I have two rezounds, just got the second one. I forgot to restore the stock recovery before doing the OTA, but it seems to have installed OK. However, when I go into Software Information screen, the PRI Version is older than the one on my first Rezound. Everything else is the same on both phones. Did the update fully install? Thanks!
Edit: Wifi isn't working...definitely think something may have went wrong.
Not all phones are on the same PRI. Mine did not change with the OTA, I'm still on an earlier version than some people. I've seen three different versions posted.
As to the wifi... try flashing the 2.x stock kernel from the OTA and see if that fixes it. You're still on stock ROM?
I wonder if different PRI could account for the variable battery drain people seem to be having?
Thanks guys. Wifi is working now and everything looks OK.
Related
All -
I apologize if this has been answered - I couldn't find a relevant post by searching...
I have HBOOT 1.50, am rooted, and am running Supra ROM 2.1. I've hit "update profile" and "update PRL" at least 3 or 4 times - and each say that they were updated and the changes applied - but the number never changes.
So - I have 2 questions:
1 - the phone says I have PRI 1.24_003 and PRL 21083 - are those current?
2 - assuming the answer to number one is no, how do I update them?
I should mention that the reason I'm trying to update those two (and I realize there is some debate whether or not it'd help) is because 3 times in the past 2 days, my phone has been sitting on my desk where I typically have 4-5 bars and all of a sudden I get a voicemail notification. The phone never rang. It's happened too many times in a short period to simply be an anomaly.
As always - any help is greatly appreciated -
That's the latest prl.. you're updated.
Sent from my PG86100 using xda premium
One last question then... As previously mentioned, I have Hboot 1.50. A few days ago, I flashed Supra 2.0 then 2.1 directly from TWRP recovery. I'm reading from several different places that I was supposed to flash them from ADB - is that accurate? In other words must *all* ROM flashes involve ADB if on hboot 1.50? Additionally, I didn't flash a kernel - I just assumed stock kernal was fine - is that not the case? And last: is it possible that a miss-flashed ROM is causing my phone-signal issues?
Okay that's like 4 questions.
I should point out that my phone *does* work insofar as it boots into android and can make/receive calls - all seems normal and functional - just the issue of a sudden voicemail with a phone that never rang.
well as for your prl it will say updated and whatever even if it doesn't actually look like it changes anything. it still writes the new prl. some roms work just fine with stock kernel. although it tends to mess up if they are different versions like having a 2.3.4 rom and have a 2.3.3 kernel. I am not sure about your rom you have flashed as I have not used it. the reason youbwould need and is for installing the kernel. I just use joeys app to flash my kernels tho.
Sometimes you have to update it manually to have the system register the change.
mybikegoes200 said:
I should point out that my phone *does* work insofar as it boots into android and can make/receive calls - all seems normal and functional - just the issue of a sudden voicemail with a phone that never rang.
Click to expand...
Click to collapse
Sorry to hijack the thread, but did you get this figured out on your phone? Mine is doing the exact same thing since recently updating to 2.17.651.5. I updated the radios at the same time -- I have the same PRI and PRL versions you mentioned in the first post. Thanks!
EDIT:
I used freeza's update which updated me from 1.24_003 to 1.42_003. Since then, I'm able to receive calls and text messages again. Posting here in case it helps someone else. I used the update found here: http://forum.xda-developers.com/showpost.php?p=21374142&postcount=131.
Hi,
Since ICS roms dropped for the EVO 3D GSM, I jumped on board.
As recommended I installed the fw upgrade, prior to flashing an ICS rom.
No problems so far.
I decided to do a speedtest on my connection. Seems my download speed was very low. Only about 10% of the speed I should have. (Speeds on wifi are just fine).
First I thought it might be the rom, so I tried another ICS rom (wiped and all). Still no decent speed.
Next step was to try a GB rom. This one also didn't give me the dl speed I should have.
I decided to flash the "older" recommended radio for GB roms. Again tried ICS and GB roms on top of that. Still no decent speed.
Doing this trial and error made me think that the possible "problem" is the newer fw I flashed for ICS. This fw upgrade holds more than just the radio.
To completely rule this out I want to install an older fw version.
