Hello everybody,
So I flashed the PDroid Patch & Frameworkmod for CyanogenMod 7.2 cooper KANG RC0 Android 2.3.7 by vo-1 (23.01.2012) at http://forum.xda-developers.com/showthread.php?t=1360889 . So it turned out fine. Then I tried to install the "Precise Volume Control - Smooth Scroll - Battery Drain" modded framework but whenever I installed it I would get stuck at the boot animation. What exactly must I do to install the framework?
Also I tried restoring the backups but it kept saying md5 sum mismatch. any idea how to fix this?
Alluh said:
Hello everybody,
So I flashed the PDroid Patch & Frameworkmod for CyanogenMod 7.2 cooper KANG RC0 Android 2.3.7 by vo-1 (23.01.2012) at http://forum.xda-developers.com/showthread.php?t=1360889 . So it turned out fine. Then I tried to install the "Precise Volume Control - Smooth Scroll - Battery Drain" modded framework but whenever I installed it I would get stuck at the boot animation. What exactly must I do to install the framework?
Also I tried restoring the backups but it kept saying md5 sum mismatch. any idea how to fix this?
Click to expand...
Click to collapse
Try wipe data/factory reset in recovery and then reboot may be it can help you.
Or
Just reflash that ROM or any other ROM.
P.S - I guess you are not stuck at boot animation, you just want to install Framework.
Have you done mount/system before flashing it in recovery ?
bhardwajme said:
Try wipe data/factory reset in recovery and then reboot may be it can help you.
Or
Just reflash that ROM or any other ROM.
P.S - I guess you are not stuck at boot animation, you just want to install Framework.
Have you done mount/system before flashing it in recovery ?
Click to expand...
Click to collapse
I tried doing that but I still get stuck at boot animation.
Alluh said:
I tried doing that but I still get stuck at boot animation.
Click to expand...
Click to collapse
Did you edit the correct lines in framework?
TeamCooper Developer
shaaan said:
Did you edit the correct lines in framework?
TeamCooper Developer
Click to expand...
Click to collapse
No. How do you do that?
EDIT: I didn't edit any lines in framework. How do you edit it? And how do you install the framework?
someone help plz... I really don't know how to enable the framework...
Use uot kitchen
Dont mod anything just upload
Thrn you will have flashable zip
Sent from my GT-S5830 using xda premium
Alluh said:
Hello everybody,
So I flashed the PDroid Patch & Frameworkmod for CyanogenMod 7.2 cooper KANG RC0 Android 2.3.7 by vo-1 (23.01.2012) at http://forum.xda-developers.com/showthread.php?t=1360889 . So it turned out fine. Then I tried to install the "Precise Volume Control - Smooth Scroll - Battery Drain" modded framework but whenever I installed it I would get stuck at the boot animation. What exactly must I do to install the framework?
Also I tried restoring the backups but it kept saying md5 sum mismatch. any idea how to fix this?
Click to expand...
Click to collapse
1.Do you mount system before install ?
2.Check your name file backup.. use spasi or not ? if yes, rename it with no spasi
miftah_fr said:
1.Do you mount system before install ?
2.Check your name file backup.. use spasi or not ? if yes, rename it with no spasi
Click to expand...
Click to collapse
Im sorry I'm quite new at this but...whats spasi?
EIDT: I did mount my system before installing but it still gets stuck at boot animation
Well as its a System App
don't sign it ... just leave it unsigned and try
apparently ur framework has some problems
music.soul said:
Well as its a System App
don't sign it ... just leave it unsigned and try
apparently ur framework has some problems
Click to expand...
Click to collapse
What do you mean by signing it?
Nvm lol I think the rom that I installed already had the framework in it. LOL.
Related
hellow dev...
please help me..
asking someting...
how can i install this rom? Atrix 4g ICS Codename..
you can see this http://cna.exynos.co/olympus/
it have update till 28.03.2012...
so when i install it...it come back to recovery...
im love ICS..
tq..please help me...
you have to choose one version, download and copy to your device
1. run recovery
2. wipe data, cache, dalvik
3. install zip from your device
4. reboot
i do step by step...still reboot recovery...
have u try it?
