I somehow messed up my photon. It says failed to boot 2 starting RSD mode. I try to use RSD lite, and flash the sbf and it fails to re-enumration (sorry forgot how to spell it) But when I pull the battery and it boots back into rsd mode I tried to flash derpunlocker and it says failed to boot 0x2004 after it boots back up. I can't figure out what I am doing wrong. Any help would be appreciated. (Sorry if I sound dumb)
jokerofchaos said:
I somehow messed up my photon. It says failed to boot 2 starting RSD mode. I try to use RSD lite, and flash the sbf and it fails to re-enumration (sorry forgot how to spell it) But when I pull the battery and it boots back into rsd mode I tried to flash derpunlocker and it says failed to boot 0x2004 after it boots back up. I can't figure out what I am doing wrong. Any help would be appreciated. (Sorry if I sound dumb)
Click to expand...
Click to collapse
Is your photon unlocked? Does it show "unlocked" when you turn on your device? You might be able to flash the recovery if unlocked and then flash a rom
No it doesn't say unlocked. It gives me some weird thing when trying to unlock it.
Svf 116:1:2
and then something about sec_exception b655
I will try to take a picture of it somehow to show or get the exact error it is giving me. Because it won't do anything but give me errors in rsd lite.
Sounds like you flashed the electrify bootloader unlock. Double check the file you flashed when you started getting this error.
Sent from my MB855
devastatorx said:
Sounds like you flashed the electrify bootloader unlock. Double check the file you flashed when you started getting this error.
Sent from my MB855
Click to expand...
Click to collapse
It is supposedly the one for the photon. I checked it again to make sure.
I tried it just a minute ago. I was using derpunlocker.sbf It gave me the error on my phone (i'd take a picture but I don't have a way) The error it is giving me is
SVF: 106:1:2
sec_exception: b655, eddc, eb
On rsd lite it says phone did not re-enumerate after RAM downloader was sent. (0x703E)
Go get 4.5.1A-1_SUN-198_7. Go back to Stock!!!
dsims7_2000 said:
Go get 4.5.1A-1_SUN-198_7. Go back to Stock!!!
Click to expand...
Click to collapse
I've tried that before and it gives me the same error, but I will try one more time.
OK, take a deep breath!!!
I'm uploading zip file you need. Not to insult you, take it, unzip it where you know where it is. (f**k, file too big, get if from Shabby!)
1. (Important) Make sure you charge your battery 100%
2. On PC, bring up RSDLite, upper left side, open that file. After you open it, it should come up in large box on upper right!
3. Holding down Voulme Down Button, power on phone, keep holding both down. You will see "Fastboot". release buttons. press volume down until you see "Android Recovery". Press the power button.
4. You will get triangle with "!" in the middle and little green android dude. Hook phone up to computer.
5. On Phone, Press Volume up and down at same time!
6. On computer in RSDLite, phone will come up in bottom box. click it. You shouldl see in on left next to box in step 2 above.
7. On phone, there is an option to initialize or something, do that. (cannot remember the exact words? sorry)
8. On Computer, upper right of RSDLite, click button to flash or install (again, I cannot remember exact words)
Go get a beer and come back in 30 minutes, all good. I actually came back every 5 minutes and shook the mouse so desktop did not go to sleep!)
Oh, I forgot, do not use USB on front of desktop, not enough power.
Trust me, it took Shabby, Joker, and Deedscreen 2 days to un-f**k me, I know the feeling of having a brick! anything else my e-mail is [email protected] and I got ya!
It gave me an error again. Should i use a desktop instead of a laptop? And does it matter if I have a sd card in the phone?
jokerofchaos said:
It gave me an error again. Should i use a desktop instead of a laptop? And does it matter if I have a sd card in the phone?
Click to expand...
Click to collapse
I left my SD card, nothing on it anyway!
You might want to use Desktop. I was reading somewhere NOT to use USB on front of Desktop, use USB on back because they have more juice? You might have same issue with Laptop? Matter fact, I did have issues with laptop, but I think it was more security with job?
It gave me the same error as before on the desktop. My mom's step brother is going to take a look at it today and might fix it for me. If he does I will post any info on it that could help.
