speck - AT&T Samsung Galaxy Note I717

since there doesn't seem to be a post about it yet...
the speck case that retail is carrying is wonderful. just like the atrix case, smooth on the back, raised rubber around the screen so it wont slide if you turn it over and doesn't add too much heft.
only downside is the ridiculous $40 they are charging for it. get it somewhere else unless you have a 50% premier discount.
on a side note, the screen protector they sell is actually pretty good too, i'm not noticing any difference in screen sensitivity.

I just the black and grey speck case today, will hold me off until a Ballistic or otterbox comes around.
I thought AT&T had a promotion where you get free accessories for the cost of the device?

Keep in mind you have 30 days to return it if you don't want it. No restock fee.
I think You can get a better case from SGP for much less. Just saying.
But yeah, I sell the crap out of the Speck ones

Maroon Mushroom said:
Keep in mind you have 30 days to return it if you don't want it. No restock fee.
I think You can get a better case from SGP for much less. Just saying.
But yeah, I sell the crap out of the Speck ones
Click to expand...
Click to collapse
Does it matter if I return just the case and box? or does every single piece have to go in it? Because I might just do the SGP one. I just needed a case to protect this beauty

Maroon Mushroom said:
Keep in mind you have 30 days to return it if you don't want it. No restock fee.
I think You can get a better case from SGP for much less. Just saying.
But yeah, I sell the crap out of the Speck ones
Click to expand...
Click to collapse
I love the sgp screen protectors but think the speck cases are better than sgp. I bought a sgp hybrid case for my skyrocket and it was so bad I think I tried to give it away and nobody wanted it. I think I tossed it. I saw a girl drop her iPhone yesterday with a speck candy shell case and it bounced around and was fine. I think they are a bit bulky for the pocket but they are superb at protection.
But 40 bucks is a bit steep!
Sent from my SAMSUNG-SGH-I717 using XDA App

well it would be cool if they made an att version of this
http://www.spigen.com/cell-phone/sa...tor-glas-t-premium-tempered-glass-series.html
don't think it would work due to the lack of button cutouts

ndn715 said:
well it would be cool if they made an att version of this
http://www.spigen.com/cell-phone/sa...tor-glas-t-premium-tempered-glass-series.html
don't think it would work due to the lack of button cutouts
Click to expand...
Click to collapse
that would be nice and I'm sure it won't be long,

ndn715 said:
well it would be cool if they made an att version of this
http://www.spigen.com/cell-phone/sa...tor-glas-t-premium-tempered-glass-series.html
don't think it would work due to the lack of button cutouts
Click to expand...
Click to collapse
It's available for pre-order - http://www.spigen.com/cell-phone/sa...tor-glas-t-premium-tempered-glass-series.html

I bought the Speck today at AT&T. It's really nice. Fits perfect, and I like how it makes it really easy to push the volume/power buttons. I'm going to be registering my AT&T account under a corporate account since I can get 24% off my monthly bill. Sure I'll qualify discounts on accessories after that. So I may end up returning this and re-buying it for the discount LoL

Is the Speck comparable to the Otterbox Commuter cases?

roperband said:
Is the Speck comparable to the Otterbox Commuter cases?
Click to expand...
Click to collapse
This Speck is just a thin hard plastic case. Not thick at all.

I purchased the Speck on impulse . It provides great coverage and I like it...except for the super easy scuffing on the backside of
the case. I just think the case should retain it's good looks....especially for $40.
...from my Samsung Note via Tapatalk.

bought this
this is an amazing case
http://www.ebay.ca/itm/300646266661?ssPageName=STRK:MEWNX:IT&_trksid=p3984.m1497.l2649

wirelezzz said:
this is an amazing case
http://www.ebay.ca/itm/300646266661?ssPageName=STRK:MEWNX:IT&_trksid=p3984.m1497.l2649
Click to expand...
Click to collapse
That's the same exact case I have and I love it as well. Feels good to the grip doesn't add bulk and looks clean as well.
Sent from my SAMSUNG-SGH-I717 using xda premium

When I picked up my preordered Note at the store they hadn't had any of the accessories on display. I was disappointed that the Speck case didn't come in a neutral white (I don't mind pink in general but I wanted white with grey interior not pink). Anyone know if the Speck case will come in more colorways?

I've quickly decided I don't like this case at all. Doesn't fit into any dock, and is a pain in the butt to remove and put on. One can argue that it shouldn't be easy to get a case off, but they make it extremely difficult to remove. Looking into that TPU case.

pics of speck case?

It is a nice case but $40 for a thin silicone liner covered by a shiny black shell? That complaint aside, it is a decent case that slips in and out of the pocket easily and does a nice job of protecting the mighty Note.
However, I do wish they would go with a less shiny, less scratch prone back.

http://www.ebay.com/itm/Premium-Hyb...ccessories&hash=item2c62bc725a#ht_4614wt_1163 I like this one.... I love the double layers of the otterbox, but dont like the price. I usually buy a case at the att store, order a case from ebay, return the att case.