Did you install CWM? My buddy had the same problem with rebooting into recovery.
Sent from my MB860 using XDA
I tried flashing it and it does indeed just reboot to recovery. Have no idea why.
What it actually does is sits at boot logo screen, then reboots to recovery, so it actually bootloops once into recovery each time you try to boot it up.
CaelanT said:
I tried flashing it and it does indeed just reboot to recovery. Have no idea why.
What it actually does is sits at boot logo screen, then reboots to recovery, so it actually bootloops once into recovery each time you try to boot it up.
Click to expand...
Click to collapse
need the bins files and libcxxx from cm9 to stop reboot to recovery
stevendeb25 said:
need the bins files and libcxxx from cm9 to stop reboot to recovery
Click to expand...
Click to collapse
Cheers. I just tried flashing it to see if I got same issue as OP. Hopefully your comment will help him/her.
Sent from my MB860 using xda premium
need the bins files and libcxxx from cm9 ???
can i just take from cm9 source??
I got it booting using cm9 as base.
All you gotta do is delete app/framework from cm9 then push all app/framework of codename to see at least what the ui looks like and what options and features it has
Sent from my MB860 using XDA Premium App
rickriego replaced the bin/libs in the CNA zip with the ones from cm9 and posted a flashable zip over in the dev section for anyone interested.
I know there is a version using Jokersax's files but has anyone gotten it to work with Turl's files. The camera does not work with the newest jokersax as Rodriego uses, so I tried to use Turl's, and it just got stuck on the bootscreen. Thanks in advance.
fl1p1slander said:
I know there is a version using Jokersax's files but has anyone gotten it to work with Turl's files. The camera does not work with the newest jokersax as Rodriego uses, so I tried to use Turl's, and it just got stuck on the bootscreen. Thanks in advance.
Click to expand...
Click to collapse
same way, merge turls bin/lib folders into the zip using 7zip
stevendeb25 said:
same way, merge turls bin/lib folders into the zip using 7zip
Click to expand...
Click to collapse
Yeah I thought it would be pretty easy. I used winrar to move the folders to the cna rom zip but still stays on boot animation.
Thought I was going crazy bit other people could not make it work with turls1's files
ovitz said:
you have to choose one version, download and copy to your device
1. run recovery
2. wipe data, cache, dalvik
3. install zip from your device
4. reboot
Click to expand...
Click to collapse
No, the above WILL NOT WORK!!!
However, doing this will work:
get the nightly from
http://cna.exynos.co/olympus/
get the
beta 0.4.3
faux’s 1.0 kernel -outdated (ignore outdated, it´s the right one)
from
http://www.jokersax.com/developer-pages/jokersax/cyanogenmod-9-atrix/
get jokersax gapps v11
from
http://www.jokersax.com/developer-pages/jokersax/cm9-gapps/
in linux, using Q7Z, unzip the CNA nightly and replace the following folders by the ones from Joker´s beta 0.4.3:
bin
lib
xbin
Re-Zip. Be careful not to alter the zip structure or permissions.
In Recovery, flash your modded CNA.zip, THEN flash faux´s kernel, THEN flash gapps.