I know I can "extract" the PG86IMG.zip from any compatible RUU and install that with the bootloader.
Questions:
1) Is it safe to 'downgrade' and install the firmware that way?
2) Is there any other thing I can do to get my normal dl speed?
I realise that if the software isn't to blame, then it might be hardeware or carrier related.
First I want to rule out the software part.
Thanks for your replies!
I did some more research and tests. It seems my sim card is faulty.
I'm gonna have it replaced asap. That should solve it.
Got my sim replaced. Issue wasn't solved.
It seems my dataplan is somehow causing this.
My provider is now looking into it.
Looking for some input...
Im on .8 and s-off. had no issues. A couple days ago I updated to the .11 radio from one of the zips in the dev section. No problems. Then yesterday, my wifi died. I get either an endless "turning on" or a "error' when trying to use it. Ive used the firmware packages in the dev section to rewrite firmware, reflashed the .11 radio, and also tried reflashing the stock kernel. Nothing... No Changes.
Anything I am missing here? Ive been an avid flashaholic since the original EVO days, so Im no novice.
HTC is really screwing us all over without a damn working RUU
Ok, I was stock rooted to allow for wifi hotspot. Once I started getting the latest OTA from VZW I decided to try to go back to stock to accept the OTA. I went through all the YouTube video's and loaded the LG software but my phone would never sync to the LG suite software. I ended up giving up and just kept pushing the OTA off. It got so bad that I decided last night to install a recovery and then flash an unofficial CWM rom. So this morning it was working fine and then all of the sudden, I lost VZW data. Couldn't get any signal. So I decided to try to flash the Official Cyanogenmod 11. That blew up during the setup and gave me an error that it could not find any cellular service. I wiped the phone and tried to restore the backup I made of my stock rom with the recovery on it. I made the backup the second the recovery was finished. It's giving me an MD5 error?? I've tried this multiple times with the same result. So, I then decide to flash one of the two roms (unofficial & official) back to see if I can get the phone working again. No such luck.... It keeps trying to set up my "cellular service" and just runs. Nothing ever finishes. I'm really worried at this point. I would be perfectly fine to flash a Verizon image and go back to stock. But I can't seem to find out how to do this or where to find the file. Please help me.. I'm getting desperate.
Edit: I tired to flash the Unofficial Rom again and this time it seems to be working. I would still rather just go back to stock though. If anyone can point me to the correct place I'd be very appreciative.
Thanks
Dave
dbow32 said:
Ok, I was stock rooted to allow for wifi hotspot. Once I started getting the latest OTA from VZW I decided to try to go back to stock to accept the OTA. I went through all the YouTube video's and loaded the LG software but my phone would never sync to the LG suite software. I ended up giving up and just kept pushing the OTA off. It got so bad that I decided last night to install a recovery and then flash an unofficial CWM rom. So this morning it was working fine and then all of the sudden, I lost VZW data. Couldn't get any signal. So I decided to try to flash the Official Cyanogenmod 11. That blew up during the setup and gave me an error that it could not find any cellular service. I wiped the phone and tried to restore the backup I made of my stock rom with the recovery on it. I made the backup the second the recovery was finished. It's giving me an MD5 error?? I've tried this multiple times with the same result. So, I then decide to flash one of the two roms (unofficial & official) back to see if I can get the phone working again. No such luck.... It keeps trying to set up my "cellular service" and just runs. Nothing ever finishes. I'm really worried at this point. I would be perfectly fine to flash a Verizon image and go back to stock. But I can't seem to find out how to do this or where to find the file. Please help me.. I'm getting desperate.
Edit: I tired to flash the Unofficial Rom again and this time it seems to be working. I would still rather just go back to stock though. If anyone can point me to the correct place I'd be very appreciative.
Thanks
Dave
Click to expand...
