[Q] IR Remote learning mode - Sony Tablet S

Hello,
I have been trying to get a satellite receiver box and a media box to work with the Sony IR. They are not listed in the list of devices so I tried the learning mode.
For both devices the IR application learns the commands (for power on/off, change channel, etc ...) but when I test, it doesn't work
Has anyone managed to successfully get the tablet to learn IR commands ? Is there a trick to it
Thanks in advance

ive gotten it to work, without issue with my equipment. just baseless speculation here, but maybe it matters if you have the tablet learn a tap of the button vs holding down a button?

I used the learn mode. I found it to be a bit finicky. Try it a few different times. Try varying the distance, position, and tap vs hold

Hello my friend,
As i am a home cinema maniac (and this is the main reason i bought this tablet) i can confirm that learning mode working perfect as i have learned more than 7 remote controls to the tablet.
When you choose the button and after you learn the command, do you receive error message or what? Some times regarding the remote unit it is a bit difficult to take the command.
Chris.

Thanks for your replies
I will try the tap suggestion
Basically the tablet says it learned the command (eg power on/off) but when I actually test it, it doesn't work.
I am trying it on an IOMEGA media server and a Hivion (unknown brand) satellite dish receiver
In easy mode it works like a charm on Pioneer and Panasonic equipment
Cheers

The tap trick seems to work most of the time. Only a few stubborn keys yet to be learned by the tablet!
Thanks again for the suggestion

thatu said:
The tap trick seems to work most of the time. Only a few stubborn keys yet to be learned by the tablet!
Thanks again for the suggestion
Click to expand...
Click to collapse
I just hold the button down permanently on the remote i want to learn frmo then wave it in front of the IR sensor on the table but seems you have got most of it sorted

animaleyes76 said:
I just hold the button down permanently on the remote i want to learn frmo then wave it in front of the IR sensor on the table but seems you have got most of it sorted
Click to expand...
Click to collapse
Be careful doing this as many devices will react unpredictably to the "held-down" signal as opposed to the single press command.

Related

Apple Wireless Keyboard and TNT Lite

I am not sure how many of you out there share the same desire to have a thin/small wireless keyboard to go along with your beloved GTablet. I have a netbook carrying bag that barely fits the dimensions of the Gtab and I wanted a keyboard that matches that width to fit in the bag. The apple wireless keyboard is exactly 11 inches wide and the Gtab is 10.5, close enough in my case.
I am running TNT Lite 4.4.0 and decided to buy and connect the bluetooth keyboard with little initial success. I am not an android developer, but don't give up easily and am happy to report that I finally got it to work. Here is how:
1) Download free app called Bluetooth Keyboard Easyconnect
2) Turn on bluetooth
3) Turn on Apple keyboard
4) Scan for bluetooth devices on GTab
5) Pair to Apple Keyboard after it is discovered
6) Enter a pin into your GTab, (ex. 0000) and then OK.
7) Quickly, while it is trying to connect, enter the same pin into the Apple Keyboard and press Return. They will now be "paired but not connected"
8) Open Bluetooth Keyboard Easyconnect and it will take care of the connecting part.
Hope this helps someone.
Absolutely. I futzed for 30 minutes before giving up yesterday, I could get it paired but not connected. Thanks for the info!
I was able to connect a Logitech DiNovo mini using this info. The touch pad worked too but was erratic.
Are you able to get the greater than/less than symbols (< >) to work? I have a bluetooth palm keyboard and can't seem to get these characters to come up. Instead it gives me a semi-colon and colon.
opnscraddict,
I hadn't tried that one yet, but you are right. < and > don't seem to be working. Everything else I tried works though. Hmmm, maybe one of the paid keyboard apps would provide a key re-mapping functionality. I think I can live with it the way it is though, and use the onscreen keyboard when necessary for those two characters.
Works for Bluetooth mouse
I've also used EasyConnect to get my bluetooth mouse working. I was in the same situation with my mouse as the keyboard - it would pair but not connect.
I'm working on replacing my school laptop with my GTab and I need those keys for my C++ class. I found a thread on how to customize the key mapping, I'll try it when I get home today. Link
Does your bluetooth keyboard reconnect automatically when you turn on bluetooth without any interaction? I couldn't get mine to connect again after the first time.
opnsrcaddict said:
I'm working on replacing my school laptop with my GTab and....
Click to expand...
Click to collapse
I think you are going to regret that decision.
Right, I'm not entirely sure on how feasible it is. However, the majority of my time on my school laptop is spent on Facebook, Onenote and Visual Studio. The battery life and weight advantages of the Gtab make it an attractive replacement.
I can confirm that by following the instructions that I linked to in my previous post I was able to remap the keys to enable the greater than and less than signs.
Huh?
opnsrcaddict said:
Right, I'm not entirely sure on how feasible it is. However, the majority of my time on my school laptop is spent on Facebook, Onenote and Visual Studio. The battery life and weight advantages of the Gtab make it an attractive replacement.
I can confirm that by following the instructions that I linked to in my previous post I was able to remap the keys to enable the greater than and less than signs.
Click to expand...
Click to collapse
How are you going to install Visual Studio on the gTab?
I am going to access my workstation at home through rdp. I've tested the scaling and latency and it is pretty seamless. I also considered trying to run Ubuntu through VNC locally on the tablet and just using a linux IDE. With this keyboard workign 100%, this seems in the realm of possibility now.
Ah... gotcha. I use LogMeIn Ignition to access my laptop from my gTab. I used to have to carry that laptop around on trips and now I just take my gTab.
finally gave up
I tried for a whole half a day to get my Apple wireless keyboard to work. I'm using Vegan.
I finally gave up when I just plugged my full sized Dell keyboard in, and it worked like a charm without any issues at all. I'm just going to go hunt for a mini USB keyboard and I will be more than satisfied with that.
http://www.amazon.com/Viewsonic-G-Tablet-Case-Keyboard-Stand/dp/B004JF9N1O

[FIXED] Any way to hide mouse pointer when using bluetooth keyboard?

