP recovery. Then I flashed the 1.40 Bootloader and all was well.
You can grab 1.40 and flash from here: http://forum.xda-developers.com/showthread.php?t=1192306&highlight=eng+bootloader
***To others reading this...do not flash this, unless you are S-OFF with 1.50 hboot***
You do not need to UNLOCK using the htcdev method. Just flash the 1.40 hboot and you will be fine.
KB112 said:
I did what you did, had 1.40 and flashed the wrong update, got 1.50 LOCKED with S-off. You can still flash ROMs and Kernels with no issues. I just had to reload TWRP recovery. Then I flashed the 1.40 Bootloader and all was well.
You can grab 1.40 and flash from here: http://forum.xda-developers.com/showthread.php?t=1192306&highlight=eng+bootloader
***To others reading this...do not flash this, unless you are S-OFF with 1.50 hboot***
You do not need to UNLOCK using the htcdev method. Just flash the 1.40 hboot and you will be fine.
Click to expand...
Click to collapse
Thanks man that's good news.
Sent from my PG86100 using xda premium
DarkManX4lf said:
So basically the only reason htc updates its hboot is to keep phones locked?
Click to expand...
Click to collapse
SolsticeZero said:
That's exactly right.
Click to expand...
Click to collapse
So if they want to keep the phones locked, why release an official bootloader unlock method?
/confused
_-Jay-_ said:
So if they want to keep the phones locked, why release an official bootloader unlock method?
/confused
Click to expand...
Click to collapse
They release an official unlock method that still gives them some control. For example, you can't flash a different hboot or a different radio on their unlock method.
What type of features are you talking about? Are you saying 1.4 h-boot over 1.3 adds extras to the phone?
SolsticeZero said:
They release an official unlock method that still gives them some control. For example, you can't flash a different hboot or a different radio on their unlock method.
Click to expand...
Click to collapse
Can u not flash new radios via fastboot like kernels? Always wondered that part.
Also if you can't then how do you get the new radios when they r released?
Sent from my PG86100 using XDA App