I bought this case while I was waiting for my sline case I ordered fro eBay to come in. The power button kept waking up my phone because the case made the button very sensitive. I took it off after 3 days because I decided I was going to return it. It also had gaps between the screen and the case that dirt and dust kept getting in. It was very hard to get on and off. Never been afraid of breaking my phone to take off a case before. I was also unhappy that it showed oil and fingerprints very easily. And apparently scratches very easy. I went to take it back to the ATT store and the greeter immediatley said let me see it because these cases scratch really easy and we can't take them back if they are scratched. He said yep see that there a couple scratches and we wont be able to return it.
Long story short I complained and got a discount but beware of this case. Be sure you like it for $40 and are willing to keep it before you buy it.
Sent from my SAMSUNG-SGH-I717 using xda premium

Related

Case Mate For Evo 3d?

Just wanted to see if anyone has any of the Case Mate series cases for the Evo 3d? I was thinking about getting the Tough case, but from a video review on youtube, the case apparently has a random port on the bottom...
http://www.youtube.com/watch?v=mskLfmXEh0Y
Where I have found them online:
http://www.mobilecityonline.com/wireless/store/productdetail.asp?productid=28094#section10
http://www.wirelessground.com/htc-e...3d-case-mate-tough-case-black&channelid=FROOG
Currently have the Defender, but DAMN its bulky
I will never buy another case mate again
Sent from my Nexus S 4G using XDA App
mattfmartin said:
I will never buy another case mate again
Sent from my Nexus S 4G using XDA App
Click to expand...
Click to collapse
Please fill me in lol
i have a casemate and i have been using this badboy since sept! i use this on my evo 4g over my seidio rugged! and i am rough on my ph and dropping it and this casemate is tough! also slides in and out of a pant pocket real good!
Sent from my PC36100 using XDA Premium App
HTCRALEIGHFAN said:
i have a casemate and i have been using this badboy since sept! i use this on my evo 4g over my seidio rugged! and i am rough on my ph and dropping it and this casemate is tough! also slides in and out of a pant pocket real good!
Sent from my PC36100 using XDA Premium App
Click to expand...
Click to collapse
Maybe I will have to reconsider, I would still like to see some more people weigh in. I have the OB Defender right now, and its excellent protection wise just a bit bulky...
The convert from seidio/BB is pretty awesome two good cases plus a nice clip. This is until I can get the ballistic case
Sent from my PG86100 using Tapatalk
I have the Tough Case, just delivered today. It's similar in design to the Otterbox Commuter -- a thin silicone base layer covers the entire phone, while a hard plastic shell snaps around the back, sides and corners.
Pros: The fit is absolutely perfect. The silicone layer over the buttons is just the right thickness -- the power, volume and camera buttons are all covered, but their function is not impeded in the slightest. I was particularly delighted by how well the camera button works, no interference with function or sensitivity at all.
Around the front edge, the silicone layer rises a few millimeters above the screen, so you can comfortably place the phone face down without worrying about scratching the glass. Similarly, the camera lenses and flash are deeply recessed on the back, with perfectly sized openings around each (which, IMO, is how the lenses should've been on the phone itself). You can drag your phone across concrete with no worries, if that's the kind of thing you're into.
The hard plastic outer layer has a smooth matte coating that makes it feel more like silicone than hard plastic, giving it a very nice feel in the hand. It's also covered with a raised, textured pattern, making the phone very unlikely to slip out of your hand. By contrast, the Otterbox Commuter I briefly had on my Hero had a plastic outer shell that was slick and shiny, and the phone slipped out of my hand twice within the two days I left it on (which is why I used it only briefly).
Cons: My only real complaints are aesthetic. I really like the slim, refined look of this phone, and the grippy, textured, matte black surface of this case, while very protective and easy to hang on to, is a tad inelegant, giving the phone more of an industrial feel. It also adds a bit of bulk, which was immediately noticeable when I pocketed the phone with it on (although I will say it's positively svelte compared to some of the other cases I've seen pictured on this forum). The phone does also feel noticeably heavier with this case on.
In response to the OP, the case does have a couple of mysterious ports at the bottom. One lines up with the slot you use to pry the battery cover off, while a smaller one lines up with a tiny hole just to the left of the other (edit: duh! that's the mike, thanks minieod). I don't know why those are there, but they don't do any harm.
Overall, I'd say thumbs up. If you like the basic design of Otterbox cases but want something slimmer than the Defender and easier to hold than the Commuter, this is probably your best choice.
I have the casemate "barely there" case on my OG Evo. I have been using it since shortly after launch and it has been just the right amount of protection without adding a lot of bulk. I keep my phone in a pocket with nothing else so that case helps with day to day wear and more importantly it makes it so the camera glass doesn't touch the table when the phone is laying on its back.
I am thinking of picking up an Evo 3d for my girlfriend in order to replace her dying palm Pre but she is pretty rough on phones. She drops hers a lot and throws it in her purse with keys and change and stuff. The thought of getting her a "glass slab" style phone frightens me. I will probably pick up a barely-there case for the Evo 3d if I get it for her. It's weird that they don't list them on their site but that mobilecity site seems to have them in a few colors for $15. That's a good price IMO and my last one came with a free screen protector. Hopefully that will be enough to protect her phone.
I guess I can also cancel the insurance on my Evo and move it to her 3d if I get it since my account is due for upgrade and hers won't be for two years if i get her the 3d.
po96od said:
The case does have a couple of mysterious ports at the bottom. One lines up with the slot you use to pry the battery cover off, while a smaller one lines up with a tiny hole just to the left of the other. I don't know why those are there, but they don't do any harm.
Click to expand...
Click to collapse
that "mysterious hole" on the left of the phone you'll want to remain uncovered --- unless you'd rather not talk to anyone ---- thats the microphone
other than that i totally agree with you on the case - i got it at the sprint store and i LOVE it
i had the TPU case from the user who posted on here earlier in june (forgot your username sorry!) and sold them on tpu-cases.com or something like that... it was 8 bucks shipped, and great quality for tpu
but i tried this on when i was waiting at the store picking up my moms evo3d for her bday gift.... and decided to get the case-mate tough, and give her my tpu one
the casemate tough is sleek....i dont agree with po96 on the "inelegant" , because its pretty similar to the style of the battery cover on the 3d....
i like it a lot, and it feels very solid and protected....
