Related
Hi, first i want to say sorry about my english level and thanks to people who reads my post.
I try to flash mi xperia mini pro sk17, with ..058 version of firmware, unlocked bootloader, rooted and with CWM.
Will follow the step by step instruction, and after instalation my phone is stuck on Sony Ericsson screen and nothing happens about 10 minutes and after then i remove the battery and try to enter in CWM and again nothing happens.
Does anyone have the same problem and how you resolve it ?
Thanks in advance for people who help me !
Respect for all XDA members !
Occured same problem, flashed my phone back to stock firmware until I find a solution.
Anyone has one?
ok...i will try to explain....I believe you have installed nAa-r2 CWM? It is defective CWM since it is put in system/ section... hybrom rewrites this section, thus, when you start recovery from system/ and try to install ROM, you try to erase CWM from under CWM....just update your FW to .62, install custom kernel you like and then make all wipes and install zip from sd card)
r06ert0 said:
ok...i will try to explain....I believe you have installed nAa-r2 CWM? It is defective CWM since it is put in system/ section... hybrom rewrites this section, thus, when you start recovery from system/ and try to install ROM, you try to erase CWM from under CWM....just update your FW to .62, install custom kernel you like and then make all wipes and install zip from sd card)
Click to expand...
Click to collapse
Yeah, I think the best way is to update to .62, then install b kernel (made by bbooff himself - unlock bootloader needed) then load Hybrom, then you can install any other kernel you like. But I have problem with X kernel with Hybrom, first one is bootloo and then draining batterry very fast ^^"
tanec said:
I try to flash mi xperia mini pro sk17, with ..058 version of firmware, unlocked bootloader, rooted and with CWM.
Click to expand...
Click to collapse
the rom is based on 0.62 Kernel, upgrade first to 0.62 then try flashing again, i dont know if this makes a difference but its worth a try
I solved my problem and installed Hybrom v12 now.
First, indeed, you need to have unlocked bootloader and .62 firmware, I used WotanClient to flash the firmware. Then I got other kernel, I used http://forum.xda-developers.com/showthread.php?t=1440161 this one.
Then I entered the Clockworkmod Recovery(press power button one-two times, when the screen goes lighter on turning on). Then I followed the instructions from the Hybrom and successfully installed it.
I got WT19i, but should apply the same.
Hi, After flashing NeroICSv2, my touch screen stopped working. 5 day tried different methods to ST15i, does not work.
Please help me!
djRemov said:
Hi, After flashing NeroICSv2, my touch screen stopped working. 5 day tried different methods to ST15i, does not work.
Please help me!
Click to expand...
Click to collapse
is it mini or live with walkman & also NeroICS v2 only support Mini Pro..... sorry buddy!!!! yhu gonna need to use flashtool to flash yur phone.
Sent from my Mini Pro using XDA Premium
I think ur touch is gone now..hope flashtool would recover.but i dont think so by reviews of members
U can check solution here
http://forum.xda-developers.com/showthread.php?t=1713449
Sent from my WT19i using xda premium
Somyab said:
I think ur touch is gone now..hope flashtool would recover.but i dont think so by reviews of members
U can check solution here
http://forum.xda-developers.com/showthread.php?t=1713449
Sent from my WT19i using xda premium
Click to expand...
Click to collapse
This is not working, I ran сalibrate.but, rewriting touch_smiltron_sony on touch_coconut_tpk.Hybrom_v10 does not work.
I do not want to pass to the service center, because I know that there are men of genius, and I hope that soon my problem will be solved.
Somyab said:
I think ur touch is gone now..hope flashtool would recover.but i dont think so by reviews of members
U can check solution here
http://forum.xda-developers.com/showthread.php?t=1713449
Sent from my WT19i using xda premium
Click to expand...
Click to collapse
Check that topic, try the solutions posted there.
I sent mine to service already, ROM testing killed the touchscreen.
Problem solved!
1)Install lastest firmware .62 for wt19i - use Flashtool
2) Install Rage Kernel 2.6 - use Flashtool
3) Then via CM from zip install hybrom_v12. for mini pro
3) Install "Touchscreen.zip" via CWM and reboot system
(Touch screens has to work)
4) Then again flash hybroman_v12 for wt19i
Good luck!!!
djRemov dude, where'd you get that touch flashfile? You made it yourself or is someone developing it? I fixed mine using the Hybrom v12 > Hybroman v12 way (without the file) and it still worked. Just curious..