coming over from the ol 4g

I'm having to come over via insurance and the 3d is what I get. I have a few questions. Is obtaining root on the 3d a difficult process, as doing it on the 4g was simple. Ive noticed that there are 2 different models. CDMA or the other one which one is the one being given out. And overall how has everyones experience been with this phone. Thanks in advance for any feedback.
Is obtaining root on the 3d a difficult process, as doing it on the 4g was simple.
Click to expand...
Click to collapse
If your hboot is 1.4, you can root with Revolutionary. If it's 1.5, you will have to use the hboot downgrade method, found in the stickies.
Ive noticed that there are 2 different models. CDMA or the other one which one is the one being given out.
Click to expand...
Click to collapse
If you're on Sprint, you have the CDMA version.
It isn't hard at all, if you understand adb. You can root with revolutionary on hboot 1.4 or downgrade if you have hboot 1.5. If you dont want to downgrade try the juopunutbear tool for s-off. It work the first try for me.
Sent from my PG86100 using xda premium
dr.chucky said:
It isn't hard at all, if you understand adb. You can root with revolutionary on hboot 1.4 or downgrade if you have hboot 1.5. If you dont want to downgrade try the juopunutbear tool for s-off. It work the first try for me.
You can also go to HTCDEV.COM. They are very good in helping you unlock your bootloader
Click to expand...
Click to collapse
Welcome bud, I also got an evo 3d through insurance. Although I think the 4g had a better camera and I miss the looks, the 3d is a lot faster and has a much better screen. I've learned to love it.
Easiest way to do things is follow the htcdev.com unlock process to unlock the bootloader. Install superuser of course, then get 4ext recovery. There is a free version but I would highly recommend getting the paid version as I think it includes the app that lets you control everything from outside recovery. This has a smart flash feature for those who're left with s-on from the HTC unlock and hboot 1.5. It will let you install kernels like you normally would through recovery.
Only problem is, with any sense 3.6 ICS Rom you will have to use chads HTC leak kernel or else you will get boot loops. However 3d and USB mount won't work but you can always mount through recovery.
If you don't want to deal with all that, you can try the wire trick method to get s-off on hboot 1.5 so you can use the stock kernel on sense 3.6. It's stickied here in development. Hope all that helps.
Sent from my PG86100 using XDA
ncfastls1 said:
Welcome bud, I also got an evo 3d through insurance. Although I think the 4g had a better camera and I miss the looks, the 3d is a lot faster and has a much better screen. I've learned to love it.
Easiest way to do things is follow the htcdev.com unlock process to unlock the bootloader. Install superuser of course, then get 4ext recovery. There is a free version but I would highly recommend getting the paid version as I think it includes the app that lets you control everything from outside recovery. This has a smart flash feature for those who're left with s-on from the HTC unlock and hboot 1.5. It will let you install kernels like you normally would through recovery.
Only problem is, with any sense 3.6 ICS Rom you will have to use chads HTC leak kernel or else you will get boot loops. However 3d and USB mount won't work but you can always mount through recovery.
If you don't want to deal with all that, you can try the wire trick method to get s-off on hboot 1.5 so you can use the stock kernel on sense 3.6. It's stickied here in development. Hope all that helps.
Sent from my PG86100 using XDA
Click to expand...
Click to collapse
Don't misinform. I'm using stock HTC 3.0.16 kernel. Boots perfectly.
EDIT: Didn't read that last part. The reason people were getting boot loops, I believe, was the outdated adsp.img.
G.Newton said:
Don't misinform. I'm using stock HTC 3.0.16 kernel. Boots perfectly.
EDIT: Didn't read that last part. The reason people were getting boot loops, I believe, was the outdated adsp.img.
Click to expand...
Click to collapse
Looks like you don't have hboot 1.5 and are s-off...that's why. I was going under the assumption that every 3D is coming with hboot 1.5, and has for a while since I got mine back in november with 1.5.
So did they finally run out of the og evo? They are replacing them with 3d's
Sent from my PG86100 using XDA
Yea I got my 3D 6 mths ago for replacement for the 4G.
Welcome to 3D land. I've been happy with mine and still love this phone.
Sent from my PG86100 using Tapatalk 2
sand1303 said:
So did they finally run out of the og evo? They are replacing them with 3d's
Sent from my PG86100 using XDA
Click to expand...
Click to collapse
I think so.
But what I think is funny is that sprint still sells the og, but not the 3d.
Sent from my PG86100 using xda premium
VictoriousShooter said:
I think so.
But what I think is funny is that sprint still sells the og, but not the 3d.
Sent from my PG86100 using xda premium
Click to expand...
Click to collapse
Funny. They must be handing out refurb 3d's
Sent from my PG86100 using XDA
The thing about the 3d is that its a way better phone than 4G. Except for camera of course. But I think all the 3d's come with S-on and H-boot 1.5. HTCDEV really helped me out. When u root, try WarmTwoPointThree ROM. Even faster loadup time and comes with beats audio
Thanks for the feedback.. Im not going to lie. I love my ole evo but the last time I dropped it Did something to the Battery. I have a 3500 ex battery that if in the phone it will shut off every 10 to 20 mins. that and the charging port is failing. At least I get another HTC.

Best root method?

So I'm trying to figure out which root is the best one to go with. Any recommendations? Did some reading on lazy panda s-off and I'm assuming it's the best if not only way to get s-off. Here is the software my phone is on. I just wanna make sure I meet the prerequisites before I attempt this lol.
Sent from my White Evo
LazyPanda is the way to go.
Sent from my EVO using Tapatalk 2
Rxpert said:
LazyPanda is the way to go.
Sent from my EVO using Tapatalk 2
Click to expand...
Click to collapse
I was reading that it needs to be stock 1.13? Is that hboot or software?
Sent from my White Evo
3vo kid said:
I was reading that it needs to be stock 1.13? Is that hboot or software?
Sent from my White Evo
Click to expand...
Click to collapse
if you took the OTA then you are pretty much screwed and only have 1 option, HTC Unlock. you can use the Rawsomething method that makes it easy and automated, but no LazyPanda for you.
Spyderekz said:
if you took the OTA then you are pretty much screwed and only have 1 option, HTC Unlock. you can use the Rawsomething method that makes it easy and automated, but no LazyPanda for you.
Click to expand...
Click to collapse
I flashed the radio when i was just unlocked last week, installed the freshrom that it refers to in the lazypanda thread and followed the instructions to the letter yesterday with no issues and now im s-off.
sweet! i saw so many people take the update, even PKMN rom asked if you wanted to apply the update.
I have hboot 1.12 so I should be okay right?
Sent from my White Evo
3vo kid said:
I have hboot 1.12 so I should be okay right?
Sent from my White Evo
Click to expand...
Click to collapse
Yes, you haven't taken the OTA so you're fine
Sent from my EVO using Tapatalk 2
I noticed in the thread about LazyPanda s-off that there is a chance that u can brick the device? What's the probability of that happening?
Sent from my White Evo
It is unknown, but it is a temp brick and the unbricker has a 100% success rate.
Sent from my EVO using Tapatalk 2