Enjoy
Hello, I just updated my SGS2 to 4.0.3 and just finished flashing it, now I want to install a theme and these are the instructions:
REQUIREMENTS:
- U need rom without any themes or mods install, otherwise u will end up in bootloop
- Don't flash it even over my CWM packages, bootloop
- Make a backup just in case before flashing
- If u are installing mods from 2nd post, use only with name UNIVERSAL. CWM packages over universal theme will take u to bootloop again
- Uninstall JKAY deluxe settings app (when u flash theme, latest version will be installed)
- If u have any other mods (like phone with no inc. record.full pic), remove it. U will install it latter
- REMOVE ALL MODs PLEASE. U WILL INSTALL THEM ALL, LATTER
- if u have older version of JKAY APP (JkayDeluxeSettings), please uninstall
- Patience, installation is just little bit longer
-If u still got bootloops, but ur buttons are litenin, take out battery, put it back, power ur phone. Now u should not have any more bootloops and ur theme will be installed correctly
- Download the UNIVERSAL.ZIP file from the download section below and DO NOT unzip it
- Copy the UNIVERSAL.ZIP file to your INTERNAL SD card
- Boot your phone into CWM (hold Vol Up, Home & Power Button)
- Wipe cache
- Wipe dalvik cache
- Select 'Install ZIP from SD Card'
- Select 'Choose Zip from SD Card'
- Then select the UNIVERSAL.ZIP file you downloaded
- Reboot
- After this you only have to enjoy
The ones I put in BOLD are the ones I am concerned about, because I just finished flashing my phone, does this mean I cant do it, or do NOT flash after installing the theme? And as for mods what type of mods, like Rom Manager SuperSU and Titanium Backup? Just wondering and all because I am new to this, I had installed a nice theme a while back but it was taken off when I updated to 4.0.3, thanks!
If you just flashed stock ICS (not a custom ROM) then you're fine. That would have removed all mods you had anyways.
Griingo said:
And as for mods what type of mods, like Rom Manager SuperSU and Titanium Backup? Just wondering and all because I am new to this, I had installed a nice theme a while back but it was taken off when I updated to 4.0.3, thanks!
Click to expand...
Click to collapse
These are not mods. These are apps.
ctomgee said:
If you just flashed stock ICS (not a custom ROM) then you're fine. That would have removed all mods you had anyways.
These are not mods. These are apps.
Click to expand...
Click to collapse
I flashed it with "CF-Root-SGS2_XX_OXA_LPS-v5.4-CWM5" and I just installed the theme but it is stuck in bootloop now LOL now what?
Griingo said:
I flashed it with "CF-Root-SGS2_XX_OXA_LPS-v5.4-CWM5" and I just installed the theme but it is stuck in bootloop now LOL now what?
Click to expand...
Click to collapse
That is a CF-Root kernel...
But anyways, try booting to recovery and doing a full wipe. (that may remove the theme you just tried to flash, but I would think you'd rather have a functioning phone...)
ctomgee said:
That is a CF-Root kernel...
But anyways, try booting to recovery and doing a full wipe. (that may remove the theme you just tried to flash, but I would think you'd rather have a functioning phone...)
Click to expand...
Click to collapse
Yeah I was afraid I was going to have to do that :'( Now I gotta setup my phone all over again, would Titanium Backup be able to recover everything I backed up with it?
EDIT: I just did that but it is still stuck in bootloop from that dumb theme :'(
Griingo said:
Yeah I was afraid I was going to have to do that :'( Now I gotta setup my phone all over again, would Titanium Backup be able to recover everything I backed up with it?
Click to expand...
Click to collapse
Should be able to.
Griingo said:
EDIT: I just did that but it is still stuck in bootloop from that dumb theme :'(
Click to expand...
Click to collapse
Wiped user data too? Not just wiped cache and dalvik cache?
ctomgee said:
Should be able to.
Wiped user data too? Not just wiped cache and dalvik cache?
Click to expand...
Click to collapse
Yeap I did that one and it didnt work at all I think I need to download 4.0.3 and flash it back to normal :/ Gonna take me for ever to get a download for it LOL
Griingo said:
Yeap I did that one and it didnt work at all I think I need to download 4.0.3 and flash it back to normal :/ Gonna take me for ever to get a download for it LOL
Click to expand...
Click to collapse
Question... you said above you flashed "CF-Root-SGS2_XX_OXA_LPS-v5.4-CWM5". (which is a kernel, not a firmware or ROM)
Did you operate the phone in between doing that and attempting to flash the theme?
