[Q]How do I fix my X8? - Android Q&A, Help & Troubleshooting

Hello,
I got a new phone that is purely for gaming, so I rooted it, got xrecovery, CWM, and installed a ROM called CM-X. I installed CM-X and it wouldn't boot. I have a recovery, which is ****ed. I don't have debugging on now for some reason. So my question is, how can I flash my phone to normal? I have everything to flash it. But no debugging = no flash. Please I need help, thank you all.
When flashing; I get this.
01/024/2012 20:24:20 - INFO - Start Flashing
01/024/2012 20:24:20 - ERROR -
01/024/2012 20:24:20 - ERROR - Error flashing. Aborted
01/024/2012 20:24:20 - INFO - Device connected in flash mode
01/025/2012 20:25:02 - INFO - Device disconnected
01/025/2012 20:25:09 - INFO - Device connected with USB debugging off

Please can somebody help me? I really need this phone by tomorrow working.

Flash back to stock ROM using SEUS. I think that's all that is left.

jakuburban said:
Flash back to stock ROM using SEUS. I think that's all that is left.
Click to expand...
Click to collapse
SEUS isn't finding it. I have xRecovery and CWM on my phone. Is there a stock ROM .zip that can be installed?

TheDreamLord said:
Please can somebody help me? I really need this phone by tomorrow working.
Click to expand...
Click to collapse
Hmmm. So your FlashTool managed to find your x8, but your SEUS cant ? Do you have PC Suite on your PC, because when you install it it install a pfone drivers too. So if you dont have install it, try to install it and try again with SEUS

Related

help please!!

Please help me, i have updated my x10 today through SE PC companion and it has 2.1 update1 now, i'm unable to root it using Z4root and i dont know what to do! i have downloaded all the files from here http://forum.xda-developers.com/showthread.php?p=10402805#post10402805 , followed all the instructions but with no luck
i dont know how to downgrade neither how to get this firmware on my x10
some plz help me from a to z if possible,
much appreciated
p.s. excuse my poor english,
Get xrecovery and flash to the eminence rom or the prerooted stock rom on the android development threads. Hope this helps as a start...
osamahindi said:
Please help me, i have updated my x10 today through SE PC companion and it has 2.1 update1 now, i'm unable to root it using Z4root and i dont know what to do! i have downloaded all the files from here http://forum.xda-developers.com/showthread.php?p=10402805#post10402805 , followed all the instructions but with no luck
i dont know how to downgrade neither how to get this firmware on my x10
some plz help me from a to z if possible,
much appreciated
p.s. excuse my poor english,
Click to expand...
Click to collapse
use THIS TOOL instead of flash one to install custom rom and then procced with the rest
thanks but it stucks at searching for xperia and nothing happens!!
osamahindi said:
thanks but it stucks at searching for xperia and nothing happens!!
Click to expand...
Click to collapse
then you`re doing something wrong.
or not (but you are definitely doing something wrong )
see if debugging mode is checked settings>applications>development
i'm definitely doing something wrong
debbuging mode is working "checked" but it just wont see it
osamahindi said:
i'm definitely doing something wrong
debbuging mode is working "checked" but it just wont see it
Click to expand...
Click to collapse
can your pc sync with phone? you could have usb port problems.
remove pccompanion and reinstall again
PC companion is working great and i can update and repair the phone through it, storage also working without any problems, the only thing is not working is the flash tool and xrecovery installer on the phone keeps force close!
when i press root it sees the phone but when i press on flash it wo'nt!! see below
07/052/2011 15:52:24 - INFO - Logging system initialized to INFO level
07/052/2011 15:52:26 - INFO - Searching Adb Device
07/052/2011 15:52:26 - INFO - Connect your Xperia whith debug option enabled
07/052/2011 15:52:26 - INFO - Device connected
07/052/2011 15:52:26 - INFO - Installing .\custom\root\z4root.apk
07/052/2011 15:52:28 - INFO - Root part 1 finished
07/052/2011 15:52:28 - INFO - Plean now run z4root on your device
07/052/2011 15:52:46 - INFO - start
07/052/2011 15:52:46 - INFO - Searching for Xperia....
i think i remember what`s your problem.
open regedit on you pc (with phone connected) and serach for
"DeviceInstance"
this will give yo usomething like this
"USB\Vid_0fce&Pid_adde\5&1a93e808&0&1"
copy the last part. in my case 5&1a93e808&0&1
open deviceID on 2.1_2.0.A.0.504_GENERIC_x10i folder that you`ve downloaded and paste your DeviceInstance.
then try again
If this is not the case note that I had same issue and I have reinstalled the usb drivers ...(attached). I have Xp but I belive they will work on other sistems (win).If you can not manage to reinstall drivers just say. Good luck
please tell me how to install the attached folder?
on what sistem?
First the folder contains a driver and I am going to explain the installation on win XP. In Device Manager in Xp find the SEMC HSUSB Device, right click and update driver. Select Install from a specific location and next, select don't search I will chose the driver to install and click next. In the next screen select Have disk and browse to the folder extracted from the archive you downloaded , after that click next and finish. It should work and find your x10 ...if not post one more
P.S: do all this with your phone connected to the comp with debugging on and with the sd not mounted
Windows XP pro SP3
i tried three times to update the driver with downloaded folder but it gives me the specified location does not contain information about your hardware after i select the downloaded folder
any other driver would help?
Ok. Try with this archive...maybe it will give you an error when unrared but it worked for me. I did not upload this archive first because of that error , this is the original one . Try
Try to right click-> install the " .inf " file in the folder first if you can not find it ....
nothing worked for me, maybe its a windows XP issues, i'm trying my other laptop which has windows 7 and hope it will work
nothing worked please help me!
osamahindi said:
nothing worked please help me!
Click to expand...
Click to collapse
use old not-GUI flasher, that worked for me

