I have issues when using DOOM to root my phone.
First off, to correctly connect the phone to the computer you have to go to "WIRELESS >>> USB >>> CONNECT TO PC. Now, if you have already checked the box to enable USB DEBUGGING another box comes up and says that you have to DISABLE usb debugging in order to use the "connect to PC" function. how the hell do you get around that? even when you connect to PC you get MTP initilization in the notification bar. When you pull down and click on it, it simply shuts the bar....... you cannot select anything.
Any ideas anybody?
There is a separate forum for the ATT Note..
Sent from my Galaxy Nexus using xda premium
http://forum.xda-developers.com/showthread.php?t=1504218
Go there for the 717 Root Method
Related
Hi.
Just bought Galaxy Ace for my daughter and faced with the same problem. it's at official 2.3.3 firmware, and each time i connect it to PC via USB - it enables the USB debugging. I tried disabling it in Settings->Application->Development when phone is disconnected - no luck.
Strange, but i don't see a "USB connection" option in Settings->Wireless and networks... it's there on my Galaxy S thou... May it be an issue with Ace's official firmware?
Update: flashed VillainROM-1.0 and still having same problem.
korvin1980 said:
Hi.
Just bought Galaxy Ace for my daughter and faced with the same problem. it's at official 2.3.3 firmware, and each time i connect it to PC via USB - it enables the USB debugging. I tried disabling it in Settings->Application->Development when phone is disconnected - no luck.
Strange, but i don't see a "USB connection" option in Settings->Wireless and networks... it's there on my Galaxy S thou... May it be an issue with Ace's official firmware?
Update: flashed VillainROM-1.0 and still having same problem.
Click to expand...
Click to collapse
It's in Settings > Applications > Development .
Sent from my Ultima Weapon using XDA App
EmoBoiix3 said:
It's in Settings > Applications > Development .
Click to expand...
Click to collapse
There's only a "USB Debugging" option, which, being disabled, gets automatically enabled again each time i connect the phone to a USB cable.
So what is the problem if it's enable? And Ace don't have "USB connection" option in Settings
Sorry, I thought it's obvious: with USB debugging always enabled - I've no possibility to connect the phone to PC as a disk storage or to connect it to Kies/PC_Suite
learn to know your phone
korvin1980 said:
Sorry, I thought it's obvious: with USB debugging always enabled - I've no possibility to connect the phone to PC as a disk storage or to connect it to Kies/PC_Suite
Click to expand...
Click to collapse
NO, is not obvious. USB debuggins doesn't botter your usb connection at all since you hace to activate the disk storage after you connect your SGA. Look on status, there's a message that tells you that you have to click there to activate mass storage. And on the other hand, KIES recognizes SGA after a few minutes, just wait a little longer.
i have the same problem. mass storage only works if you have the samsung drivers installed. if you connect the phone to a different PC that dosent have the samsung drivers it will not recognize it. if you disable Debugging so that the computer would detect it as a mass storage, once you connect it, it automatically enables debugging again. if you disable it while connected, it goes back on automatically.
i'm running 2.2.6 but i've always had this problem since 2.2
using windows 7
anyone can help?
USB mass storage worked fine for me on multiple computers without the drivers installed and with debugging on. There is no reason why either of those things would influence your connection. The problem is far more likely to be with either your computers settings or your usb hardware.
i tried on a few different computers, same problem. i guess i'm stuck :/
thanks anyway
dali47 said:
i tried on a few different computers, same problem. i guess i'm stuck :/
thanks anyway
Click to expand...
Click to collapse
Windows XP is fine. Windows 7 is very fussy: m.androidcentral.com/android-101-copy-files-your-storage-card-windows
Hello all ,
I am new here , I spent time and time try to read how to root my new SG2 (ATT) .... I had 1 problem and can't figure out why that my pc does not recognize the phone ...I download the kies and driver from samsung and it's still not recognize the phone .
Please help .
Thanks .
p/s I came from Iphone 4 and JB unlock iphone from 3g,3gs,4g ....I just switch to Samsung Android 3 day ago .... 1 thing I for sure that SG2 killed iphone 4 ....don't know about iphone 4s yet .
Make sure dev mode is enabled under USB
Is that : setting >dev>USb debug checked ?
It's checked at that mode .
The kies air work fine .....just the pc connect didn't work
I think my problem is may be windows version ....my is 32bit ...so I have to find another comp with win 7-64 bit and try it out .
Mine won't connect unless Dev mode is turned off. If its enabled Kies gives an error about not being able to connect in this mode.
You also won't see the phone on your PC when you plug in the USB, until you slide down App Drawer and tap USB Connected, then tap "Turn on USB Storage".
Got my work with PC ....just uncheck the USB debugging before connect to PC .
i also had the exact same problem today, if usb debug was enabled, the pc would not recognize the phone. Once usb debug was disabled, the phone appeared in file explorer. FYI i did not try to slide down the status panel at the top so im not sure if that is how you do it when usb debugging is enabled.