I dug the hybrom zip and found the exact same hex files on it. Was thinking whether the just the script would work on it's own without flashing the minipro hybrom since they're doing essentially the same thing..
Thx dude
** oh yeah, not gonna test that theory anytime soon. I love my phone when it works~! LoL
neocyke said:
djRemov dude, where'd you get that touch flashfile? You made it yourself or is someone developing it? I fixed mine using the Hybrom v12 > Hybroman v12 way (without the file) and it still worked. Just curious..
I dug the hybrom zip and found the exact same hex files on it. Was thinking whether the just the script would work on it's own without flashing the minipro hybrom since they're doing essentially the same thing..
Thx dude
** oh yeah, not gonna test that theory anytime soon. I love my phone when it works~! LoL
Click to expand...
Click to collapse
I made myself.
At first I wanted to copy a SYS from another phone, but wondered, and concluded that the MINI PRO ROM has changed about the path to the touch screen files in the SYS . Renaming touch_coconut_tpk.hex in touch_mango_....hex, and replaced by one file in the folder firmware.
Do you guys have a link for the Mini Pro ROM? I'm desperate now.. =(
I still have a HYBROMAN v16 do you think that would work?
EDIT: I was able to download HYBROM_V12 but CWM keeps saying that the file is bad. Downloaded and re downloaded at least 10x now.. Any ideas?
UPDATE: For those who are having problems with their touchscreen, this method works! (finally found a working version of hybrom_v12)
@djRemov: You are a god!
djRemov said:
I made myself.
At first I wanted to copy a SYS from another phone, but wondered, and concluded that the MINI PRO ROM has changed about the path to the touch screen files in the SYS . Renaming touch_coconut_tpk.hex in touch_mango_....hex, and replaced by one file in the folder firmware.
Click to expand...
Click to collapse
Lemme see if I understand this right. Basically, what it does is overwrite the hex file and starts the touchscreen script? In which case it continues from the hybrom flash and replaces the hex from the minipro with the lww one?
WT19i Touchscreen Issue Solved
Solution
Follow these steps.
1) First you need to download and copy these two ROM zip files to your SD Card. The download links are given below.
a) (Note: Add (https) then //) before you enter the address which is given below in the address bar for downloading the file.)
|
V
dl.dropbox.com/u/61884099/hybrom_v10.zip
b) (Note: Add (www) then (.) before you enter the address which is given below in the address bar for downloading the file.)
|
V
mediafire.com/?32i7l0w4hpfzx81
2) Switch Off your phone and flash the latest GB Stock Firmware (GB !4.0.2.A.0.62) by using Flash Tool.
You will get this Stock Firmware from here. If you have already downloaded the file, skip this download.
(Note: Add (www) then (.) before you enter the address which is given below in the address bar for downloading the file.)
|
V
mediafire.com/?ervpg54922b9c0p
3) Switch on by connecting usb cable to your computer by press and hold the volume up button on your mobile for Fastboot mode . Download and extract the kernel file which i attached with this post
(kernel_coconut-v4.zip) and flash it via Fastboot Mode in Flash Tool.
4) Switch on your mobile and press the volume down button to enter the CWM Menu and do these things.
a) wipe data/factory reset
b) wipe cache partiton
c) wipe Dalvik Cache
5) After that Do 'Install zip from sdcard' and select hybrom_v10.zip file from your sdcard which you downloaded and copied to your SDCard
earlier.
6) When the installation complete, restart your phone. You will see that your touch is partially working !! Don't waste your time by checking
Touchscreen. Switch off your mobile by remove the battery and put it again.
7) Switch on your mobile and boot into CWM Mode again. Don't do these things(wipe data/factory reset, wipe cache partiton and wipe Dalvik
Cache) again for installing new zip from SDCard. (I'll tell the reason later )
Do 'Install zip from sdcard' and select hybroman_v12.zip file from your sdcard which you downloaded and copied to your SDCard
earlier.
8) After the Installation restart your phone and wait for booting into new ROM hybrom v12. Now you can see that your Touchscreen Issue is
solved !!!! :laugh:
Optional:
If you are facing wifi problem just flash the zip file via CWM (coconut_wlan_v4.zip) which is atteched with this post.