Whenever I connect my mini bluetooth keyboard, a mouse pointer comes up in the middle of the screen. The keyboard doesn't have any controls for the mouse (I think) and there is no way to get rid of it without disabling the bluetooth keyboard.
Does anyone know of anyway to disable the mouse pointer or hide it somehow? I am on 2.3.3
Screenshot of pointer:
imgur.com/YLCIE (Can't post links)
EDIT: Changed ROM to Exynos Extreme 3.2, mouse pointer gone now
Yea, I have the same issue... Anyone know of a fix?
Not a fix as such ...
I have one of the cheap EBay bluetooth keyboards but I don't have this problem. In other words, my keyboard identifies itself to the phone just as a keyboard, your one obviously claims to be a mouse as well.
I'd say you have 2 options:
Maybe, just maybe, somewhere in Settings -> Wireless and network ->Bluetooth Settings under Bluetooth devices, you will be able to modify the settings for your keyboard: Press and Hold the device and click on options. I have a tickbox for "HID device" only - you may have something else for pointing device?
Maybe your keyboard has a mouse-type device on it. Assuming there isn't a obvious d-pad somewhere, maybe it's a 2-key combination involving the use of some "magic" key along with the arrow keys. If you can figure it out, then just move the pointer out of the way, and you're good!
arabbitte said:
I have one of the cheap EBay bluetooth keyboards but I don't have this problem. In other words, my keyboard identifies itself to the phone just as a keyboard, your one obviously claims to be a mouse as well.
I'd say you have 2 options:
Maybe, just maybe, somewhere in Settings -> Wireless and network ->Bluetooth Settings under Bluetooth devices, you will be able to modify the settings for your keyboard: Press and Hold the device and click on options. I have a tickbox for "HID device" only - you may have something else for pointing device?
Maybe your keyboard has a mouse-type device on it. Assuming there isn't a obvious d-pad somewhere, maybe it's a 2-key combination involving the use of some "magic" key along with the arrow keys. If you can figure it out, then just move the pointer out of the way, and you're good!
Click to expand...
Click to collapse
Unfortunately I only have one profile in the bluetooth settings as well. There is a D-pad on the keyboard on the WASD keys but when using them all it does is cycles through the context menus.
Is there an app that would allow me to control the mouse pointer by touch or by binding the directions to keys on the keyboard? I've searched but found zilch
I have exactly the same problem on a galaxy s 1 with gingerbread and would love to know of a fix. I tried to find an app to move the pointer to the right edge of the screen but I couldn't find anything.
I have the exactly same problem as you all. I've got a Samsung Galaxy S with Android 2.3.3 on it and a keyboard which identifies itself as "Bluetooth mini Keyboard" (cheap from ebay). It works as it should, but there's this annoying mouse pointer in the middle of the screen and I have no idea how to disable it -.-
I guess I'm just going to have to invest in a decent keyboard/controller until this issue is resolved, does anyone know of any good ones specifically for NES and PS1 emulators and the like
I've fixed this now, if anyone is having the same problem I noticed the mouse does not appear when using the Exynos Extreme ROM.
hyper0105 said:
I've fixed this now, if anyone is having the same problem I noticed the mouse does not appear when using the Exynos Extreme ROM.
Click to expand...
Click to collapse
Great to hear that there is a fix for this...
But as that ROM is for SGS2 owners I just wounder if anyone got
rid of this issue on a SG I9000?
Would be great with an easier fix than flashing with a specific ROM,
evnt though I think I'll do that if that's the only route to go!
(running DarkyROM 10.2EEF ATM)
Thanks in advance!
/Gustav
Apparently the mouse pointer is hard coded with samsung roms. There are a few non-samsung roms out there that have a pointer.png in the framework.apk that could be edited, but unfortunately samsung roms do not have this png. I've scoured several apk's in the system folder and none of them have it. I've also searched and installed every possible app in the market that may have been able to move the pointer, but none of them worked. They were mostly wifi apps to control a PC mouse.
I've been trying to resolve this issue for weeks and have come to the conclusion that no one knows or cares to take the time to figure it out. I even got in a fight with someone because he felt I was the only one with this issue and was complaining that there wasn't a fix.
There's a bunch of bt keyboards out there that cause the mouse pointer to appear, so there's a strong chance that someone with some technical skill will be able to resolve it someday...probably after the "official" gingerbread release. In the meantime, try to find the cheapest bt mouse you can get your hands on and move it out of the way.