What version of 4.0.3 did you flash before you flashed "CF-Root-SGS2_XX_OXA_LPS-v5.4-CWM5"? Or did you?
ctomgee said:
Question... you said above you flashed "CF-Root-SGS2_XX_OXA_LPS-v5.4-CWM5". (which is a kernel, not a firmware or ROM)
Did you operate the phone in between doing that and attempting to flash the theme?
What version of 4.0.3 did you flash before you flashed "CF-Root-SGS2_XX_OXA_LPS-v5.4-CWM5"? Or did you?
Click to expand...
Click to collapse
Yes I was using my phone testing the new ICS and setting up all my apps and stuff since it was all unorganized then I wanted a theme because the base theme sucks so I downloaded this: https://sites.google.com/site/vertumusworld/downloads/Themes/Ice-Cream-Sandwich-Domination I downloaded the very first one mirror 1 after I had the theme I was going to flash my phone so I Googled my phone numbers I had XXLPS so I found a download and flashed it from that and it was working fine rooted then I went to install the theme now it just bootloops :/
OH!!! I just found a restore option from earlier today when I backed up everything with Titanium Backup right before I installed the mod, it is restoring now I hope that works and I wont install any themes LOL not risking this again lets see if it works!
EDIT: Okay I managed to get my phone back to around January and its all working just missing some apps and stuff but now I cant upgrade via Kies? So im just going to do a full wipe now and then upgrade then restore all apps with Titanium Backup, thanks for everything though
I am trying to flash the new FXP rom on my Xperia P but i keep getting this error :
Code:
format() expects 4 args, got 5
E:Error in 'location of the zip file comes here'
(Status 7)
Any idea on how to fix this ??
I have CWM-based recovery v6.0.1.2 by [email protected]
Open the updater script and delete the first 3 lines that say LT22i. Then flash again
Sent from my ST25i using Tapatalk 2
You have wiped system.
Do never wipe system. It is used to verify that you are trying to install it on the correct device.
Rapier07 said:
Open the updater script and delete the first 3 lines that say LT22i. Then flash again
Sent from my ST25i using Tapatalk 2
Click to expand...
Click to collapse
that doesnt work
DavidMKD said:
that doesnt work
Click to expand...
Click to collapse
Go to "CWM"->"install zip from sdcard"->"toggle signature verification".
Then try to install the edited ROM.
hnl_dk said:
Go to "CWM"->"install zip from sdcard"->"toggle signature verification".
Then try to install the edited ROM.
Click to expand...
Click to collapse
still the same error. I tried that even when I had the first error.
DavidMKD said:
still the same error. I tried that even when I had the first error.
Click to expand...
Click to collapse
The first error is because system has been wiped, so it will only help, if the assert has been removed.
What you could do, is to try to temporarily install a ROM, that does not check for what device it is installed on.
When that is done, are you able to install the FXP ROM, as the other one will setup a new system partition.
What did he exactly wrong ?
It should be?
Wipe cache
Wipe dalvik cache
Format system
Install fxp
Enjoy
Thx
thebrainkafka said:
What did he exactly wrong ?
It should be?
Wipe cache
Wipe dalvik cache
Format system
Install fxp
Enjoy
Thx
Click to expand...
Click to collapse
You may not wipe/format system.
The installation does need system, so make sure that it is installed on the correct phone.
So never wipe/format system yourself.
If it is needed, will the install script do it by itself, when it is needed.
Ok, and there are no issue with older files Which maybe not cleared during Installation when going from gb to ics?
Thx
Hello, I have the same issue, if it can help I solve it by replace the "update-binary" with one I take in a Rom which install well
Excuse for my english.
This may hep you
sau94 said:
I am trying to flash the new FXP rom on my Xperia P but i keep getting this error :
Code:
format() expects 4 args, got 5
E:Error in 'location of the zip file comes here'
(Status 7)
Any idea on how to fix this ??
I have CWM-based recovery v6.0.1.2 by [email protected]
Click to expand...
Click to collapse
I had the same problem when I was flashing MIUI rom weekly update to my Galaxy S3.
When I had this error, I was using CWM Recovery then I flashed Philz Recovery.