If you are not satisfied with hyvrom v12, you can also flash again the Stock Firmware or any other ROM which only supported by LWW
Cheers and Don't forget to hit the THANKS. Sorry for my bad English
djRemov said:
1)Install lastest firmware .62 for wt19i - use Flashtool
2) Install Rage Kernel 2.6 - use Flashtool
3) Then via CM from zip install hybrom_v12. for mini pro
3) Install "Touchscreen.zip" via CWM and reboot system
(Touch screens has to work)
4) Then again flash hybroman_v12 for wt19i
Good luck!!!
Click to expand...
Click to collapse
So sad, i did but my lww still dont work, only power+walkman+home+volume buttons work.
are there any other ways to fix that problems.
and pls share hybrom_V12 for minipro. i can't search it. so i did with v10.
lww screen cant use
not work master,, any solution for me,,??
please help me master,,
djRemov said:
This is not working, I ran сalibrate.but, rewriting touch_smiltron_sony on touch_coconut_tpk.Hybrom_v10 does not work.
I do not want to pass to the service center, because I know that there are men of genius, and I hope that soon my problem will be solved.
Click to expand...
Click to collapse
:good:
Touch Screen Not Working SK17i
djRemov said:
1)Install lastest firmware .62 for wt19i - use Flashtool
2) Install Rage Kernel 2.6 - use Flashtool
3) Then via CM from zip install hybrom_v12. for mini pro
3) Install "Touchscreen.zip" via CWM and reboot system
(Touch screens has to work)
4) Then again flash hybroman_v12 for wt19i
Good luck!!!
Click to expand...
Click to collapse
Dear Buddy tried your method as well but still no success ????????
non of the solutions seemed to work, maybe we're facing a hardware problem
ironhide3.2 said:
non of the solutions seemed to work, maybe we're facing a hardware problem
Click to expand...
Click to collapse
try this its working .. i have been tested it twice:good::good::good::good::good::good::good:
Things we need:
Flash tools
Rage kernel gb
Stock .62 firmware for your device(ftf)
wrong rom that bricked your touchscreen
What should we do:
1:flash your device gb .62 firmware
2:flash rage kernel
3:flash that wrong rom again
4:if wrong rom was ics,rom will not boot then remove the battery to turn phone off then flash .62 firmware again if it was gb,do the same work
5:wait until stock rom boots the touch will be fixed
6:if touch screen fixed,press thanks button
djRemov said:
1)Install lastest firmware .62 for wt19i - use Flashtool
2) Install Rage Kernel 2.6 - use Flashtool
3) Then via CM from zip install hybrom_v12. for mini pro
3) Install "Touchscreen.zip" via CWM and reboot system
(Touch screens has to work)
4) Then again flash hybroman_v12 for wt19i
Good luck!!!
Click to expand...
Click to collapse
Can i use this touchscreen.zip for my st15i with the same prob???
Solutionfor Normal Users
Follow these steps.
1) First you need to download and copy these two ROM zip files to your SD Card. The download links are given below.
a) (Note: Add (https) then //) before you enter the address which is given below in the address bar for downloading the file.)
|
V
dl.dropbox.com/u/61884099/hybrom_v10.zip
b) (Note: Add (www) then (.) before you enter the address which is given below in the address bar for downloading the file.)
|
V
mediafire.com/?32i7l0w4hpfzx81
2) Switch Off your phone and flash the latest GB Stock Firmware (GB !4.0.2.A.0.62) by using Flash Tool.
You will get this Stock Firmware from here. If you have already downloaded the file, skip this download.
(Note: Add (www) then (.) before you enter the address which is given below in the address bar for downloading the file.)
|
V
mediafire.com/?ervpg54922b9c0p
3) After that don't switch on your mobile. Download and extract the kernel file which i attached with this post (kernel_coconut-v4.zip) and flash it
via Fastboot Mode in Flash Tool.
4) After that switch on your mobile and press the volume down button to enter the CWM Menu and do these things.
a) wipe data/factory reset
b) wipe cache partiton
c) wipe Dalvik Cache
5) After that Do 'Install zip from sdcard' and select hybrom_v10.zip file from your sdcard which you downloaded and copied to your SDCard
earlier.