[Q] - Ca-Fi Android Car Stereo

Does anyone have the Ca-Fi Android car stereo? It seems it was recently released. I really want one, and will probably get one.
ca-fi.com/en/
Im debating on ordering one too.... though they list a 800mhz and a 1.2ghz version. Seems the 800mhz version is the only one available
Wish XDA would make a section for it and some custom **** was done with it!
total junk. save your money
I got one yesterday and installed it. Save your money. Its total junk. Was definatelu rushed to market.
No android market (yes you read that right)
Navigation requires data connection either through hsdpa gsm 3g or wifi (meaning you have to provide data for navigation to work at all)
Voice navigation doesnt work (it asks you to install additional files via the market, which again doesnt exist so it fails)
Every time i start the unit it goes to fm radio even when i dont want it to. Force closing the radio app does nothing.
The list goes on and on and on. NEVER AGAIN
shassouneh said:
I got one yesterday and installed it. Save your money. Its total junk. Was definatelu rushed to market.
No android market (yes you read that right)
Navigation requires data connection either through hsdpa gsm 3g or wifi (meaning you have to provide data for navigation to work at all)
Voice navigation doesnt work (it asks you to install additional files via the market, which again doesnt exist so it fails)
Every time i start the unit it goes to fm radio even when i dont want it to. Force closing the radio app does nothing.
The list goes on and on and on. NEVER AGAIN
Click to expand...
Click to collapse
Oh that's disappointing. I'm still considering buying one, just to see if I can root it, and fix some of the problems that you listed.
Xitdis said:
Oh that's disappointing. I'm still considering buying one, just to see if I can root it, and fix some of the problems that you listed.
Click to expand...
Click to collapse
I actually thkught about that too. Problem is you really cant connect it to a pc so any rooting work woukd have to be done via microsd card and run natively in 2.2. Not only that even if you root it theres no gurantee the android market would be installed as the "default" market. This means the voice navigation may never be solved.
Long story short, i am veey disappointed. :-(
that unfortunately, I wanted one for my birthday
shassouneh said:
I actually thkught about that too. Problem is you really cant connect it to a pc so any rooting work woukd have to be done via microsd card and run natively in 2.2. Not only that even if you root it theres no gurantee the android market would be installed as the "default" market. This means the voice navigation may never be solved.
Long story short, i am veey disappointed. :-(
Click to expand...
Click to collapse
Doesn't it have a USB port on it?
I made the same mistake of purchasing one. I have been unsuccessful in trying to root it. Z4 will just freeze the device requiring a power cycle. I attempted to connect via USB but did not have any luck using this method either. The problem is that the radio runs both USB ports in Host mode. This keeps it from showing up as a device when you connect it to a computer. I have tried both the front and rear ports with Windows and Linux.
I did manage to get the Android Market app installed. It took a good bit of work and involved copying the Google apps including first boot to an SDcard and sideloading them. The first boot app did break my home button, it currently does nothing and I can't figure out how to re associate it with the launcher.
Once I was able to connect my Google account, I was able to sideload the market apk. Of course, this required working wifi. The dumb device is configured for wifi using a wpa_supplicant file which specifies that 802.1x authentication is required. Seeing as I'm not using this on my wifi, I needed an app called wifi fixer to override this setting. I also needed to setup an unsecured wireless network because I couldn't get wifi-fixer to connect to a wep or wpa network. Once connected, the wireless was very spotty but worked long enough for what I needed.
After all this was completed, I was able to download an offline navigation app, copilot live, that would allow me to use the device as a nav while I wasn't sitting in the driveway connected to the wifi. I did try connecting to my rooted DroidX with CM7 using wifi tether but could not get the radio to complete the connection.
As shassouneh pointed out, it boots into FM Radio every time its powered on. This allows it to start playing music quickly, but is very annoying. I typically stream music from my phone over bluetooth which requires the volume to be much louder than when listening to the FM Radio. When you start the vehicle, the volume is remembered and will be deafening. The FM radio application is very buggy and it will take several attempts to save your radio presets with an acceptable name. It tries to use the digitally broadcast station information as the preset name, but often it just returns garbage. After trying some twenty times, I was able to get most of my presets to read the frequency and the FCC station name. (ex. 93.1 WPOC).
The touch screen is very disappointing. It's a low-quality restive type which requires that you touch below the point you're aiming for. This makes getting to buttons at the very bottom of the screen a challenge. I tried calibrating the screen, but was sent into and endless loop of touching the cross-hairs...
The "Phone" app has all the bluetooth configuration including pairing, contacts, music, etc. it is very rudimentary. The radio frequently fails to connect to my phone on its own and needs to be forced to connect. Sometimes the play button will start the phone playing music and other times it won't. I haven't found a rhyme or reason for it yet. It doesn't support AVRCP and as such you get three buttons when streaming music over bluetooth: Previous, Play/Pause, and Next. There's no indication of which song is playing nor is there any way to browse the music on the phone from the radio.
Overall, the device is absolutely terrible. Perhaps if I could root it, I could fix a number of its annoying characteristics and it wouldn't be so bad. I was most disappointed by the poor wifi and the FM radio at boot. There is such potential here to make an awesome device... Do not waste your money on this piece of garbage no matter how tempting it may be.
Bought one also !!!
I discovered that the product seems to be sold has with another brand :
