restore Tab to original firmware - Galaxy Tab 10.1 Q&A, Help & Troubleshooting

I have been trying to root and install the latest cwm and a custom rom to a galaxy tab wifi only uk version.I rooted and installed 5.0.2.7 cwm and a rom but when i rebooted it there was a password needed which i didnt have.It was a P7500 K11 restock rom if that is of any use.I would like to either go back to unrooted or just flash another rom but without usb mode i cannot copy another rom across to flash via cwm.
What would be the best method going forward for me now?
Thanks

potsykate said:
I have been trying to root and install the latest cwm and a custom rom to a galaxy tab wifi only uk version.I rooted and installed 5.0.2.7 cwm and a rom but when i rebooted it there was a password needed which i didnt have.It was a P7500 K11 restock rom if that is of any use.I would like to either go back to unrooted or just flash another rom but without usb mode i cannot copy another rom across to flash via cwm.
What would be the best method going forward for me now?
Thanks
Click to expand...
Click to collapse
look up a tutorial on how to set up adb
im pretty sure you can trasfer stuff accross to your tab when your in cwm using adb

Edit: that password needed is what you see when following the info below but forget the last step of doing the factory restore or reset, whatever it's called.
don't know that you need to go this far but below is my standard reply to posts like yours. hope this helps.
It's helped me and I've seen it help many others too.
Goto http://www.teamovercome.net/p7500/?page_id=5
Towards the bottom of the guide There is a section called Restocking yer system.
Follow that on down.
Make sure you use the files for you device (7500 or 7510).
Make sure you triple check that you follow everything as suggested. The most common one I see missed is the last step of doing a factory reset/restore.
Let us know how it goes, as this keeps us trying to help when we know we're successful. 
Also if you have any issues come up that you can't figure just ask. 
Sent from my GT-P7510 using XDA Premium HD app

Benzoman said:
Edit: that password needed is what you see when following the info below but forget the last step of doing the factory restore or reset, whatever it's called.
don't know that you need to go this far but below is my standard reply to posts like yours. hope this helps.
It's helped me and I've seen it help many others too.
Goto http://www.teamovercome.net/p7500/?page_id=5
Towards the bottom of the guide There is a section called Restocking yer system.
Follow that on down.
Make sure you use the files for you device (7500 or 7510).
Make sure you triple check that you follow everything as suggested. The most common one I see missed is the last step of doing a factory reset/restore.
Let us know how it goes, as this keeps us trying to help when we know we're successful. 
Also if you have any issues come up that you can't figure just ask. 
Sent from my GT-P7510 using XDA Premium HD app
Click to expand...
Click to collapse
Thanks for that,I finally managed to get it back to stock and I'm going to start again.Strangely enough I find this tab harder than my HD2 to mod with WM7 or Android even my new galaxy Nexus gave me less problems than this tab.Lesson learnt tho,,,read then read again !!!
Thanks