[Q] Help with flashing please.

i tried flashing my X10 mini pro using Flashtool, but got this error:
Code:
02/006/2011 03:06:30 - INFO - Searching Xperia....
02/006/2011 03:06:30 - INFO - Found at USB\VID_0FCE&PID_ADDE\5&11AE52C9&0&4
02/006/2011 03:06:30 - INFO - Start Flashing
02/006/2011 03:06:31 - INFO - VER="R8A029";DATE="20100601";TIME="12:17:00";
02/006/2011 03:06:31 - INFO - Flashing loader
02/006/2011 03:06:31 - ERROR - Error flashing. Aborted
02/006/2011 03:06:31 - INFO - Now unplug the device and power it on
02/006/2011 03:06:31 - INFO - Then go to application settings
02/006/2011 03:06:31 - INFO - turn on Unknown Sources and Debugging
And my phone gets stuck on the white Sony Ericsson screen, so cant change the app settings, nor can i access CWM..
Please help me.. thank you!
did you take off your battery and reboot? which version off flash tool do you have? there are different versions out there http://androxyde.github.com/Flashtool/ is your version similar? i guess you are on stock? i hope this helps. Post more Information if nothing works repair your phone with companion
yes i took off the battery and rebooted.. and the flashtool version is the same as the one you have linked in the above post...
and yes i'm running on stock... phone is rooted..
Are you trying to flash the bootloader without unlocking it or trying to flash an official Sony Ericsson ROM? If you trying to flash the bootloader the 'R8A029' should be 'r8A029' with a lower case 'r', you'll need to use a bootunlocker to do that. (be sure to read the instructions or else you can hard brick your phone!)
Sent from my U20i using Tapatalk
domics said:
if nothing works repair your phone with companion
Click to expand...
Click to collapse
obsidian_eclipse said:
Are you trying to flash the bootloader without unlocking it or trying to flash an official Sony Ericsson ROM? If you trying to flash the bootloader the 'R8A029' should be 'r8A029' with a lower case 'r', you'll need to use a bootunlocker to do that. (be sure to read the instructions or else you can hard brick your phone!)
Sent from my U20i using Tapatalk
Click to expand...
Click to collapse
Thank you both for your replies and giving me more knowledge on flashing androids
But PC companion did the trick for me
Mimmi is back to normal special thanks to domics for suggesting me to use pc companion..
thank you!

[Q] BootLoop, tried everything I could find.