Did you do step 7 of my instructions BEFORE you tried to connect the phone? That, more or less, gets rid of EVERYTHING and prepares for flash. I cannot remember exactly what the wording is, but there are like 10 Options. All of them are blank except THAT one! you need to let that complete before going to RSDLite.
Also, remember, you need a good battery charge!
I was able to fix it by flashing it, but now it is motorola electrify. Appearently i flashed the 235pudding on accident, and thats what messed it up. I do have it working now, but it sucks cause the bootloader is locked and i don't have a custom recovery but for the most part i am happy to have the phone back lol
What if it is not letting you charge nor holding power and volume down just makes it go black screen?
From the edge of time and space.
Heavy Metal said:
What if it is not letting you charge nor holding power and volume down just makes it go black screen?
From the edge of time and space.
Click to expand...
Click to collapse
Is the battery dead?
Related
In anticipation of flashing Eugene's MacNut with GPS working, I managed to somehow got to the point where the phone will now not even boot up. I did a factory reset, "Linda" said "complete", then when I rebooted it did so but then shut off. I was able to get to Odin via reboot download, I flashed back to stock, but when it rebooted it shut off again. Now I cannot get the phone to boot up, either normally or in to recovery. Anyone ever have this experience, and is there any way out? TIA.
New issue...
Good to see that nobody else had this problem. Fortunately I found out how to get into download mode. I may have successfully (maybe?) reflashed stock through Odin. However, when I reboot the screen goes black and the phone turns off. I've spent hours trying to find the exact type of potential issue I have, and none of them get me past where I'm at now. The most promising I found was this one
http://forum.xda-developers.com/showthread.php?t=811820
but I am not exactly sure of the sequence: constant "adb push update.zip /sdcard" that I should be doing. Like, how many times do I do this? When I push the power button while in recovery it (obviously) just reboots, which is what it is supposed to do. Am I trying the wrong thing/ in th wrong thread? TIA.
This worked for me, but it re-partitions, so you'll lose your data.
http://forum.xda-developers.com/showthread.php?t=803492
I was also trying to find the instructions where you odin "froyo that doesn't brick" and then odin the original, but I don't see it now.
if you need to get into download mode, use Eugene's method:
pull battery and leave it out
plug in the usb to the phone and the computer
hold volume +/- key
insert battery while holding the volume key
burgon said:
This worked for me, but it re-partitions, so you'll lose your data.
http://forum.xda-developers.com/showthread.php?t=803492
I was also trying to find the instructions where you odin "froyo that doesn't brick" and then odin the original, but I don't see it now.
if you need to get into download mode, use Eugene's method:
pull battery and leave it out
plug in the usb to the phone and the computer
hold volume +/- key
insert battery while holding the volume key
Click to expand...
Click to collapse
Hey, thanks for the reply. I am able to get in to download. I'm uploading the file now, it's a big one. We'll see when it's done. Thanks again.
wbexpress said:
Hey, thanks for the reply. I am able to get in to download. I'm uploading the file now, it's a big one. We'll see when it's done. Thanks again.
Click to expand...
Click to collapse
Oh well, so much for the theoretical impossibility of bricking a Vibrant. I did the whole YouNeek fix, no go. It still does the same thing as it has since I screwed it up, it turns on, reboots and then goes black. Oh well, I think I've about had it with Samsung. The screen is awesome, but the OS is just not user friendly. The irony is that when I bricked this thing I took the SIM out and threw it back into my G1, which I have NEVER had an issue with. HTC...
I had the same issue you had, boots, screen goes black but buttons still light up. I posted the fix in a few different threads, one of which I started myself. If you search for threads I've started your fix will be there. You have to flash eugene's "froyo that will not brick" through odin and then flash the stock rom again through odin. Check my thread for a link to the exact instructions. I fix my phone in about 5 minutes once the roms were downloaded and happily shipped my replacement back so I won't have to pay the $20 in shipping
Today was I was watching the video on how to flash darky's resurrection.zip rom,
then zi tried flashing it to my wifes Vibrant , I folloeed the video step by step. I used odin I get the green light saying the phone passed then when it reboots it get stuck on the galaxyi900 screen and it doesnt boot up. Ive flashed the thing with odin at least 10 -15 times after and still no luck, it keeps getting stuck at the opening. My wife says if I dont fix it I have to buy her a new phone. Someone save me please!!!!!!