Related

[Q] Wierd Recovery screen after CWM installation

Hi All,
Hope you are well. I just flashed the CWM recovery to a locked tab using ODIN, and upon doing POWER + VOL(-) and getting into the recovery, for some reason the screen with all the menu to do wipes/install just seems to be scrolling all over the place.
When I re-flash the stock recovery back using ODIN, the screen is fine again. Tried both 4.0.0.4 and also the 3.2.0.1 versions, with not much luck.
Has anyone had a similar incident? Is there anything I can do? I wanted to try and flash my custom boot.img.
Thanks heaps in advance!!!.
Hi Folks,
Hope you are well - wasn't sure if anyone has come across this - but anyone seen the Recovery mode flickering / scrolling when flashed on a locked Galaxy Tab 10.1?
Thanks again!
I'm using CWM 4.0.0.4 on my locked P7510, works as intended.
http://forum.xda-developers.com/showthread.php?t=1171089
Thanks yqed,
For some reason when I have CWM 4.0.0.4, and when I reboot into the recovery mode - CWM shows up - but the screen keeps on flickering / scrolling / refreshing all over the place.
I'm wondering if there is something different in my Retail Galaxy Tab 10.1 WIFI vs. the others - I bought mine from Korea (retail). Appears that I have kernel version 2.6.36.3 instead of .4 and the build is EH14.
Thanks.
I to get some lag while using the cmw...
Sent from my Galaxy Tab!
+1
I have a Korean 32Gb wifi Galaxy Tab 10.1, and my CWM Recovery also starts having a seizure when I boot into it. It still seems to be working fine, but it is nearly impossible to use.
I would really like to know what causes this issue.
Thanks limenless,
Anyone seen this before? Anyone know if CWM 5 might potentially fix this - seens some thread with regards to this.
I was going to try and wipe the dalvik cache, and others, but seeing the screen is almost impossible to use in recovery mode, having a bit of difficulty there.
Any advice is much appreciated - if you need dumps and others, happy to provide - as long as I get some instructions...
Thanks.
frankus0512 said:
Thanks limenless,
Anyone seen this before? Anyone know if CWM 5 might potentially fix this - seens some thread with regards to this.
I was going to try and wipe the dalvik cache, and others, but seeing the screen is almost impossible to use in recovery mode, having a bit of difficulty there.
Any advice is much appreciated - if you need dumps and others, happy to provide - as long as I get some instructions...
Thanks.
Click to expand...
Click to collapse
Any luck bro? having same problem here..
Please help.. i realy want to root my tab 10.1
castiel19 said:
Any luck bro? having same problem here..
Please help.. i realy want to root my tab 10.1
Click to expand...
Click to collapse
Are you using the cwm5?
I'M just curious if so and you still get issues.
Sorry I can't really help.
If you can read this it was sent using my GT-P7510.
HOPING solution
frankus0512 said:
Hi All,
Hope you are well. I just flashed the CWM recovery to a locked tab using ODIN, and upon doing POWER + VOL(-) and getting into the recovery, for some reason the screen with all the menu to do wipes/install just seems to be scrolling all over the place.
When I re-flash the stock recovery back using ODIN, the screen is fine again. Tried both 4.0.0.4 and also the 3.2.0.1 versions, with not much luck.
Has anyone had a similar incident? Is there anything I can do? I wanted to try and flash my custom boot.img.
Thanks heaps in advance!!!.
Click to expand...
Click to collapse
Did you try CMW 5? Preshoot has a tutorial in the development section, its pretty simple just follow it and I think and hope that your issue would be solved!
Why dont you try taking a picture/screenshot of it, best would be using ddms.bat in the android development kit to take screenshot's , or just a picture would do great. Hard to guess what's going on, when someone mentioned seizure, I pictured Dr.House
Misledz said:
Why dont you try taking a picture/screenshot of it, best would be using ddms.bat in the android development kit to take screenshot's , or just a picture would do great. Hard to guess what's going on, when someone mentioned seizure, I pictured Dr.House
Click to expand...
Click to collapse
Thank you for showing interest to help me.. btw am also big fan of house
Let me explain my situation from the start..
i tried to flash recovery-cwm_4.0.0.4-sam-tab-10.1.tar.md5 following the instruction from the tutorial.. but after i boot into recovery the screen flash.. I will attach you tube video later..
took whole night to fix it with no success, finally decided to re-flash stock rom from firmware P7510ZSKK1_P7510ZZHKK1_TGY.. boot into stock recovery and worked fine..
as i don't want to give up and want my tab 10.1 to be rooted tried again to flash CWM5027 from preshoot.. but same screen flicker happened..
Please help me fix the problem.. or do you know other way to root my tab??
---------- Post added at 12:49 PM ---------- Previous post was at 12:40 PM ----------
castiel19 said:
Thank you for showing interest to help me.. btw am also big fan of house
Let me explain my situation from the start..
i tried to flash recovery-cwm_4.0.0.4-sam-tab-10.1.tar.md5 following the instruction from the tutorial.. but after i boot into recovery the screen flash.. I will attach you tube video later..
took whole night to fix it with no success, finally decided to re-flash stock rom from firmware P7510ZSKK1_P7510ZZHKK1_TGY.. boot into stock recovery and worked fine..
as i don't want to give up and want my tab 10.1 to be rooted tried again to flash CWM5027 from preshoot.. but same screen flicker happened..
Please help me fix the problem.. or do you know other way to root my tab??
Click to expand...
Click to collapse
how can i copy link of youtube here?? i want to show my screen flicker
Just link it here,
HTML:
[media=youtube] bracket [/media]
Where "bracket" is the ID of your video, those letters at the end. EG: FL7yD-0pqZg
Have you tried Overcome's CWM? I'm using that and it's perfectly fine. PS it's the ver 5 release.
PS; For being an epic House fan I shall see to it that you get it worked out
And to top that off, an offlink to the CWM of Overcome http://www.mediafire.com/?6c5tdmds927npdv
PS: Here's your video, Embedded anyways.
I'm on the same page. My screen flicker after entering CWM recovery mode. Very annoying.
In the development section for 10.1 I was just reading in a thread about a Korean ROM, Pershoot stated something about someones device not being compatible with his kernel. I don't know if either one has to do with the other but I think I read in the same thread of someone having "this problem"
Honestly don't know if anything between this thread and that thread are relevant to each other.
Just thought I'd mention it to see if it helps. sorry if it doesn't apply to anything here.
I somehow fixed it by flashing the tab with an non-HK 3.1 stock ROM using Odlin. then then cwm recovery works fine.
Not really a fix but
You could always just find a pre rooted rom to flash with odin, then once u have the pre rooted rom installed get rom manager and u will no longer have to worry about cwm. Plus u could then flash to whatever rom u need to using rom manager.
My method allows me to have a clear screen in CWM RECOVERY but after I flashed Galaxy Task 14 I get all blurred screen whenever my Tab is resumed from standby. I must set my screen to never turn off to prevent it flickering again.
May I ask which pre rooted ODLIN ROM do you guys recommend? If possible can you please provide the URL to it? I suspect the flickering problem has relation to the harmony between bootloader, kernel etc so I want to use the exact combination you guys are using.
Sent from my GT-I9100 using Tapatalk
Still not working
appreciate your help Misledz, 002001-Overcome_CWM_Recovery_v5.1.2.6 got same result.. my screen still flicker..
I think I will give up on CWM too complicated for me
Can you just give me tips on how to root my tab 10.1 without CWM (if that is possible)
sunnymui said:
My method allows me to have a clear screen in CWM RECOVERY but after I flashed Galaxy Task 14 I get all blurred screen whenever my Tab is resumed from standby. I must set my screen to never turn off to prevent it flickering again.
May I ask which pre rooted ODLIN ROM do you guys recommend? If possible can you please provide the URL to it? I suspect the flickering problem has relation to the harmony between bootloader, kernel etc so I want to use the exact combination you guys are using.
Sent from my GT-I9100 using Tapatalk
Click to expand...
Click to collapse
What Stock Rom did you use? a, planning to download stock rom
P7510ZCLA1 ## 2012 February P7510OZHLA1 China Download
From samfirmware and flash... hope I can use CWM and instal ROM
for the past 3 hours I tried to search pre rooted ROM that can be flash using Odin with no avail