6) When the installation complete, restart your phone. You will see that your touch is partially working !! Don't waste your time by checking
Touchscreen. Switch off your mobile by remove the battery and put it again.
7) Switch on your mobile and boot into CWM Mode again. Don't do these things(wipe data/factory reset, wipe cache partiton and wipe Dalvik
Cache) again for installing new zip from SDCard. (I'll tell the reason later )
Do 'Install zip from sdcard' and select hybroman_v12.zip file from your sdcard which you downloaded and copied to your SDCard
earlier.
8) After the Installation restart your phone and wait for booting into new ROM hybrom v12. Now you can see that your Touchscreen Issue is
solved !!!! :laugh:
Optional:
If you are facing wifi problem just flash the zip file via CWM (coconut_wlan_v4.zip) which is atteched with this post.
If you are not satisfied with hyvrom v12, you can also flash again the Stock Firmware or any other ROM which only supported by LWW
Cheers and Don't forget to hit the THANKS. Sorry for my bad English
Solution for advanced users
Solution for Advanced Users:
1) flash stock firmware (.62)
2) flash x kernel or rage kernel for CWM
3) install Hybrom V10 via CWM
4) install Hybrom V12 via CWM without wiping any data ad Dalvik Cache
5) Reboot
JK347 said:
Solution for Advanced Users:
1) flash stock firmware (.62)
2) flash x kernel or rage kernel for CWM
3) install Hybrom V10 via CWM
4) install Hybrom V12 via CWM without wiping any data ad Dalvik Cache
5) Reboot
Click to expand...
Click to collapse
What is this touch issue? How does installing hybrom fix it? What if you dont want hybrom?
Cheers,
Evil.
Reason of Touchscreen issue
My Wt19i touchscreen is damaged when i installed rom kernel and rom. But it was solved when i installed hybrom v10 and after hybrom v12 with x kernel. That is why i posted the solution here.
JK347 said:
My Wt19i touchscreen is damaged when i installed rom kernel and rom. But it was solved when i installed hybrom v10 and after hybrom v12 with x kernel. That is why i posted the solution here.
Click to expand...
Click to collapse
Flashing back to stock didnt fix it? Because if its not a HW issue then flashing to stock give you back your stock files and kernel so then your touch should be working again. Flashing hybrom v10 then v12 will do nothing other than give you the files of that rom.
What was the rom you installed that broke your touch? There are only two possible reasons for that to happen, 1, you had a corrupt .zip file, or 2, you flashed a rom and kernel that was not for your device.
Cheers,
Evil..
WT19i Touchscreen Issue
evilbarcode said:
Flashing back to stock didnt fix it? Because if its not a HW issue then flashing to stock give you back your stock files and kernel so then your touch should be working again. Flashing hybrom v10 then v12 will do nothing other than give you the files of that rom.
What was the rom you installed that broke your touch? There are only two possible reasons for that to happen, 1, you had a corrupt .zip file, or 2, you flashed a rom and kernel that was not for your device.
Cheers,
Evil..
Click to expand...
Click to collapse
I tried 3 stock firmwares and other some roms also but the touchscreen problem was not solved. So I just tried to use hybrom v10, then touchscreen worked partially. Then i installed hybrom v12 over it without wiping any user data and dalvick cache. Voila it was worked !!! that is why i posted that solution here.
Anyway you just try this solution when you have this touchscreen problem.
JK347 said:
I tried 3 stock firmwares and other some roms also but the touchscreen problem was not solved. So I just tried to use hybrom v10, then touchscreen worked partially. Then i installed hybrom v12 over it without wiping any user data and dalvick cache. Voila it was worked !!! that is why i posted that solution here.
Anyway you just try this solution when you have this touchscreen problem.
Click to expand...
Click to collapse
Sorry I don't mean to sound like I'm doubting you, I'm just really curious as to how that works.
It still not work
I did it. but my wt19i is not work. Now, my Touchscreen have been died.
Before that, my wt19i is ok except touchscreen, sometimes work, sometimes no. but i can use it. :crying:
Pls help me and show me how to fix it. :highfive:
RE : WT19i Touchscreen Solution
silverddn9x said:
I did it. but my wt19i is not work. Now, my Touchscreen have been died.
Before that, my wt19i is ok except touchscreen, sometimes work, sometimes no. but i can use it. :crying:
Pls help me and show me how to fix it. :highfive:
Click to expand...