Click to collapse
Here is a link to flash back to stock: http://forum.xda-developers.com/verizon-lg-g3/general/guide-flash-to-stock-10b-kdz-method-t2928140
I know you wanted to take the OTA, but why not download one of the stock based 11c ROM's, like Jasmine 3.0? That way you'll still get the latest version(11c) but you won't lose root and recovery. The OTA patches root, so no recovery either. Here's a link for Jasmine 3.0 stock based 11c if you want to try it: http://forum.xda-developers.com/verizon-lg-g3/development/rom-jasminerom-v1-0-t2904641
Also, there has been issues with data on the CM builds. It seems pretty common right now. Check the CM threads for more info on that. I believe there is a command people have been entering(killall rild in terminal emulator) to get data back, but it seems 50/50 that it'll work.
startswithPendswithOOH said:
Here is a link to flash back to stock: http://forum.xda-developers.com/verizon-lg-g3/general/guide-flash-to-stock-10b-kdz-method-t2928140
I know you wanted to take the OTA, but why not download one of the stock based 11c ROM's, like Jasmine 3.0? That way you'll still get the latest version(11c) but you won't lose root and recovery. The OTA patches root, so no recovery either. Here's a link for Jasmine 3.0 stock based 11c if you want to try it: http://forum.xda-developers.com/verizon-lg-g3/development/rom-jasminerom-v1-0-t2904641
Also, there has been issues with data on the CM builds. It seems pretty common right now. Check the CM threads for more info on that. I believe there is a command people have been entering(killall rild in terminal emulator) to get data back, but it seems 50/50 that it'll work.
Click to expand...
Click to collapse
Hey thanks a lot for your reply. I understand what you're saying with going back to stock. My issues with flashing custom Roms is that I have to have my phone work 100%. I've been flashing since the original Droid Incredible. And I've NEVER found a Rom that didn't have minor glitches and issues. Usually those issues affect my daily routine. I'll give Jasmine3.0 a shot and if it works I might just keep it. If not i'll just suffer through VZW's BS! Anyway, really appreciate your input.
Dave
dbow32 said:
Hey thanks a lot for your reply. I understand what you're saying with going back to stock. My issues with flashing custom Roms is that I have to have my phone work 100%. I've been flashing since the original Droid Incredible. And I've NEVER found a Rom that didn't have minor glitches and issues. Usually those issues affect my daily routine. I'll give Jasmine3.0 a shot and if it works I might just keep it. If not i'll just suffer through VZW's BS! Anyway, really appreciate your input.
Dave
Click to expand...
Click to collapse
Glad to help. I'm with you on the 100% functionality too, so that is why I'm on Jasmine 3.0. Don't get me wrong, I love custom ROMs and all the work the devs do, but until all the kinks are worked out I'd rather be stock.
Also, I'm not trying to advertise anything, but flashing the skydragon kernel into Jasmine has helped the speed/lag and battery life as well. Its worth a try - but it only works on stock/non-AOSP based ROMs. If you try it though, also download the stock 11c kernel that the OP put in the thread just in case you have issues. I don't have the link handy, but the kernel is located in the "original android development" thread. Peace
dbow32 said:
Ok, I was stock rooted to allow for wifi hotspot. Once I started getting the latest OTA from VZW I decided to try to go back to stock to accept the OTA. I went through all the YouTube video's and loaded the LG software but my phone would never sync to the LG suite software.
Click to expand...
Click to collapse
Which drivers were you using? I had trouble with the Unified Drivers linked in some posts and had to use the Verizon specific drivers. I also had to usually reinstall the drivers each time I tried to use the flash tool to get it to recognize my phone.
BladeRunner said:
Which drivers were you using? I had trouble with the Unified Drivers linked in some posts and had to use the Verizon specific drivers. I also had to usually reinstall the drivers each time I tried to use the flash tool to get it to recognize my phone.
Click to expand...
Click to collapse
To be honest, I'm not sure what drivers I was using. I did a Google search for LG suite and found the closest version I could find. They didn't have the VS985, Only P985. So that might have had something to do with it.
startswithPendswithOOH said:
Glad to help. I'm with you on the 100% functionality too, so that is why I'm on Jasmine 3.0. Don't get me wrong, I love custom ROMs and all the work the devs do, but until all the kinks are worked out I'd rather be stock.
Also, I'm not trying to advertise anything, but flashing the skydragon kernel into Jasmine has helped the speed/lag and battery life as well. Its worth a try - but it only works on stock/non-AOSP based ROMs. If you try it though, also download the stock 11c kernel that the OP put in the thread just in case you have issues. I don't have the link handy, but the kernel is located in the "original android development" thread. Peace
Click to expand...