I tried to flash ROM again, and It was OK.
I hope, it works for you, too.
oOWeaponXOo said:
Hello, I have the same issue, if it can help I solve it by replace the "update-binary" with one I take in a Rom which install well
Excuse for my english.
Click to expand...
Click to collapse
i got some problem too.. can u explain more details? replace "update-binary" from stock ICS rom or from other rom? my device st25i (xperia u) with xnovathor 4.4.2 Custom rom, i would down grading to Xmiui v4 ICS.
hi =) i know maybe its late but ot end this problem and to let know how to solve to anyway will got this issue the solution is to check ,before flashing the zip, the box to allow the installation of old binaries, it works with an i8260
My girlfriend has a galaxy s2, so i thought i could install the cyanogen mod 10 on it. well i tried a lot, and in the end installed the cyanogenmod 9, and no google apps for me, i forgot to install the gapp zip, so i tried to install it, and I can't, it doesn't work, i can't flash cyanogenmod 10 and not even the cyanogenmod9 that i did in the beggining everytime i try, cwm gets stuck in opening udpate file, and it fails saying it's a bad file.
Jpcsilva said:
My girlfriend has a galaxy s2, so i thought i could install the cyanogen mod 10 on it. well i tried a lot, and in the end installed the cyanogenmod 9, and no google apps for me, i forgot to install the gapp zip, so i tried to install it, and I can't, it doesn't work, i can't flash cyanogenmod 10 and not even the cyanogenmod9 that i did in the beggining everytime i try, cwm gets stuck in opening udpate file, and it fails saying it's a bad file.
Click to expand...
Click to collapse
If you can boot your phone, just download the files (both CM9/10 and GAPPS) again and then install it again through CWM.
Sent from the Matrix
HELP
Donnie Sins said:
If you can boot your phone, just download the files (both CM9/10 and GAPPS) again and then install it again through CWM.
Sent from the Matrix
Click to expand...
Click to collapse
I can't, the phone does not boot anymore, i don't know what to do. what should i do?
Jpcsilva said:
I can't, the phone does not boot anymore, i don't know what to do. what should i do?
Click to expand...
Click to collapse
But you can boot into Recovery mode right? If so, do you have a Nandroid backup you can restore? I hope you do. If not: next time do make a backup
If you don't have it, or you can't enter Recovery, try if you can enter the Download mode so you can flash a rom through Odin.
Good luck
Sent from the Matrix
Hi,
I've been trying to install CM 11 based on Kitkat 4.4.2 on my Xperia P. The following are the details / steps followed:
- The bootloader is unlocked
- The phone is rooted
- CWM 6.0.1.2 is installed ( I think this is the latest available for Xperia P)
1) Downloaded CM11-RC1 from the links in this thread http://forum.xda-developers.com/showthread.php?t=2626639
2) Modified 'updater-script' to get rid of Error 7
3) Extracted 'boot.img' and flashed it using FlashTool in fastboot mode.
After reboot, the phone stops at Sony logo and vibrates once.
4) Pressed the Power button to load CWM Recovery
5) Wiped Data, Cache/Partition, Dalvik Cache
6) Tried to install CM11-RC1 zip file using CWM
Now I get the message "Installation aborted", as soon as the installation begins, without any error code being displayed
I can't seem to get past this step, and don't know where I'm going wrong.
Can anyone please help me out?
Are you sure that your phone is unlocked bootloader ? Did you unlocked yourself ? And you should not change anything in update script because i had flash this rom without problem ...
Sent from my Xperia P using Tapatalk 2
-ss- said:
Are you sure that your phone is unlocked bootloader ? Did you unlocked yourself ? And you should not change anything in update script because i had flash this rom without problem ...
Sent from my Xperia P using Tapatalk 2
Click to expand...
Click to collapse
Yes. The bootloader is unlocked. I did it myself following the instructions on the Sony website.
The installation shows an error 7 if I don't modify the updater script.