Sent from my SAMSUNG-SGH-I777 using XDA App
Hi Folks, I rooted my GN a few days ago with no problem. Now that I want to flash a Recovery to Install a ROM the computer don't recognize the phone. I have tried a few methods that I saw online with no results.
Looking for some help! Thanks in advance!
On a Windows machine go to Start/Control Panel/Windows Update. With the phone plugged directly to the PC, not a hub and click "check for updates". You might have to do this a few times and reboot, I did.
Odds are you tried this, but just in case....
USB Driver Not Being Recognized For SYNC
Following are my observations and possible steps to
5. solution lies in the phone
a. key in the dialer *#7284#
b. it has 4 option there..
UART (MODEM/PDA)
USB (MODEM/PDA)
c. For USB. select the PDA. If it already selected to PDA, reselect it by select MODEM and then PDA again.. Only change the USB setting.. and then press back. try reconnect.
6. The Laptop will start recognizing the required drivers and install them
also Phone is not recognized by laptop when it is in USB debug mode, MyPhoneExplorer does not recognize when it is not in Debug mode
aj_vogtman said:
On a Windows machine go to Start/Control Panel/Windows Update. With the phone plugged directly to the PC, not a hub and click "check for updates". You might have to do this a few times and reboot, I did.
Click to expand...
Click to collapse
aj, Im installing some updates now and I will tell u then the results!
Sent from my SAMSUNG-SGH-I717 using xda premium
enjoythemusic said:
Odds are you tried this, but just in case....
USB Driver Not Being Recognized For SYNC
Following are my observations and possible steps to
5. solution lies in the phone
a. key in the dialer *#7284#
b. it has 4 option there..
UART (MODEM/PDA)
USB (MODEM/PDA)
c. For USB. select the PDA. If it already selected to PDA, reselect it by select MODEM and then PDA again.. Only change the USB setting.. and then press back. try reconnect.
6. The Laptop will start recognizing the required drivers and install them
also Phone is not recognized by laptop when it is in USB debug mode, MyPhoneExplorer does not recognize when it is not in Debug mode
Click to expand...
Click to collapse
enjoythemusic, also I had tried this before and doesnt work for me. Thanks for your help. Im installing some updates now and will see if work if not will do this again over the updates!
Sent from my SAMSUNG-SGH-I717 using xda premium
I rooted the stock GB yesterday then flashed DAGr8's ICS rom with a ton of mods afterwards and mine is functioning fine.
I did notice a Samsung driver available as an optional install in Windows Updates. Is that the one you tried to install?
Hey guys today i got the samsung galaxy s2 gt-i9100 and the phone works fine but theres something weird happening and is that everytime i plug the phone to the computer it charges but it doesnt let me use the phone like a usb drive i cant acces my phone and in the notification bar it doesnt show the option to mount to usb, and if i put the phone in download mode odin does not recognize the device and everytime i plug the phone its says one of the usb devices attached to this computer has malfunctioned and windows does not recognize it.
Do you know what could it be? is this something than can be fix?
Before you can connect the phone via odin, you need to have the drivers installed. So first thing you need to do is have your computer detect the phone.
-See if the cable is working..if you have another cable, try your luck with that.
-clean the phone's USB port.
-try putting your phone into USB debuhging mode from the settings menu.
-Im assuming your still on stock. Dial *#7284# and on the USB option select PDA. This worked for me while I had trouble on stock.
Sent from my GT-I9100 using xda app-developers app
Heres my issue, when I plug the usb cable in it doesnt connect to the PC. it tries to connect but then Windows say its disconnected. For kicks I went in to RSD and it connected and was able to flash back to stock, (I was on stock but just rooted). I am fully stock now and still have the same issue. Does anyone have any suggestions? I have tried multiple cables and 2 different PC's.
Thanks for any help!
Does the usb menu come up on the phone? Select storage device.
Reinstall the drivers from Moto.
Google usbdeview.exe un install all moto drivers reboot computer. Plug phone in let computer reload all the drivers.
http://www.nirsoft.net/utils/usb_devices_view.html
Sent from my MB855 using xda premium
rbeavers said:
Does the usb menu come up on the phone? Select storage device.
Reinstall the drivers from Moto.
Google usbview.exe un install all moto drivers reboot computer. Plug phone in let computer reload all the drivers.
Sent from my MB855 using xda premium
Click to expand...
Click to collapse
Hi, thanks for the info I tried uninstalling and when I plug the phone in it pops up USB Connection then goes away and PC say Device unplugged, but phone will charge. Wondering if the port is bad.
In the notifications at the top does it show the USB icon. Can you open it to see the options?
rbeavers said:
In the notifications at the top does it show the USB icon. Can you open it to see the options?
Click to expand...
Click to collapse
i too have similar problem the rsd flash process fails in remuneration with windows prompting usb malfunctioned
i request to give a solution