Hey ,
Few days ago I downloaded a game (Forgot name) and it installed NET Compact Framework for me automatic.
But now I made a hard reset and everything is gone also the Net Compact Framework.
So any know one's where I can download the file ..
Ty anyway
Greets ,
Mkaay12
.NET CF 3.5 you download from Microsoft directly
http://www.microsoft.com/download/en/details.aspx?id=65
Related
I need to get .net compact framework 2.0 on my 8525 in order for my ifonz to run but all the links I have tried to download from do nothing. I click on the download link and it opens up the thank you page but I am never prompted to save or run the setup.
Rob D said:
I need to get .net compact framework 2.0 on my 8525 in order for my ifonz to run but all the links I have tried to download from do nothing. I click on the download link and it opens up the thank you page but I am never prompted to save or run the setup.
Click to expand...
Click to collapse
yes you need to run that file while plugging your phone to the pc with active sync. or you can get the cab from my 4shared I think if not I will upload will check shortly.
I finally got it. I had to download the file then unzip it then transfer it to the phone. I guess the phone didn't like the zip file format :/ got the ifonz program working great now.
Hello All,
First off I want to say I have done a lot of searching in this forum and many others concerning my problem. My problem is trying to switch the TF3D theme from the stock verizon theme to the original black. From what I have read, I have been instructed to dl Diamond TF3D Config Setup, which I did many times. It loads successfully, but when I launch the program it gives me an unexpected error message. Does anybody know what is going on and how I can fix it? Does it have to do with it being a verizon phone; ifso, how can I change my theme?
Thanks.
Hello Noobie
Yea you need to delete the tweaks and it should work. You should also switch your roms. Verison software is horrible-by far the worst. Very slow.
Thanks alot. Its just that one file within the cab right? So I would delete this before putting it on my phone and running it?
Also, I really do want to flash the ROM, but I'm still not sure which one to use. Any recommendations? Are they stable enough at least as much as the stock rom? I just don't want to flash a rom with hella stuff on it that takes up memory and compromises stability and reliability.
Thanks again.
You need to install .Net 3.5 in order for Diamond tweaks to work. Search for .net framework 3.5 and install that first.
i already intstalled 3.5. still did not work. but i have not tried deleting the tweak file. im just not sure if ineed to delet on my computer before i move the cab to my phone and run it.
hi guys can any one till me where can i downmoad the full file of .Net 3.5 ? i mean the 37mb file not the 2.6mb from microsoft website. i have internet only in my phone and i ca't have access to pc with internet. so if anyone can till me where to find the full size .net 3.5 to download i will be thankfull
mytheory. said:
i already intstalled 3.5. still did not work. but i have not tried deleting the tweak file. im just not sure if ineed to delet on my computer before i move the cab to my phone and run it.
Click to expand...
Click to collapse
Yeah, after you have it installed, go out and delete that tweak file and it will work like a charm.
jus use tf3d configuration,works all the time for me
Using tweaks
I stumbled across this zip file the other day.If u wana use the tweak just replace the tweaks.xml with this one. Im not sure who credit for this file belongs to. But if it is yours or u know whos it is let me know and i will definitely give credit where it's due.
help with themes
So have i been searching around for a while and have not been able to figure out what the hell i'm doing wrong...
i installed DiamondTF3d conf tool, i downloaded some themes (.cab(s)) but i was not able to find them while going through TF3D config. I'm sure it's something simple i'm not dong, any help would be appreciated.
well the one i used (the Htc black) was a .theme i think
i tryed everything and nothing seemed to work i got a 8525 im trying to flash a new rom i dont it 10 times or more on a 8125 first i put a new framework on my phone.. first i tryed 2.0 then tryed 3.5 but when i go and run the hard-spl-v7 its just saying "file or assembly name 'system version=2.0.0.0, culture=neutral, publickeytoken=b77a5c561934e089 or one of its dependencies, was not found ten i push quit then says the application failed to load required components if the .net compactframework is installed on a storage card pleaseensure is in place and launch the application again if tis fails a re installation of the net framework is recommended support info -2144783643 (80000005) and if i try to click on a rom all it says is te application failed to initialize properly (0x0000135) click on ok to terminate the application i tryed looking all over te forums and cant find nothing about it so plz help me
If you installed the .net framework to an SD card, re-install it to the Phone. These system files AREN'T to be installed anywhere but main memory...
You also need to install Hard SPL V7 on it too... This gives you a safety net if and when things go wrong with the flash, never gonna be 100% safe but better odds of recovery if Hard SPL V7 is installed...
Cheers...
thanks alot im going to try it out again.... i just wish it was as easy as the ones i done on the 8125 wizard
Pls, can some sympathetic soul provide me with idiot proof instructions on how to install .NET compact framework v3.5 onto my HD2 so i can upgrade to install CHT EDITOR whichever latest version so i can jazz up my homescreen ! I am at my wits end trying to figure it out, HELP !! rdavi
rdavi said:
Pls, can some sympathetic soul provide me with idiot proof instructions on how to install .NET compact framework v3.5 onto my HD2 so i can upgrade to install CHT EDITOR whichever latest version so i can jazz up my homescreen ! I am at my wits end trying to figure it out, HELP !! rdavi
Click to expand...
Click to collapse
Hi
put your hd2 into active sync mode with windows mobile device center. The net compact framework should be on you desktop computer/laptop. Just run it up (Double click) and follow the on screen instructions. On the HD2 you will see it there asking if you wish to install it to Main or Storage card. Just install to main. it will finish, so just exit by the X button on the top right on the screen. Thats all there is to it.
Russ
13. Install Compact Net Framework 3.5 to Make Old Apps Work Again
Some apps you may have used on another phone will not work on the Leo unless you install Compact Net Framework to your phone. Download the cab from the following link and install to Device only - not Storage Card and then reset. http://tinyurl.com/38thahw Also make sure your phone is using the 3.5 as default and not 2.0. Go here: HKLM/Software/Microsoft/.NETCompactFramework. Change the DWORD data of entry 2.0.7045.00 from 1 to 0. Next Change the DWORD data of entry 3.5.7283.00 from 0 to 1 and then reset. This disables 2.0 and enables 3.5. Also some apps need the file NETCFv35.Messages.EN.wm. Here is the link to download the file: http://tinyurl.com/35yuc6r Install the NETCFv35.Messages.EN.wm.cab to device after you installed NETCFv35.wm.armv4i.cab and reset.
The above is from First page sticky, Hints and Tweaks the first post..
you will need PHM REGEDIT.
Hello USers,
I have upgraded to the new European Rom for the HD2,
There is a newer version of .net framework installed on the device which isnt compatiable with the Icon changer program for the hd2.
I attempt to install the older version it tells me to remove the newer one first but its not in the remove program list.
I hate the stock icons and what not and would like the newer ones on my device.
Thanks
I had the same problem with an ap from work, you need to unpack the .cab and remove the .net install section from the install script and then repack it.
I used google and search to figure out what i had to do and how, good luck mate