Click to collapse
Which solution that you used recently ?!!
JK347 said:
Which solution that you used recently ?!!
Click to expand...
Click to collapse
I installed rom kernel and rom follow your instructions.
I did twice. but it still not work.
will this work on locked bootloader??
sorry my bad english ..
thank you friend!:good:
jsebarj said:
thank you friend!:good:
Click to expand...
Click to collapse
nice tutor :victory:
help!!
sup dude could you upload the dropbox file??
only works for unlocked bootloader?
Touch Issue ?? there isnt any touch issue on my wt19i
Thank you is working
Can anyone help me? I've done this procedure several times.
However, the touch of my wt19a not yet returned to work. what do
I do?
hordanofear said:
Can anyone help me? I've done this procedure several times.
However, the touch of my wt19a not yet returned to work. what do
I do?
Click to expand...
Click to collapse
Maybe hardware problem, Send it to Repair Center.
Mine was Hardware problem, And it solved
Need Urgent Help
JK347 said:
Solution for Advanced Users:
1) flash stock firmware (.62)
2) flash x kernel or rage kernel for CWM
3) install Hybrom V10 via CWM
4) install Hybrom V12 via CWM without wiping any data ad Dalvik Cache
5) Reboot
Click to expand...
Click to collapse
I did as you said and I was going as you mentioned i.e; after step 3 my touch screen will work partially, but problem I am facing is totally related to step 4
1- couldn't find hybrom v12 easily, after half an hour I found it but not sure if its a working one or not.
2- after installing it via cwm i restarted but touch didnt work.
kindly upload each and every required files asap because this is the first time my touch screen responsed to something .
Thanks for your help.
Locked Bootloader
Hi, I have a WT19a and I have locked the bootloader, I have the problem that the display works partially, what is the solution for locked bootloader? Thanks and sorry for my English (google translator)
Hi evrery body
I bought Xperia mini today and i want to update in ICS
i have 2 quastion!!
1- which file i have to download .. there are many thread and i dont know which is necassary 4me???
2- how i reboot in cwm ?? plz helpppppppppp
What file do you want to download and from where?
Install CWM, turn off phone, then turn it on and when the Sony or Sony Ericsson logo appears, press volume down many times, until a menu appears.
Just simply update your phone using SEUS (SonyEricsson Update Service). Just download it and follow the steps.
Its always work to update.
Don't forget, if it's help, simply click Thanks too :beer::beer:
Sent from my SK17i using xda app-developers app
For 2nd questions, you need to root your phone. Do you ever heard about how to root sk17i?
If you have rooted your phone, just download CWM installer from market, install it, open, and install clockworld mode. After you installed it, theres a menu to reboot your phone into cwm mode.
Feel free to ask more if you find difficulties.
Sent from my SK17i using xda app-developers app
follow these steps to root ur xperia mini http://forum.xda-developers.com/showthread.php?t=1709880 and after that install this app https://play.google.com/store/apps/...251bGwsMSwxLDEsImNvbS5wdnkuQ1dNaW5zdGFsZXIiXQ..
Thanks every body.. i have to root my device first and then instal cwm???
I want to instal this http://forum.xda-developers.com/showthread.php?t=1707876
aida70 said:
Thanks every body.. i have to root my device first and then instal cwm???
I want to instal this http://forum.xda-developers.com/showthread.php?t=1707876
Click to expand...
Click to collapse
did u unlock your bootloader? before installing a custom rom u have to unlock boot loader its must. After unlocking install this kernel http://forum.xda-developers.com/showthread.php?t=1709032 its pre rooted and cwm is installed in it already and then install ur custom roms zip through cwm
plzzzzzz help me again friends!
i rooted my device and every thing in ok.. i instal cwm and then install this:
http://forum.xda-developers.com/showthread.php?t=1707876
after chose from sd cart and instal my phone not turn on again!
it stay on sony ericson logo and do not nothing!!! plzz helpppppppppp
aida70 said:
plzzzzzz help me again friends!
i rooted my device and every thing in ok.. i instal cwm and then install this:
http://forum.xda-developers.com/showthread.php?t=1707876
after chose from sd cart and instal my phone not turn on again!
it stay on sony ericson logo and do not nothing!!! plzz helpppppppppp
Click to expand...