Click to collapse
I have a question, what is the "Modem" for? BTW, this Rom is VERY nice. Thanks
dbow32 said:
I have a question, what is the "Modem" for? BTW, this Rom is VERY nice. Thanks
Click to expand...
Click to collapse
Modem is the radio. Some people reported better signal strength on the 11c modem versus the 10b modem, but I didn't notice too much of a difference myself.
And glad you like the ROM, but all thanks go to hsbadr who came up with it
startswithPendswithOOH said:
Modem is the radio. Some people reported better signal strength on the 11c modem versus the 10b modem, but I didn't notice too much of a difference myself.
And glad you like the ROM, but all thanks go to hsbadr who came up with it
Click to expand...
Click to collapse
You know, it's really odd but the last few weeks my phone's signal has dropped. I listen to Sirius through my phone during the day at work. And I've always received 1 to 2 bars of 4g. But the last few weeks, It's dropped to about 2 to 3 bars of 3G. I thought maybe VZW was secretly throttling me. But maybe it's the updated Radio?
dbow32 said:
You know, it's really odd but the last few weeks my phone's signal has dropped. I listen to Sirius through my phone during the day at work. And I've always received 1 to 2 bars of 4g. But the last few weeks, It's dropped to about 2 to 3 bars of 3G. I thought maybe VZW was secretly throttling me. But maybe it's the updated Radio?
Click to expand...
Click to collapse
It's possible the modem could've been causing problems. Is 11c better or worse for you? And its also possible big red was throttling you too. That seems like something they'd do.
If you use/like xposed framework G3 tweaksbox is a good app to get for customizing your phone a little bit. And greenify and amplify are good xposed apps that help your battery life a whole lot. They are worth checking out in the play store.
Hello everyone,
I am a complete noob and hopefully you guys can help me out. I have tried to wrap my head around all the new android terms and my head is spinning. Anyways, I was given a HTC Sensation 4G Z710a on the Bell network. I registered on the htcdev to unlock the bootloader and following the steps, I fail to get the token. I have tried on two PC's and my friend tried on his MAC. My friend thinks the reason it fails is because the phones software is not up to date. Is it possible that it cannot get the token because the software is out of date? We tried to update the software and it fails. The problem looks like it is due to the installation of a clockworkmod. I have tried using the factory reset and the the cwm to do a factory reset and nothing has changed. Other than this, it looks like the phone has S-OFF and is not rooted.
Any help would be greatly appreciated.
Messed_sensation said:
Hello everyone,
I am a complete noob and hopefully you guys can help me out. I have tried to wrap my head around all the new android terms and my head is spinning. Anyways, I was given a HTC Sensation 4G Z710a on the Bell network. I registered on the htcdev to unlock the bootloader and following the steps, I fail to get the token. I have tried on two PC's and my friend tried on his MAC. My friend thinks the reason it fails is because the phones software is not up to date. Is it possible that it cannot get the token because the software is out of date? We tried to update the software and it fails. The problem looks like it is due to the installation of a clockworkmod. I have tried using the factory reset and the the cwm to do a factory reset and nothing has changed. Other than this, it looks like the phone has S-OFF and is not rooted.
Any help would be greatly appreciated.
Click to expand...
Click to collapse
Kind of hard for us to tell you if the issue is the software update, when you haven't told us which update it's on. However, since the phone has already been modded, and is S-Off, that means the bootloader is already unlocked so using the HTCdev website is not needed. You can just update via a custom rom since you already have CWM.
es0tericcha0s said:
Kind of hard for us to tell you if the issue is the software update, when you haven't told us which update it's on. However, since the phone has already been modded, and is S-Off, that means the bootloader is already unlocked so using the HTCdev website is not needed. You can just update via a custom rom since you already have CWM.
Click to expand...
Click to collapse
Thank you for your reply with the good news. This is probably irrelevant now that you said i can update via a custom rom. Under software information: Android Version; 2.3.3, HTC Sense Version; 3.0, Software Number 1.35.666.1.