LMAO........... yeah my wife said the same thing...... sounds like you may have not disabled the voodoo lagfix before the flash.
you will probably need to flash back to stock. I am not sure what is stock on this phone I am going to assume it is the same Vibrant.
If you can get into recovery and you did have voodoo installed disable it. If not you can disable it on your phone and copy the folder and then load it into the internal sd card messed up phone and replace the old folder.
Then you may need to use Eugenes froyo that does not brick as a intermediary flash. if you can Odin that (use Odin 1.7) then when it you flash it do not check the repartition box. When it is beginning to reboot, do not let it fully reboot, pull the battery. Then Redo the Odin as described below:
Open Odin.exe and plug a usb cable to your computer that will connect to your phone (do not plug it in to the phone yet, just the computer)
Hold down both volume buttons at the same time and while holding them down plug the usb into your phone. You should see a COM message show up in Odin.
Leave all check boxes the way they are. Check the repartition box.
Click the PIT button and select the 512.pit file
Click the PDA button and select T959JFD.tar and then click Start
When it is done you will be back at stock. Then Root the phone and go from there.
still getting the loop! this phone is jacked up. I can enter download without pressing the power button, cause it turns on and off itself
My phone just keeps flashing the opening Samsung galaxy s gt-i9000
Oh good I don't know the pit or .tar files sorry
Sent from my SGH-T959 using XDA App
Omar50 said:
still getting the loop! this phone is jacked up. I can enter download without pressing the power button, cause it turns on and off itself
Click to expand...
Click to collapse
take the battery out, wait 30 seconds, plug the usb cable in, and then hold both the volume buttons and slide the battery in. Presto! Download mode.
This has saved me numerous times lol. Then just flash JDF like oka said
i dont have problem entering download mode. When I flash with odin I get a pass on it. but when the phone reboots it stays on the opening screen go on and off
i download the heimdall suite 1.1.1 and the necessary windows program to run it. when i plug my phone into download mode heimdall start button isn't accessable. am i missing something?
figured out hoew to get access to start button, dont use partition. now it gets error on recognizing the device. Im so frustrated right now I need a smoke!!!!!!!
Omar50 said:
figured out hoew to get access to start button, dont use partition. now it gets error on recognizing the device. Im so frustrated right now I need a smoke!!!!!!!
Click to expand...
Click to collapse
Depends on what you smoke........
You may need the pit 513 file instead of the pit 512 file, these mapping files are a bit different and it may be a cause. Hard to know without seeing the phone
Also you could do a full wipe if you can get into recovery, wipe cache, phone reset and dalvik wipe (in advanced) then try That may work better for you.
It is recoverable.......... and also the best way to get your wife to calm down......... a romantic restaurant with candle light........ you go on Tuesday and she goes on Thursday........
Hope you get it fixed..........
thanks for the support but no luck I tried 513 pit nothing my phone still wont boot up I still get the opening screen then it shuts off and starts again.
im really having a bad day now i tried flashing the stock rom 2.2 with odin now the phone wont even power on! i guess its really a brick. i bought myself a paper weight
I tried to return my atrix to factory by flashing with RSDlite, i did it exactly as the instructions stated. Once it started i walked away and let it go, it went for hours and when i came back and checked on it, it said it failed. The phone is now left in state that it wont power on. It will get a green light when power is applied. I tried to power on with volume up for rsd, no luck. I also tried with volume down for recovery, no luck either. Any ideas? I left battery out all night and no luck. Computer detects the device when connected.
jasunto said:
I tried to return my atrix to factory by flashing with RSDlite, i did it exactly as the instructions stated. Once it started i walked away and let it go, it went for hours and when i came back and checked on it, it said it failed. The phone is now left in state that it wont power on. It will get a green light when power is applied. I tried to power on with volume up for rsd, no luck. I also tried with volume down for recovery, no luck either. Any ideas? I left battery out all night and no luck. Computer detects the device when connected.
Click to expand...