Click to collapse
first flash this kernel http://forum.xda-developers.com/showthread.php?t=1709032 then install any custom rom. But u have to unlock your bootloader first.
Vilegar year
usman_fareed said:
first flash this kernel http://forum.xda-developers.com/showthread.php?t=1709032 then install any custom rom. But u have to unlock your bootloader first.
Click to expand...
Click to collapse
phine dont go to the flash mode.. i dont flash this.. stay on sony ericsson logo yet.. what is the problem???
When you can see Sony boot logo lower brightness wait, when its brightness increase press volume down key.
Sent from my Live with Walkman using Tapatalk 2
aida70 said:
phine dont go to the flash mode.. i dont flash this.. stay on sony ericsson logo yet.. what is the problem???
Click to expand...
Click to collapse
If I have got you right, after you installing the custom ROM, without flashing the necessary kernel and without unlocking bootloader, (which is totally wrong) your phone gets stuck on the SONY logo screen right?
The solution now is to, calm down first, read the posts made here properly(I say this because you were told to unlock bootloader and to flash the necessary kernel before installing the custom ROM by a XDA member on this thread itself, but you did none of those) turn off your phone, and use flashtool to do a full flash of your phone.
Download the .ftf of your phone, ICS or GB, whichever, then flash your phone using that ,ftf file via flashtool, then follow the tutorials available here on XDA to root your phone (The tutorials differ for ICS and GB), root your phone, start it, download and install 'Xperia CWM auto installer' from the market, then install CWM using this app.
Then unlock your bootloader using the various methods available but be aware of the warranty issues involved.
Then flash the necessary kernel on your phone, there's a tutorial for this too on XDA, then start your phone, when the SONY logo brightens keep pressing the volume down key repeatedly and you will enter CWM.
Then follow the instructions on the thread from where you have downloaded the ROM you want to install and then reboot.
Voila.. you are on custom ROM of your choice my friend..
I have tried to make this as simple as possible, but if you still need more help, feel free to ask.
NOTE: Do not flash custom kernels without unlocking bootloader.
hi all!
after successfully flashing and rooting my neo v i started trying these excellent roms of XDA developers.
so, with locked BL, after installing XPERIA Ultimate HD and Zelly Bean i went for a try on Ice Cream pureness v14.
i guess my mistake was that after a full wipe from CWM i installed the ROM, the neo v patch and the upgrade without any reboot but the last one.
anyway, i am stuck on a bootloop now
can't access CWM (i guess because of system format....(?))
i flashed stock rom with flashtool but still nothing
i am searching for hours to avoid posting such an embarrassing "first post" but i really can't find a solution
thanx in advance!
EDIT : Just managed to recover the phone using Sony Ericsson update service software, turning it back to 4.0.4 stock. So i am going again for root etc. I guess there should be an easier way so if anybody knows it please share.
and if any admin could fix that "rootloop" in the title....
cheers!
Yes, there is an easier way. Unlock your phone bootloader with one of two methods. I would choose testpoint method.
Just some tips: When you flash zip, always do wipe cache/data (don't wipe system like someone does), check that it is for locked bootloader, for Neo V not L or Neo etc. I never had those problems. Anyway, I don't see advantage of those ROMs on locked bootloader except of removing bloatware, which you can do by yourself.
And it is called bootloop not rootloop.
ReznorNInchNails said:
Yes, there is an easier way. Unlock your phone bootloader with one of two methods. I would choose testpoint method.
Just some tips: When you flash zip, always do wipe cache/data (don't wipe system like someone does), check that it is for locked bootloader, for Neo V not L or Neo etc. I never had those problems. Anyway, I don't see advantage of those ROMs on locked bootloader except of removing bloatware, which you can do by yourself.
And it is called bootloop not rootloop.
Click to expand...
Click to collapse
Good one bro.. People should learn to help.. Like you did here.. :thumbup:
Sent from my MT11i using xda premium
ReznorNInchNails said:
Yes, there is an easier way. Unlock your phone bootloader with one of two methods. I would choose testpoint method.
Just some tips: When you flash zip, always do wipe cache/data (don't wipe system like someone does), check that it is for locked bootloader, for Neo V not L or Neo etc. I never had those problems. Anyway, I don't see advantage of those ROMs on locked bootloader except of removing bloatware, which you can do by yourself.
