For those of you who've been waiting for the Seidio Active / Active Combo cases are now out. http://www.seidioonline.com/category-s/7709.htm
I'm waiting for the Active Combo with Kickstand. Should come out here soon enough.
This happened a few days ago.
@Taptalk-GalaxyNote
Are there any pictures of the holster? I need something that the Note actually goes into and not just snapped in place.
reubenray said:
Are there any pictures of the holster? I need something that the Note actually goes into and not just snapped in place.
Click to expand...
Click to collapse
check out pics of the holster for the other phones..they are all the same design..nice felt the screen lays against and the bottom part of the phone on both corners will slide into it and the top clips...you'll see in the pics..
the holster/case combo is really nice..
I have the Active and holster for my Inspire 4G. It's a really good case and holster. The Note one looks exactly the same so buy with confidence.
Ordered the combo case for my note (international) last night.
They really need to come out with the Surface cases.
Sent from my SAMSUNG-SGH-I717
nice! I am looking for a good one for couple days now. can't get my beautiful note scratched up
p51d007 said:
Ordered the combo case for my note (international) last night.
Click to expand...
Click to collapse
what exactly is the combo? that includes the holster?
because holster doesnt seem available for ATnT version
but i thought all the cases could fit either version?
Eddie Bombay said:
They really need to come out with the Surface cases.
Sent from my SAMSUNG-SGH-I717
Click to expand...
Click to collapse
+1 on surface combo!
Sent from my SAMSUNG-SGH-I717 using XDA
Only thing I could think of would be the placement for the microphones, cap buttons or speaker?
SayWhat10 said:
what exactly is the combo? that includes the holster?
because holster doesnt seem available for ATnT version
but i thought all the cases could fit either version?
Click to expand...
Click to collapse
p51d007 said:
Only thing I could think of would be the placement for the microphones, cap buttons or speaker?
Click to expand...
Click to collapse
P51,
Let us know how you like your active case when you receive it. I use a TPU case for both of my GNotes and I can confirm all the cutouts are the same; mics, etc.
I am bummed they do not have the surface combo out...
SayWhat10 said:
what exactly is the combo? that includes the holster?
Click to expand...
Click to collapse
combo is the case and holster..
Comes with fries and a drink.
Sent from my SAMSUNG-SGH-I717
mrdsl said:
combo is the case and holster..
Click to expand...
Click to collapse
+1
eddie bombay said:
comes with fries and a drink.
Sent from my samsung-sgh-i717
Click to expand...
Click to collapse
+2
Hurry up combo with kickstand
Sent from my SAMSUNG-SGH-I717 using XDA
maydre said:
Hurry up combo with kickstand
Sent from my SAMSUNG-SGH-I717 using XDA
Click to expand...
Click to collapse
I agree, I want the white one to go with my white note. I think it is the only case and clip combo I have seen that's going to be available in white.
Sent from my Galaxy Note
Eazie757 said:
I agree, I want the white one to go with my white note. I think it is the only case and clip combo I have seen that's going to be available in white.
Sent from my Galaxy Note
Click to expand...
Click to collapse
http://www.ebay.com/itm/220970767172?ssPageName=STRK:MEWAX:IT&_trksid=p3984.m1438.l2649
I found that on eBay, and it's from a US based company too.
The combo case arrived Wednesday. FITS PERFECT! I think it is a little less bulk than the Speck case I was using (from at&t). Holes for the microphones, camera, speaker, LED are lined up perfectly. Nice snug fit in the belt clip case too.
The bottom sits into the holster, and on the other end is a spring loaded clip that snaps over the top of the phone, securely holding it in place.
planoman said:
P51,
Let us know how you like your active case when you receive it. I use a TPU case for both of my GNotes and I can confirm all the cutouts are the same; mics, etc.
I am bummed they do not have the surface combo out...
Click to expand...