i used to use the otterbox commuter on my evo4g and loved it, but i really hated the new design for the 3d....
minieod said:
that "mysterious hole" on the left of the phone you'll want to remain uncovered --- unless you'd rather not talk to anyone ---- thats the microphone
other than that i totally agree with you on the case - i got it at the sprint store and i LOVE it
i had the TPU case from the user who posted on here earlier in june (forgot your username sorry!) and sold them on tpu-cases.com or something like that... it was 8 bucks shipped, and great quality for tpu
but i tried this on when i was waiting at the store picking up my moms evo3d for her bday gift.... and decided to get the case-mate tough, and give her my tpu one
the casemate tough is sleek....i dont agree with po96 on the "inelegant" , because its pretty similar to the style of the battery cover on the 3d....
i like it a lot, and it feels very solid and protected....
i used to use the otterbox commuter on my evo4g and loved it, but i really hated the new design for the 3d....
Click to expand...
Click to collapse
PMed you, guess you might not have noticed. Anyways has anyone else seen these in a Sprint Store? I didn't see one at mine but maybe he was at a non-corporate store?
#Winning# said:
PMed you, guess you might not have noticed. Anyways has anyone else seen these in a Sprint Store? I didn't see one at mine but maybe he was at a non-corporate store?
Click to expand...
Click to collapse
hey sorry, my PM notifications are not working i guess
i am going to take some pics of mine now and post here
(note: these pics were taken on an Evo3D)
http://imgur.com/a/cCdel
neodorian said:
I guess I can also cancel the insurance on my Evo and move it to her 3d if I get it since my account is due for upgrade and hers won't be for two years if i get her the 3d.
Click to expand...
Click to collapse
get the 3d on her plan...swap the 3d to your number, and your evo to hers....at that time you both have two new activated phones...both are now eligible for the TEP
also, now you will have a 3d
minieod, nice pics. I was meaning to post some, but you were way more completist about it than I would've been.
The mystery hole at the bottom is for a lanyard.
i wish it would come with a holster
Phreddo said:
The mystery hole at the bottom is for a lanyard.
Click to expand...
Click to collapse
lol
no...its the microphone...when your mouth makes noise, that noise goes into that hole
po96od said:
I have the Tough Case, just delivered today. It's similar in design to the Otterbox Commuter -- a thin silicone base layer covers the entire phone, while a hard plastic shell snaps around the back, sides and corners.
Pros: The fit is absolutely perfect. The silicone layer over the buttons is just the right thickness -- the power, volume and camera buttons are all covered, but their function is not impeded in the slightest. I was particularly delighted by how well the camera button works, since the TPU case I was initially using basically disabled it.
Around the front edge, the silicone layer rises a few millimeters above the screen, so you can comfortably place the phone face down without worrying about scratching the glass. Similarly, the camera lenses and flash are deeply recessed on the back, with perfectly sized openings around each (which, IMO, is how the lenses should've been on the phone itself). You can drag your phone across concrete with no worries, if that's the kind of thing you're into.
The hard plastic outer layer has a smooth matte coating that makes it feel more like silicone than hard plastic, giving it a very nice feel in the hand. It's also covered with a raised, textured pattern, making the phone very unlikely to slip out of your hand. By contrast, the Otterbox Commuter I briefly had on my Hero had a plastic outer shell that was slick and shiny, and the phone slipped out of my hand twice within the two days I left it on (which is why I used it only briefly).
Cons: My only real complaints are aesthetic. I really like the slim, refined look of this phone, and the grippy, textured, matte black surface of this case, while very protective and easy to hang on to, is a tad inelegant, giving the phone more of an industrial feel. It also adds a bit of bulk, which was immediately noticeable when I pocketed the phone with it on (although I will say it's positively svelte compared to some of the other cases I've seen pictured on this forum). The phone does also feel noticeably heavier with this case on.
In response to the OP, the case does have a couple of mysterious ports at the bottom. One lines up with the slot you use to pry the battery cover off, while a smaller one lines up with a tiny hole just to the left of the other (edit: duh! that's the mike, thanks minieod). I don't know why those are there, but they don't do any harm.
Overall, I'd say thumbs up. If you like the basic design of Otterbox cases but want something slimmer than the Defender and easier to hold than the Commuter, this is probably your best choice.
Click to expand...
Click to collapse
So sounds like you like it better than the Otterbox. I am currently using the Commuter and love the feel of it (didn't feel slippery to me, has a nice texture) but hate the gap at the top. I am getting a new silicone layer from Otterbox to see if that one fits better. I think I might order the Tough Case as well and compare the two. Overall would you say its thinner than the Commuter?
I wish I could find the Tough Case in stores to give it a test before purchasing. I hate having to buy online and pay return costs for shipping if I don't like it but I guess that's what I'll have to do.
*update* Just ordered a Tough Case. There is a 20% off code for their online store: CM06-SP20. The online store has free shipping to US addresses and didn't charge me tax, so $28 total for the tough case (originally $35). Not bad! If I don't like it I can just pay return shipping. I might just keep it for a backup.
mrazzino said:
So sounds like you like it better than the Otterbox. I am currently using the Commuter and love the feel of it (didn't feel slippery to me, has a nice texture) but hate the gap at the top. I am getting a new silicone layer from Otterbox to see if that one fits better. I think I might order the Tough Case as well and compare the two. Overall would you say its thinner than the Commuter?
I wish I could find the Tough Case in stores to give it a test before purchasing. I hate having to buy online and pay return costs for shipping if I don't like it but I guess that's what I'll have to do.
*update* Just ordered a Tough Case. There is a 20% off code for their online store: CM06-SP20. The online store has free shipping to US addresses and didn't charge me tax, so $28 total for the tough case (originally $35). Not bad! If I don't like it I can just pay return shipping. I might just keep it for a backup.
Click to expand...
Click to collapse
eep - its on amazon for $30 + free shipping (which is free returns)
Anyone know if either the tough case or the barely there case will fit into the belt holster for the Seido Surface case(aka the plaitunum case at Best Buy)?
I'm currently using a TPU case in the Platinum holster because I like the added camera area coverage of the TPU case. I just hate the camera button covering of the TPU case.
The Case Mate cases look great but I really need a belt clip with them.
the wifes casemate shipped yesterday and will be here this weekend ill toss up pics
Sent from my PC36100 using XDA Premium App