It looks like now I need to research how to update via a custom rom and which rom to get. (Update. I looked into flashing a ruu and my cid is SuperCID 11111111. As long as I find a ruu that is Pyramid TMOUS, it should be good?) I am exited to be getting rid of my junky iphone. Do you have any suggestions as to what rom to get??
Messed_sensation said:
Thank you for your reply with the good news. This is probably irrelevant now that you said i can update via a custom rom. Under software information: Android Version; 2.3.3, HTC Sense Version; 3.0, Software Number 1.35.666.1.
It looks like now I need to research how to update via a custom rom and which rom to get. (Update. I looked into flashing a ruu and my cid is SuperCID 11111111. As long as I find a ruu that is Pyramid TMOUS, it should be good?) I am exited to be getting rid of my junky iphone. Do you have any suggestions as to what rom to get??
Click to expand...
Click to collapse
I would upgrade the phone to ICS via the RUU. I suggest this for 2 reasons - 1) so you can have the newest update and firmware as just flashing an ICS rom by itself will not be a good idea as you will have issues with the touch sensors and radios (touch screen won't respond and signal issues) and 2) so you can have experience on how to put the phone back to stock in case there's an issue during flashing a rom, or you need to resell it. Once you have the RUU and know it works, then flashing roms will be much less scary as there aren't many things you can do that would not be fixable by it. You can get away with just flashing the rom and the firmware as well, but I speak with many years of experience and 100s of phones under my belt, and I know that whenever I play with a new phone, I learn how to fix it first before I learn how to mod it.
As far as suggestions, I would start with something simple and solid like Android Revolution HD. See what you like and dislike and go from there.
es0tericcha0s said:
I would upgrade the phone to ICS via the RUU. I suggest this for 2 reasons - 1) so you can have the newest update and firmware as just flashing an ICS rom by itself will not be a good idea as you will have issues with the touch sensors and radios (touch screen won't respond and signal issues) and 2) so you can have experience on how to put the phone back to stock in case there's an issue during flashing a rom, or you need to resell it. Once you have the RUU and know it works, then flashing roms will be much less scary as there aren't many things you can do that would not be fixable by it. You can get away with just flashing the rom and the firmware as well, but I speak with many years of experience and 100s of phones under my belt, and I know that whenever I play with a new phone, I learn how to fix it first before I learn how to mod it.
As far as suggestions, I would start with something simple and solid like Android Revolution HD. See what you like and dislike and go from there.
Click to expand...
Click to collapse
Thank you for all your help and suggestion:good:. I am now running the Android Revolution HD.
This is a huge change from my iphone 4.
es0tericcha0s said:
I would upgrade the phone to ICS via the RUU. I suggest this for 2 reasons - 1) so you can have the newest update and firmware as just flashing an ICS rom by itself will not be a good idea as you will have issues with the touch sensors and radios (touch screen won't respond and signal issues) and 2) so you can have experience on how to put the phone back to stock in case there's an issue during flashing a rom, or you need to resell it. Once you have the RUU and know it works, then flashing roms will be much less scary as there aren't many things you can do that would not be fixable by it. You can get away with just flashing the rom and the firmware as well, but I speak with many years of experience and 100s of phones under my belt, and I know that whenever I play with a new phone, I learn how to fix it first before I learn how to mod it.
As far as suggestions, I would start with something simple and solid like Android Revolution HD. See what you like and dislike and go from there.
Click to expand...
Click to collapse
Here is another update, and I am not sure if you can help. I thought everything was fine with the install, but it seems like my mobile network is not working. I followed all the steps from http://forum.xda-developers.com/showthread.php?t=1098849 except I used Clockwork Mod instead of 4EXT Touch Recovery. I looked through all the related settings and even tried changing them, rebooting and seeing if it made any changes. I also even followed the steps a second time and got the same result.
Messed_sensation said:
Here is another update, and I am not sure if you can help. I thought everything was fine with the install, but it seems like my mobile network is not working. I followed all the steps from http://forum.xda-developers.com/showthread.php?t=1098849 except I used Clockwork Mod instead of 4EXT Touch Recovery. I looked through all the related settings and even tried changing them, rebooting and seeing if it made any changes. I also even followed the steps a second time and got the same result.
Click to expand...