Click to collapse
Plug it into a wall charger for a few hours. Next time dont leave it that long either. Takes like 10 minutes. You should be fine once the battery is charged.
Keep us posted if that works or not.
You stated that your pc still detects the phone. Does RSD still detect the phone? What SBF did you use? 1.26 or 1.57 as there is no full SBF for 1.83 that i am aware of just a 1.83 update. If RSD detects the phone, load the 1.57 full SBF and click start. Should reboot the phone into RSD on its own and continue. once RSD is done you should have a Atrix thats fully booted up and ready to go. Like stated above it should only take 10 minutes or so complete.
Side note: Make sure your screen saver is off and the pc wont hibernate, Ive had my screensaver kick on while flashing and caused a hiccup between RSD and my phone and gave me a nice shiny brick. easily recovered though.Dont have any other programs running that use a lot of pc processing power as well.
Yeah, definitely watch it while it's flashing too. It tells you to reboot it while it's still plugged in then it'll tell you whether it's success full or not after it does the initial boot.
Some people report needing to use a short file name for the actual SBF as well. If you're at this point you're completely in the clear. It's just very nerve racking until you've finally flashed and restarted the phone. You'll be fine but keep us posted.
Since we're on the topic of RSDlite..everytime I try to flash a radio..i get to the part where it asks me to Manual Reboot..and no matter how many times I do it (whether by pulling the battery or just doing a power down) it just sits there telling me to manually reboot. Is there something i'm missing there or have others experienced this as well?
not for me, usually after i manually reboot the phone, it would report as a pass about 10-15sec after the phone was done rebooting
Rickroller said:
Since we're on the topic of RSDlite..everytime I try to flash a radio..i get to the part where it asks me to Manual Reboot..and no matter how many times I do it (whether by pulling the battery or just doing a power down) it just sits there telling me to manually reboot. Is there something i'm missing there or have others experienced this as well?
Click to expand...
Click to collapse
The phone automatically reboots for me, but RSDLite says manually reboot. Just leave it alone at that point and it should reboot on it's own. I have had occasion where it has sat with that message even after reboot, and I can see it has completed the flash, so I just shut down RSDLite ignoring the warnings it throws up. Not good advice I know, but RSDLite does seem to throw you a curve ball sometimes at the end of the flash process.
CaelanT said:
The phone automatically reboots for me, but RSDLite says manually reboot. Just leave it alone at that point and it should reboot on it's own. I have had occasion where it has sat with that message even after reboot, and I can see it has completed the flash, so I just shut down RSDLite ignoring the warnings it throws up. Not good advice I know, but RSDLite does seem to throw you a curve ball sometimes at the end of the flash process.
Click to expand...
Click to collapse
I get the exact same thing every time I use RSD. It always tells me to manually reboot the phone after RSD itself already rebooted it. I was worried the first couple times. I have flashed multiple atrix's multiple times with the same end result and reboot message so I dont think it really means anything other than telling you it wouldnt hurt to reboot it again manually. If its my phone I just yank the cord and go about my day, if its not my phone I do it for good measure.
When RSD tells you to manually reboot at the end of flashing it means reboot into RSD mode. If you do this, it'll give you the "passed" message. However, as others have stated. It's not necessary to do this since if you make it this far, the flash was successful already.
hobbs0724 said:
When RSD tells you to manually reboot at the end of flashing it means reboot into RSD mode. If you do this, it'll give you the "passed" message. However, as others have stated. It's not necessary to do this since if you make it this far, the flash was successful already.
Click to expand...
Click to collapse
I have had the "passed" message after the phone rebooting without my manually doing it on a couple of occasions. I have never rebooted into RSD mode after flashing a sbf.
To the OP, the flash was fine but your battery drained. Plug to wall and charge it for a while then turn it on.
Sent from my MB860 using XDA App
I had tried to flash the stock webtop on my atrix 4g, after i had done the webtop mod(due to the screen presses from the phone would not work, and it also would not allow me to have the normal functionality and so i wanted to go back to stock for webtop). Not too sure if I'm able to post the link to where i found the instructions, but i did get it from atrix forums.
But pretty much now, when i turn my phone on, it gets stuck on the Motorola screen with text saying...