http://www.ekoore.com/web/en/product/car-hi-fi-2/elija-2/overview-6.html
The point is that they are providing an update.zip containing files and probably could be used for rooting the device. Found the link http://www.ekoore.it/download/elija/update.zip in the italian forum.
From what I understood, this is a 2.3 device ...
Confirmed mine is 2.3.3
Tried several rooting tools (Z4, GingerBreak, Visonnary+, Universal Androot ...) none of these are working.
Wasn't able to dump the rom (no ADB, used terminal with RomDump V7.2) but found that there is a physical switch inside the box. I can have a message displayed "No signal received", just by starting the device while the switch is pressed. Didn't manage to konow if this is bootloader mode or not.
Found a Quick Start guide explaining how to build kernel and so on http://wendang.baidu.com/view/6545cb13a216147917112879.html
Chip TC8900 seems to be used widely for several chinese tablets. So rooting shouldn't be as difficult as it seems. My guess is that the only way to have it rooted is to modify the update.zip above....but I don't know how to do it !!
From what I understood, the radio, BT etc ... parts are not running Android and are something completely different. The only way to switch to an android environment is to go to navigate mode.
Guys,
I'm surprised, I've had this installed in my car for a couple months now and it works great and I do use it daily and thoroughly.
I have installed Android market (couple of minutes, easy to do), have my email, contacts, everything setup, I even get auto updates for installed apps
Bluetooth pairing with both my HD2's works flawlessly and synced all contacts from both phones
The dedicated iPod interface works great with my 160Gb iPod, I have a USB hub in the glovebox with a 2.5" HDD , WiFi dongle and 3g dongle all connected in.
Navigation doesn't require a data connection, I have a several different SatNav apps installed - some online and some offline, but I stick with Waze as I like it..., Waze unfortunately starts up in portrait but that's easily sorted with a press of the home key and Waze also puts up a single warning about battery being flat, but there's no battery, so what would you expect.....
can also listen to good quality internet radio on the move
If you buy a device like this, you've gotta expect a data connection to be required for initial setup of your apps and how you want them, I've run the device without internet, through my phone and through a 3g dongle.
It works properly and reliably with my original steering wheel controls and the way it sets this up is the best I've seen on a in car device and simplicity itself.
It also boots to the last source being played, in my case normally iPod, but if the iPod etc is missing, then it will default to the radio.
The touchscreen isn't the best in the world, but is very useable, if the alignment is out then recalibrate it by holding the back button until the calibration screen appears..
Only thing I really don't like is if you burn some mp3's to a cd/dvd, they play through the dvd interface, not through the android media players.
I genuinely like the unit, it's a nice toy to have in the car and has no more issues than any other android device I've used...
J
Should say that the FM quality is really awful ! Can't even get the RDS working ...
French translation is missing sereval items (or completly false). Got the wifi + market without too much trouble. The touchscreen is usable.
I definitely love to have it rooted
Xitdis said:
Does anyone have the Ca-Fi Android car stereo? It seems it was recently released. I really want one, and will probably get one.
ca-fi.com/en/
Click to expand...
Click to collapse
I've got that stuff from their dealer in Russia, I think juliabrothers.net
Cool device. I loved it sound quality, pure, very sharp image. Very quick response. Yes, the touch screen isn't as good as we used to have on smart phones. Still works o.k. Just look at others DVD player made on Windows CE6.0 platform. They ain't better in anyway.
---------- Post added at 04:37 PM ---------- Previous post was at 04:33 PM ----------
naboleo said:
Should say that the FM quality is really awful ! Can't even get the RDS working ...
French translation is missing sereval items (or completly false). Got the wifi + market without too much trouble. The touchscreen is usable.
I definitely love to have it rooted
Click to expand...
Click to collapse
Could you please give me a hint how you manage to install Market on that thing?
Still working on it. Which Android version do you have? I have 2.2
You see, Android Market which built for smart phones doesn't work very well for CAR stereo devices. That Market doesn't differentiate between "good" and harmful applications, which can shut down your system forever.
Remember most of software designed for smart phones doesn't work under CA-FI platforms. Supplier said so, I 'd be happy to be wrong.....
---------- Post added at 06:25 PM ---------- Previous post was at 05:39 PM ----------
naboleo said:
Confirmed mine is 2.3.3
Tried several rooting tools (Z4, GingerBreak, Visonnary+, Universal Androot ...) none of these are working.
Wasn't able to dump the rom (no ADB, used terminal with RomDump V7.2) but found that there is a physical switch inside the box. I can have a message displayed "No signal received", just by starting the device while the switch is pressed. Didn't manage to konow if this is bootloader mode or not.
Found a Quick Start guide explaining how to build kernel and so on
Chip TC8900 seems to be used widely for several chinese tablets. So rooting shouldn't be as difficult as it seems. My guess is that the only way to have it rooted is to modify the update.zip above....but I don't know how to do it !!
From what I understood, the radio, BT etc ... parts are not running Android and are something completely different. The only way to switch to an android environment is to go to navigate mode.
Click to expand...
Click to collapse
Is that possible to use that manual for building a kernel, which could be used instead of pre-installed software? Seems interesting. Any thoughts?
Market came from the 2.3.3 build already installed on device. You probably can try the apk within the update archive http://www.ekoore.it/download/elija/update.zip . As the italian website is quite slow i extracted it. From what i understood update seems to not working on all devices.