And it is called bootloop not rootloop.
Click to expand...
Click to collapse
Thanx for tips! I am quite new to all this so I thought unlocked bl would come at the next level. I guess I might go for it sooner.
I know about the rootloop mistake that's why I asked for a correction
Cheers
I feel like a noob again. My (rooted, bootloader unlocked, custom rom) Neo V is stucked at bootloop. I tried flashing a stock kernel and it just stucked at the Sony logo, Then I flashed a custom kernel and it only light up the screen and nothing happen. Really need help...
I was trying to flash a custom rom and it was telling me to wipe battery stat and cache in advance option
Gemichi said:
I feel like a noob again. My (rooted, bootloader unlocked, custom rom) Neo V is stucked at bootloop. I tried flashing a stock kernel and it just stucked at the Sony logo, Then I flashed a custom kernel and it only light up the screen and nothing happen. Really need help...
I was trying to flash a custom rom and it was telling me to wipe battery stat and cache in advance option
Click to expand...
Click to collapse
Just flash stock ftf file using flashtool.. Next time read the instructions properly before flashing..
Sent from my Xperia Neo V using xda premium
vishal_android freak said:
Just flash stock ftf file using flashtool.. Next time read the instructions properly before flashing..
Sent from my Xperia Neo V using xda premium
Click to expand...
Click to collapse
Ok, I flashed the .ftf and I was able to get into CWM, but when I go back and download the stable cm9 from Cyangenmod, It shows status 7 when flashing...
every rom I try to flash, I get status 7, I tried edit the "updater-script" and it just show installation aborted right away.
Flash kernel first and then ROM
Sent from my Xperia Neo V
Gemichi said:
Ok, I flashed the .ftf and I was able to get into CWM, but when I go back and download the stable cm9 from Cyangenmod, It shows status 7 when flashing...
every rom I try to flash, I get status 7, I tried edit the "updater-script" and it just show installation aborted right away.
Click to expand...
Click to collapse
Let me clarify this to you first,
CM doesn't work on Locked Bootloader.
So if you're having locked bootloader, there is one way to fix this:
Reflash ICS .ftf & do the whole rooting, installing CWM Recovery procedure again. Go to recovery & install the ROM with instructions stated in ROM thread.
If you have unlocked the bootloader, two ways to solve this problem:
1. Flash any other ICS kernel. Go to recovery, wipe everything except SDCard of course xD
Then power off the phone & flash kernel from CM9 zip. Install CM9.
2. If above doesn't fix the problem, reflash the ICS .ftf again. Flash CM9 kernel & install the zip usual way.
Cheers!
ak070
ak070 said:
Let me clarify this to you first,
CM doesn't work on Locked Bootloader.
So if you're having locked bootloader, there is one way to fix this:
Reflash ICS .ftf & do the whole rooting, installing CWM Recovery procedure again. Go to recovery & install the ROM with instructions stated in ROM thread.
If you have unlocked the bootloader, two ways to solve this problem:
1. Flash any other ICS kernel. Go to recovery, wipe everything except SDCard of course xD
Then power off the phone & flash kernel from CM9 zip. Install CM9.
2. If above doesn't fix the problem, reflash the ICS .ftf again. Flash CM9 kernel & install the zip usual way.
Cheers!
ak070
Click to expand...
Click to collapse
I have unlocked my bootloader lol. Finally I got it back to normal now. I flashed the stock ftf, then update it to a newer firmware to root it. Flash CWM, Follow the instruction on how to flash cm10 (I use cm9) and everything is fine now, but I still want to flash other custom rom...
@Gemichi
If your Bootloader unlocked,you dont need install CWM or root your phone...
What you have to do is just flash kernel which have built-in CWM.
I advice you read again how to flash kernel,I see your post you install CWM,from that I know your bootloader NOT unlocked
Sent from my Xperia Neo V
megatpanji said:
@Gemichi
If your Bootloader unlocked,you dont need install CWM or root your phone...
What you have to do is just flash kernel which have built-in CWM.
I advice you read again how to flash kernel,I see your post you install CWM,from that I know your bootloader NOT unlocked
Sent from my Xperia Neo V
Click to expand...
Click to collapse
Ok I got it back to normal now, got CWM, flashed cutsom rom. Thanks