Please help a noob

So I'm kinda a noob, at least for HTC. I have a VM 3D rooted s off. My question is I have tried to install ZR3D rom, but all i can get is a boot loop. my bootloader says juopunitbear 1.57.5757, is this my issue? I was thinking the loop is due to bootloader. I did run factory wipe, and dalvik/cache, installed using 4EXT. Can someone help please?
bknight99 said:
So I'm kinda a noob, at least for HTC. I have a VM 3D rooted s off. My question is I have tried to install ZR3D rom, but all i can get is a boot loop. my bootloader says juopunitbear 1.57.5757, is this my issue? I was thinking the loop is due to bootloader. I did run factory wipe, and dalvik/cache, installed using 4EXT. Can someone help please?
Click to expand...
Click to collapse
Yeah. Zr3d you need 1.50 or below. I believe it's a gb ROM.
Sent from my SlimRom jb'd EVO 3D.
Yes that is a GB ROM I use 1.04 eng or the 1.40 with those ROMs. If you need any help changing the hboot just pm me and I can walk you through it.
Sent from my Evo 3D CDMA using xda app-developers app
Would the same be true for a sense rom?
Sent from my HTCEVOV4G using xda app-developers app
bknight99 said:
Would the same be true for a sense rom?
Sent from my HTCEVOV4G using xda app-developers app
Click to expand...
Click to collapse
It depends on what version of android it is using.
bknight99 said:
Would the same be true for a sense rom?
Sent from my HTCEVOV4G using xda app-developers app
Click to expand...
Click to collapse
Some, not all. You have to read the OP.
Sent from my SlimRom jb'd EVO 3D.
The sense rom I had in mind is Frozen with sense 4.1. I have read and reread OP carefully, but no mention of bootloader version, but I also had problems flashing it. Got a message that zip was corrupt. Is that my issue or the actual download? I tried two dif. versions of that rom and dl'd each twice with same result
bknight99 said:
The sense rom I had in mind is Frozen with sense 4.1. I have read and reread OP carefully, but no mention of bootloader version, but I also had problems flashing it. Got a message that zip was corrupt. Is that my issue or the actual download? I tried two dif. versions of that rom and dl'd each twice with same result
Click to expand...
Click to collapse
Sounds like a bad download. The latest version is 3.0 final episode. I used jbear 1.58 hboot for that rom when I had it and it ran great. For you the 1.57 hboot should work fine. Only problem with sense 4 roms is the low volume. Just an FYI.
Sent from my SlimRom jb'd EVO 3D.
Oh right I was just reading that. I'll poke around and see what else looks good. Any suggestions for that hboot?
bknight99 said:
Oh right I was just reading that. I'll poke around and see what else looks good. Any suggestions for that hboot?
Click to expand...
Click to collapse
I use 1.50 or lower for jellybean, and gingerbread roms, and for you being VM 1.57 for ICS roms.
Sent from my SlimRom jb'd EVO 3D.
Thanks for your help and info. Heading off to attempt to downgrade now!
Edit: Worked awesome after i found this: http://forum.xda-developers.com/showpost.php?p=32259533&postcount=60
Ramjet is the man! Thanks everyone!
bknight99 said:
Thanks for your help and info. Heading off to attempt to downgrade now!
Click to expand...
Click to collapse
Any problems post back and let us know.
Sent from my SlimRom jb'd EVO 3D.
Of course will do!
bknight99 said:
Do I close this somehow or ??
Click to expand...
Click to collapse
Nope. All good.
Sent from my SlimRom jb'd EVO 3D.
You should try the viper 3d if you like sense 4.1. It has an xloud toggle in extended settings that gives audio a big boost.
Sent from my PC36100 using xda app-developers app
If you use viper use r284. The most stable and the volumes are all cranked up loud. It does have a ton of customizations.
Sent from my SlimRom jb'd EVO 3D.
aqualls said:
If you use viper use r284. The most stable and the volumes are all cranked up loud. It does have a ton of customizations.
Sent from my SlimRom jb'd EVO 3D.
Click to expand...
Click to collapse
Make sure you're on hboot 1.58 of you use that release though. That was before the ROM became hboot agnostic.
Sent from my PG86100 using Tapatalk 2
coal686 said:
Make sure you're on hboot 1.58 of you use that release though. That was before the ROM became hboot agnostic.
Sent from my PG86100 using Tapatalk 2
Click to expand...
Click to collapse
Did forget to mention that part.
Sent from my SlimRom jb'd EVO 3D.

Categories

Resources