So... Uhhh... Sorry for posting here! I saw the video "you're a noob" and got a little scared of posting here. But its almost 3 days without my phone, so I'm a bit of desperate! >>"
So, I got a X10a, and it was with 2.1 until yesterday. I've taken courage and was going to upgrade to 2.3. Pulgged the phone, downloaded the PC Companion, begin the upgrade. Everything went ok. Then I got in the bootloop. Panic at frist the I started to look for some solution. I flashed to 2.3 x10i generic using Flashtools. Still on bootloop. Flashed to 2.1 using flashing tools, still no good. Tryed to repair with PC Companion, no good. Flashed and flashed and flashed, tryed and tryed to repair and nothing. Still on bootloop, I just can't figure out what I can do! Even formating the SD I tryed, and nothing!
So, anyone can help me? I really need help here, I just can't find anything to help me!
Thank you very much! =)
Sorry for my bad english! =/
Try to flash the ROM 2 times with SEUS if it won't work by the first time. I had such a problem once. If it won't help try to flash this ROM via flashtool, and after that just normally (using SEUS) flash to stock 2.3.3.
Good luck
About SEUS... Can I use PCC repair? Like I can't find a SEUS working, it says "Failed checking application versions, please reinstall the application and make sure you have the latest version".
And THANK YOU SO MUCH for the quick answer!! I'm kinda morning my phone here!
I'm downloading the FM you just posted! =)
dd4nt388 said:
About SEUS... Can I use PCC repair? Like I can't find a SEUS working, it says "Failed checking application versions, please reinstall the application and make sure you have the latest version".
And THANK YOU SO MUCH for the quick answer!! I'm kinda morning my phone here!
I'm downloading the FM you just posted! =)
Click to expand...
Click to collapse
Yes You can use PCC
No dice! =/
Find the SEUS working, flashed twice, nothing.
Flashed the FM you linked, nothing. Flashed once with SEUS on top of it nohting, twice nothing still!
Please! Tell me that my phone its not dead! u.u
dd4nt388 said:
No dice! =/
Find the SEUS working, flashed twice, nothing.
Flashed the FM you linked, nothing. Flashed once with SEUS on top of it nohting, twice nothing still!
Please! Tell me that my phone its not dead! u.u
Click to expand...
Click to collapse
try flashing this 2.1 if it works.
http://www.mediafire.com/?sqv6274anzfzn2x
mirajp1 said:
try flashing this 2.1 if it works.
Click to expand...
Click to collapse
No dice! =/
Tried another cable but still no go...
Don't know what to do anymore... Everything I read say that flashing should resolve... But still don't work
Anyone got a 1.6 Stock so I can try it? Can't find a working link.
did you try rooting your phone with flashtool and install xrecovery?
you can try that might work
The phone does not start... I think for me to root and instal xrecovery I need it to be functional, right?
I have another suggestion. Have u tried flashing another baseband? one that you're sure matchs the rom you flash? If your baseband is wrong installed ROM will be stuck forever.
Sorry, but I don't understand much about baseband. Can't find a easy understanding guide. My phone is from Brazil the company is VIVO. Can you explaim for me? Or show a good guide of it please?
Thank you! =)
EDIT: So, I found a 1.6 and flashed (Old stuff, Cmd). Now here is the diference, after 1.6 I try to turn on my phone and nothing happens, just the green let flash for like 0.5 secs.
When I try to upgrade to 2.1 by flashtool it turn on the screen but just that, no se logo or nothing, and it flicks from time to time.
When flahsing from SEUS I got the same stuff for 2.1.
Got a baseband 52, 54a, 55a and 49i. All I could find in the internet.
Baseband 52, 54a, 55a and 49i no good in SEUS flash.
With generic 2.1 from jakuburban: Tried 54i, 58i and 49i.
No dice... For Crist sake I'm kinda desperate right now!!! >>""""""""""""""""
dd4nt388 said:
Sorry, but I don't understand much about baseband. Can't find a easy understanding guide. My phone is from Brazil the company is VIVO. Can you explaim for me? Or show a good guide of it please?
Thank you! =)
EDIT: So, I found a 1.6 and flashed (Old stuff, Cmd). Now here is the diference, after 1.6 I try to turn on my phone and nothing happens, just the green let flash for like 0.5 secs.
When I try to upgrade to 2.1 by flashtool it turn on the screen but just that, no se logo or nothing, and it flicks from time to time.
When flahsing from SEUS I got the same stuff for 2.1.
Got a baseband 52, 54a, 55a and 49i. All I could find in the internet.
Baseband 52, 54a, 55a and 49i no good in SEUS flash.
With generic 2.1 from jakuburban: Tried 54i, 58i and 49i.
No dice... For Crist sake I'm kinda desperate right now!!! >>""""""""""""""""
Click to expand...
Click to collapse
To flash the baseband's use flashtool (can be downloaded on dev's section). I don't remember what baseband goes with each system version. I can only tell that 2.1.71 only works with Android 2.3.X