Which Case Do You Reccomend for Atrix?

I wanna buy a case for my Atrix. My budget is small (around $5-$10).
So which one would you reccomend me?
Thanks!
I like the basic TPU cases. They don't add too much bulk and don't collect dust, but protect the phone from dings and scratches. They also have a lip around the front, so if the phone is set on a flat surface the screen won't actually touch the surface. It will make your phone somewhat warmer though, but pretty much all cases will probably do this, and it probably won't protect your phone as well as some of the larger cases. The case I use is $2.86 shipped from amazon and fits perfectly. I also have an otterbox but use the TPU case since its smaller, and doesn't collect dust like the otterbox. I know a lot of people like the otterboxes though. The jelly silicone cases are also dust collectors and tend to stretch after a while so I would advise avoiding any of those. If you look through this accessories forum you will see a lot of threads about cases that usually have reviews and pictures, so I suggest you read through some of those threads and find a case that looks good to you and sounds like what you are looking for from the reviews.
I would also suggest getting a screen protector. While the atrix does have gorilla glass, it is not truly unbreakable or unscratchable. While some may argue that its not really necessary, it costs a few dollars and has the potential to protect your phone's screen from scratches.
Great! Btw can you give me the product link you bought from Amazon?
I found this one: http://www.amazon.com/MOTOROLA-ATRI..._1_3?s=wireless&ie=UTF8&qid=1321000892&sr=1-3
But it says its a Gel Case (I don't TPU & Gel Cases are the same or not! )
If you need a strong case for a low price (there's better out there but well outside your price range) you can get a refurbished Otterbox Defender for $12 shipped:
http://www.all4cellular.com/otterbox-atrix-4g-defender-series-case-holster-black-refurbished.html
Edit: Yes, I bought one from these guys. It's legit.
treehumper said:
If you need a strong case for a low price (there's better out there but well outside your price range) you can get a refurbished Otterbox Defender for $12 shipped:
http://www.all4cellular.com/otterbox-atrix-4g-defender-series-case-holster-black-refurbished.html
Edit: Yes, I bought one from these guys. It's legit.
Click to expand...
Click to collapse
I don't wanna buy a refurbished one. I want a cheap but new one which will give my phone minimal (better) protection
saiftheboss7 said:
I don't wanna buy a refurbished one.
Click to expand...
Click to collapse
Why not?
k4zyn said:
Why not?
Click to expand...
Click to collapse
I just don't feel comfortable buying a refurbished one
Mine's fine. I even broke the holster clip and Otterbox is sending me a new one. My point is that if there's something wrong with it their warranty will cover it. It's a good way to save money and maximize your phone's protection.
Besides otterbox isn't minimal in size! It needs some extra space around the phone which makes it bigger! I don't like it. I like a minimal one yet that would protect my phone. Just like roswellkidd says. TPU cases are good
Bestbuy.com is selling the Otterbox Impact case for $3.75 with free shipping.
I'm not trying to be an Otterbox spokesman, I'm just fishing you some good deals.
http://www.bestbuy.com/site/OtterBo...ategoryId=pcmcat171900050029&id=1218312986856
treehumper said:
Bestbuy.com is selling the Otterbox Impact case for $3.75 with free shipping.
I'm not trying to be an Otterbox spokesman, I'm just fishing you some good deals.
http://www.bestbuy.com/site/OtterBo...ategoryId=pcmcat171900050029&id=1218312986856
Click to expand...
Click to collapse
Thanks! Maybe I'd buy it now!
The Impact case isn't as strong as the Defender refurb I listed earlier, but this is a lot cheaper and will most definitely save your phone from drops.
Should I go with a TPU case or this case? This still looks bulky! Besides, I think this won't perfectly fit into my pocket!
It depends on what your real need is. The Otterbox cases are for people who expect to drop their phone more often than others. I drop my phone at least once a day on hard surfaces and/or from insane heights (I'm a CATV installer that's clumsy with his phone). For a general user, the TPU case would be fine if you're not expecting to drop it a whole lot. It's also more fashionable, it won't make your phone look like it just Hulked out.
Personally, I'd keep a cheap Otterbox around in any case, you might need it if you're going to do anything daring. At least it wouldn't be a bad idea to have an Otterbox on a phone that may fall out of your pocket on a rollercoaster at Six Flags (happened to me without an Otterbox... I had to bury the phone).
treehumper said:
For a general user, the TPU case would be fine if you're not expecting to drop it a whole lot. It's also more fashionable, it won't make your phone look like it just Hulked out.
Click to expand...
Click to collapse
I'm on this group. I take good care of my phone. Besides, I can live without case. Just need it to make it more durable. So I'd go with a TPU case. Thanks for helping me to take my decision. As I'm a teenager style does matter for me
saiftheboss7 said:
I'm on this group. I take good care of my phone. Besides, I can live without case. Just need it to make it more durable. So I'd go with a TPU case. Thanks for helping me to take my decision. As I'm a teenager style does matter for me
Click to expand...
Click to collapse
My wife's probably at least twice your age and we still have to stylize her phone so I have to look at aesthetics every time I order a case as well
for your price range, you should just grab the refurbished deals posted.
or save up money and get a real case.
wow sorry I didn't get back earlier, I am actually too new to post links, but if you type in "atrix TPU case" into amazon you will see the TPU cases, that gel case you posted looked like a silicone case not a TPU case. Mine was the "smoke grey cruzer argyle" TPU case that is currently $2.86 with free shipping, although all five or so of the top results look like they are essentially the same, just different colors.
I hope I didn't talk you out of an otterbox in my first post, I personally was not satisfied with mine, but as you can see here most people love them. I also have never dropped my phone, so my case is basically just to protect it from dings and scratches if I ever do drop it. I don't expect it to protect my phone in a ten foot drop, but considering the highest I would ever have the chance of dropping it from in my daily routine is just a few feet, Ill take the slimmer case even if it does have less protection.
I, like many others, put in a vote for a TPU case... I have used the Otterbox Impact case, the rugged battery cover, and the TPU case...and the TPU case is by far may favorite. It offers ok drop protection, but mainly I love it becuase it's easy to get out of my pockets while the Impact or any rubberized case sticks to pockets making it really hard to get out in the car or while sitting in general. I think the atrix is a little too small without a case and the TPU case makes it slightly larger but not too large...it's the way to go.

Otterbox Defender knockoff.