[Q] Root and Rom

Yes i just bought a galaxy Ace and i was wondering if there was an easy way to root or a step by step too root this device
and also what the best Rom was for this phone is
i am from canada here and on the koodo network
For now the unofficial Cyanogenmod7 works best with my usage.
And for the first question, for the love of chuck norris, just google how to root your device... It's as simple as pressing a button. *hint*
I know i find ones and such but it just seems time consuming and what not lol
Sent from my GT-S5830D using XDA App
Please read the damn stickies.
Buckii said:
I know i find ones and such but it just seems time consuming and what not lol
Click to expand...
Click to collapse
Then don't do it. Simple as that.
Figured instead of posting a new thread I'd reply here. I'm in the similar situation sorta, just had a few questions.
My model is the GT-S5830D 2.3.4 and I have Gingerbread.DTLKI4. I haven't encountered any threads with the similar build. I also noticed with KIES it tells me that my phone is not upgradeable. I'm wondering if Koodo put a proprietary lock on my phone and I'm curious whether I can still root my phone? Do you have to unlock in order to root? I've read a bit but I'm having a hard time grasping this concept.
Thanks.
chevymeister said:
Figured instead of posting a new thread I'd reply here. I'm in the similar situation sorta, just had a few questions.
My model is the GT-S5830D 2.3.4 and I have Gingerbread.DTLKI4. I haven't encountered any threads with the similar build. I also noticed with KIES it tells me that my phone is not upgradeable. I'm wondering if Koodo put a proprietary lock on my phone and I'm curious whether I can still root my phone? Do you have to unlock in order to root? I've read a bit but I'm having a hard time grasping this concept.
Thanks.
Click to expand...
Click to collapse
Im guessing that "Koodo" is your carrier? You have to root your device before being able to unlock it at all so it wont really matter what carriar ure on.
I think that's how it works, since i got my ace w/o contract I didnt have to deal with this.
edit: beware, unlocking your phone may brick your phone, or maybe just loosing ure IMEI (source: all the xda threads)
Yes Koodo is the carrier i my self am not 100% sure what they did to it if anything at all to the phone i know i seen a few root guides online just seems like it's alot to do to root it i am sure it can be did i have full access to rom manager and would like to toss a custom rim on this unit as i did with my lg optimus one is all to which is running void forever... Plus to be able to get rid of all the bloatware in this phone would be nice any how a little help would be grand
Sent from my GT-S5830D using XDA App
Buckii said:
Yes Koodo is the carrier i my self am not 100% sure what they did to it if anything at all to the phone i know i seen a few root guides online just seems like it's alot to do to root it i am sure it can be did i have full access to rom manager and would like to toss a custom rim on this unit as i did with my lg optimus one is all to which is running void forever... Plus to be able to get rid of all the bloatware in this phone would be nice any how a little help would be grand
Sent from my GT-S5830D using XDA App
Click to expand...
Click to collapse
Rooting SGA is not hard at all, sga was my first android phone and I was able to root it on my 2nd day of using it.
DONT use Rom Manager, just flash CWM (clockworkmod) and use it instead, ull probably brick your phone using Rom Manager (even after doing backup and stuff).
edit: it just seems to be a lot of step when rooting SGA, i assume you read the information from this thread:
http://forum.xda-developers.com/showthread.php?p=12874680#post12874680
If you reduce obvious steps like "2) Turn on your phone" "4) Connect your phone into PC via cable" etc. ull get a very short tutorial.
like this:
(text in italic = added/edited text)
C. Rooting for 2.2.1:
2) Enable Debugging at Apliccations>Programming
3) Connect your phone into PC via cable
4) Launch Super One Click 2.1.1 and Click "Root", wait.
7) When the process is complete turn off SOC and unplug your phone and reboot it.
So it's actually just 4 steps.
Not bad so your saying I should toss rim manager off and such... I now see it easier then i had read before lol... Now what about flashing new software like stock gingerbread? Will it free memory up and what rom would you suggest for this model CM7 or something lighter?
Sent from my GT-S5830D using XDA App
Buckii said:
Not bad so your saying I should toss rim manager off and such... I now see it easier then i had read before lol... Now what about flashing new software like stock gingerbread? Will it free memory up and what rom would you suggest for this model CM7 or something lighter?
Sent from my GT-S5830D using XDA App
Click to expand...
Click to collapse
Yes, never use Rom Manager is my tip, even though it does work in very few cases... And as I mentioned, use CWM instead.
I would recommend CM7 to the more experienced users; not saying you need to be a pro to use it, but it's not as stable as the stock roms. Just stay away from settings that you dont know anything about and you should be good (especially the options in performance).
Flashing roms and such are all in the link that i posted before, take some time reading it and you should be good to go.
Perfect... See i typically do read through all guides but beeing new to android by about a year now it dont hurt for advice from people that has been around the OS for a abit longer and have had experience in said things
Sent from my GT-S5830D using XDA App
Oh ok, you need to root before you unlock anyway. Cool. I wanted to root it anyway, just wasn't sure if it was before or after unlocking. I just seem to have some proprietary Koodo firmware on here so if I could remove it I'd be alot happier. I just see lots of flash tutorials for old versions like 2.2.1, not 2.3.4. Wasn't sure if it would be compatible still or not. I just want my phone to be like one I got from samsung, not one from Koodo. Proprietary bungholes. Lol.
chevymeister said:
Oh ok, you need to root before you unlock anyway. Cool. I wanted to root it anyway, just wasn't sure if it was before or after unlocking. I just seem to have some proprietary Koodo firmware on here so if I could remove it I'd be alot happier. I just see lots of flash tutorials for old versions like 2.2.1, not 2.3.4. Wasn't sure if it would be compatible still or not. I just want my phone to be like one I got from samsung, not one from Koodo. Proprietary bungholes. Lol.
Click to expand...
Click to collapse
Dont know if you noticed but ill quote the part for 2.3.4, download link is in the first post of the "how to root-thread".
"E. Unrooting for 2.3.3/2.3.4/2.3.5 (Thanks to ingbrzy):
1) Download attached file called unroot.zip and copy it to your sdcard
2) Turn off your phone
3) Press POWER+HOME BUTTON
4) Select update from sdcard, select the file unroot.zip
5) After the update completed - reboot
6) Now you have rooted S5830"
In 2.1.1 you wont be able to chose zip, dont know if that is the case for you. But if that is the case simply change the unroot.zip to update, then chose to update your phone and it will automatically search and chose it.
Gingerbreak exploit works for Ace right?
Thanks man! I didn't find that thread. I just came to my phone section and read the sticky but it didn't advise me so.
Thanks again! Will try this in a bit!
Wait: edit. Read that again... Unrooting...rooting?...hrm. I wanted to root. Last line says root but the title says unroot.
chevymeister said:
Thanks man! I didn't find that thread. I just came to my phone section and read the sticky but it didn't advise me so.
Thanks again! Will try this in a bit!
Wait: edit. Read that again... Unrooting...rooting?...hrm. I wanted to root. Last line says root but the title says unroot.
Click to expand...
Click to collapse
Yeah, sorry about that.
Copied the wrong text:
D. Rooting for 2.3.3/2.3.4/2.3.5 (Thanks to russian forum-user with nickname may213):
1) Download attached file called upd_1.zip and copy it to your sdcard
2) Turn off your phone
3) Press POWER+HOME BUTTON
4) Select update from sdcard, select the file upd_1.zip
5) After the update completed - reboot
6) Now you have rooted S5830
But dont be lazy, just check the thread for further details
basically same principal as unrooting.
When ever I read this title "root and rom" u thinkvof the song bounce and boom :s lol
Sent from my GT-S5830 using xda premium
I tried gingerbreak and did not work and that i think the name is z4root and that just stays at the text "applying exploit thing" and i tried superoneclick or what not and it freezes windows while detecting device i tried holding home and power got into recovery gave me option to run the update with zip does stuff then abortion due to file missing so rooting this thing as per many instructions just is not working with me lol
Sent from my GT-S5830D using XDA App
And it's funny i had the LG Optimus One through Koodo and the root was easy as ssh!t and i slapped a version of void. #Forever on it and worked great but i then used my tab towards this because I was 26 bucks short for the Nexus S. Gah now even if i took it back any way this damn phone is abit rough damn the bloatware
Sent from my GT-S5830D using XDA App