Regarding the manual, of course I was thinking it could help for anything like root, recovery image or enabling adb. But honestly i don't have enough knowledge to do myself.
Hi Everyone, just found this thread. I have this unit as well and have been building info on the MP3car site about it, overall i'm happy with the unit although i haven't been able to do everything i want to it.
The audio quality for me is good and i can tether data off of my phone to play internet radio and navigate through waze or otherwise. I'd definately like to see some development in this area myself as there are some welcome improvements to be made. i've sideloaded the market but was never able to update it. the player will default to the last built in media that was played when it shuts down and there seems to be several volume streams built in, i've heard people haven't been able to adjust these with volume apps.
here is the MP3car thread: http://www.mp3car.com/android-tablet/150109-innotrends-ca-fi-on-order-will-review.html
Upon request, here is the update zip from the italian forum. Rename from update.zip to elira-update.zip
elija-update.html
I recently purchased and installed the Ca-Fi "Universal" 620 to replace my JVC head unit that died after 5 years. Because there isn't much information out there about this product, not even from the manufacture, I thought I'd provide the good and bad from an audiophiles perspective(...and I only coin the term audiophile because I have a full on sound system in my car, not because I'm into the lossless debates and all that BS).
The Bad (or the ugly):
-Has an individual RCA jack for subwoofer output. (left/right(white/black, red) is pretty standard. Now I have to buy a sum'er to join the channels. What if I had two subs running left and right channels of bass...I'd be up a creek and would have to buy splitter then a line driver...blah come on.
-Although there is individual subwoofer level control there is no subwoofer (low) frequency control. So, my lows that run to my subwoofer are the lows that will run to my speakers and I can’t do this cause my front stage was meant for highs and mids.
-The Graphic EQ, although having 10+ frequency to set they provide automatic roll off of nearby frequencies so, it's hard to fine tune.If you’re going to give me that many frequencies then please let me control each one of them.
-The balance controls (and all other touch screen sliders)were OK but, they sorely need increase/decrease buttons (i.e. “+” and “-“). Trying to configure a good sound stage is hard with resistive touch screen sliders.
-The P.CNTL (I assume Power Control, again no documentation) is switched off and on when you change sources (or I think actually when no sound is “sensed”) whaa? So now, because my amps have delayed starts, each time I switch a source (or Pandora even buffers a new song) the relay power drops to my amps and I have to wait for my amps to power up again. Not to mention the pops because of the high current switching on and off..man. So now I have to find an off delay relay so my amps don't turn off when I change the source. Now I could very well be the idiot on this one and need to use the P.ANT (I assume power antenna) but, the reason I didn’t is because P.ANT is solid blue wire, whereas P.CNTRL is a blue with white strip which is more industry standard for relay control.
-The boot up source is always going to the Radio. I read some other folks already discuss that here and there but, come on, really, you can't just remember the last source I had.
-Bluetooth (or lack thereof) yes, it will play your music from your phone (in my case HTC Sensation) but, that's about it. If I want to change an artist or song or whatever I have to do it from my phone. I thought it would have this to make me a safer driver so I don't have to look/mess with my phone to get new songs, guess that's what I get for assuming?
-Auto screen Dimmer doesn't work or isn't that great cause I still have to manually dim the screen at night.
-Resistive touchscreen I gotta hammer the screen to push buttons. Each push takes my attention away from the road, no bueno!
-Wifi doesn't support WEP or WPA no biggie since I'm driving and I don't think hackers do drive by hackings (or do they?). But, still sucks cause when I use it at the airport I have to turn it back on. Just a nuisance but, wifi WILL tether (provided you buy the additional USB Wifi Adapter).
-Some Apps don't recognize my wifi connection and thus will not work. Case in point, Google Maps. wft! the whole reason I got the thing was to wifi tether with my phone and control goolge maps from ca-fi. Nope can't do it. booo.
-Double DIN – not really. I don’t know what standards they followed but, my original brackets from my original Double DIN HU (head unit) didn’t work. The unit sticks out so far my radio door won’t close and there’s a gap of about .25 inches on both sides. No install kits will work with this because it’s not truly a standard Double DIN.
The Good
-The bluetooth phone capabilities work good. Contact list is ok. Of course it sucks for me because of the whole P.CNTRL thing. Yes, when I switch to Phone it turns off and on my amps…grrr.
-Mini SD card slots and a miniUSB port in front, very nice/convenient.
-System isn’t as slow as one might think for such a “slow” processor. My HTC Sensation runs circles around this thing ;p.
-Nice interface for the radio.
-You can run Apps. Although a lot of them crash (i.e. Force Close) every now and then for no apparent reason.
-Pandora works (with wifi tether) very nicely.
-Push button (knob) for mute and knob volume control.
….that’s all I’ve got for now but, so far the goods don’t out weight the bads so, I’m not happy with regards to the amount of money I spent vs. what I’m getting vs. what actually works. I’m not upset because I went into this fully knowing I was going to be a guinea pig but, if you’re a music first, apps and other **** second, kind of person like me steer clear my friends.
Not that any manufacture ever cares or even reacts to forum post, I’m going to try and communicate this to the manufacture and hopefully see if a) they’re aware of these issues and b)if they plan to release fixes/patches to help their “new adopters” out. Don’t get me wrong this company has a great product and great idea but, they’re seriously mistaken if they think they can compete with the big boys (Android Apps or no Android Apps).
What do jou Guys/girls think about this product....... http://www.chinavasion.com/2-din-ca...chable-android-23-tablet-panel-wifi-gps-dvbt/
I find it very interesting