Click to collapse
Is it just data or are you unable to make calls and texts as well? If it's just data, then most likely it is an issue with the Bell APN needing set correctly. If you don't get a signal or any connection to the cell towers, then you might not have the right firmware or radio. Did you update to the last update HTC put out for it?
es0tericcha0s said:
Is it just data or are you unable to make calls and texts as well? If it's just data, then most likely it is an issue with the Bell APN needing set correctly. If you don't get a signal or any connection to the cell towers, then you might not have the right firmware or radio. Did you update to the last update HTC put out for it?
Click to expand...
Click to collapse
:good:You are good! It was just my data that was not working, and you were right on the money. After reading your reply, I checked my APN settings and adjusted them accordingly to what my carrier states. It is working perfectly now. Thank you so very much for your help. Take care.
Messed_sensation said:
:good:You are good! It was just my data that was not working, and you were right on the money. After reading your reply, I checked my APN settings and adjusted them accordingly to what my carrier states. It is working perfectly now. Thank you so very much for your help. Take care.
Click to expand...
Click to collapse
I do this kinda stuff for a living. Glad all is well. Enjoy your "new" phone. :victory:
es0tericcha0s said:
I do this kinda stuff for a living. Glad all is well. Enjoy your "new" phone. :victory:
Click to expand...
Click to collapse
I have been getting around 12 hours out of my battery with not too much use on the phone. I am running the SebastionFM Kernel. I read that I will get better battery life on the Bricked Kernel. Can you tell me if that is the way to go? I am trying to dl the kernel to flash it, but I am not sure which file to download. http://forum.xda-developers.com/showthread.php?t=1256668. Also, when I flash the Kernel, Is it pretty straight forward or are there settings that I would need to choose.
Thanks again.
Messed_sensation said:
I have been getting around 12 hours out of my battery with not too much use on the phone. I am running the SebastionFM Kernel. I read that I will get better battery life on the Bricked Kernel. Can you tell me if that is the way to go? I am trying to dl the kernel to flash it, but I am not sure which file to download. http://forum.xda-developers.com/showthread.php?t=1256668. Also, when I flash the Kernel, Is it pretty straight forward or are there settings that I would need to choose.
Thanks again.
Click to expand...
Click to collapse
Depends on which rom you are using... The developer of the kernel mentioned near the end of the thread that his kernels are a little outdated for the newer Sense roms that are out there, so you might need to proceed with caution. Whenever you are flashing kernels, you should both make sure you have things backed up somewhere safe (Google, your PC, etc) as well as make a nandroid backup in recovery before flashing. It's typically recommended to wipe the cache and dalvik cache before installing new kernels (since you are S-Off, S-On users need a slightly different path to upgrade...). You might look into why your battery life is not as good as it could be in it's current configuration first before changing major components such as the kernel. Look into Greenify to hibernate apps while the screen is off and something like GSam Battery Monitor or Better Battery Stats or Wakelock Detector to break down the battery stats and wakelocks as those typically cause the biggest loss of battery life.
es0tericcha0s said:
Depends on which rom you are using... The developer of the kernel mentioned near the end of the thread that his kernels are a little outdated for the newer Sense roms that are out there, so you might need to proceed with caution. Whenever you are flashing kernels, you should both make sure you have things backed up somewhere safe (Google, your PC, etc) as well as make a nandroid backup in recovery before flashing. It's typically recommended to wipe the cache and dalvik cache before installing new kernels (since you are S-Off, S-On users need a slightly different path to upgrade...). You might look into why your battery life is not as good as it could be in it's current configuration first before changing major components such as the kernel. Look into Greenify to hibernate apps while the screen is off and something like GSam Battery Monitor or Better Battery Stats or Wakelock Detector to break down the battery stats and wakelocks as those typically cause the biggest loss of battery life.
Click to expand...
Click to collapse
I think it is my battery. I picked up an Anker and the phone is now at 20% after 21hrs. Is there a way to get Emoji to work on my phone? When people SMS me, on the lock screen they show up as a question mark in a box but when i go to read the text message there is nothing there.
Using a different keyboard will let you send Emojis, but not really sure about enabling the view from other people's messages off the top of my head, sorry. I recommend SwiftKey for a great keyboard replacement with lots of built in Emojis.