Click to collapse
p51d007 said:
The combo case arrived Wednesday. FITS PERFECT! I think it is a little less bulk than the Speck case I was using (from at&t). Holes for the microphones, camera, speaker, LED are lined up perfectly. Nice snug fit in the belt clip case too.
The bottom sits into the holster, and on the other end is a spring loaded clip that snaps over the top of the phone, securely holding it in place.
Click to expand...
Click to collapse
Thank p51!
I love the combo. Is the phone pocketable with the active case if I want to go without the holster. How big is it on the belt. Pics would be super! Thank p51!
Sent from my SAMSUNG-SGH-I717 using XDA
Related
Order one in red and it came today....i must say i am very impressed with this...i had an otterbox on my evo4g and didn't like it...the kick stand wasn't as sturdy and after a while the rubber got loose(thats what she said lol)and the power button had to be fiddled with on the case to make it hit the actual button on the phone...this case by trident seems better with the reversed design(soft sleeve under the hard outer shell). and it looks great on the phone!!!!!
www.tridentcases.com
I just replaced my Otterbox Defender with a Trident Cyclops. Huge improvement. I can finally touch the sides of my screen.
firemedic1343 said:
I just replaced my Otterbox Defender with a Trident Cyclops. Huge improvement. I can finally touch the sides of my screen.
Click to expand...
Click to collapse
how is the size comparison of the cyclops to the defender?
Dose the kraken come with holdster
Sent from my PG86100 using XDA Premium App
Yes it comes with a holster that holds the phone with the screen facing inward. Pretty sturdy I shook it very hard and it would not let the phone go
Sent from my PG86100 using XDA App
I have one on the way now won it on ebay for under $27 with free expedited shipping. i really like the design so we will see how it is when i get it.
jtgarza3 said:
how is the size comparison of the cyclops to the defender?
Click to expand...
Click to collapse
The size is similar, but I believe the Cyclops is slightly larger.
Trident advantages are mainly the ability to be able to touch the screen edge and no more lint on your case. But the lack of soft rubber on the outside does make it quite a bit less grippy.
Overall I think the Cyclops leaves the Defender defenseless.
This case is the best case I have seen out for our phones to date. I absolutely love it. Kickstand is rock solid and the case just feels nice in your hand. Most important it can slide in and out of your pocket easily!
Pros-
Camera button works well
Kickstank is the best I have seen
Screen and camera protectors ( I don't use them but they look well done for someone who uses them )
Hard outside case slides in pocket well
Cons-
Sometime hard to open charge port cover
I will post pictures of it next to my defender and commuter otter box cases for comparison ... The kraken is maybe a slight bit thicker than the defender but unnoticeable really
Sent from my PG86100 using Tapatalk
Here are those pictures.
Sent from my PG86100 using Tapatalk
Is the KRAKEN AMS the same as the KRAKEN 2? I don't see a kickstand in their pictures for the AMS case... :-( I wanna order the one you got!
EDIT: Nvm, I must've clicked on a different one...
You will like it it's sweet
Sent from my PG86100 using Tapatalk
Does the Kraken II have a dust filter over the speaker ports (both the earpiece and the speakerphone)? I'm currently using the Otterbox Defender, and I'm getting tired of having to open it up to clean dust from between the screen and the case.
Also, can the holster be used to hold the phone with the screen facing out? I've set my Otterbox holster in the car to hold the phone that way for convenience.
NekoHunter said:
Does the Kraken II have a dust filter over the speaker ports (both the earpiece and the speakerphone)? I'm currently using the Otterbox Defender, and I'm getting tired of having to open it up to clean dust from between the screen and the case.
Also, can the holster be used to hold the phone with the screen facing out? I've set my Otterbox holster in the car to hold the phone that way for convenience.
Click to expand...
Click to collapse
The best part of using otterbox is there warranty is the best yet. They will replace your case and holster and let you keep your old one. Trident warranty is slow and a pain.