PS: finally found the baseband thread, where more detailed info is available: Baseband
kalte said:
To flash the baseband's use flashtool (can be downloaded on dev's section). I don't remember what baseband goes with each system version. I can only tell that 2.1.71 only works with Android 2.3.X
PS: finally found the baseband thread, where more detailed info is available: Baseband
Click to expand...
Click to collapse
No dice! =/
Sorry for the late response, but got no time to spent with the phone.
Flahsed 3.0.1.G.0.75 with 2.1.71. No good! =/
I think I'll just run the repair and send to SE for repair, and be without my phone for 4 months! >>"
dd4nt388 said:
No dice! =/
Sorry for the late response, but got no time to spent with the phone.
Flahsed 3.0.1.G.0.75 with 2.1.71. No good! =/
I think I'll just run the repair and send to SE for repair, and be without my phone for 4 months! >>"
Click to expand...
Click to collapse
Which version of build .75 did u grab? Did u use global generic?
Sent from my X10i using XDA
laneyofdeath said:
Which version of build .75 did u grab? Did u use global generic?
Sent from my X10i using XDA
Click to expand...
Click to collapse
This is the file name. X10i_3.0.1.G.0.75_1241-1846.
When I downloaded said to be global generic. I got a X10a_3.0.1.G.0.75_AMERICA-US GENERIC 1233-8200 here... Should I try with the 2.1.71?
black screen, unable to boot
I tried to install xrecovery, but my device got stuck and now there is black screen..... when I try to flash it, following is what appears on the flashtool
Please help
30/005/2012 08:05:30 - INFO - <- This level is successfully initialized
30/005/2012 08:05:30 - INFO - Flashtool Version 0.6.8.0 built on 2012-02-26 19:26:25
30/005/2012 08:05:30 - INFO - You can drag and drop ftf files here to start flashing them
30/005/2012 08:05:35 - INFO - Device disconnected
30/005/2012 08:05:48 - INFO - Device connected in flash mode
30/006/2012 08:06:08 - INFO - Selected X10_V1_BLRelock.ftf
30/006/2012 08:06:08 - INFO - Preparing files for flashing
30/006/2012 08:06:08 - INFO - Please connect your device into flashmode.
30/006/2012 08:06:08 - INFO - Opening device for R/W
30/006/2012 08:06:08 - INFO - Reading device information
30/006/2012 08:06:08 - INFO - Start Flashing
30/006/2012 08:06:08 - ERROR -
30/006/2012 08:06:08 - ERROR - Error flashing. Aborted
30/006/2012 08:06:09 - INFO - Device connected in flash mode
My device was on gingerbread 2.3.3, stuck from 3 days....
Can anybody tell me what to do in order to recover.... any help will be greatly appreciated
devendra.sobhani said:
I tried to install xrecovery, but my device got stuck and now there is black screen..... when I try to flash it, following is what appears on the flashtool
Please help
30/005/2012 08:05:30 - INFO - <- This level is successfully initialized
30/005/2012 08:05:30 - INFO - Flashtool Version 0.6.8.0 built on 2012-02-26 19:26:25
30/005/2012 08:05:30 - INFO - You can drag and drop ftf files here to start flashing them
30/005/2012 08:05:35 - INFO - Device disconnected
30/005/2012 08:05:48 - INFO - Device connected in flash mode
30/006/2012 08:06:08 - INFO - Selected X10_V1_BLRelock.ftf
30/006/2012 08:06:08 - INFO - Preparing files for flashing
30/006/2012 08:06:08 - INFO - Please connect your device into flashmode.
30/006/2012 08:06:08 - INFO - Opening device for R/W
30/006/2012 08:06:08 - INFO - Reading device information
30/006/2012 08:06:08 - INFO - Start Flashing
30/006/2012 08:06:08 - ERROR -
30/006/2012 08:06:08 - ERROR - Error flashing. Aborted
30/006/2012 08:06:09 - INFO - Device connected in flash mode
My device was on gingerbread 2.3.3, stuck from 3 days....
Can anybody tell me what to do in order to recover.... any help will be greatly appreciated
Click to expand...
Click to collapse
Did you try using different computer????
once i got stuck with same at the time of unlocking bootloader and i resolve it by using different computer
Click to expand...
Click to collapse
try it it might help........
So, I was calling some guys who make box flash in my city. Some said that might be necessary to flash or something by solder(???) I wanna know if it compensate to make box flash, and if really exist this solder procedure.
Thanks! =)
phone restarting again and again
I used sony ericsson update service and it worked.... got gingerbread 2.3.3 again but the phone is restarting again and again.....
I think its the issue with battery...
Please let me know if there's something else i need to do....
thanks in advance
dd4nt388 said:
This is the file name. X10i_3.0.1.G.0.75_1241-1846.
When I downloaded said to be global generic. I got a X10a_3.0.1.G.0.75_AMERICA-US GENERIC 1233-8200 here... Should I try with the 2.1.71?
Click to expand...
Click to collapse
Are u using a X10a or a X10i ?
I think it's X10a for your country (not sure but...)
So the baseband might be 2.1.65 or 2.1.54... 2.1.71 is for X10i according the baseband thread...
HERE is a thread with most of firmware