Failed to boot 4
Starting RSD Mode
I did read up and saw that from my POV, the best thing would be to get the stock sbf and use RSD Lite and flash it back to the beginning. But a few things do come up,
I found a thread in XDA where it had all the sbf i could want, but they were uploaded into filesonic which will not let me download it.
Would this be the only option for me to go?
Also some background into phone, AT&T Atrix 4g, was running 2.3.4, firmware 4.5.91 and was rooted. Any enlightenment on my pridicament would be much appreciated. Thank you for your time in reading.
First, did you have an unlocked bootloader?
If not, that's your problem.
Second, is there an option to get into recovery?
If so, try to perform a "Factory Reset" within the recovery before trying to use RSD lite (not recommended).
Dilphat said:
I had tried to flash the stock webtop on my atrix 4g, after i had done the webtop mod(due to the screen presses from the phone would not work, and it also would not allow me to have the normal functionality and so i wanted to go back to stock for webtop). Not too sure if I'm able to post the link to where i found the instructions, but i did get it from atrix forums.
But pretty much now, when i turn my phone on, it gets stuck on the Motorola screen with text saying...
Failed to boot 4
Starting RSD Mode
I did read up and saw that from my POV, the best thing would be to get the stock sbf and use RSD Lite and flash it back to the beginning. But a few things do come up,
I found a thread in XDA where it had all the sbf i could want, but they were uploaded into filesonic which will not let me download it.
Would this be the only option for me to go?
Also some background into phone, AT&T Atrix 4g, was running 2.3.4, firmware 4.5.91 and was rooted. Any enlightenment on my pridicament would be much appreciated. Thank you for your time in reading.
Click to expand...
Click to collapse
unlocked bootloader, that would be a negative. I guess that was what happened as to why i'm in this situation. But trying to get it back to factory settings, when i turn on the phone and hold down power button and vol down, it shows the Motorolla screen, i keep holding it down...it never shows the option for fast boot or the menu to change to be able to get it back to factory. Unless I'm doing it wrong, but it goes to Motorola screen then waits a bit and then screen turns off. Any ideas? If RSD Lite is not recommended, what's a good try to take? thanks for replying back quite fast.
Just to confirm the steps:
1. Press and hold the volume down button
2. Then press the power button (note: you don't need to continue holding the power button when doing this)
3. Continue holding the volume down button until it says "Fastboot"
If that's what you did then that would be correct. Actually, try just booting it normally and see if it gives you any options while booting.
Dilphat said:
unlocked bootloader, that would be a negative. I guess that was what happened as to why i'm in this situation. But trying to get it back to factory settings, when i turn on the phone and hold down power button and vol down, it shows the Motorolla screen, i keep holding it down...it never shows the option for fast boot or the menu to change to be able to get it back to factory. Unless I'm doing it wrong, but it goes to Motorola screen then waits a bit and then screen turns off. Any ideas? If RSD Lite is not recommended, what's a good try to take? thanks for replying back quite fast.
Click to expand...
Click to collapse
When I let it boot up without pressing anything, it just says
"Failed to boot 4"
"Starting RSD mode"
When i hold down vol down button for a bit nothing. I did notice though if i press the vol down button directly after i get "failed to boot 4" it blinks something real quick and then the screen goes black(which then i would have to take out the battery and put the batter back in). ...but what flashes, i believes says nvflash.
If i press volume up button after it says "Failed to boot 4" it gives me..
"Starting Fastboot protocal support"
So with no touch, "Starting RSD mode".
Vol down, I think it says nvflash
Vol up, Starting fastboot protocal support.
Well, when it says "Starting Fastboot protocol support" it means it is in fastboot but I don't know for sure what you could do from other than "fastboot -w" which would erase userdata and cache. Do you have the fastboot files? Have you thought about trying to flash Pudding if you can get it into RSD mode? You could then flash a custom recovery in fastboot from that point and either try to factory reset or flash a custom rom/fruitcake.
Dilphat said:
When I let it boot up without pressing anything, it just says
"Failed to boot 4"
"Starting RSD mode"
When i hold down vol down button for a bit nothing. I did notice though if i press the vol down button directly after i get "failed to boot 4" it blinks something real quick and then the screen goes black(which then i would have to take out the battery and put the batter back in). ...but what flashes, i believes says nvflash.