The holster on the kraken is pretty small. From the pic. I just got one on ebay for 25 bucks.
reaper24 said:
I just got one on ebay for 25 bucks.
Click to expand...
Click to collapse
+1, just got mine yesterday
Sent from my White 3D
kazp3r17 said:
+1, just got mine yesterday
Sent from my White 3D
Click to expand...
Click to collapse
How is the holster part from the pic I seen of it looks tiny? Does it hold the phone in place pretty well? Im hoping since the holster is so tiny I don't catch it on something and have the phone pop out.
My phone popped out once....but I'm a rough guy...mechanic by trade so me scooting on the floor under a car and having my phone come out of the clip isn't so uncommon no matter what case it is. My mom ordered a kraken for her 3vo and the clip broke...from its first use...have yet to hear back from trident about hers
Sent from my MIUI 3vo
reaper24 said:
How is the holster part from the pic I seen of it looks tiny? Does it hold the phone in place pretty well? Im hoping since the holster is so tiny I don't catch it on something and have the phone pop out.
Click to expand...
Click to collapse
Yea it is sort of small but I rarely use holsters, but I did test the hold by holding the clip and doing a. Fast throwing motion with case installed on phone and it stayed latched on
Sent from my PG86100 using xda premium
kazp3r17 said:
Yea it is sort of small but I rarely use holsters, but I did test the hold by holding the clip and doing a. Fast throwing motion with case installed on phone and it stayed latched on
Sent from my PG86100 using xda premium
Click to expand...
Click to collapse
Thanks for the pics man still waiting on mine should be here in the morning along with my evo 3d lol.
Case looks good looks better then the defender case. Wish holster was bigger but looks like it will hold up nice. Again thanks for the pics of the holster not many folks post pics of it when they do a review.
reaper24 said:
Thanks for the pics man still waiting on mine should be here in the morning along with my evo 3d lol.
Case looks good looks better then the defender case. Wish holster was bigger but looks like it will hold up nice. Again thanks for the pics of the holster not many folks post pics of it when they do a review.
Click to expand...
Click to collapse
Np, lol I looked about everywhere to see how this case was then just decided to get it I had the defender but didn't like it so I decided to try this and it works perfectly when I'm going to actually use it
Sent from my White 3D
What horizontal belt case will work with the following?
http://www.amazon.com/gp/product/B000H13M2K/ref=ox_sc_act_title_1?ie=UTF8&m=A30XRGG45X0IFD
Yeah I don't know. I'm not sure there is anything that is big enough out there to hold this phone with abgell case on.
I will say that I really like the gel case and I really would love also to find something that works.
Sent from my SAMSUNG-SGH-I717 using xda premium
Anyone getting belt cases??? I work in Construction and need to put it someplace besides my pocket.
reubenray said:
Anyone getting belt cases??? I work in Construction and need to put it someplace besides my pocket.
Click to expand...
Click to collapse
Personally I am waiting for the Seidio belt holster/belt/case combo to come out..Should be soon I hope..
http://www.seidioonline.com/category-s/7709.htm
Maybe this case depending on the thickness the case adds.
LEATHER CASE COVER VERTICAL POUCH FOR Samsung Galaxy Note i9220
my make
http://forum.xda-developers.com/showpost.php?p=22732528&postcount=11
I ordered one of these. I will let you know how it works. Not bad fro $10
http://youtu.be/t64Sn4h7UfE
pony13ca said:
I ordered one of these. I will let you know how it works. Not bad fro $10
http://youtu.be/t64Sn4h7UfE
Click to expand...
Click to collapse
Looks good and great price.
I have the Boxwave Unicolor case and it fits in the Pdair vertical leather belt holster wonderfully. I'd wager the horizontal pdair one has similiar extra room. Not sure though.
Sent from my SAMSUNG-SGH-I717 using xda premium
reubenray said:
Anyone getting belt cases??? I work in Construction and need to put it someplace besides my pocket.