Samsung Sidesync 3.0

I just heard about this and it was free so decided to try it out...but I have no idea how to control my phone when it's on my pc screen. I can click the hard buttosn that it displays on the GUI but anything on the phone screen itself (displayed on the PC), it only has the big blue circle that does nothing when I click except pulse a bit telling me I clicked here.
Also, the description was a bit confusing but when they said use the phone as a second monitor..I can't extent my PC Windows as a dual screen, right? Just meaning I can use both devices simultaneously with a single KB/M set??
edit:
seems like it responds to Key Board but not the Mouse. Also with Keyboard, I can't siwtch back the Window to 1 and 5 out of 5, only between 2 3 4? If I keep pushing Left or Right it finally goes. Int he App Drawer Page...I have no idea how to scroll up and down to choose something else that's not in my PoV
djricekcn said:
I just heard about this and it was free so decided to try it out...but I have no idea how to control my phone when it's on my pc screen. I can click the hard buttosn that it displays on the GUI but anything on the phone screen itself (displayed on the PC), it only has the big blue circle that does nothing when I click except pulse a bit telling me I clicked here.
Also, the description was a bit confusing but when they said use the phone as a second monitor..I can't extent my PC Windows as a dual screen, right? Just meaning I can use both devices simultaneously with a single KB/M set??
edit:
seems like it responds to Key Board but not the Mouse. Also with Keyboard, I can't siwtch back the Window to 1 and 5 out of 5, only between 2 3 4? If I keep pushing Left or Right it finally goes. Int he App Drawer Page...I have no idea how to scroll up and down to choose something else that's not in my PoV
Click to expand...
Click to collapse
no one knows about Sidesync or am i explaining it bad? Long story short, I want to be able to use my KB/M with the phone display on the pc screen
I will test it tomorrow
T-Mobile Galaxy S5
i still can't get it to work properly on 4 different' PCs.=(
Sorry for the delay, I'm installing on my pc now.
T-Mobile Galaxy S5
working fine here, using WINDOWS 8.
keyboard and mouse clicks.
:cyclops:
i also connected to sidesync via wifi, no problem.
have you figured it out yet? what OS is installed on your pc ?
I have used it for months and works great.
Sent from my SM-G900T using XDA Free mobile app
what can be the reason that the mouse click (left mainly) not accepting?
Same
I'm having the same problem with my laptop and Sidesync on my Galaxy s 5. I've tried it on my tablet too and its also having this problem. Has anyone found a solution?