If i press volume up button after it says "Failed to boot 4" it gives me..
"Starting Fastboot protocal support"
So with no touch, "Starting RSD mode".
Vol down, I think it says nvflash
Vol up, Starting fastboot protocal support.
Click to expand...
Click to collapse
So what are the chances of me getting a hard brick if i did the RSD Lite as what was proposed in other occurences?
Also with pudding, do I need anything done special on the phone...unlock bootloader or anything else? just want to make sure, since i don't want to be in this situation again or worse lol.
Also, what do you mean by if i have the fastboot files? such as the ones i used to root the phone?
There's really no measurement of risk for using RSD lite. If used properly it should go without a hitch but there have been "rare" occurrences of things going wrong. If you can find the correct sbf(2.3.4-4.5.91 signed) and download the current RSD then you should be fine
Pudding is the unlocked bootloader.
Fastboot files is what is needed to give commands in fastboot mode. (eg. "fastboot.exe")
Dilphat said:
So what are the chances of me getting a hard brick if i did the RSD Lite as what was proposed in other occurences?
Also with pudding, do I need anything done special on the phone...unlock bootloader or anything else? just want to make sure, since i don't want to be in this situation again or worse lol.
Also, what do you mean by if i have the fastboot files? such as the ones i used to root the phone?
Click to expand...
Click to collapse
is it that hard to find a signed sbf for 2.3.4 4.5.91 at&t?
Also, what would be the benefits of going the pudding way versus if i just attempt the rsd way?
which one is safer? lol
Pudding, in a sense, is safer as it will unlock your bootloader and you can flash ROMs all day with a custom recovery but it would help to have the appropriate knowledge before diving in. You mentioned you had rooted your phone but what else, as far as modding, are you familiar with?
I actually tried to find an sbf to link to for you but couldn't find one.
Dilphat said:
is it that hard to find a signed sbf for 2.3.4 4.5.91 at&t?
Also, what would be the benefits of going the pudding way versus if i just attempt the rsd way?
which one is safer? lol
Click to expand...
Click to collapse
well this atrix 4g is my first android based phone. As far as modding, i came from the winmo scene. from a fuze to tilt 2 to this atrix. thanks for actually trying to look for a sbf, i was able to find one not on filesonic...
http://www.4shared.com/archive/viniGE9x/1FF-olympus-user-234-4591-1106.html
but just not sure if it is the appropriate one needed. also, while i was at work, i did try and see what i could find on pudding and found a thread in regards to it, but nothing too much in detail about it. except for a if you don't understand any of the top 3 reasons then do this lol.
live4nyy said:
Pudding, in a sense, is safer as it will unlock your bootloader and you can flash ROMs all day with a custom recovery but it would help to have the appropriate knowledge before diving in. You mentioned you had rooted your phone but what else, as far as modding, are you familiar with?
I actually tried to find an sbf to link to for you but couldn't find one.
Click to expand...
Click to collapse
And what i'm getting when looking up pudding is this...
http://forum.xda-developers.com/showthread.php?t=1136261
and it looks like i still have to run rsd lite o_0, i'm so confused lol
Dilphat said:
well this atrix 4g is my first android based phone. As far as modding, i came from the winmo scene. from a fuze to tilt 2 to this atrix. thanks for actually trying to look for a sbf, i was able to find one not on filesonic...
http://www.4shared.com/archive/viniGE9x/1FF-olympus-user-234-4591-1106.html
but just not sure if it is the appropriate one needed. also, while i was at work, i did try and see what i could find on pudding and found a thread in regards to it, but nothing too much in detail about it. except for a if you don't understand any of the top 3 reasons then do this lol.
Click to expand...
Click to collapse
Failed to boot 4
Just in case someone else get's this error.
I used this sbf. at&t signed 2.3.4 4.5.91
http://www.4shared.com/archive/viniGE9x/1FF-olympus-user-234-4591-1106.html
and RSD Lite v5.6
From there when phone got to the motorola screen and said
"Failed to boot 4"
"Starting RSD Mode"
ran RSD with the sbf, it went through it's thing and it worked. it did revert everything that was done when the phone was rooted, and there is no root.