Click to expand...
Click to collapse
I work in Aboriculture and nearly destroyed my iPhone 4 due to saw dust & dirt. there's no way in hell Im taking my note to work.
I got one of those dirt cheap pre-pay phones and I forward my calls to it. when I get home, I toss it aside and unforward my calls.
Err0xx said:
I have the Boxwave Unicolor case and it fits in the Pdair vertical leather belt holster wonderfully. I'd wager the horizontal pdair one has similiar extra room. Not sure though.
Sent from my SAMSUNG-SGH-I717 using xda premium
Click to expand...
Click to collapse
Got any pics of the that Pdair? I'm really interested in the vertical belt holster type case...just not sure how bulky it is once clipped on to a belt.
randaddy said:
Got any pics of the that Pdair? I'm really interested in the vertical belt holster type case...just not sure how bulky it is once clipped on to a belt.
Click to expand...
Click to collapse
One pic is of the holster by itself, the other is clipped on my pants. Not bulky at all and the clip holds on like a champ; no chance of it coming off.
Sent from my SAMSUNG-SGH-I717 using xda premium
Here is a shot of the vertical case with the Note in it. The note is also in the Boxwave Unicolor case.
Sent from my Xoom using xda premium
Err0xx said:
Here is a shot of the vertical case with the Note in it. The note is also in the Boxwave Unicolor case.
Sent from my Xoom using xda premium
Click to expand...
Click to collapse
looks like a tight fit
wonder if it'll do with they hybrid case,which is thicker i believe
Err0xx said:
One pic is of the holster by itself, the other is clipped on my pants. Not bulky at all and the clip holds on like a champ; no chance of it coming off.
Click to expand...
Click to collapse
I prefer belt clips that have a J type of design so that if anything hits the case from underneath, the case cannot slip off the belt. The bottom of the clip catches the belt on the way up. Most tight metal belt clips will slide up if for example, you sit in a tight movie seat and the seat arm pushes up on the bottom of the case and knocks the case off your belt.
Does the PDAir clip on this case have a way of stopping this scenario?
Hmm... I have always liked belt clips/cases but I think the Note is too big to be dangling from my waist. I'd like to order one just to try it out though.
I bought a Nite Ize xlarge belt case with a clip off amazon. It should be here today. The note should fit and may be a snug fit. I has on of these for my Inspire and liked it.
Still waiting for the Nutshell/Tough-as-Nuts case to be released but I'm definitely getting one. They'll even make it oversized for a small upcharge if you want it to fit an add-on shell.
http://forum.xda-developers.com/showthread.php?t=1497252
Ragin Cajun said:
I bought a Nite Ize xlarge belt case with a clip off amazon. It should be here today. The note should fit and may be a snug fit. I has on of these for my Inspire and liked it.
Click to expand...
Click to collapse
Which one did you get? I was looking at these yesterday on Amazon.
This is the one I bought. One of the reviewers says the note does fit but it's snug.
http://www.amazon.com/gp/aw/d/B006H...ile?redirect=true&ref_=oh_o01_s00_i00_details
I just bought the Mobo Carrera slim Horizontal case (for the Galaxy Nexus) and I have to say that I'm very happy with it. It fits the LTEvo nice and snug. The phone doesn't budge at all, especially when shaken vigorously. Also magnet doesn't come off when turned upside and shaken hard. The case is nice and slim to complement the slimness of the LTEvo. The interior is outlined in red leather (sort of complements the phone as well). The belt clip is made of metal (but covered in leather) and swivels but the swivel is rigid and doesn't move with little force with is good to me; stays in the position it is set to. Has the opening at the bottom to allow you to push the phone up to easily remove it.
If you are interested in a horizontal case, then this might be the one for you. Just google Mobo Carrera Horizontal case Galaxy Nexus; amazon has it here Mobo Carrera Horizontal Carrying Case. Other site sell it as well.