Ulefone Armor 2

Hi all,
Recently got myself a Ulefone Armor 2. The device is not too bad so far. I switched to it after cracking my Power2's screen multiple times. It comes with a stupidly basic Android 7. So I just wanted to start a thread to see if anyone's got their hands on it and started hacking around. See the bookmarks below for all things customisation.
I've edited this first post multiple times to reflect the recent developments. Some people got root & Magisk working see links after my first remarks:
About the latest Software Update (aka 20180224_s21v57c2k_gq_fp or S21 GQ3037LF2 Ulefone V12 20171009-Update 20180224):
alpsayin said:
Nope, it's not the same. Something is fundamentally off with this ROM. Accessibility services get turned off automatically every time screen goes off. Half the background apps are killed every time screen stays off for a minute too. I've already reverted back to what I had before. I suggest stay away from this build.
Click to expand...
Click to collapse
If you've updated your phone to latest ROM use the below instructions to revert back but use https://www.needrom.com/wp-content/uploads/2017/11/S21_GQ3037LF2_Ulefone_V12_20171009.zip instead of the latest one:
[/U]https://forum.xda-developers.com/showpost.php?p=74294320&postcount=31
First remarks:
-Some people and I are having problems with USB-C headphone adapter (https://forum.xda-developers.com/android/help/ulefone-armor-2-t3684566/post74367962#post74367962)
-Device bluetooth volume level is separate from the headset's volume. (EDIT: fixed with recent ROM update)
-Adaptive brightness might be a tad bit aggressive in my opinion so I switched it off. (EDIT: less aggressive with recent ROM update)
-Android Pay does NOT work. It says device is not verified (which is sad, I really wanted this to work). (EDIT: works now with also recent ROM update).
-Camera button launches a camera app if you press for 5 seconds only. Useful to trigger underwater.
-SOS button needs 5 seconds push to start calling emergency contacts, but even then it causes a lot of pocket dialling.
-PTT button only works inside the Zello app. Kinda wish these buttons could be reassigned for other things (EDIT: see this reply https://forum.xda-developers.com/showpost.php?p=74451451&postcount=78).
-Generally buttons are easy to push, i change the volume every time I put the phone in my pocket, then again i might just need to get used to having a brick with 4g.
-Speakers are not great, but it's indeed waterproof. Took it into shower and gave it a good abuse.
-Fingerprint sensor is a bit annoying at times but I believe this might be because I was sent a phone with improperly attached screen protector. (EDIT: it was the badly aligned screen protector)
-Power menu doesn't have the shortcut to the power saving mode that I like so much
-Be gentle with your USB-C cap, mine broke. It's still waterproof, but now it's pretty easy to lose the cap.
-If you wanna save some serious battery, disable Google App data backup (App backup&restore).
-Sports mode in battery settings will make the phone "snappier" probably at the expense of battery life.
BOOKMARKS:
ROM Stuff (some need TWRP)
See this reply for instructions to update to recent ROM:
https://forum.xda-developers.com/showpost.php?p=74294320&postcount=31
TWRP Flashable Stock ROM with Magisk Root (Android Pay working, Buttons disabled, needs opengapps)
https://forum.xda-developers.com/showpost.php?p=74749806&postcount=174
Restore or write IMEI numbers:
https://forum.xda-developers.com/showpost.php?p=74450547&postcount=76
TWRP
See these replies for root and TWRP (v1, legacy):
https://forum.xda-developers.com/showpost.php?p=74399450&postcount=60
https://forum.xda-developers.com/showpost.php?p=74429860&postcount=68
See these replies for TWRP without OTG and root (v2, now also legacy):
https://forum.xda-developers.com/showpost.php?p=74488885&postcount=96
https://forum.xda-developers.com/showpost.php?p=74490010&postcount=97
English TWRP in zip and img formats, also something about Forced Encryption (v3, but also follow instructions from v2)
https://forum.xda-developers.com/showpost.php?p=75544568&postcount=281
Magisk and Root
Summary of SuperSU, Magisk, Xposed and Android Pay compatibilities:
https://forum.xda-developers.com/showpost.php?p=74580626&postcount=135
Magisk Installation (legacy, but use it for instructions):
https://forum.xda-developers.com/showpost.php?p=74472235&postcount=89
Latest Magisk (permissive, hidelist persists, allowing module installation, yay!):
https://forum.xda-developers.com/showpost.php?p=75803660&postcount=299
Re-flashing STOCK ROM and/or updating Magisk while keeping data (requires TWRP)
https://forum.xda-developers.com/showpost.php?p=75064226&postcount=223
Audio Issues
Fix for Armor 2 Bluetooth Disconnect Issue
https://forum.xda-developers.com/showpost.php?p=75461843&postcount=279
Audio not routing through or unstable USB-C headphone jack?
https://forum.xda-developers.com/android/help/ulefone-armor-2-t3684566/post74621805#post74621805
Tweaks (Buttons, Persistent Notifications)
How to disable default PTT & SOS functions and replace functionalities (requires ROOT):
https://forum.xda-developers.com/showpost.php?p=74445439&postcount=72
How to get rid of Persistent NFC notification
https://forum.xda-developers.com/showpost.php?p=75049379&postcount=216
Fingerprint scanner is NOT SECURE
https://forum.xda-developers.com/showpost.php?p=75796254&postcount=297
Credits: @sumec100 @djvinniev77 @enzovic @Sebastl @jemmini (? from 4pda.ru) @TuksOID @sargon__
Have you had any software issues and can you assign anything else other than emergency contacts to the SOS button? I have an LG X Power with a cracked screen and have been looking into this phone because the doogee s60 and bv8000 pro both show problems and I don't feel like spending 600 for a cat s60 or s41
Sent from my LG-K450 using XDA-Developers Legacy app
Wish there was a way I could disable the sos button on my doogee s60
Hi,
i got mine a week ago, and i think this phone is really great so far. Only thing i'm missing is a way to root it, i have tried everything i could find, but nothing has worked so far.
Tommy
I really wanted to like this phone, but Bluetooth is essencial to me, and I cant keep a Bluetooth audio connection constant with out disconnects and connects randomly, is very frustrating, I was expecting a better quality of the audio of the internal speaker when making calls, the holes of the back speaker one is a dummy the is no sound from it, and battery is good but not so good for the capacity, I was expecting more, and the camera is really sub par with a slow auto focus. I why didn't they make the screws of the sim compartment flush with case, was so simple.
fluis70 said:
I really wanted to like this phone, but Bluetooth is essencial to me, and I cant keep a Bluetooth audio connection constant with out disconnects and connects randomly, is very frustrating, I was expecting a better quality of the audio of the internal speaker when making calls, the holes of the back speaker one is a dummy the is no sound from it, and battery is good but not so good for the capacity, I was expecting more, and the camera is really sub par with a slow auto focus. I why didn't they make the screws of the sim compartment flush with case, was so simple.