[Q] Read until my eyes hurt....I'm sorry i have to ask....

This is my very first smartphone as I have been to poor to get one before now. I have Att SGS2. From what i have read i have made a bad decision when doing the factory upgrade to uckk6.
The thing is I want to root the phone, put on custom mods....but I am having a hard time grasping it. I don't want to mess anything up and I dont want to lose my photos and such that are on the phone.
I dont know where to even start.....backup program? or? what all programs or apps i need?
before I upgraded, i downloaded a super1click program and it said it was rooted...then i tried to use the phone and there was soooo much lag in the response time..... i hit the unroot button and tried to use the phone and same thing...restarted phone and it was fine. While it was rooted tho, the damn superuser part asked for money before i could even do anything, that was second reason for unroot and of course thinking i may mess up my phone.
I have tried asking all my friends and to no avail have succeeded in finding anyone that has rooted a phone and/or flashed custom roms.
Like I said in the title, i have been to many different sites even trying to read up and I would rather be safe than sorry. If someone could plz help me out here I would be very grateful.
I am hoping I don't get spazzed at like i seen in a few other posts of other ppl.
And i have seen where someone sent ppl to:
[Heimdall][Odin][Stock][Root]UCKH7/KK6 Return/Unbrick to Stock (or Root
but that doesnt get my foothold on where to start at.
Please don't write me off as a lost cause because I would like to enjoy the benefits of having a rooted phone and custom roms as the rest of you that are intelligent enough to do so. At one point I'm sure you were where i am. I am very eager to learn and can't wait!
While I was writing this i downloaded the Uckk6_stock_rooted.tar.7z not sure if i need it or what though.
Thanks
Follow this guide TO A TEE, and you shouldn't have any problems. It also won't trigger the flash counter so you can take it back for repairs and Samsung won't know you've done anything to it. Use (2C) Entropy's version using windows to root as the others won't work with the OTA update. If you have a MAC, use 2D. Folow the directions EXACTLY how their written. This will get you rooted. Drop down to 3B and again, FOLLOW THE DIRECTIONS EXACTLY HOW THEIR WRITTEN. After this is done, you have a Entropy's kernel with CWM. You can then download any COMPATIBLE rom to your internal SD card and flash the rom with CWM.
To save your pics and such, just hook your phone to your puter via the USB cord and copy/paste, or drag and drop to a file on your computer.
GUIDE
thx again axis01. i sent you a couple pm's with a few more detailed questions also
um.....got past the first part 2c......my wifi doesn't work now????
sorry for spazzing i guess. just trying to learn lol.
my phone wont connect to any wifi, turn it on, few seconds later it shuts itself off....... plz somone help asap! its 5 am now....gonna sleep, hopefully response tomorrow.
thx in advance
help came in later post to wipe. thanks
Did you root with kh7? I see you had kk6 stock. If you went back to kh7 (2.3.4) wifi breaks and have to wipe data. Look at entrophy's thread about it. The return to stock one
Head back over to sticky land... Rooting is the easy part.
http://forum.xda-developers.com/showthread.php?t=1285894
sent from my Galaxy SIII ...haha jk, I FOiLed ya!
I just don't understand why people who can't comprehend the process of rooting or flashing even try. It's not like this phone sucks stock that they just have to mod it to make it workable. None of this is rocket science, but if you don't understand it beforehand then JUST LEAVE YOUR PHONE ALONE! It will be 100 times harder to fix it if you don't know how you messed it up in the first place. It really isn't fair to expect people in here to bail you out when things go wrong because you didn't know what you were doing. The warnings aren't there to keep you from the good stuff. They're there so that you'll think before doing and only do once you understand.
Miami_Son said:
I just don't understand why people who can't comprehend the process of rooting or flashing even try. It's not like this phone sucks stock that they just have to mod it to make it workable. None of this is rocket science, but if you don't understand it beforehand then JUST LEAVE YOUR PHONE ALONE! It will be 100 times harder to fix it if you don't know how you messed it up in the first place. It really isn't fair to expect people in here to bail you out when things go wrong because you didn't know what you were doing. The warnings aren't there to keep you from the good stuff. They're there so that you'll think before doing and only do once you understand.