Delete sorry
Sent from my Xperia P using Tapatalk
yomayne said:
Yes. The bootloader is unlocked. I did it myself following the instructions on the Sony website.
The installation shows an error 7 if I don't modify the updater script.
Click to expand...
Click to collapse
What i have done with flashing this rom was just followed the OP : format system, format data and format catch then flash ROM and gapps without problem ...
Sent from my Xperia P using Tapatalk 2
-ss- said:
What i have done with flashing this rom was just followed the OP : format system, format data and format catch then flash ROM and gapps without problem ...
Sent from my Xperia P using Tapatalk 2
Click to expand...
Click to collapse
Could it be a version issue? Which one did you flash? I did RC1
Hey I had exactly the same problem. What I did was this:
I used Sony Mobile EMMA to re-install latest stock firmware.
After that I rooted it and Installed CWM 1.0 Nypon, I believe this is CWM somewhere in V6.xxxx (other versions wouldn't work for me..)
I also edited the updater script because it wouldn't pass the assert section, so I deleted this.
After that Recompiled it, (Zip format ofcourse) and copied it to SD card.
Next, I flashed boot.img and rebooted the phone after that. Then access CWM.
Now what I did was userdata/factory reset after that I deleted cache, and last but not least dalvik cache.
After that I flashed the recompiled ROM file and then It passed the status 7 error.
When that was finished I flashed gapps
This was what I did, becuz' I had exactly the same problem. I don't know if this works for you but you might give it a try.
(Sorry for bad Englisch)
(Make sure that your bootloader is unlocked! (To verify, I did try to unlock it again. Then I got a message saying that it was allready unlocked)
ReplayMitta said:
Hey I had exactly the same problem. What I did was this:
I used Sony Mobile EMMA to re-install latest stock firmware.
After that I rooted it and Installed CWM 1.0 Nypon, I believe this is CWM somewhere in V6.xxxx (other versions wouldn't work for me..)
I also edited the updater script because it wouldn't pass the assert section, so I deleted this.
After that Recompiled it, (Zip format ofcourse) and copied it to SD card.
Next, I flashed boot.img and rebooted the phone after that. Then access CWM.
Now what I did was userdata/factory reset after that I deleted cache, and last but not least dalvik cache.
After that I flashed the recompiled ROM file and then It passed the status 7 error.
When that was finished I flashed gapps
This was what I did, becuz' I had exactly the same problem. I don't know if this works for you but you might give it a try.
(Sorry for bad Englisch)
(Make sure that your bootloader is unlocked! (To verify, I did try to unlock it again. Then I got a message saying that it was allready unlocked)
Click to expand...
Click to collapse
Thanks. I'll try doing that. Let's see if it works. Which CM11 build did you flash?
yomayne said:
Thanks. I'll try doing that. Let's see if it works. Which CM11 build did you flash?
Click to expand...
Click to collapse
I flashed RC1 also, I tried almost all nightly's and the RC1 lol but they all wouldn't work before I used this sort of 'method'
Yesterday RC1 workied succesfully for me, today I updated to nightly 25 and everything works fine. Note that once you get passed the installation of RC1, that you can only access the CWM recovery with holding the power button, when your phone vibrates when you see the sony logo.. The CW11 comes with CMW touchable. Goodluck
And did it work?
I've solved my status 7 problem with this video ;
http://www.youtube.com/watch?v=QW1znjDLe-k
gilgin said:
I've solved my status 7 problem with this video ;
http://www.youtube.com/watch?v=QW1znjDLe-k
Click to expand...
Click to collapse
Auful way way to "fix" things.
You can "fix" galaxy ROM to be installed on your phone and brick it permanently, it's already been done.
If you have flashed galaxy kernel you probably won't be able to boot but still able to recover.
Tha asserts are there for a reason.
ChikeD said:
Auful way way to "fix" things.
You can "fix" galaxy ROM to be installed on your phone and brick it permanently, it's already been done.
If you have flashed galaxy kernel you probably won't be able to boot but still able to recover.