Found what looks to be a knockoff of an Otterbox Defender that (according to the seller) fits our AT&T variant of the Galaxy S2. I've got one ordered and will report back when it shows up to let everyone know how well it fits. He has quite a few colors listed on his Ebay store, though I was boring and just went with black.
http://stores.ebay.com/Monster-Acce...799423011&_sid=62112801&_trksid=p4634.c0.m322
Yes please let us know how it works out for you. The one thing ive noticed with the knock-off otterboxs is the silicon skin is a little more plyable.
I've torn the silicon skin on so many "real" otterbox cases that might be a good thing. Especially since you can't buy just the silicon bits.
I contacted one of the ebay sellers that's listing a "not"erbox, about the fit and whether or not it has a built-in screen protector.
His reply: Thank you for your interest. Yes it does have a built-in screen protector but the quality isn't that great. Many of our customers ened up removing it. There is a very slight size difference between i777 and i9100 but this case will fit both.
I ended up buying the Seidio combo from Bestbuy for $34.
I take the screen protector off, too much dust and other stuff can get in-between the plastic protector and glass.
So I got the knockoff in...the case itself fits pretty well though it's obviously made for the international version. The biggest issue is how badly the belt clip attaches to the holster...if I dare try and rotate the thing it falls right off the clip. The built-in plastic screen protector on even the brand name ones annoy me, but this one annoys me more. I think I'm going to have to try out this particular seller's return policy unfortunately. I think for the price & low-quality build of this thing people should steer clear, especially now that better options are showing up for less than 2x the cost at major retailers.
Check out this case just like the commuter
http://www.amazon.com/Acase-SGH-I77...U37S/ref=sr_1_1?ie=UTF8&qid=1322441814&sr=8-1
I have it and love it
It looks like the skyrocket got the defender case
JBYoung said:
Check out this case just like the commuter
http://www.amazon.com/Acase-SGH-I77...U37S/ref=sr_1_1?ie=UTF8&qid=1322441814&sr=8-1
I have it and love it
Click to expand...
Click to collapse
I second this! Love the case.
gadget069 said:
It looks like the skyrocket got the defender case
Click to expand...
Click to collapse
That's the one I want
I messed around with one at a local mall store. The guy wanted $20 for it without the holster, but that's not why I passed on it. I thought it fit well enough, but the built-in screen protector was a waste of effort on the manufacturer's part. It was brownish, foggy and scratched (and that's after I removed the plastic protection). Seems like they could have done better with that, or just left it off.
The other problem was that there were no holes for the mic (near the headphone jack). So, I'll continue to wait... The Trident site states that there Kraken AMS for Galaxy S2 is "coming soon". Hope it's for the i777. I'd be on that quick.
I just talked to Trident on the phone, and they said that it's the Kraken AMS (the one with the solid exoskeleton) coming for the I777 next month (Jan). She said it was coming in all of their colors, too.
I have 1 of these it's called a ballistic case I paid 35 dollars at an at&t store and I absolutely love it. its it's very very snug anime iphone pills extra protective since I work in a warehouse and I've had a lot of cracked screens on my other phones because dropping them on the hard concrete. it does add some way to the phone as well as a definite notice and thickness. I would recommend this for anyone who wants to protect their phone. I'm positive this will last most users until the next upgrade.
In reference to this case
http://www.ebay.com/itm/Red-X-Shield-Hard-Case-Gel-Cover-Samsung-Galaxy-S2-AT-T-Attain-i777-/180766307645?pt=PDA_Accessories&hash=item2a1682f53d
Sent from my AT&T Galaxy S II using Tapatalk

Best case?