Click to expand...
Click to collapse
my apologies
Dude stop spazzing out. And don't encourage Miami. Hes helpful but has no patience with this type of stuff. Frankly it was pretty obvious from your first post you were gonna come back with freak out apocalyptic questioning about stuff thats pretty basic.
You did everything in 2c?
Can you still enter download?
Do you have clockwork mod recovery? (Hold all three buttons until you see basic text on your screen... usually like 10 seconds.)
Did you back your contacts up?
Sent from my SGH-I777 using xda premium
Error........
nyamoV2 said:
Did you root with kh7? I see you had kk6 stock. If you went back to kh7 (2.3.4) wifi breaks and have to wipe data. Look at entrophy's thread about it. The return to stock one
Click to expand...
Click to collapse
Thank you for that info. i did the wipe and it restored my wifi. should i update my superuser? for some reason in the market it's showing with an update
I was going to say wipe data but.wanted to be sure you backed your contacts up first.
Dude relax. If it says update, go ahead and update. What's the big deal?
Sent from my SGH-I777 using xda premium
33t said:
Dude stop spazzing out. And don't encourage Miami. Hes helpful but has no patience with this type of stuff. Frankly it was pretty obvious from your first post you were gonna come back with freak out apocalyptic questioning about stuff thats pretty basic.
You did everything in 2c?
Can you still enter download?
Do you have clockwork mod recovery? (Hold all three buttons until you see basic text on your screen... usually like 10 seconds.)
Did you back your contacts up?
Sent from my SGH-I777 using xda premium
Click to expand...
Click to collapse
I did everything in 2c.
When entering download mode i still get
Odin Mode
Product name: SGH-I777
Custom Binary Download: NO
Current Binary: Samsung Official
I do have CWM and i backed up my contact on Kies.
As mentioned now, i have wiped the phone and wifi is working, but have read in forums where ppl have had it stop working again.
In creepyncrawlys guide I didn't read where it said it needed to be wiped?
Thanks
I've read everything in your thread so far and it sounds like everything is fixed. If wifi works and you have root, cwm, and superuser you should be good to go. Go install roms and enjoy. Really doubt your wifi is going anywhere. I'm far from a programmer or anything like that, and from my experience, if you follow the instructions it's hard to **** this phone up beyond repair firmware wise so freaking out is pointless.
Sent from my SAMSUNG-SGH-I777 using Tapatalk
I bought the phone, rooted it and flashed a custom rom all yesterday. I was on KK6 2.3.6. Here is EXACTLY what I did:
Get Odin 1.7 from here:
http://forum.xda-developers.com/showthread.php?t=832827
Get Samsung Kies from here (only way my computer would pick up the phone):
http://mirror10.downloadandroidrom.com/download/Samsung/Kies_2.0.3.11082_152_4.exe?token=512181517
Follow 2c from here:
http://forum.xda-developers.com/showthread.php?t=1311081
Then Step 3A in the same thread.
My phone restarted and I was rooted. My WiFi didn't work. Wiped all data in Clockwork Mod Recovery and I was all set. Then I unlocked my phone (this is optional). Then I flashed a ROM. Easy.
Seems like you're all set if I you did something close to that^
I used ICScrewD (http://forum.xda-developers.com/showthread.php?t=1375255)
Another popular option is UnNamed (http://forum.xda-developers.com/showthread.php?t=1299474)
Kernels:
Entropy DD (http://forum.xda-developers.com/showthread.php?t=1289460)
Siyah (http://forum.xda-developers.com/showthread.php?t=1367800)
croftmx said:
I did everything in 2c.
When entering download mode i still get
Odin Mode
Product name: SGH-I777
Custom Binary Download: NO
Current Binary: Samsung Official
I do have CWM and i backed up my contact on Kies.
As mentioned now, i have wiped the phone and wifi is working, but have read in forums where ppl have had it stop working again.
In creepyncrawlys guide I didn't read where it said it needed to be wiped?
Thanks
Click to expand...
Click to collapse
Sounds like you're all set.
Don't use keis for anything. You only needed the drivers. Leave it closed. Figure out another way to get your contacts back.
Sent from my SGH-I777 using xda premium
Croftmx, take the bullets but don't shoot them back while you are in learning curve, you have freedom of writing your comments about others, but i am afraid that may be end of help you seek from many who intend to help.just be kind and get your issues fixed, and move on, pal.
croftmx said:
my apologies
Click to expand...
Click to collapse
I sure wish I'd read the post before you edited it. Hope you got the help you needed.

