Hi everyone! When updating my Galaxy 5 to Cyanogenmod via Odin i had a power breakdown. When trying to restart my phone into download-mode, it showed me a screen as seen on the picture below. I can´t connect to my PC any more, and the phone isn´t recognized by my PC. And the former Os is not reachable.What can i do to get my phone back to life?
Thanks for your answers!!
hubie53
Related
Hi guys.
Two months ago i received my phone P509 Tmobile and with the help of this forum i succesfully rooted it, installed recovery, flashed new lag_fixed_overclocking_enable kernel and everything was working fine till two days ago when it froze. Now i can not hard reset it, nor does it enters recovery mode. Also when connected to laptop drivers dosent recognize it as connected to USB. I lost already any hope but still maybe some of you can give me an advice. I have been looking on ebay even for a board replacement but can not find it. Any advice guys before buying another phone?
Thanks in advance
Can you boot into Emergency Mode?
It is done by holding the back and volume up buttons while turning on.
No, It goes directly to LG screen and stay there forever. I have tried dozen times...unsuccessfully.
Thanks for you reply
make sure your USB cable is unplugged, pull the battery, put it back in and hold the buttons ilarrain mentioned. Hold the keys down hard until you get the yellow screen. This "should" get you into emergency mode, if not then I dunno...
good luck!
chicochico said:
Hi guys.
Two months ago i received my phone P509 Tmobile and with the help of this forum i succesfully rooted it, installed recovery, flashed new lag_fixed_overclocking_enable kernel and everything was working fine till two days ago when it froze. Now i can not hard reset it, nor does it enters recovery mode. Also when connected to laptop drivers dosent recognize it as connected to USB. I lost already any hope but still maybe some of you can give me an advice. I have been looking on ebay even for a board replacement but can not find it. Any advice guys before buying another phone?
Thanks in advance
Click to expand...
Click to collapse
JUST CHK OUT THIS IT HELPS http://forum.xdadevelopers.com/showthread.php?t=883314
As long as you phone is powered on and you have the usb drivers installed on your phone, this should work. (my phone was forever stuck on the "Stick together" welcome screen and this recovered it.)
Download the V10L_00.KDZ file and the english KDZ_FW_UP program. set the mode to CS EMERGENCY, load the firmware and hit the button.
Takes about 10 minutes to force flash the phone.
Hi all,
Short and sweet.
A mate was updating their Galaxy S3 via the wireless method. He downloaded the update but only had 3% battery so could not install and clicked the 'install later' message..or something a long those lines.
Upon charging the phone and then trying to install the firmware update, the phone is now stuck in a cycle whereby you see the little green Andriod with the percentage bar. It gets to 100%, reboots and then does the same again...over and over.
It is not recognised when connected to a PC and there are some pictures on there that are very dear to his heart. Is there any way of obtaining these pictures?
Thanks.
Are they on internal or external sd?
Can he get to recovery? If yes, boot into recovery adn pull the files with ADB.
Hi There,
sometime ago i rooted my Samsung Galaxy S2 and did not know that i will not be able to udate the firmware,
i decided to unroot my device and followed instructions for one video on youtube. i downloaded odin and the firmware and tried to flash my device,
but unfortunately it failed and after several attempts my device Stuck on a screen showing mobile and computer with dotted line and s triangle showing disconnection between them. tries to press Vol - , home and power button with no luck, now my device is not working cant turnt it on or off, can not go to download mode,
any help will be highly appreciated.
attached is what i got on the stuck screen
smartman_70 said:
Hi There,
sometime ago i rooted my Samsung Galaxy S2 and did not know that i will not be able to udate the firmware,
i decided to unroot my device and followed instructions for one video on youtube. i downloaded odin and the firmware and tried to flash my device,
but unfortunately it failed and after several attempts my device Stuck on a screen showing mobile and computer with dotted line and s triangle showing disconnection between them. tries to press Vol - , home and power button with no luck, now my device is not working cant turnt it on or off, can not go to download mode,
any help will be highly appreciated.
attached is what i got on the stuck screen
Click to expand...
Click to collapse
Did you pull out the cable?
Did you pull out the battery? (Won't recommend it, wait till it dies then pull out)
If you did these things allready. Put the battery back, does it do anything? Or does it do anything when you try to recharge? If nothing (or only showing you the battery) you probably need a USB jig.
Hello People
Im in need of your help please!
The other night my battery went dead on my Samsung galaxy S3, after charging it fully, i tried to turn in on. However it was stuck in boot loop
So far i have tried everything, Ive tried
factory reset
clearing cache
putting it in download mode
taking the power button out
I downloaded kies and Odin to try and put the new firmware on, however my phone will only charge through the USB port and keeps saying windows does not reconigse the device as it is malfunctioned. I have installed all the drivers, tried computer at work, tried a different lead, but nothing!
Can anyone help me, are you able to put the firmware on through SD card as there is no way of me getting into the phone!
Thanks in advance!
Hi , I used LiveSuit to flash official JXD rom (chosed option to full wipe and then flash) , but it stock at 3% and then nothing happend after several minutes.
now tablet is dead, only LED turns on when connected to charger or usb. When i hold Menu or Power button and connect USB, pc says unrecognized device. but it seems Livesuit still can detect device connected, it can flash again but always stocks at 3% !
Is it hard bricked ? does it need JTAG and sth like that to get back to life? is there any software way to revive it, for example flashing MaPan MX913 instead?
Thanks in advance.