[Q] Usb debugging problem (Xperia P)

Every time I have been trying to root my phone using the Flashtool, it has been giving me this message which is preventing me from rooting (i guess)
:05/005/2013 03:05:21 - INFO - Device connected with USB debugging off
Can anyone help me with this?
Edit: My USB debugging is actually activated on my phone.
Redcalibur said:
Every time I have been trying to root my phone using the Flashtool, it has been giving me this message which is preventing me from rooting (i guess)
:05/005/2013 03:05:21 - INFO - Device connected with USB debugging off
Can anyone help me with this?
Edit: My USB debugging is actually activated on my phone.
Click to expand...
Click to collapse
Can You please give more details about the Firmware you are using. Also check if you see a small Android logo on top of Status-bar while your phone is connected via USB and Debugging is on..
Also try to re-install ADB Drivers..
aamirrasool said:
Can You please give more details about the Firmware you are using. Also check if you see a small Android logo on top of Status-bar while your phone is connected via USB and Debugging is on..
Also try to re-install ADB Drivers..
Click to expand...
Click to collapse
I am using .54 & yes, I do see an Android logo on top of the Statusbar, I'll try re-installing the ADB Drivers later, do not have time now.
Edit: Re-installing the ADB Drivers did not work.
Edit 2: I got this after disconnecting the device:
05/046/2013 13:46:12 - INFO - Device disconnected
05/046/2013 13:46:12 - INFO - Device connected with USB debugging on
05/046/2013 13:46:13 - INFO - Connected device : LT22
05/046/2013 13:46:13 - INFO - Installed version of busybox : BusyBox v1.16.2androidfull (2011-06-09 17:40:07 CST) multi-call binary.
05/046/2013 13:46:13 - INFO - Android version : 2.3.4 / kernel version : 2.6.38-android-x86+ / Build number : GRJ22
The phone version is ics, I do not know why it says that it is 2.3.4, kernel is 3.0.8+ & build = 6.1.1.B.1.54, anyone mind explaining this?
As much as I know you can't root xperia p. 54 via flashtool without flashing kernel .... There is a separate thread in development section regarding.root... Check that brother...
Without i meant the root option avialable in advanced menu..
Sent from my LT22i using xda app-developers app
aamirrasool said:
As much as I know you can't root xperia p. 54 via flashtool.. There is a separate thread in development section regarding.root... Check that brother...
Sent from my LT22i using xda app-developers app
Click to expand...
Click to collapse
Mind linking that? The only threads about rooting I am finding is using the flashtool. :s
http://forum.xda-developers.com/showthread.php?t=2100529
You can root via Flashtool only by flashing an Old kernel then using Rootkit (in the link above) after its done. flash back new kernel..
I.e putting Your phone into flash mode then flash the kernels
aamirrasool said:
http://forum.xda-developers.com/showthread.php?t=2100529
You can root via Flashtool only by flashing an Old kernel then using Rootkit (in the link above) after its done. flash back new kernel..
I.e putting Your phone into flash mode then flash the kernels
Click to expand...
Click to collapse
I've tried doing that over the last 2 days too, flashing to .559 works but makes my phone slow as fk but it is usable.
The main problem I am having is with the Rootkit, I am getting adb errors etc, I will take a screenshot once I've done another attempt. Feel free to answer this if you do know how to fix it or just have something in mind, I'll be back in 2 hours.
Redcalibur said:
I've tried doing that over the last 2 days too, flashing to .559 works but makes my phone slow as fk but it is usable.
The main problem I am having is with the Rootkit, I am getting adb errors etc, I will take a screenshot once I've done another attempt. Feel free to answer this if you do know how to fix it or just have something in mind, I'll be back in 2 hours.
Click to expand...
Click to collapse
try this...
install a fresh copy of .54
Dont start the phone then after finishing installation, install .599 kernel. boot now
there wont b any lag now, now try again with "rooting with Restore" after it finishes install the .54 kernel again..
if again it doesnt work There is probably Bad Drivers installation..
aamirrasool said:
try this...
install a fresh copy of .54
Dont start the phone then after finishing installation, install .599 kernel. boot now
there wont b any lag now, now try again with "rooting with Restore" after it finishes install the .54 kernel again..
if again it doesnt work There is probably Bad Drivers installation..
Click to expand...
Click to collapse
I did everything you said and found out the real issue, I had 2 adb's connected, well, one virtual (bluestacks) and since it was listed first on the adb devices, I had to uninstall it. It is true that there isn't lag after installing a fresh copy of the .54 & then flashing to .599. Thank you for helping.