I bought 2 more slim cases and I'll write about them here as well when they come in this coming week.
I am looking into a belt case.... Waiting for your review
DarkManX4lf said:
I am looking into a belt case.... Waiting for your review
Click to expand...
Click to collapse
Well I didn't keep the other two cases. One was too big for the LTEvo that the phone flopped around in the case. That was a killer for me, so I didn't even bother to give it another thought.
The other one is the one pictured below. It was a case for the Galaxy Nexus so it didn't really fit all that well. Don't get me wrong the case was well designed but the dimensions were just short of fitting the LTEvo. The LTEvo was hanging out of the case. If they make one specifically for the LTEvo, it would be worth investing in it.
unknown_owner said:
Well I didn't keep the other two cases. One was too big for the LTEvo that the phone flopped around in the case. That was a killer for me, so I didn't even bother to give it another thought.
The other one is the one pictured below. It was a case for the Galaxy Nexus so it didn't really fit all that well. Don't get me wrong the case was well designed but the dimensions were just short of fitting the LTEvo. The LTEvo was hanging out of the case. If they make one specifically for the LTEvo, it would be worth investing in it.
Click to expand...
Click to collapse
If you don't mind my asking, what cases were the ones that were too big? Also do you think they'd fit the Evo with a silicone or TPU case on? Thanks!
Ditto to the above I like a gorm fitting holster but I never go out without a case. For work I use the Otterbox commuter with the seido active holster but for regular use, I use a thin TPU case. I have yet to find a holster that is thin and long enough to fit the phone with a TPU case.
Any suggestions?
Sent from my EVO using Tapatalk 2
wonton2049 said:
Ditto to the above I like a gorm fitting holster but I never go out without a case. For work I use the Otterbox commuter with the seido active holster but for regular use, I use a thin TPU case. I have yet to find a holster that is thin and long enough to fit the phone with a TPU case.
Any suggestions?
Sent from my EVO using Tapatalk 2
Click to expand...
Click to collapse
I'm still on the hunt too.
I picked one up from Walmart, its been holding up well and fits great with my tpu
crucial929 said:
I picked one up from Walmart, its been holding up well and fits great with my tpu
Click to expand...
Click to collapse
Do you know the brand? I went to Walmart and they had nothing that fit.
DarkManX4lf said:
Do you know the brand? I went to Walmart and they had nothing that fit.
Click to expand...
Click to collapse
It's made by case logic
wonton2049 said:
Ditto to the above I like a gorm fitting holster but I never go out without a case. For work I use the Otterbox commuter with the seido active holster but for regular use, I use a thin TPU case. I have yet to find a holster that is thin and long enough to fit the phone with a TPU case.
Any suggestions?
Sent from my EVO using Tapatalk 2
Click to expand...
Click to collapse
DarkManX4lf said:
I'm still on the hunt too.
Click to expand...
Click to collapse
The seidio surface holster fits the tpu covered evo like a glove. This is what i use.
Sent from my EVO using xda app-developers app
I bought my dad a side clip holster from siedioonline and he was ecstatic with it.
Even I loved it, and I really dislike holsters in general.
I've noticed something that is bothering me about my S4. Absolutely no cases fit my device properly. It seems all the cases I have, the left side of the case doesn't fit properly. When I snap a case on, the left side of the case sits noticeably farther away from the screen than the right. My diztronic case, the left side practically falls off the phone. Is my phone warped? Has anyone else noticed this? This is common across all cases for me.
Sent from my SCH-I545 using xda premium
I just received a Spigen Slim Armor. It fits it very well.
chrisjm00 said:
My diztronic case, the left side practically falls off the phone. Is my phone warped? Has anyone else noticed this? This is common across all cases for me.
Sent from my SCH-I545 using xda premium
Click to expand...