I just got a GS2 and trying to decide whether or not to get a case. Do you guys suggest getting one for added protection from drops?
EDIT: Ok, clearly a case is necessary, but which one? I have an Otterbox Commuter on my iPhone and dig the feel and durability. I see many complaints about SG2 cases not fitting or not having the right holes. Which is the best case in terms of fit, durability, and feel?
I definitely would. Protects from scratches, marks, and dust. I wouldnt count on it to protect from a normal drop though. I would suggest the Otterbox Commuter (make sure its the ATT i-777 version)
It's a $500+ phone you have. If you're ok with it breaking, then go without a case.
That's not saying it will break. There are plenty of stories about how well this phone does when dropped.
But it's the same reason people wear seat belts. 99% of the time they don't do much. But that 1% when you're in an accident, you're really happy you had it on.
It only takes one bad drop to ruin your phone. And screens for samsung devices are super expensive.
Sent from my SAMSUNG-SGH-I777 using XDA App
SupremeOverlord777 said:
I definitely would. Protects from scratches, marks, and dust. I wouldnt count on it to protect from a normal drop though. I would suggest the Otterbox Commuter (make sure its the ATT i-777 version)
Click to expand...
Click to collapse
Are you sure that Otterbox makes a case for the AT&T version? I checked around and only found a Commuter for International version.
I have an Otterbox Commuter now for my iPhone and love it.
They just released an att version for the otterbox commuter. I have the international and its fits flawlessly. The top Mic cut out is off but the call quality is still the same. Paid 20 bucks on Amazon for it
Sent from my SAMSUNG-SGH-I777 using xda premium
I just received this one and it fits flawlessly. They have 2 or 3 different colors. This one is a matte finish on the back and does not show any fingerprints and the TPU material feels great in the hand.
http://www.ebay.com/itm/260867073633?ssPageName=STRK:MEWNX:IT&_trksid=p3984.m1497.l2649
cheetablaze said:
They just released an att version for the otterbox commuter.
Click to expand...
Click to collapse
You sure? I checked Otterbox's site and Amazon. Can't find it.
iFalcon said:
I just received this one and it fits flawlessly. They have 2 or 3 different colors. This one is a matte finish on the back and does not show any fingerprints and the TPU material feels great in the hand.
http://www.ebay.com/itm/260867073633?ssPageName=STRK:MEWNX:IT&_trksid=p3984.m1497.l2649
Click to expand...
Click to collapse
Thanks! I'm looking at some TPU cases. Are they durable?
Just found a really cool one http://www.amazon.com/gp/product/B005OT75K0/ref=cm_ciu_pl_B005OT75K0_mo39VUI8EBFWYGJ
mzaur said:
You sure? I checked Otterbox's site and Amazon. Can't find it.
Click to expand...
Click to collapse
http://www.otterbox.com/Samsung-Gal...r=20&start=1&cgid=samsung-galaxy-s-2-cases-us
mzaur said:
I just got a GS2 and trying to decide whether or not to get a case. Do you guys suggest getting one for added protection from drops?
EDIT: Ok, clearly a case is necessary, but which one? I have an Otterbox Commuter on my iPhone and dig the feel and durability. I see many complaints about SG2 cases not fitting or not having the right holes. Which is the best case in terms of fit, durability, and feel?
Click to expand...
Click to collapse
This is going to depend a lot on how you use your phone. I am using the casemate barely there which provides a moderate level of drop protection while maintaining the slim profile and light feel that I really love about the Galaxy phones. But when I need to travel for work I put on the Ballistic case which has huge rubber corners and feels indestructible which is nice when you are moving around a lot and adding a much greater risk of dropping your phone. The otterbox commuter is a decent case, my wife has one on her iPhone 4. It seems to be a nice middle road between something like the "barely there" and the Ballistic.
Did you drop your old phone a lot?
mzaur said:
You sure? I checked Otterbox's site and Amazon. Can't find it.
Click to expand...
Click to collapse
Here you go
http://www.otterbox.com/Samsung-Gal...r=20&start=1&cgid=samsung-galaxy-s-2-cases-us
There is a balance between protection and bulk in cases
I don't want a case that inhibits the phone from venting heat. And I don't want one that is too bulky. I've tried a lot of different cases, and this is the one that I like best:
http://www.ebay.com/itm/320771114659
Just don't drop it from too high above a floor that's too hard, and it should protect the phone OK. And at this price you can get a couple of them as spares, since they will crack occasionally.
The other thing about this case is the matte rubberized finish. Helps the phone to stay put in your pocket. It also makes the phone feel much more secure when holding it in your hand.