BTW, thanks for the help live4nyy!
live4nyy said:
There's really no measurement of risk for using RSD lite. If used properly it should go without a hitch but there have been "rare" occurrences of things going wrong. If you can find the correct sbf(2.3.4-4.5.91 signed) and download the current RSD then you should be fine
Pudding is the unlocked bootloader.
Fastboot files is what is needed to give commands in fastboot mode. (eg. "fastboot.exe")
Click to expand...
Click to collapse
edit* got the phone rooted again. now my problem is, webtop is gone lol. any thoughts on how to reinstall it?
Weird, the SBF file should of had that included. How big(MB) was the SBF file?
Dilphat said:
edit* got the phone rooted again. now my problem is, webtop is gone lol. any thoughts on how to reinstall it?
Click to expand...
Click to collapse
after extracted it is 1.46gb
live4nyy said:
Weird, the SBF file should of had that included. How big(MB) was the SBF file?
Click to expand...
Click to collapse
That sounds about right. How are you trying to access webtop? Do you have a lapdock or are you trying to just plug it into a monitor with the HDMI cable?
Dilphat said:
after extracted it is 1.46gb
Click to expand...
Click to collapse
I just figured out what i did wrong, i didn't have my hd multimedia dock plugged in lol
live4nyy said:
That sounds about right. How are you trying to access webtop? Do you have a lapdock or are you trying to just plug it into a monitor with the HDMI cable?
Click to expand...
Click to collapse
Major "derpage"...
Glad you got it working.
Dilphat said:
I just figured out what i did wrong, i didn't have my hd multimedia dock plugged in lol
Click to expand...
Click to collapse
I know right, and yup...I'm glad I got it working as well. but yup, in case it happens to anyone else, i put up the link to the sbf. just in case lol.
Now this gives me time to read up into unlocking the bootloader and flashing roms
live4nyy said:
Major "derpage"...
Glad you got it working.
Click to expand...
Click to collapse
My device is: Motorola atrix 4g mb860 AT&T.
I used my phone as usual, and it seemed it went out of battery (possibly), when I tried to power it up it said:
"Failed to boot 2
Starting RSD mode" and got stuck, however, if I take out the battery and try to power it up again it will show the same issue, I cant enter the fastboot protocol support if powering it up while holding the volume up key, it just stucks, I cant either enter the selection of modes if powering it up while holding the volume down key way, it brings me to a black screen.
Ive read about this RSD Light and stuff, tried to flash 3 different sbf files, or more, after trying to flash it shows this in the device:
"Failed to boot 2
Starting RSD mode
sec_exception febe 35, 35", the phone get stucked, and in the program it says "FAILED" under the tab "Result", however, it happens only after the status of the phone in the program "Waiting for re-enumeration" changes to "Failed flashing process. Phone[0000]; Phone did not re-enumerate after RAM-downloader was sent. (0x703E)".
When i take the cable of the phone out and do a restart to it, I'm back to the first problem at the beginning, Failed to boot 2, Starting RSD mode.
It seems someone had a samiliar problem to me, but he used clocked and stuff... his thread:
http:/ /ww w.atrixforums.com/forum/rescue-squad/6164-se-flash-olympus-help.html
DELETE SPACES.
Waiting for answers, thanks anyway, and have a good day, Matan.
Sorry mate,sounds like a soft brick.
you can try flashing a stock SBF
Well can you help me with this?
BoriDe said:
Sorry mate,sounds like a soft break.
you can try flashing a stock SBF
Click to expand...
Click to collapse
well, then can you help me get these files? i used mine SBF files and didn't worked, maybe yours will.
I'll try your SBF files if needed.
mtnjustme said:
well, then can you help me get these files? i used mine SBF files and didn't worked, maybe yours will.
I'll try your SBF files if needed.
Click to expand...
Click to collapse
I´m in the same problem here, did you get out of this trouble ?
iddpioneer said:
I´m in the same problem here, did you get out of this trouble ?
Click to expand...
Click to collapse
Search das8nt on yahoo or something, you'll find it. Or just simply run a search for atrix sbf instead of being lazy
Sent from my MB860 using xda app-developers app