Click to collapse
I think you may have a defective unit that was missed during quality control. I have used and reviewed the diztronic case and had no problems with fitting whatsoever. I have also had no other problems with slim snap on cases as well.
I suggest bringing it into Verizon and seeing if they can swap it out for you... if they deny that there is a problem with the phone, bring in your case and plop it onto another one if you can to show them the fitting difference.
chrisjm00 said:
I've noticed something that is bothering me about my S4. Absolutely no cases fit my device properly. It seems all the cases I have, the left side of the case doesn't fit properly. When I snap a case on, the left side of the case sits noticeably farther away from the screen than the right. My diztronic case, the left side practically falls off the phone. Is my phone warped? Has anyone else noticed this? This is common across all cases for me.
Sent from my SCH-I545 using xda premium
Click to expand...
Click to collapse
Yea I've had three different cases. First was a designer case that fit fairly snugly, the second was the commuter otterbox which was nearly perfect except the rubber rim guard didn't fully cover the glastr screen protector from Spigen. So I purchased the infinity white slim Armor from Spigen and this case currently fits absolutely perfect. I would definitely suggest taking the phone in for a swap. Think of it as an excuse to drop back down to MDK if you're one of us who accidentally took ME7....
Sent from the future...
UAG cases fit perfectly.
Sent from my SCH-I545 using xda premium
+1 Slim Armor
Incipio makes a great case. Fits well with both a hard and soft shell.
Yeah I had one like that one side of the front of the phone was longer then the other. My ocd would go crazy lucky there were other issues and I got it replaced the new phone is much better.
Sent from my VZW Galaxy S4 using Tapatalk 4 Beta
Great Case that fits perfectly
Just Received the Otterbox Commuter Case . Beautiful case with a perfect fit.
Definitely a keeper.
Good Luck on your search for the perfect case.
asharad said:
I just received a Spigen Slim Armor. It fits it very well.
Click to expand...
Click to collapse
I have the Spigen Slim Armor in black and love it. Great S-View window, full protection on all sides. Well worth the money.
Hey guys bought this case from ebay and its a pretty cool all aluminum one that uses 2 screws at the bottom... only problem is when i put it on and screw it down i lose my 4g signal and it goes to 3g.... Any ideas why this would happen... thanks
Sent from my SCH-I545 using xda premium
OP
I use a Seidio Active case, fits perfectly.
TNS201 said:
OP
I use a Seidio Active case, fits perfectly.
Click to expand...
Click to collapse
I'm leaning towards a defect. The same fitment issue is across all cases. How do I take my concern to VZW without them thinking I'm just being picky?
Sent from my SCH-I545 using xda premium
scottgalit61 said:
Hey guys bought this case from ebay and its a pretty cool all aluminum one that uses 2 screws at the bottom... only problem is when i put it on and screw it down i lose my 4g signal and it goes to 3g.... Any ideas why this would happen... thanks
Sent from my SCH-I545 using xda premium
Click to expand...
Click to collapse
That would be due to the metal construction of the case. It's not insulated to keep from interfering with the radio's.
RaptorMD said:
That would be due to the metal construction of the case. It's not insulated to keep from interfering with the radio's.
Click to expand...
Click to collapse
Is there a way to insulate it...???
Sent from my SCH-I545 using xda premium
Not really, it needs to be part of the case design. Whoever came up with this case should take it back its not acceptable to sell something that is all about bling and no signal.
RaptorMD said:
I have the Spigen Slim Armor in black and love it. Great S-View window, full protection on all sides. Well worth the money.
Click to expand...
Click to collapse
I've considered the slim Armor view from Spigen. Can I buy that part separately? I already have the slim Armor in infinity white.
Sent from the future...
Anthony825 said:
I've considered the slim Armor view from Spigen. Can I buy that part separately? I already have the slim Armor in infinity white.
Sent from the future...
Click to expand...