Here's a list of many of the available i777 cases:
http://www.traemcneely.com/2011/10/...i777-samsung-galaxy-s2-sii-cases-covers-sgs2/
The SGS ballistic case is way too big and the bumpers snag in your pocket. The case mate pop is great as long as you don't mind the shiny back scratching all to hell in two weeks. Also the grey plastic around the edge flakes off really easily. The commuter is smaller than both and likes to draw dust... The thin cases will never completely protect your phone. Always had otterbox, always will keep using otterbox.
mzaur said:
Thanks! I'm looking at some TPU cases. Are they durable?
Click to expand...
Click to collapse
TPU cases have a tendency to stretch if you take them on and off too much. I had one for about 2 weeks and it was already feeling loose and I was only taking it on/off about once a day.
And they attract lint like mad. The reason I was taking it off daily was to rinse it off.
Sent from my SAMSUNG-SGH-I777 using xda premium
cheetablaze said:
Here you go
http://www.otterbox.com/Samsung-Gal...r=20&start=1&cgid=samsung-galaxy-s-2-cases-us
Click to expand...
Click to collapse
35 bucks! Damn. Not any cheaper on Amazon. That's a bit too much for me.
Thanks guys for the tips. I ordered a couple cheap hard TPU cases like some recommended here to see how they are. Perhaps I'll need more protection and look into something else.
I didn't drop my old phone a lot, but I did once in a while drop it from my desk. I don't have insurance on my GS2 so I would like some protection in case it drops since the phone feels fairly fragile.
Can anyone recommend a middle of the line case between thin TPU cases and the Ballistic? I know Otterbox is along those lines but $35 is too much!
cheetablaze said:
The SGS ballistic case is way too big and the bumpers snag in your pocket. The case mate pop is great as long as you don't mind the shiny back scratching all to hell in two weeks. Also the grey plastic around the edge flakes off really easily. The commuter is smaller than both and likes to draw dust... The thin cases will never completely protect your phone. Always had otterbox, always will keep using otterbox.
Click to expand...
Click to collapse
I agree with your line of reasoning here. I loved the Otterbox on my iPhone. I liked the hardness of it. My girlfriend had an Otterbox Defender and that was just too much. Did you pay $35 for the Otterbox?
cheetablaze said:
Here you go
http://www.otterbox.com/Samsung-Gal...r=20&start=1&cgid=samsung-galaxy-s-2-cases-us
Click to expand...
Click to collapse
35 bucks! Damn. Not any cheaper on Amazon. That's a bit too much for me.
Thanks guys for the tips. I ordered a couple cheap hard TPU cases like some recommended here to see how they are. Perhaps I'll need more protection and look into something else.
I didn't drop my old phone a lot, but I did once in a while drop it from my desk. I don't have insurance on my GS2 so I would like some protection in case it drops since the phone feels fairly fragile.
Can anyone recommend a middle of the line case between thin TPU cases and the Ballistic? I know Otterbox is along those lines but $35 is too much!
maybe the case-mate pop. conflicting reports on whether it has the right holes or not. it also has the built in kickstand
---------- Post added at 06:20 AM ---------- Previous post was at 06:19 AM ----------
oh, also, the otterbox should come down in price soon, like the intl. GS2 version has.
I have the casemate barely there and the casemate and the casemate full version. Both work great and give flexibility.
Sent from my SCH-I800 using xda premium
The Case-Mate Pop! is the best I've found. It is a hard plastic case that is lined on the inside with rubber for shock absorption. It also has rubber inserts on the outside along each edge. Has a very solid feel with good grip. There is also a fold out stand but I don't really use it that often. Nice feature to have though.
It does add a little to the bulk of the phone but not as much as the Otterbox or other heavy duty cases. I found it a good compromise between size and protection. I think it's well worth it for something that fits perfectly and feels really good in the hand.
All of the holes line up perfectly on this case even it's categorized under the International SII. The noise canceling mike on top is included in the microphone cutaway. No noticeable difference in signal quality or phone call quality.
Sorry, tried to post a link but I'm too new. You can go to Case-Mate's website and look under the Samsung Cases, Samsung Galaxy SII, International version.
I have the Casemate Barely There Aluminum, SGP Linear, and some mesh one I got for $3 on ebay. Out of all of these I prefer the SGP Linear. It completely protects the phone, leaving no edges exposed, feels like quality, and keeps the slim profile of the phone. I had to make a little hole for the noise cancelling mic but that was easy.