Tha asserts are there for a reason.
Click to expand...
Click to collapse
I didn't flash a wrong kernel or rom. İf friend is sure of the right pack to flash, than he can use this method.
I wanted to flash cm nightly 25 (percy's rom) to my xperia p, and the cwm gave status 7 error. Then i have searched a solution for my problem, and i found this video and did what he shows in the video, and i have a cm11 flashed xperia p now. And i also flashed over cm11-weekly.
(sorry if i have a bad english)
gilgin said:
I didn't flash a wrong kernel or rom. İf friend is sure of the right pack to flash, than he can use this method.
I wanted to flash cm nightly 25 (percy's rom) to my xperia p, and the cwm gave status 7 error. Then i have searched a solution for my problem, and i found this video and did what he shows in the video, and i have a cm11 flashed xperia p now. And i also flashed over cm11-weekly.
(sorry if i have a bad english)
Click to expand...
Click to collapse
Sp they released a ROM that cannot be flushed, is that what you say? And no one else reporting it?
Somehow I find it difficult to believe.
If you have followed the instructions I'm sure there would be no problem, or the instructions are incomplete, or there is some issue, either way it's up to the developer to fix it.
Avoid "fixing" errors in this manner or one day you may regret it dearly.
ChikeD said:
Sp they released a ROM that cannot be flushed, is that what you say? And no one else reporting it?
Somehow I find it difficult to believe.
If you have followed the instructions I'm sure there would be no problem, or the instructions are incomplete, or there is some issue, either way it's up to the developer to fix it.
Avoid "fixing" errors in this manner or one day you may regret it dearly.
Click to expand...
Click to collapse
I have followed the instructions in a good way and this was the problem i have lived. Some of my friends lived this problem in a Turkish Forum and i recommended this way, they did it and flash the rom. I will give the link here; http://forum.donanimhaber.com/m_58138440/mpage_242/f_//tm.htm#87204228
My nick is ENG_civ on that forum. Everything is right about the rom but something goes in a wrong way, so this way makes the compiler not asking "is this right rom?", that's all. İn my opinion, if you are sure of the rom, there is no risk.
And i am new in this forum, and i couldn't write at development part, and this is the first time i am writing to a foreign language forum. So i couldn't reported them, and these rom's are not the final, so there could be faults on them i think.
gilgin said:
I've solved my status 7 problem with this video ;
(video)
Click to expand...
Click to collapse
I solved the problem with the CM11 this way too. But when I tried to install gapps after install cm11 appear the "status 7". What can I do?
Edit: I can flash the normal cm11 (without edit the .txt) but the problem with the gapps continues. I turned on my phone and then the cyanogenmod logo start running and don't leave this screen. Anyone can help me?
Error:
set_metadata_recursive: some changes failed
E:Error in /storage/sdcard0/gapps-kk-20140105.signed.zip (status 7)
Installation aborted.
nortonz said:
I solved the problem with the CM11 this way too. But when I tried to install gapps after install cm11 appear the "status 7". What can I do?
Edit: I can flash the normal cm11 (without edit the .txt) but the problem with the gapps continues. I turned on my phone and then the cyanogenmod logo start running and don't leave this screen. Anyone can help me?
Error:
set_metadata_recursive: some changes failed
E:Error in /storage/sdcard0/gapps-kk-20140105.signed.zip (status 7)
Installation aborted.
Click to expand...
Click to collapse
For gapps its normal. Its actually flashed
Sent from my Xperia P using Tapatalk
AndroidNoob69 said:
For gapps its normal. Its actually flashed
Sent from my Xperia P using Tapatalk
Click to expand...
Click to collapse
How "normal" ?
PS: now my celphone has cyanogenmod 11 ! I'm so glad and grateful for this post!
nortonz said:
How "normal" ?
Click to expand...
Click to collapse
'normal' as in everyone has it. The zip is actually flashed.
Sent from my Xperia P using Tapatalk
It worked!
Thanks so much ! I'm finally running 4.4.2