Click to collapse
I don't think so. You can however buy replacement backplates to convert the slim armor view into a slim armor but I don't think there is an alternative option. I would send them a message and ask if they do plan to offer it at some point.
Just upgraded from the Note 2 and disappointed to find out Momax did not make the same case that I been using for the 3.
Overall, any opinions on a case that has a kickstand and does portrait and landscape well?
Sent from my SPH-L900 using Tapatalk
I wish somebody knew. The VZW hard case has 2 way kickstand but fits so tight I broke my volume key taking it off. It also offers no protection on top or bottom only back and sides.
Amzer makes one but I can't find a single picture showing it in both portrait and landscape view.
Please help us find a good case!
I have 2 in mind, one is super slim and the other is super bulky lol
Reiko Polymer case
And aduro shell holster combo
Both on Amazon
1slow4G said:
I have 2 in mind, one is super slim and the other is super bulky lol
Reiko Polymer case
And aduro shell holster combo
Both on Amazon
Click to expand...
Click to collapse
The Aduro shell is the same one that broke my phone. Looks like VZW model. Nobody will confirm if reiko works in both orientations
Sent from my DROID RAZR HD using Tapatalk 2
recDNA said:
The Aduro shell is the same one that broke my phone. Looks like VZW model. Nobody will confirm if reiko works in both orientations
Sent from my DROID RAZR HD using Tapatalk 2
Click to expand...
Click to collapse
I can comfirm the Reiko works both ways. I had it in the past
1slow4G said:
I can comfirm the Reiko works both ways. I had it in the past
Click to expand...
Click to collapse
I just purchased one. Hoping for the best! Thanks. The Amzer and Aduro are both the same as evil vzw case so i guess no other choices exist
Sent from my DROID RAZR HD using Tapatalk 2
That Reiko case offers great protection aswell.
I am concerned it will interfere with easy use of buttons but we'll see....
recDNA said:
I am concerned it will interfere with easy use of buttons but we'll see....
Click to expand...
Click to collapse
You mean like hard to press? If so not at all. It's 2 part case. Rubber inner and polycarbonate skeleton
I use the Trident Kraken AMS, and it has a solid metal kickstand that is also reversible. Also provides superior protection for my phone. I dropped it down 30 flights of stairs at the mall escalator, and not a scratch. It's pure quality.
Probably makes it too thick but I will check it out. Thanks.
xdaDemiGod said:
I use the Trident Kraken AMS, and it has a solid metal kickstand that is also reversible. Also provides superior protection for my phone. I dropped it down 30 flights of stairs at the mall escalator, and not a scratch. It's pure quality.
Click to expand...
Click to collapse
Did you mean 30 stairs? 30 flights of stairs = 30 floors!
OK, I bought the Reiko Polymer Hybrid Kickstand Case. It is excellent, in fact I ordered a second one. Now...can anyone suggest a horizontal belt clip pouch that it will fit in? I have one Reiko pouch that isn't quite long enough and another that is so deep it is hard to get the phone out even though it is a perfect fit.
The phone in case is 6.3 x 3.25 x .6 inches. Anybody know a belt clip horizontal pouch it will fit in?
If you can DIY then check my signature.
I'd rather buy one
---------- Post added at 02:55 PM ---------- Previous post was at 02:44 PM ----------
CZ Eddie said:
If you can DIY then check my signature.
Click to expand...
Click to collapse
I don't see your signature?
recDNA said:
I don't see your signature?
Click to expand...
Click to collapse
Do you see anyone's signature? Maybe your browser is weird.
Here's the direct link.
http://forum.xda-developers.com/showthread.php?p=52585717
I still haven't found a manufactured case that I liked which has a good portrait kickstand.
But my DIY case does take a bit of work, patience and care.
Oh, I am very content with my reiko case now. I have seen your thread but did not make the connection. Now I am merely looking for a belt clip pouch to carry my note 3 in its case in. I have one pouch too small and another too large.