Best flip case for the note?

I have the little flip case right now, but it doesn't provide much protection. What would be a good flip case for my note?
Sent from the best phone in the world Galaxy Note!!!
http://www.dealextreme.com/p/protec...galaxy-note-i9220-black-115441#open full view
Somebody else posted this in the other flip case thread, might be of interest to you. The front of the flip cover seems to be exactly the same, but the back of it is an actual case that will protect your Note more.
Sent from my SAMSUNG-SGH-I717 using Tapatalk
I don't think that one will fit the AT&T version. Someone else might have to verify that, but it says it's made for the International version.
Budge said:
I don't think that one will fit the AT&T version. Someone else might have to verify that, but it says it's made for the International version.
Click to expand...
Click to collapse
I bet it does fit, as im pretty sure the discrepancy in size was probably an error in either measurement or conversion between metric and standard units. Every case people have bought for an international note so far has fit the at&t one, even the zenus capsule case, which is hard plastic.
The only things that do not work are replacement battery covers due to the difference in the location of the tabs, which what i linked to is not a battery cover.
Sent from my SAMSUNG-SGH-I717 using Tapatalk
I ordered one in red as soon as it gets here (which may be a while) I will verify if it fits the American version
just an update im still waiting in this case It has been over 4 weeks now and still no case
Finally got the case it does fit the American version
I've got this one on the way, http://kevikev.com/Yoobao-Executive-Leather-Case-Folio-for-Samsung-Galaxy-Note-LCSamNoteE.htm. I know someone that got it and he really likes it.
I ordered this one... hopefully I will like it.
http://www.ebay.com/itm/170823165039
I ordered this one, and while it's a bit expensive, it looks, feels, and is really nice.
Link
I got my wife the tridea case from ebay, its pretty nice and offers better protection than most flip cases around the sides.
I got this case on amazon. Its the Khomo Executive flip case and I can honestly say that it's by far the worst case that you could spend (little) money on. it offers almost no protection aside from the soft felt stickers on the inside. its made from really cheap hard plastic and only snaps around the edges. after putting the phone in it the for the first time, i set it on a white painted bookshelf. it immediately took white paint transfer barely sliding it across the shelf. Im sure if i left phone in there much longer it would have transferred black scratches to my white Note. It barely closes shut and front flip overlaps the edges too far. Worst of all in the design of this is that it covers the volume key. One drop in this case would probably crack the plastic edges and break the phone. Ultimate fail case!!!
gtnote said:
another example of people looking at price and not quality
Click to expand...
Click to collapse
Was that meant to be helpful? There isn't always a correlation between price and quality. Most of us look for good quality at a good price.
I think the case looks nice. It's a shame it is so cheap and unuseful.
kimtyson said:
Was that meant to be helpful? There isn't always a correlation between price and quality. Most of us look for good quality at a good price.
I think the case looks nice. It's a shame it is so cheap and unuseful.
Click to expand...
Click to collapse
That's exactly what I was going for...good quality for a good price. It looked like what I wanted. And that would be a slim tough flip case that could handle a drop or fall and protect my phone. Sadly, this wasn't it, I'll keep trying to find it. I've got a quality case which is my daily but would like a flip style w/o the bulk.
Sent from my SAMSUNG-SGH-I717 using Tapatalk
Have you looked at the cases here, http://kevikev.com/Samsung-Galaxy-Note-Cases-Batteries-Accessories_c24.htm. I just got one of each and will be doing a review. I can tell you they seem to be nice quality at a reasonble price. Shipping is fast. And the look is great.
kimtyson said:
Have you looked at the cases here, http://kevikev.com/Samsung-Galaxy-Note-Cases-Batteries-Accessories_c24.htm. I just got one of each and will be doing a review. I can tell you they seem to be nice quality at a reasonble price. Shipping is fast. And the look is great.
Click to expand...
Click to collapse
looks nice! Executive and slim?
I know leather would be more scratch resistant but I've always felt the otterbox plastic/rubber was more drop proof!
Sent from my SAMSUNG-SGH-I717 using Tapatalk
Yeah. The Executive is all leather. Gives good protection but not as stiff.
The Slim has a hard shell and leather overlay. Better protection but more stiff. The Otterbox is excellent protection but more bulk. Depends on what you are looking for.
kimtyson said:
Yeah. The Executive is all leather. Gives good protection but not as stiff.
The Slim has a hard shell and leather overlay. Better protection but more stiff. The Otterbox is excellent protection but more bulk. Depends on what you are looking for.
Click to expand...
Click to collapse
Exactly! otterbox should make a flipcase. And a slim one at that. Let us know what you think of these. I might have to forgo plastic for leather. If the slim leather fits well with nice corner protection, I'll be buying next.

Categories

Resources