Click to expand...
Click to collapse
I just tested the Bluetooth on a speaker, i had no issues with it. As for the battery, there is a lot of settings you can tweak, and turn off all of the Google draining apps. I have installed Greenify too.
Camera is not the best, but it does the job. We get what we pay for, and for that price i cannot expect to get a better phone, that probably would survive a nuclear war lol
tmiland said:
I just tested the Bluetooth on a speaker, i had no issues with it. As for the battery, there is a lot of settings you can tweak, and turn off all of the Google draining apps. I have installed Greenify too.
Camera is not the best, but it does the job. We get what we pay for, and for that price i cannot expect to get a better phone, that probably would survive a nuclear war lol
Click to expand...
Click to collapse
I'm glad that you having a better experience with Bluetooth, I do hope that I can solve my problems with it.
I also just bought an Armor 2, and I also want to be able to configure the ptt and sos buttons in a better way. I hope people who know about this give us a hand. regards
I can assign emergency contacts to SOS button. Multiple ones in fact; if first person doesn't answer automatically calls the next one and so on. I was just curious to give them other functionalities, such as launching apps.
tony442 said:
Have you had any software issues and can you assign anything else other than emergency contacts to the SOS button? I have an LG X Power with a cracked screen and have been looking into this phone because the doogee s60 and bv8000 pro both show problems and I don't feel like spending 600 for a cat s60 or s41
Sent from my LG-K450 using XDA-Developers Legacy app
Click to expand...
Click to collapse
Did anyone manage to get Android Pay working? Android Pay doesn't verify the android, I was really looking forward to being able to use it...
I just got mine, love it for the price but unfortunately didn't read about android pay. I just tried and yep, no good to add payment cards. If you have a banking app that accepts card integration, it works that way, so it's just android pay/Google security.
Now, has anyone tried downloading the latest official ROM from needrom? They cite one from 10/9, I tried to install after ensuring the device is properly detected and the process fails. Something about Brom incompatible.
Not sure if anyone here has had successes with flashing MediaTek based devices, any tips?
djvinniev77 said:
I just got mine, love it for the price but unfortunately didn't read about android pay. I just tried and yep, no good to add payment cards. If you have a banking app that accepts card integration, it works that way, so it's just android pay/Google security.
Now, has anyone tried downloading the latest official ROM from needrom? They cite one from 10/9, I tried to install after ensuring the device is properly detected and the process fails. Something about Brom incompatible.
Not sure if anyone here has had successes with flashing MediaTek based devices, any tips?
Click to expand...
Click to collapse
Well, I was using a ulefone power 2 before this one. SP Flash tool version >5 works great. You just need to make sure device is fully powered off and connect usb cable. It might get into a bootloop, but if you start the flashing process while it's off it will get off of the bootloop and flash it. Hopefully at least.
I am using TSB, Santander, and nationwide. I guess none of them has card integration?
I'm searching a custom-Rom (lineageOS) for Armor 2. This Link ( rootmygalaxy[dot]net/lineage-os-15-for-ulefone-armor-2/) says "download it", but I can't found the Rom.
If I would self-compile it. Where I can find the driver for Armor 2?
With regards to android pay, I emailed ulefone support and they noted that they are working on it, need to get the keys to fix. They asked for device IMEI and will try to make the update via OTA. You can email them from their website. Looking at 3 weeks but I'm not counting on it. At least someone replied right away.
djvinniev77 said:
I just got mine, love it for the price but unfortunately didn't read about android pay. I just tried and yep, no good to add payment cards. If you have a banking app that accepts card integration, it works that way, so it's just android pay/Google security.
Now, has anyone tried downloading the latest official ROM from needrom? They cite one from 10/9, I tried to install after ensuring the device is properly detected and the process fails. Something about Brom incompatible.
Not sure if anyone here has had successes with flashing MediaTek based devices, any tips?
Click to expand...
Click to collapse
i installed the last room (nedroom) yesterday and was ok ok, i had a problem with connecting the usb (did not want to run the download process), helped "volume up" ON , the phone off, and then connect the usb to the pc and when I started process the "volume up" OFF , it started Mint 18.2 cinnamon 64-bit, SP_Flash_Tool_v5.1728_Linux - run as root , the MTKxxxx driver setting, for linux is here on XDA.
I would also be happy for recovery and root for armor 2.
with greetings of sumec.
sumec100 said:
i installed the last room (nedroom) yesterday and was ok ok, i had a problem with connecting the usb (did not want to run the download process), helped "volume up" ON , the phone off, and then connect the usb to the pc and when I started process the "volume up" OFF , it started Mint 18.2 cinnamon 64-bit, SP_Flash_Tool_v5.1728_Linux - run as root , the MTKxxxx driver setting, for linux is here on XDA.
I would also be happy for recovery and root for armor 2.
with greetings of sumec.
Click to expand...
Click to collapse
Nice. Did you wipe everything or was it an in place update that retained your data?
djvinniev77 said:
Nice. Did you wipe everything or was it an in place update that retained your data?
Click to expand...
Click to collapse
I deleted everything like a new phone. If you have a backup date so when you start offering a recovery from a backup or as a new phone. Every update to rom through flashtool makes full wipe data, so it's a good root and recovery.
Is there any way of disabling that wretched camera button ? I am fed up with clicking noises from my pocket as it takes shots, and deleting them all afterwards....
Gnubi said:
Wish there was a way I could disable the sos button on my doogee s60
Click to expand...
Click to collapse
I use the APP "Button Mapper" Ver: 0.54 Free
You can reconfigure PTT and SOS buttons to open your desired Apps.
You can also disable operation with the Lock-screen
My actual configuration for PTT button is:
Short press: Nothing,
Long press WhatsApp,
Double press: switch between DND, Vibrate and Outdoor sound mode
and for SOS:
Short press: Nothing,
Long press: PayPal
Double press: Shazam
wilkofife said:
Is there any way of disabling that wretched camera button ? I am fed up with clicking noises from my pocket as it takes shots, and deleting them all afterwards....
Click to expand...
Click to collapse
Camera button requires pro version, but I can live without it :good:
I noticed today that my USB-C to headphone jack cable is not working. Anyone else had that problem?
Also, ButtonMapper works great but sometimes it causes a soft reboot...

Categories

Resources