Hi, I have the phone Zopo C2. I turned off the phone and stopped responding. When connected to the charger, nothing happens. When connected to a computer is detect normally, I can flash ROM by SP flashtool. And here is the problem, as long as I want toflash, reaches the first red bar to 100% and ends flash without error. Drivers have a good, first is connected as "USB PORT MTK" and how it comes to 100% red bar that goes in the "VCOM MTK DOWNLOAD".I have a second phone zopo c2 and there I normally flash, and everything goes without problems
I tried with the removed battery inserted, all methods and nothing, always the same 100% red stripe and the end of the flash without any error.
I wanted to flash such proloader same and is the same.
Phone is brick ? Memory in phone is dead or what ?? Can still fix it?
Sorry I from Poland and my english is very bad.
Related
Hello i have recently updated my ROM but sadly something happened with my service, it just said "no service" and i wasn't able to receive or take any calls so i installed this rom again from the recovery, and then when i rebooted this device, it suddenly stopped on the green goblin logo loading screen and my device was unrecognized by a PC, recovery didn't work... so i tried a RoFUSiON which can install a rom through the pc but my device, as i said, wasn't and isn't recognized anymore. What i can do? i can't even charge it, last night i connected it to the charger and let it on. When i woke up and unplugged it, it had no battery! probably it wasn't chargning, it was discharging, and the only way i can turn my mobile on, is plugging it to the usb, doesn't matter if into the power socket or usb-to-usb, even the screen lights up without the battery but still i can't go to the recovery or fastboot (probably, because as i said my device isn't recognized so either that's the problem either fastboot doesn't work). Here's also the video about this, maybe someone can help me since i don't know what to do.. thanks in advance.
http://www.youtube.com/watch?v=pzUQA-PNI4A
Hello XDA,
Its one of my first threads. I always read the threads and post first. No matter what, i always try to find the answers by myself by lurking in each and every thread... so please help me out on this one this time.
TOPIC: SONY XPERIA SP IS NOT BOOTING UP (BOOTLOADER UNLOCKED)
REASON: I DID A SYSTEM WIPE IN CWM:silly: becoz my gapps for some unknown reason ceased to sync and i wanted to remove gapps.
THE CASE: After wiping system partition in CWM i rebooted my device. It booted and the Sony logo appeared. AND IT STUCK. Period. I did a HARD RESET (pinned the hole up until 3 vibrations). The mobile shutdown and then never booted up.
I tired to enter FLASHMODE and flashed the stock FW. But it failed everytime with a msg that USB DEBUGGING is off (now how on earth do i turn on the debugging if my fone is not booting up.) and i remember very thoroughly that my USB DEBUG was on before the brick.
CURRENT SITUATION: My phone just does not repond to power button whatsoever. I kept it unplugged/unchrged for more than 40 hours as my users suggested to clear the bad data off the chip.
Whenever plugged in the wall charger it gives up a strong RED LED and then after sometime that changes to GREEN LED . Then the GREEN LED goes by itself and a constant RED LED comes.
I AM UNABLE TO GET INTO FLASH OR FAST BOOT MODE. IT JUST GIVES A RED LED WHEN I PLUG IN THE PC USB:crying:
can anyone help with unbricking lg-t385? friend gave me the phone saying it just turned itself off and after that it doesnt work (as always, nobody touched anything :/ )
when turned on it hangs at LG logo, if i remove the battery and connect it to pc the same happens although by the plugged in sound on the pc you can tell that the phone is connected, it even shows up in device manager. if you remove the battery and plug in a wall ac charger the same happens, phone turns on and hangs at the logo. tried pressing all the combination of keys to get to recovery or hard reset. nothing works.
flashing, rooting, unbricking etc is not new to me, but this is my first lg and first non android phone for that matter.
tried flashing with LG Mobile Support Tool without luck cause it doesnt recognize the phone.
can someone please help, or just point me in the right direction as to how to reset it to factory or flash stock?
thanks in advance
nobody?
Hi, I have the BLU Energy X, and I had flashed some ZIP mods via TWRP. I decided that I didn't want them, and read somewhere that I had to flash my phone using the stock ROM. I used the ROM from NeedRom here: needrom[.com]/ download/ blu-energy-x-e010q which should be the correct one for my phone. It also shows the . I installed proper drivers and flashed using smartphone flash tool. It completed, and I unplugged my phone and pressed the power button. Nothing happened. No combination of power and volume buttons turn this phone on. I have tried flashing again, and I got the error "BROM ERROR : S_FT_ENABLE_DRAM_FAIL (0xFC0)". My phone does show up in Device Manager when I plug it in, as USB Serial Device (COM6) under the Ports category. Sometimes it will go in a loop of SHowing up then 3-5 seconds disconnecting from PC, then connecting again. Before I flashed I used the format option because I was getting an error, and that was the fix for it. The flash completed successfully. I did not touch the device while it was flashing, or the USB cable. I'm in grade 8 and I get a really allowance, so I couldn't buy this phone for about 8-10 months again, and I really want to avoid that. I am/was rooted, if that helps. Thanks everyone here in advance, and I really hope you guys know how to fix this! Thanks alot
Hi there, I'm using Otus the 3g version, I recently got it but is a used phone, there was a popup for official update and when I updated it, it installed from recovery, and turned off after that it never turned on, nothing happens when i connect phone with charger, I cannot go to fastboot or recovery, sometimes when i connect to pc it goes to EDL mode (I can see the device in device manager ) is there a fix for this ?
Sometimes when I connect charger there is a light yellow/white LED flashing for sometime and then the phone dies
Please help me!!
thanks:crying:
More info : phone 's bootloader is locked and its not rooted
I think you may have hardbricked your device just like mine. The white LED flashing is because of no battery. I had the same issue in August. Unfortunately there is no possible fix for a hard brick. Myself and some other Members of the Moto E 2015 community have tried coming with a solution but in vain.
balajithegreat said:
Hi there, I'm using Otus the 3g version, I recently got it but is a used phone, there was a popup for official update and when I updated it, it installed from recovery, and turned off after that it never turned on, nothing happens when i connect phone with charger, I cannot go to fastboot or recovery, sometimes when i connect to pc it goes to EDL mode (I can see the device in device manager ) is there a fix for this ?
Sometimes when I connect charger there is a light yellow/white LED flashing for sometime and then the phone dies
Please help me!!
thanks:crying:
More info : phone 's bootloader is locked and its not rooted
Click to expand...
Click to collapse
i will be helping you guys
go to this thread
https://forum.xda-developers.com/moto-e-2015/help/loader-img-to-unbrick-moto-e-otus-t3709769