Hi , I used LiveSuit to flash official JXD rom (chosed option to full wipe and then flash) , but it stock at 3% and then nothing happend after several minutes.
now tablet is dead, only LED turns on when connected to charger or usb. When i hold Menu or Power button and connect USB, pc says unrecognized device. but it seems Livesuit still can detect device connected, it can flash again but always stocks at 3% !
Is it hard bricked ? does it need JTAG and sth like that to get back to life? is there any software way to revive it, for example flashing MaPan MX913 instead?
Thanks in advance.
Related
Hi, I have the phone Zopo C2. I turned off the phone and stopped responding. When connected to the charger, nothing happens. When connected to a computer is detect normally, I can flash ROM by SP flashtool. And here is the problem, as long as I want toflash, reaches the first red bar to 100% and ends flash without error. Drivers have a good, first is connected as "USB PORT MTK" and how it comes to 100% red bar that goes in the "VCOM MTK DOWNLOAD".I have a second phone zopo c2 and there I normally flash, and everything goes without problems
I tried with the removed battery inserted, all methods and nothing, always the same 100% red stripe and the end of the flash without any error.
I wanted to flash such proloader same and is the same.
Phone is brick ? Memory in phone is dead or what ?? Can still fix it?
Sorry I from Poland and my english is very bad.
Helo guys,
I tryed to change my smashed screen and with the new one it turned off after 20 seconds. I tryed to go from 4.4 to 4.2 in order to repair the bug.
I pu the phone in download mode and charged the root file bu after a time it disconect from usb by mistake.
Now the phone doesn't starts at all.
When I contect it to the PC throug usb cable the PC makes a sound as it detects the phone, but the phone its dead. Nothing works.
Odin dosen't recognized.
Is it dead? Can I do anything to make it work? Boot from sd? something?
It does not even appear to charge the battery. Nothing.
Thanks!
Hi, I have the BLU Energy X, and I had flashed some ZIP mods via TWRP. I decided that I didn't want them, and read somewhere that I had to flash my phone using the stock ROM. I used the ROM from NeedRom here: needrom[.com]/ download/ blu-energy-x-e010q which should be the correct one for my phone. It also shows the . I installed proper drivers and flashed using smartphone flash tool. It completed, and I unplugged my phone and pressed the power button. Nothing happened. No combination of power and volume buttons turn this phone on. I have tried flashing again, and I got the error "BROM ERROR : S_FT_ENABLE_DRAM_FAIL (0xFC0)". My phone does show up in Device Manager when I plug it in, as USB Serial Device (COM6) under the Ports category. Sometimes it will go in a loop of SHowing up then 3-5 seconds disconnecting from PC, then connecting again. Before I flashed I used the format option because I was getting an error, and that was the fix for it. The flash completed successfully. I did not touch the device while it was flashing, or the USB cable. I'm in grade 8 and I get a really allowance, so I couldn't buy this phone for about 8-10 months again, and I really want to avoid that. I am/was rooted, if that helps. Thanks everyone here in advance, and I really hope you guys know how to fix this! Thanks alot
Hi,
My friends oppo neo 5 went into bootloop and we decided to flash stock rom to solve it. We had done the same previously and it worked without any problems. This time after initially flashing it stayed on the boot screen itself and we decided to flash again but this time instead of download on the sptool, we used firmware upgrade and after flashing, the phone wont boot up. when we try to power it on it vibrates for 2-3 seconds and then continues to vibrate after an interval. The phone is detected in device manager when its plugged in to the pc as mediatek usb port and mediatek da usb vcom. The phone is detected in sptool and we are able to flash and it gives the green tick, but there is no use as the phone wont boot up.
hi i was doing this
and i followed everithing but in the part that i select reboot it restarts, get to the "samsung" text and then power off, then i tried to start it up with the power button but it not respond, even connecting it to my pc doesnt work. i cant go back to stock rom because i cant boot into recovery.
download and recovery mode not working, it doenst even show the samsung text or something. the screen doesnt react.
do you solved your problem ?
I got a same problem, bro. i changed rom several times. more then 10 custom i've tried, and the dead boot a10 got after trying installing pixel experience 11. my a10 A105G real dead boot. pc cannot recognising, and of course odin can not indentifying port.
Lucky for me, I tried to open the case, release battery connection. and reconnectthe battery. amazing. i try to enter download mode.... and... its work for me.
hope some ppl like us can find good solution for the dead boot A10 aftertry installing a costum rom.