[Q] Root Xperia Neo MT15i, Version 4.0.4, Build 4.1.B.O.587

So i still cant get my phone rooted.
I have searches all over this forum and find many threads. I have tried many of them and nothing works. For normal people like me mutch of the words and explanations developers give are to complex to understand. I hardly know what a bootloader is, or a cmw file. And even a harder time finding out where and whitch files to download.
Is there not anybody out there who can give a step by step walktrough with links to what to download and how to use it for my kind of version.
I just want to root my darn phone to let Cyanogenmod take it over and make it happy again Any Mod suggestion would be great to.
Ps: i easly rooted and use Cyanogenmod 10 on my Galaxy Tab 2 so i'm not totally retarded
You rooted a galaxy but dont know what cmw is?
Anyway, all instructions are found in the sticky threads. More especially, read the second sticky thread in that section. All instructions ahve been given in exact detail there...
If you are usnsure what the words mean I suggest you read up on them as if you dont know what to do you can damage your phone.
As i said i'm kina a noob. And instead of just confusing me more why don't you or anybody else just try to link me to a guide that works.. As i said i have tried many of the guides in sticky treads and some links there are dead and others dont work.
I have updated to latest ICS and heard that i should be carefull so i dont brick my phon..as the reason i try to get help here. I found a easy guide for my tab where there was a walktrough wit links to the software i needed to downmload and use. And that is what i need here too.
So instead of complaining about how unknowledge i am cant i just get some help instead???
If you would tell us what you tried and where you stuck, maybe someone could help you.
Sticky thread in general section have valid links, as far as I know.
ivmntc autumn
Y dont u unlock bootloader or install CWM and get CM9 or CM10 installed instead of rooting and then flashing CM?
By the way CWM helps u to easily flash ROMS and take nandroid backups and restore them.
So i can Just unlock bootloader and use av rom without rotting at all? This would be great because i only wanted to root it to use rom's on it.
Feel like a kid with a new toy now. Gona run home and try it asap
Some ROM's(like CM,AOKP,AOSP...) require custom kernel.
Some ROM's(mostly, stock based) can work on locked bootloader.
Most(99%) of ROM's are already prerooted.
To install any custom rom, you need CWM, to get CWM you ether need to have root and after that install CWM, or you can flash custom kernel with (in 99% of them) already included CWM.
So for us mortals the problem is still on. Tried to open the bootloader with sony's own tool, but when i turn of my phone and connect usb to get to bootloader it does not findt any drivers.. Even though i downloaded it.
I just want C-mod 10 on my phone and that's it. So how do i flash the custom kernel when i ned cmw to even get it rooted? Sorry but i guess i'm a big noob at this.
Are you on XP?
if yes,
Try to install the drivers on Safe Mode and Plug your mobile while pressing Menu key.
It will install the drivers.
I'm on Windows 7. Acording to the tutorials i found when i plug my phone to usb there should come up a message that says "could not install drivers, and from there i can find them manually.. But no such message comes up and there is nothing in device manager either.
I'm totally lost here. Have tried to root my phone before so maby some old drivers are the reason for this?
Horgyboy said:
I'm on Windows 7. Acording to the tutorials i found when i plug my phone to usb there should come up a message that says "could not install drivers, and from there i can find them manually.. But no such message comes up and there is nothing in device manager either.
I'm totally lost here. Have tried to root my phone before so maby some old drivers are the reason for this?
Click to expand...
Click to collapse
.....
So i finally got my phones bootloader unlocked. i used this link to get it done. http://xperiadev.wordpress.com/guidelines-xperia/unlock-bootloader/
So now is the question what next to get my cyanogenmod on my phone.. Am a little scared because i heard that the version i hvae can easily be bricked.
Any ideas.?
Just install custom rom using cwm and dont forget to backup first your current rom using cwm. Later if got any problem and u can just restore it back.
Sent from my MT25i using xda app-developers app
ricco7 said:
Just install custom rom using cwm and dont forget to backup first your current rom using cwm. Later if got any problem and u can just restore it back.
Sent from my MT25i using xda app-developers app
Click to expand...
Click to collapse
That was my plan too as i have done the same on my tab. Place cwm and rom on phone and then boot in recoverymode to install rom.. But for some reason my phone wont go in any kind of boot mode.. Tried all the buttons and nothing works.. Any ideas?