My apps keep closing and i cannot use flashtool

Hello,
I have a Sony Xperia U and I try to install a new firmware but I can't.
When I use flashtool, i have this message :
Current device : ST25i - YT900389W7 - 1261-7887_R2E - 1254-3522_6.0.B.3.184 - WORLD_6.0.B.3.184
- INFO - Start Flashing
- INFO - Processing loader.sin
- INFO - Checking header
- INFO - Flashing data
- INFO - Processing of loader.sin finished.
- INFO - Loader : S1_Root_3065 - Version : R5E003 / Boot version : R10E013 / Bootloader status : NOT_ROOTABLE
- INFO - Ending flash session
- ERROR - ERR_SEVERITY="MAJOR";ERR_CODE="0026";ERR_DYNAMIC="08 : TA flush failed";
I tried to re install the drivers, to change the cable, to change the firmware, to use an other version of flashtool but it didn't work. I had already installed 3 firmwares before without any problem.
My phone is out of use, the apps keep closing, i cannot delete or save things on my phone because when I switch it on, it comes back to the previous setting.
My bootloader is locked and i can't unock it because of my rooting status is "NOT allowed" (operator...).
These past 3 weeks i couldn't use my phone, please help me!
Thank you
Try Update or repair with PC Companion
ChikeD said:
Try Update or repair with PC Companion
Click to expand...
Click to collapse
Hi, thanks for your answer.
I already tried with PC Companion and SEUS, it tells me to try again and again. I can't even get my backups, and I can't update the software.
watachi said:
Hi, thanks for your answer.
I already tried with PC Companion and SEUS, it tells me to try again and again. I can't even get my backups, and I can't update the software.
Click to expand...
Click to collapse
In what stage exactly does PCC tell you to try again, does it begin the flash process and fails(after you connect with volume up) or before?
ChikeD said:
In what stage exactly does PCC tell you to try again, does it begin the flash process and fails(after you connect with volume up) or before?
Click to expand...
Click to collapse
When I use PCC, it downloads the update, then it tells me to disconnect my phone, to switch it off (and wait 5 s), then connect it with the button - (volume down) pressed.
After few seconds "an error had occured" and it proposes me to try again. It is the error number 100. So I think the flash process fails after the connection.
When I use flashtool, it's the same : after connecting the phone with the volume down button pressed, the error "flush failed" above appears.
I noticed that i cannot delete nor add any file in my phone, maybe the problem comes from the storage? Even when I restore the factory defaults, nothing happens, i still have the apps.
Thanks for helping me
watachi said:
noticed that i cannot delete nor add any file in my phone, maybe the problem comes from the storage? Even when I restore the factory defaults, nothing happens, i still have the apps.
Thanks for helping me
Click to expand...
Click to collapse
Yes it does look like storage problam
ChikeD said:
Yes it does look like storage problam
Click to expand...
Click to collapse
So how can I fix it? Is there any software?
watachi said:
So how can I fix it? Is there any software?
Click to expand...
Click to collapse
I don't think so.
What about sending it to service?
ChikeD said:
I don't think so.
What about sending it to service?
Click to expand...
Click to collapse
I'll try but I don't think that it si still under warranty and I ve installed a custom firmware so my operator will never take a look at it...
watachi said:
I'll try but I don't think that it si still under warranty and I ve installed a custom firmware so my operator will never take a look at it...
Click to expand...
Click to collapse
Hi, there is no way to fix it with a software. I give it to my operator and they changed the mother card in the phone. So be really careful when you use falshtool...

Categories

Resources