[Q] Custom Rom Problems?

Hello all
I have searched all over but have not found any similar problems.
I rooted my phone and installed CWM and would like to install a custom rom that exists for Gingerbread 2.3.6 (I flashed back to stock OS), I have found the rom that I seem to like a lot (Atomic rom) however when I put the .zip file into my external sd and use rom manager to install the rom it turns off, then the phone boots back up... Any ideas about what is happening? Maybe I do not have everything rom manager needs?
I am definitely not ready to flash the new rom using odin, unless you put the .zip file into PDA section and hit "Start" when the phone is in download mode... from the forums I read it is not as easy as installing the stock OS
Thanks in advance!
HeyLookItsKarl said:
Hello all
I have searched all over but have not found any similar problems.
I rooted my phone and installed CWM and would like to install a custom rom that exists for Gingerbread 2.3.6 (I flashed back to stock OS), I have found the rom that I seem to like a lot (Atomic rom) however when I put the .zip file into my external sd and use rom manager to install the rom it turns off, then the phone boots back up... Any ideas about what is happening? Maybe I do not have everything rom manager needs?
I am definitely not ready to flash the new rom using odin, unless you put the .zip file into PDA section and hit "Start" when the phone is in download mode... from the forums I read it is not as easy as installing the stock OS
Thanks in advance!
Click to expand...
Click to collapse
you leave so many questions unanswered here. you have provided some information here, but not the vital info and the last part is very confusing.
im sorry, I know you are new here, but you lead me to ask some very generic questions....................
are you in the right forum for the right phone? this is for the Note1
I only ask this because I cant even find any GB ROMS for this phone. the Note 1 has been updated to official JB. I would and I am sure you would hate to flash wrong files to wrong phone and wind up with a BRICK.
I am not trying to make it sound as if you don't even know what phone you have, but you would not be the first to flash wrong and kill your phone.
may I suggest you read up in the "Super Everything Thread", which is in the General Forum. you will find exactly that, EVERYTHING, there. Odin is no big deal and super easy to use. also most don't even use CWM or ROM MANAGER anymore. TWRP is now the RECOVERY of choice and much more user friendly.
there are also many YOUTUBE tutorals that can walk you through. but first, lets make sure you are in the right place.
your phone is a ???????? NOTE 1
you carrier is ?????? att, tmo, ver, sprint
it is presently running ??????? GB, ICS, JB
good luck and let us know if we help
Saurom!!!!!!! ¡¡¡¡¡¡!!!!!!! I is a custom gb rom for our i717 note
2§HAYNE
shayneflashindaily said:
Saurom!!!!!!! ¡¡¡¡¡¡!!!!!!! I is a custom gb rom for our i717 note
2§HAYNE
Click to expand...
Click to collapse
SAUROM !!!!
captemo said:
you leave so many questions unanswered here. you have provided some information here, but not the vital info and the last part is very confusing.
im sorry, I know you are new here, but you lead me to ask some very generic questions....................
are you in the right forum for the right phone? this is for the Note1
I only ask this because I cant even find any GB ROMS for this phone. the Note 1 has been updated to official JB. I would and I am sure you would hate to flash wrong files to wrong phone and wind up with a BRICK.
I am not trying to make it sound as if you don't even know what phone you have, but you would not be the first to flash wrong and kill your phone.
may I suggest you read up in the "Super Everything Thread", which is in the General Forum. you will find exactly that, EVERYTHING, there. Odin is no big deal and super easy to use. also most don't even use CWM or ROM MANAGER anymore. TWRP is now the RECOVERY of choice and much more user friendly.
there are also many YOUTUBE tutorals that can walk you through. but first, lets make sure you are in the right place.
your phone is a ???????? NOTE 1
you carrier is ?????? att, tmo, ver, sprint
it is presently running ??????? GB, ICS, JB
good luck and let us know if we help
Click to expand...
Click to collapse
Sorry about that... I have the Samsung Galaxy Note i717 for AT&T and I am running Gingerbread 2.3.6
I thought that if a rom could run on GB it could run on any phone that has GB but your response has lead me to know that it also depends on what phone I'm running, so thanks!
I'll go and double check to see if the rom I tried to install was for the note... I guess I'm lucky I didn't brick my phone when I tried flashing the other 2 rome xD... Gonna count my blessings tonight lol
HeyLookItsKarl said:
Sorry about that... I have the Samsung Galaxy Note i717 for AT&T and I am running Gingerbread 2.3.6
I thought that if a rom could run on GB it could run on any phone that has GB but your response has lead me to know that it also depends on what phone I'm running, so thanks!
I'll go and double check to see if the rom I tried to install was for the note... I guess I'm lucky I didn't brick my phone when I tried flashing the other 2 rome xD... Gonna count my blessings tonight lol
Click to expand...
Click to collapse
don't need to apologize to me for anything. the more information the better. not only are there so many phones out there, there are variations of those phones that have gotten people in trouble.
you have the North American version
International version
Korean version
different internals and wont all take same ROM. just be careful my friend.
shayneflashindaily said:
Saurom!!!!!!! ¡¡¡¡¡¡!!!!!!! I is a custom gb rom for our i717 note
2§HAYNE
Click to expand...
Click to collapse
I am looking into this rom, looks pretty interesting. Flashing the "AT&T fix" though, do I put that on my SD card also?
Update: For some reason I can not install rome
I am not sure what I am doing wrong because I have Rom manager do everything when I put the .zip file on my SD card and the phone restarts like normal, I even tried doing it manually in cwm recovery. I have no idea what I am doing wrong. And this rom I know for sure is meant for GB and the i717.
Any suggestions? Thanks again
You mean it's a gb rom meant for the i717 galaxy note....... I think you may be a little mixed up on what a rom is and what your actually doing...... Explain in detail what exact steps your doing when your flashing the rom so someone can help you.
2§HAYNE
shayneflashindaily said:
You mean it's a gb rom meant for the i717 galaxy note....... I think you may be a little mixed up on what a rom is and what your actually doing...... Explain in detail what exact steps your doing when your flashing the rom so someone can help you.
2§HAYNE
Click to expand...
Click to collapse
I appreciate your patience
Step 1: I put the downloaded .zip rom (saurom) into my external sd card in a special folder I named Roms
Step 2: I fire up Rom manager and go to "Install ROM from SD Card"
Step 3: Go to folder containing the Saurom .zip file and select it
Step 4: Make sure "Backup Existing Rom" and "Wipe Data and Cache" are selected
Step 5: Hit "Reboot And Install"
The phone will then turn off and restart like normal, I check but the rom did not install. I honestly have no idea how I'm screwing up lol
Do you have a custom recovery installed....
Sent from my SAMSUNG-SGH-I717 using xda app-developers app
HeyLookItsKarl said:
I appreciate your patience
Step 1: I put the downloaded .zip rom (saurom) into my external sd card in a special folder I named Roms
Step 2: I fire up Rom manager and go to "Install ROM from SD Card"
Step 3: Go to folder containing the Saurom .zip file and select it
Step 4: Make sure "Backup Existing Rom" and "Wipe Data and Cache" are selected
Step 5: Hit "Reboot And Install"
The phone will then turn off and restart like normal, I check but the rom did not install. I honestly have no idea how I'm screwing up lol
Click to expand...
Click to collapse
You have to understand this as well, the ROMS do not install in conjunction or within the current Stock ROM. They replace them. So as stated above you have to make sure you have CWM or TWRP installed and boot directly to the custom recovery. Then wipe your data/system/cache/dalvik and after all of that install the ROM of choice.
http://forum.xda-developers.com/showthread.php?t=1525341
The very first thing listed in this topic is how to install Saurom. No where does it say to try and do it through ROM Manager.
Maybe that is where your hiccup is coming from?
No further instructions needed good luck and happy flashing
2§HAYNE
ZacksBuilds said:
Do you have a custom recovery installed....
Sent from my SAMSUNG-SGH-I717 using xda app-developers app
Click to expand...
Click to collapse
Yes
KSoD said:
You have to understand this as well, the ROMS do not install in conjunction or within the current Stock ROM. They replace them. So as stated above you have to make sure you have CWM or TWRP installed and boot directly to the custom recovery. Then wipe your data/system/cache/dalvik and after all of that install the ROM of choice.
http://forum.xda-developers.com/showthread.php?t=1525341
The very first thing listed in this topic is how to install Saurom. No where does it say to try and do it through ROM Manager.
Maybe that is where your hiccup is coming from?
Click to expand...
Click to collapse
Alright so I forgot that I had to wipe the data/system / cache / dalvik
But even when I tried that just now and went into installing the .zip file it said that the installation failed, is it because cwm was removed when I wiped the device?
Update your recovery to twrp 2.6
Sent from my SGH-I717 using xda app-developers app
What would updating the recovery do?
Gets rid of status 7 error that makes it unable to flash.
Sent from my SGH-I717 using xda app-developers app
HeyLookItsKarl said:
Yes
Alright so I forgot that I had to wipe the data/system / cache / dalvik
But even when I tried that just now and went into installing the .zip file it said that the installation failed, is it because cwm was removed when I wiped the device?
Click to expand...
Click to collapse
How do you forget that? That's the whole point besides actually flashing the rom... It's a must.... Smfh
2§HAYNE
ZacksBuilds said:
Gets rid of status 7 error that makes it unable to flash.
Sent from my SGH-I717 using xda app-developers app
Click to expand...
Click to collapse
So could I flash using GooManager?
shayneflashindaily said:
How do you forget that? That's the whole point besides actually flashing the rom... It's a must.... Smfh
2§HAYNE
Click to expand...
Click to collapse
haha, only problem is that the rom hit an error anyways so I'm still lost at what I am doing wrong...
Another question, when I reset all of the settings and stuff before I flash the rom, wouldn't that get rid of titanium back up? then how would I restore my apps and data?
Yes you are right... But first stick your phone in the freezer for 2hrs...then microwave it for 3 mins... It will cause your recovery to reconstruct and see your internal storage enabling developer options to be on... Then hit the rom installer button.
2§HAYNE
---------- Post added at 03:36 AM ---------- Previous post was at 03:33 AM ----------
Disregard last post I put..... Go to super everything thread.....
2§HAYNE

Categories

Resources